Console Output
Skipping 49 KB..
Full Log]
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1018): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA6]
call eqa6(pcond,tttemp,qadjw,qvtemp,qctemp,qsatv,qsati,pr
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1027): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA12]
call eqa12(prevp,qrtemp,qvtemp,qadjw,qsatv,rbar2d,tttemp,sfrain
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1039): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA27]
call eqa27(pmltse,qstemp,qvtemp,qsatv,qadjw,tttemp,terma,apbp
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1049): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA19G]
if(lgrpl)call eqa19g(pmltge,qgtemp,tttemp,qvtemp,qsatv
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1059): warning #8889: Explicit interface or EXTERNAL declaration is required. [NRMTQW]
call nrmtqw(qvtemp,qgtemp,qrtemp,qstemp,qadjw,qctemp,tttemp
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1072): warning #8889: Explicit interface or EXTERNAL declaration is required. [QSATVI]
call qsatvi(tttemp,pr,qsatv,qsati,lice,mkk)
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1074): warning #8889: Explicit interface or EXTERNAL declaration is required. [SLOPE]
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1187): warning #8889: Explicit interface or EXTERNAL declaration is required. [QSATVI]
call qsatvi(tdum,pr,qvsdum,qsidum,lice,mkk)
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1188): warning #8889: Explicit interface or EXTERNAL declaration is required. [QTADJ]
call qtadj(tdum,qdum,pr,qvsdum,qsidum,qadj,tadj
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1197): warning #8889: Explicit interface or EXTERNAL declaration is required. [QTADJ]
call qtadj(tttemp,qvtemp,pr,qsatv,qsati,qadj,tadj,heatlv
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1205): warning #8889: Explicit interface or EXTERNAL declaration is required. [CONICE]
call conice(nitemp,nuci,tttemp,qvtemp,qsatv,qsati,qctemp,qitemp
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1226): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA15]
call eqa15(pint,tttemp,qvtemp,qsati,qadj,rbar2d,nitemp,tice
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1235): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA18]
call eqa18(pdepi,qvtemp,qitemp,qsati,qadj,tttemp,rbar2d,nitemp
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1244): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA26]
call eqa26(psdep,qvtemp,qstemp,qsati,qadj,terma,appbpp,tttemp
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1252): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA17G]
if(lgrpl)call eqa17g(pgdep,qgtemp,tttemp,qvtemp,qsati,xa
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1261): warning #8889: Explicit interface or EXTERNAL declaration is required. [NRMTQI]
call nrmtqi(qvtemp,qitemp,qgtemp,qstemp,qadj,tttemp,pgdep
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1274): warning #8889: Explicit interface or EXTERNAL declaration is required. [SLOPE]
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1285): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA7]
call eqa7(praut,qctemp,rbar2d,nctemp,praut1,praut2,pi
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1293): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA9]
call eqa9(pracw,qctemp,qrtemp,pterm4,sfrain,xa,rbar2d,nctemp
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1390): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQG]
call tgqg(fallg,qgtemp,sfgraup,pterm4,pcut,abar,bgrp,mkk)
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1392): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQS]
call tgqs(falls,qstemp,sfsnow,pterm4,pcut,aprpr,bsnow,mkk)
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1400): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA19]
call eqa19(pconv,qitemp,rbar2d,nitemp,tttemp,pcut,cimass
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1408): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA10G]
if(lgrpl)call eqa10g(pwacs,qstemp,qctemp,rbar2d,tttemp
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1417): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA21]
call eqa21(psaci,qitemp,qstemp,sfsnow,termb
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1425): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA5G]
if(lgrpl)call eqa5g(praci,qitemp,qrtemp,tttemp,iwx1,gm3,gm4
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1434): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA12G]
if(lgrpl)call eqa12g(pgaci,qitemp,qgtemp,tttemp,sfgraup,xa,iwx1
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1442): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA14G]
if(lgrpl)call eqa14g(pgacs,qstemp,qgtemp,tttemp,rbar2d
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1451): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA20G]
if(lgrpl)call eqa20g(pgshr,pgacr,pgacw,tttemp,rbar2d,tzero
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(1461): warning #8889: Explicit interface or EXTERNAL declaration is required. [NRMCOL]
call nrmcol(tttemp,qctemp,qitemp,qgtemp,qrtemp,qstemp,pconv,pgaci
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(2): remark #7712: This variable has not been used. [P3]
1 (cond,p3,qc3,qi3,qr3,qg3,qs3,qv3,th3,w3,pr3d
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(2): remark #7712: This variable has not been used. [W3]
1 (cond,p3,qc3,qi3,qr3,qg3,qs3,qv3,th3,w3,pr3d
---------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(3): remark #7712: This variable has not been used. [WTM]
2 ,qsatv3d,temp3d,qsati3d,th2t3d,wtm,exbm,rbm
---------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(3): remark #7712: This variable has not been used. [EXBM]
2 ,qsatv3d,temp3d,qsati3d,th2t3d,wtm,exbm,rbm
-------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(5): remark #7712: This variable has not been used. [TIMEA]
4 ,pcut,p00,r,rvap,sloper,slopes,slopeg,timea,lice
----------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(6): remark #7712: This variable has not been used. [NNE]
5 ,nne,kk,i1d,j1d,ary1d,i1dflg,n1d,maxpt1d,maxvr1d
---------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(9): remark #7712: This variable has not been used. [CPOR]
8 ,cbeta,cnzero,cimass,cpor,cw,difvap,erc,esi,eic
-----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(9): remark #7712: This variable has not been used. [DIFVAP]
8 ,cbeta,cnzero,cimass,cpor,cw,difvap,erc,esi,eic
-------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(10): remark #7712: This variable has not been used. [MW]
9 ,eri,egc,esc,esr,egi,egr,egs,mw,pi,praut1,praut2
-------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBP3]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBOV2]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
---------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBOV2G]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
----------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PCOND3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
---------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PSMLTI3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PSACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PGACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
-------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PIACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
--------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PCHOMO3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
---------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PRAUT3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
-----------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PRACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
------------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PDEPI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
---------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PINT3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PGDEP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PCONV3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
-----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PSACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PGACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
-------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PRACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
--------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PREVP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
---------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PSDEP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PMLTGE3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
---------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGMLT3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PSMLT3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGACRM3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGACWM3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
---------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PRACS3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-----------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGSHR3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PGACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
---------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PSACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PIACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
-----------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PRHOMO3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PGACS3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
--------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PMLTSE3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
---------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PWACS3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
-----------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(242): remark #7712: This variable has not been used. [IC]
integer ic
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(247): remark #7712: This variable has not been used. [IP]
integer ip
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(249): remark #7712: This variable has not been used. [JP]
integer jp
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(251): remark #7712: This variable has not been used. [M]
integer m
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(253): remark #7712: This variable has not been used. [N]
integer n
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(256): remark #7712: This variable has not been used. [NP]
integer np
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(257): remark #7712: This variable has not been used. [NPTS]
integer npts
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(331): remark #7712: This variable has not been used. [SAT]
real sat
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(348): remark #7712: This variable has not been used. [WGT]
real wgt (len)
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/adjtq.F(356): remark #7712: This variable has not been used. [TMP1]
real tmp1 (len)
----------------^
[ 52%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa12.F.o
[ 52%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa12g.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa12g.F(50): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,gm3pb)
-----------^
[ 52%] Linking Fortran static library libmicrophys_utils_lib.a
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa12.F(35): remark #7712: This variable has not been used. [TWODT]
real twodt
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa12.F(55): remark #7712: This variable has not been used. [QCOND]
real qcond
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa12.F(56): remark #7712: This variable has not been used. [QEVAP]
real qevap
-----------^
[ 52%] Built target microphys_utils_lib
[ 53%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa13g.F.o
[ 54%] Linking Fortran static library libtext_writer_lib.a
Scanning dependencies of target KK_microphys_lib
Scanning dependencies of target morrison_microphys_lib
[ 54%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Parabolic_constants.f90.o
[ 55%] Building Fortran object src/Microphys/Morrison_microphys/CMakeFiles/morrison_microphys_lib.dir/module_mp_graupel.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa13g.F(1): remark #7712: This variable has not been used. [TT]
subroutine eqa13g(pgacr,qr,qg,tt,rho,fallr,fallg
------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa13g.F(4): remark #7712: This variable has not been used. [TZERO]
2 ,delt,pcut,tzero,len)
------------------------^
[ 55%] Built target text_writer_lib
[ 55%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/parameters_KK.F90.o
[ 55%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa14g.F.o
[ 55%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugsrad_physconst.F90.o
[ 55%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa15.F.o
[ 55%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugsrad_planck.F90.o
[ 56%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/AiryFunction.f90.o
[ 56%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa17g.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6326): remark #7712: This variable has not been used. [I]
INTEGER:: i, k, k_0
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(749): remark #7712: This variable has not been used. [ITIMESTEP]
SUBROUTINE MP_GRAUPEL(ITIMESTEP, &
----------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(750): remark #7712: This variable has not been used. [TKE]
TH, QV, QC, QR, QI, QS, QG, NI, NC, NS, NR, NG, TKE, NCTEND, &
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [RHO]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch[ 56%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa18.F.o
/src/Microphys/Morrison_microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [HT]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IMS]
IMS,IME, JMS,JME, KMS,KME,&
------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IME]
IMS,IME, JMS,JME, KMS,KME,&
----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JMS]
IMS,IME, JMS,JME, KMS,KME,&
---------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JME]
IMS,IME, JMS,JME, KMS,KME,&
-------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
---------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
-------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QGSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QRSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-----------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QNISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
---------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QCSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
------------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1231): remark #7712: This variable has not been used. [PCCN]
REAL, DIMENSION(KMS:KME) :: PCCN ! CHANGE Q DROPLET ACTIVATION
----------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1316): remark #7712: This variable has not been used. [COFFI]
REAL COFFI ! ICE AUTOCONVERSION PARAMETER
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1325): remark #7712: This variable has not been used. [RHO2]
REAL FALTNDR,FALTNDI,FALTNDNI,RHO2
------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5435): remark #7712: This variable has not been used. [DUM]
REAL DUM
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1350): remark #7712: This variable has not been used. [DUMQSI]
REAL DUM,DUM1,DUM2,DUMT,DUMQV,DUMQSS,DUMQSI,DUMS,TMPNUM
------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1382): remark #7712: This variable has not been used. [CT]
REAL CT ! DROPLET ACTIVATION PARAMETER
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1383): remark #7712: This variable has not been used. [TEMP1]
REAL TEMP1 ! DUMMY TEMPERATURE
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1384): remark #7712: This variable has not been used. [SAT1]
REAL SAT1 ! DUMMY SATURATION
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1386): remark #7712: This variable has not been used. [KEL]
REAL KEL ! KELVIN PARAMETER
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [CRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [KRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMQI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMNI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DC0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DS0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
--------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DG0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1394): remark #7712: This variable has not been used. [DUMQR]
REAL DUMQC,DUMQR,RATIO,SUM_DEP,FUDGEF
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1397): remark #7712: This variable has not been used. [WEF]
REAL WEF
----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [ANUC]
REAL ANUC,BNUC
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [BNUC]
REAL ANUC,BNUC
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5967): remark #7712: This variable has not been used. [LAMBDA]
meltratio_outside, m_w, m_i, lambda, C_back, &
--------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5904): remark #7712: This variable has not been used. [SIGMA]
REAL(8):: alpha,lambdas,sigma,nenner
------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5981): remark #7712: This variable has not been used. [XW_A]
REAL(8):: D_large, D_g, rhog, x_w, xw_a, fm, fmgrenz, &
-----------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [II]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [JJ]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
----------------------------------------^
[ 57%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/cloud_correlate.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa18.F(2): remark #7712: This variable has not been used. [J]
1 ,appbpp,tice,delt,pcut,j,icon,len)
---------------------------------------------^
[ 58%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa18g.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/cloud_correlate.F90(9): remark #7712: This variable has not been used. [LEN_LOC]
subroutine bugs_ctot(nlen, len_loc, nlm, pl2,tl, acld, l_c, c_tot)
------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/cloud_correlate.F90(28): remark #7712: This variable has not been used. [I_LAY_B]
i_lay_a, i_lay_b, i_domain, Ncloud, kcld, j ! Indices
------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/cloud_correlate.F90(140): remark #7712: This variable has not been used. [CF_TMP]
real(kind=dbl_kind), dimension(nlm) :: cf_tmp
----------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/cloud_correlate.F90(144): remark #7712: This variable has not been used. [CF_STACKED_THRESH]
real(kind=dbl_kind) :: cf_stacked_thresh, &
-------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/cloud_correlate.F90(145): remark #7712: This variable has not been used. [CF_STACKED_MIN]
cf_stacked_min
-------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/cloud_correlate.F90(146): remark #7712: This variable has not been used. [CF_STACKED_MIN_SET]
integer(kind=int_kind) :: cf_stacked_min_set
----------------------------------^
[ 58%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/newexp.F90.o
[ 59%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_rad.F.o
[ 59%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/cloudg.F.o
[ 59%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa19.F.o
[ 59%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa19g.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa19.F(1): remark #7712: This variable has not been used. [TT]
subroutine eqa19(pconv,qi,rho,conci,tt,pcut,cimass,delt,len)
------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_rad.F(586): warning #8889: Explicit interface or EXTERNAL declaration is required. [BUGS_LWR]
call bugs_lwr
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_rad.F(709): warning #8889: Explicit interface or EXTERNAL declaration is required. [BUGS_SWR]
call bugs_swr
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_rad.F(27): remark #7712: This variable has not been used. [QRIL]
+, qcwl , qcil , qril , o3l
-----------------------------------------------^
[ 59%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_local_means.F90.o
[ 59%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa20g.F.o
[ 59%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/comscp1.F.o
[ 59%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/comscp2.F.o
[ 59%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/rayle.F.o
[ 60%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa21.F.o
[ 60%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa21g.F.o
[ 60%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa21g.F(1): remark #7712: This variable has not been used. [RHO]
subroutine eqa21g(pgacrm,pgacr,tt,rho,qg,tzero
----------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa21g.F(29): remark #7712: This variable has not been used. [NPTS]
integer npts
--------------^
[ 61%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_iter.F.o
[ 61%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa22.F.o
[ 61%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa22g.F.o
/home/jenki/ns/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa22g.F(1): remark #7712: This variable has not been used. [RHO]
subroutine eqa22g(pgacwm,pgacw,tt,rho,qg,tzero
----------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa22g.F(29): remark #7712: This variable has not been used. [NPTS]
integer npts
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa22.F(1): remark #7712: This variable has not been used. [TZERO]
subroutine eqa22(psacw,qc,qs,tt,termb,esc,pcut,delt,tzero,len)
----------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa22.F(13): remark #7712: This variable has not been used. [IFLAG]
integer iflag
--------------^
home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_iter.F(135): remark #7712: This variable has not been used. [FAIL]
& fail
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_iter.F(12): remark #7712: This variable has not been used. [SEL_RULES]
+, sel_rules , b1 , b2 , b3
---------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_iter.F(113): remark #7712: This variable has not been used. [EXPTAU]
&, exptau !
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_iter.F(128): remark #7712: This variable has not been used. [PROP]
&, kappa , oms , prop ,r, rinf
--------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_iter.F(138): remark #7712: This variable has not been used. [TAUSTHRESH]
& tausthresh
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_iter.F(139): remark #7712: This variable has not been used. [WCTHRESH]
&, wcthresh
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_iter.F(140): remark #7712: This variable has not been used. [TAUSCAT]
&, tauscat
--------^
[ 61%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa25.F.o
[ 61%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_ocastrndm.F90.o
[ 62%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa26.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(3): remark #7712: This variable has not been used. [CLDAMT]
ib , cldamt , wc_cld, wc_clr, &
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(109): remark #7712: This variable has not been used. [EXPTAU]
exptau
-----^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(121): remark #7712: This variable has not been used. [CLD_RAN]
cld_ran, & !The random overlap fraction of cloud
-----^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(122): remark #7712: This variable has not been used. [CMIN]
cmin !Minimum cloud fraction in a column
-----^
[ 62%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_sel.F.o
[ 62%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa27.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa27.F(2): remark #7712: This variable has not been used. [J]
1 ,snzero,tzero,pcut,delt,j,len)
----------------------------------------------^
[ 62%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa27r.F.o
[ 62%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa28.F.o
[ 62%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_bs.F.o
[ 63%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw.F.o
[ 63%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_iter.F.o
[ 64%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa5g.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_bs.F(142): remark #7712: This variable has not been used. [FAIL]
& fail
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_bs.F(11): remark #7712: This variable has not been used. [SEL_RULES]
+, fddif ,sel_rules , b1 , b2
-----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_bs.F(145): remark #7712: This variable has not been used. [TAUSTHRESH]
& tausthresh
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_bs.F(146): remark #7712: This variable has not been used. [WCTHRESH]
&, wcthresh
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_bs.F(147): remark #7712: This variable has not been used. [TAUSCAT]
&, tauscat
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_iter.F(139): remark #7712: This variable has not been used. [FAIL]
& fail
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_iter.F(11): remark #7712: This variable has not been used. [SEL_RULES]
+, fddif ,sel_rules , b1 , b2
-----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_iter.F(142): remark #7712: This variable has not been used. [TAUSTHRESH]
& tausthresh
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_iter.F(143): remark #7712: This variable has not been used. [WCTHRESH]
&, wcthresh
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_iter.F(144): remark #7712: This variable has not been used. [TAUSCAT]
&, tauscat
--------^
[ 64%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Parabolic.f90.o
[ 64%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa6.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa6.F(1): remark #7712: This variable has not been used. [TT]
subroutine eqa6(pcond,tt,qadj,qv,qc,qsatv,qsati,pp,w1,w2
----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa6.F(1): remark #7712: This variable has not been used. [QSATI]
subroutine eqa6(pcond,tt,qadj,qv,qc,qsatv,qsati,pp,w1,w2
------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa6.F(1): remark #7712: This variable has not be[ 64%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa7.F.o
en used. [PP]
subroutine eqa6(pcond,tt,qadj,qv,qc,qsatv,qsati,pp,w1,w2
------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa6.F(2): remark #7712: This variable has not been used. [HEATLV]
1 ,iwx1,heatlv,cp,delt,pcut,j,len)
---------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa6.F(2): remark #7712: This variable has not been used. [CP]
1 ,iwx1,heatlv,cp,delt,pcut,j,len)
----------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa6.F(2): remark #7712: This variable has not been used. [J]
1 ,iwx1,heatlv,cp,delt,pcut,j,len)
-----------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa6.F(39): remark #7712: This variable has not been used. [ITER]
integer iter
--------------^
[ 64%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_ocastrndm.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/two_rt_sw_ocastrndm.F90(7): remark #7712: This variable has not been used. [CLDAMT]
cldamt , c_maximal , cf_max, cf_random )
-----^
[ 64%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa7g.F.o
[ 64%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa8g.F.o
[ 65%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa9.F.o
[ 65%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa9g.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa9.F(1): remark #7712: This variable has not been used. [RHO]
subroutine eqa9(pracw,qc,qr,pterm4,sr,sri,rho,nc,icomp,pi,erc
------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa9.F(36): remark #7712: This variable has not been used. [RVC]
real rvc
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/eqa9.F(37): remark #7712: This variable has not been used. [RVCOF]
real rvcof
-----------^
[ 65%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esati.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esati.F(47): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESAT_NEW]
call esat_new(t,w1,m,l_ice)
-------------^
[ 65%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esat_new.F.o
[ 66%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esatv.F.o
[ 66%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/frzh.F.o
[ 66%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/gamma.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(51): remark #7712: This variable has not been used. [WICE]
real ESH2O,WICE,WH2O
-----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(51): remark #7712: This variable has not been used. [WH2O]
real ESH2O,WICE,WH2O
----------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(52): remark #7712: This variable has not been used. [ESBLD]
real ESICE,ESBLD
-----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(55): remark #7712: This variable has not been used. [VABLD]
real VABLD
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(58): remark #7712: This variable has not been used. [XLBLD]
real XLBLD
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(62): remark #7712: This variable has not been used. [II]
integer ii
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(63): remark #7712: This variable has not been used. [J]
integer j
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(64): remark #7712: This variable has not been used. [VPS]
real qcon,rq,vps,var
-------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(64): remark #7712: This variable has not been used. [VAR]
real qcon,rq,vps,var
-----------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(66): remark #7712: This variable has not been used. [QQQ]
real t1,qqq,tqs,temc
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(66): remark #7712: This variable has not been used. [TQS]
real t1,qqq,tqs,temc
------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esat_new.F(74): remark #7712: This variable has not been used. [L_XL]
logical l_xl
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/esatv.F(47): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESAT_NEW]
call esat_new(t,w1,m,l_ice)
-------------^
[ 66%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/gascon.F.o
[ 66%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmcol.F.o
[ 67%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/gases_ckd.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/gascon.F(98): warning #8889: Explicit interface or EXTERNAL declaration is required. [PARM_CKD24]
tgm(i,l) = parm_ckd24(iflb(ib),amnt,patm,tt(i,l),dz)
--------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(1): remark #7712: This variable has not been used. [TTTEMP]
subroutine nrmcol(tttemp,qctemp,qitemp,qgtemp,qrtemp,qstemp
-------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(3): remark #7712: This variable has not been used. [TT]
2 ,rho,nc,nr,ncn,pcut,twodt,lice,lgrpl,tt,rvc
-------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [ARY1D]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
-------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [I1DFLG]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
--------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [I1D]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
---------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [J1D]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
-------------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [J]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
-----------------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(5): remark #7712: This variable has not been used. [ICOMP]
4 ,icomp,ldrizzle,ni,m,len)
-------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(5): remark #7712: This variable has not been used. [NI]
4 ,icomp,ldrizzle,ni,m,len)
----------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmcol.F(59): remark #7712: This variable has not been used. [K]
integer k
---------------^
[ 67%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmtqi.F.o
[ 68%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmtqw.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(3): remark #7712: This variable has not been used. [LGRPL]
2 ,lsocp,tzero,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d
-------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(3): remark #7712: This variable has not been used. [ARY1D]
2 ,lsocp,tzero,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d
-------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [I1DFLG]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
-------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [I1D]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
--------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [J1D]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [J]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
----------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [ICOMP]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/C[ 68%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/qsatvi.F.o
OAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [TH2T]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [CONCI]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
-----------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(12): remark #7712: This variable has not been used. [IP]
integer ip
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(14): remark #7712: This variable has not been used. [JP]
integer jp
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(15): remark #7712: This variable has not been used. [KK]
integer kk
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(21): remark #7712: This variable has not been used. [NP]
integer np
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(52): remark #7712: This variable has not been used. [K]
integer k
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqi.F(56): remark #7712: This variable has not been used. [TP3]
real tp3
------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(3): remark #7712: This variable has not been used. [ARY1D]
2 ,lvocp,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg
-------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(3): remark #7712: This variable has not been used. [I1DFLG]
2 ,lvocp,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg
--------------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [I1D]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [J1D]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-----------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [J]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
---------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [TH2T]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
--------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [HEATLV]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [CP]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
--------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [RVAP]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-----------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [QSATV]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
----------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(18): remark #7712: This variable has not been used. [KK]
integer kk
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(21): remark #7712: This variable has not been used. [M]
integer m
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/nrmtqw.F(61): remark #7712: This variable has not been used. [K]
integer k
---------------^
[ 68%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/qtadj.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/qsatvi.F(31): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESATV]
call esatv(t,qvs,len)
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/qsatvi.F(38): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESATI]
call esati(t,qvi,len)
-------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/qtadj.F(1): remark #7712: This variable has not been used. [PR]
subroutine qtadj(tt,qv,pr,qsatv,qsati,qadj,tadj,heatlv
-----------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/qtadj.F(2): remark #7712: This variable has not been used. [LICE]
1 ,heatls,cp,rvap,tzero,lice,iflag,pcut,len)
------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/qtadj.F(12): remark #7712: This variable has not been used. [IMPLFLG]
integer implflg
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/qtadj.F(14): remark #7712: This variable has not been used. [N]
integer n
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/qtadj.F(22): remark #7712: This variable has not been used. [QSAT]
real qsat
-----------^
[ 68%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/slope.F.o
[ 68%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqg.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqg.F(40): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,tvs1)
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqg.F(30): remark #7712: This variable has not been used. [PFACT]
real pfact
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqg.F(32): remark #7712: This variable has not been used. [X6]
real x6
-----------^
[ 69%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqi.F.o
[ 69%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqr.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqi.F(1): remark #7712: This variable has not been used. [CIMASS]
subroutine tgqi(fallv,qi,rbm,pr,conci,pcut,p00,cimass,dmax,len)
-----------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqi.F(33): remark #7712: This variable has not been used. [FALSPD]
real falspd
-----------^
[ 69%] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqs.F.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqr.F(31): remark #7712: This variable has not been used. [K]
integer k
--------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqs.F(45): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,tvs1)
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqs.F(31): remark #7712: This variable has not been used. [PFACT]
real pfact
-----------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/COAMPS_microphys/tgqs.F(33): remark #7712: This variable has not been used. [X6]
real x6
-----------^
[ 69%] Linking Fortran static library libcoamps_lib.a
[ 69%] Built target coamps_lib
[ 70%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_utilities.F90.o
[ 70%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_means.F90.o
[ 70%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_covar.F90.o
[ 71%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_all_MM.F90.o
[ 71%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_means.F90.o
[ 71%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_variances.F90.o
[ 72%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_turbulent_sed.F90.o
[ 72%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_covariances.F90.o
[ 72%] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_Nrm_tendencies.F90.o
[ 72%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_lwr.F.o
[ 72%] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_swr.F.o
[ 72%] Linking Fortran static library libKK_microphys_lib.a
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_lwr.F(295): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_plot_solver_c/omhpoamree/_jebnrkainncsh//wsorrkcs/pRaacdei/actliuobnb/_BpUlGoStr_asdo/lvbeurg_sc_olmwpra.rFe(_3b0r3a)n:c hw/asrrnci/nRga d#i8a8t8i9o:n /EBxUpGlSircaidt/ biungtse_rsfwarc.eF (o3r3 2E)X:T EwaRNrAnL idnecgl ar#a8t8i8on9 :i sE xrpelqiuciirte di.n t e r[fCaLcOeU DoGr]
EXT call cloudg
E--------------^
RNAL declaration is required. [RAYLE]
call rayle
/h--------------^
ome/jenkins/workspace/clubb_plot_so/lhvoemre_/cjoemnpkairnes_/bwroarnkcshp/ascrec//cRlaudbiba_tpiloont/_BsUoGlSvreard_/cboumgpsa_rlew_rb.rFa(n3c2h3/)s:r cw/aRrandiinagt i#o8n8/8B9U:G SErxapdl/ibcuigts _isnwtre.rFf(a3c4e1 )o:r wEaXrTnEiRnNgA L# 8d8e8c9l:a rEaxtpiloinc iits irnetqeurifraecde. o r [EGXATSECRONNA]L
decl call gascon
a--------------^
ration is required. [CLOUDG]
call cloudg
/--------------^
home/jenkins/workspace/club/bh_opmleo/tj_esnoklivnesr/_wcoormkpsapraec_eb/rcalnucbhb/_sprlco/tR_asdoilavteiro_nc/oBmUpGaSrrea_db/rbaungcsh_/lswrrc./FR(a3d3i4a)t:i owna/rBnUiGnSgr a#d8/8b8u9g:s _Esxwprl.iFc(i3t4 9i)n:t ewrafrancien go r# 8E8X8T9E:R NEAxLp ldieccilta rianttieornf aicse roerq uEiXrTeEdR.N A L [dCeOcMlSaCrPa1t]i
on call comscp1
i--------------^
s required. [CLOUDG]
call cloudg
--------------^
/ho/mheo/mjee/njkeinnksi/nwso/rwkosrpkascpea/ccelu/bcbl_upblbo_tp_lsooltv_esro_lcvoemrp_acroem_pbarraen_cbhr/asnrcch//Rsardci/aRtaidoina/tBiUoGnS/rBaUdG/Sbruagds/_bluwgrs._Fs(w3r5.8F)(:3 6w9a)r:n iwnagr n#i8n8g8 9#:8 8E8x9p:l iEcxiptl iicnitte rifnatceer foarc eE XoTrE RENXATLE RdNAeLc ldaercaltairoant iiosn riesq urierqeudi.r e d .[ C O M[SCCOPM2S]C
P1] call comscp2
-----------------^
call comscp1
-------------^
/home/jenkins/workspace/clubb/_hpolmoet/_jseonlkvienrs_/cwoomrpkasrpea_cber/acnlcuhb/bs_rpcl/oRta_dsioaltvieorn_/cBoUmGpSarraed_/bbruagnsc_hl/wsrr.cF/(R3a8d4i)a:t iwoanr/nBiUnGgS r#a8d8/8b9u:g sE_xspwlri.cFi(t3 9i3n)t:e rwfaarcnei nogr #E8X8T8E9R:N AELx pdleiccliatr aitnitoenr fiasc er eoqru iErXeTdE.R N A L[ TdWeOc_lRaTr_aLtWi]o
n i call two_rt_lw
s-----------------^
required. [COMSCP2]
call comscp2
-----------------^
/home/jenkins/workspace/cl/uhbobm_ep/ljoetn_ksionlsv/ewro_rckosmppaacree/_cblruabnbc_hp/lsortc_/sRoaldvieart_icoomnp/aBrUeG_Sbrraadn/cbhu/gssr_cl/wRra.dFi(a3t9i1o)n:/ BwUaGrSnriandg/ b#u8g8s8_9s:w rE.xFp(l4ic0i2t) :i nwtaerrnfiancge #o8r8 8E9X:T EERxNpAlLi cdietc lianrtaetrifoanc ei so rr eEqXuTiErReNdA.L d e[cTlWaOr_aRtTi_oLnW ]i
s call two_rt_lw
r-----------------^
equired. [TWO_RT_SW]
call two_rt_sw
-----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_swr.F(409): warning #8889: Explicit interface or EXTERNAL declaration is req/uhiroemde./ j e n[kTiWnOs_/RwTo_rSkWs]p
ace call two_rt_sw
/-----------------^
clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_lwr.F(22): remark #7712: This variable has not been used. [CLDAMT]
+, cirho , o3mix , ts , cldamt
---------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not /bheoemne /ujseendk.i n s /[wCoLrDkMsApXa]c
e/ +, cldmax , b1 , b2 , b3
c-------------------------^
lubb_plot/_hsoomlev/ejre_nckoimnpsa/rweo_rbkrsapnacche//scrlcu/bRba_dpilaotti_osno/lBvUeGrS_rcaodm/pbaurges__bsrwarn.cFh(/2s6r)c:/ Rraedmiaartki o#n7/7B1U2G:S rTahdi/sb uvgasr_ilawbrl.eF (h2a3s) :n orte mbaerekn #u7s7e1d2.: T h[iTsS ]v
ariabl +, cirho , o3mix , ts , amu0
e------------------------------------------------^
has /nhootm eb/ejeenn kuisnesd/.w o r k[sBp1a]c
e/ +, cldmax , b1 , b2 , b3
c--------------------------------------^
lubb/_hpolmoet/_jseonlkvienrs_/cwoomrpkasrpea_cber/acnlcuhb/bs_rpcl/oRta_dsioaltvieorn_/cBoUmGpSarraed_/bbruagnsc_hs/wsrr.cF/(R2a8d)i:a trieomna/rBkU G#S7r7a1d2/:b uTghsi_sl wvra.rFi(a2b3l)e: hraesm anrokt #b7e7e1n2 :u sTehdi.s v a[rCiLaDbAlMeT ]h
as +, alndr , cldamt , cldmax , umco2
n---------------------------------^
ot been /uhsoemde./ j e[nBk2i]n
s/ +, cldmax , b1 , b2 , b3
w----------------------------------------------^
orks/phaocmee//cjleunbkbi_npsl/owto_rskoslpvaecre_/ccolmupbabr_ep_lborta_nscohl/vserrc_/cRoamdpiaartei_obnr/aBnUcGhS/rsardc//bRuagdsi_astwiro.nF/(B2U8G)S:r arde/mbaurgks _#l7w7r1.2F:( 2T3h)i:s rveamrairakb l#e7 7h1a2s: nTohti sb eveanr iuasbelde. h a s[ CnLoDtM AbXe]e
n +, alndr , cldamt , cldmax , umco2
u--------------------------------------------^
sed. / h o[mBe3/]j
enk +, cldmax , b1 , b2 , b3
i-------------------------------------------------------^
ns/w/ohrokmsep/ajceen/kcilnusb/bw_oprlkostp_ascoel/vcelru_bcbo_mpplaorte__sborlavnecrh_/csormcp/aRraed_ibartainocnh//BsUrGcS/rRaadd/ibautgiso_n/sBwUrG.SFr(a2d/9b)u:g sr_elmwarr.kF (#2747)1:2 :r eTmhairsk v#a7r7i1a2b:l eT hhiass vnaorti abbeleen huasse dn.ot b e[eBn1 ]u
se +, umch4 , umn2o , b1 , b2
d------------------------------------------------^
. [/Bh4o]m
e/ +, b4 , umco2 , umch4 , umn2o
j-----------------------------^
enkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_swr.F(29): remark #7712: This variable has not been used. [B2]
+, umch4 , umn2o , b1 , b2
-----------------------------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B3]
+, b3 , b4 , fdsw , fdswcl
---------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B4]
+, b3 , b4 , fdsw , fdswcl
-------------------------------------^
[ 72%] Built target KK_microphys_lib
Scanning dependencies of target silhs_lib
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/parameters_silhs.F90.o
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/mt95.F90.o
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_arrays.F90.o
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/est_kessler_microphys_module.F90.o
[ 74%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/transform_to_pdf_module.F90.o
[ 74%] Linking Fortran static library libbugsrad_lib.a
[ 74%] Built target bugsrad_lib
[ 74%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/math_utilities.F90.o
[ 74%] Linking Fortran static library libmorrison_microphys_lib.a
[ 74%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/generate_uniform_sample_module.F90.o
[ 74%] Built target morrison_microphys_lib
[ 75%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/lh_microphys_var_covar_module.F90.o
[ 75%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_importance_sample_module.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/SILHS/silhs_importance_sample_module.F90(901): warning #5462: Global name too long, shortened from: silhs_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER to: s_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER
num_categories_in_cluster = (/ 1, 1, 1, 1, 1, 1, 1, 1 /)
------^
[ 75%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_driver_module.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/SILHS/latin_hypercube_driver_module.F90(2018): remark #7712: This variable has not been used. [K]
integer :: sample, ivar, k
-----------------------------^
[ 75%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_api_module.F90.o
[ 75%] Linking Fortran static library libsilhs_lib.a
[ 75%] Built target silhs_lib
Scanning dependencies of target radiation_lib
Scanning dependencies of target numerical_recipes_lib
[ 75%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/extended_atmosphere_module.F90.o
[ 75%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/parameters_radiation.F90.o
[ 75%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/cos_solar_zen_module.F90.o
[ 75%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/enhanced_simann.F90.o
[ 75%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/quicksort.F90.o
[ 76%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrtype.f90.o
[ 77%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/rad_lwsw_module.F90.o
[ 77%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nr.f90.o
[ 77%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrutil.f90.o
[ 77%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/bugsrad_driver.F90.o
[ 77%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/simple_rad_module.F90.o
[ 78%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/radiation_module.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Radiation/radiation_module.F90(519): remark #7712: This variable has not been used. [STATS]
lh_sample_point_weights, hydromet, stats, icol, &
--------------------------------------------------^
[ 78%] Linking Fortran static library libradiation_lib.a
[ 78%] Built target radiation_lib
Scanning dependencies of target input_fields_lib
[ 78%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/extrapolation.F90.o
[ 78%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/hydrostatic_module.F90.o
[ 78%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_names.F90.o
[ 78%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/stat_file_module.F90.o
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_grads.F90.o
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_netcdf.F90.o
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_reader.F90.o
[ 80%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/stat_file_utils.F90.o
[ 80%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/corr_varnce_input_reader.F90.o
[ 80%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_interpret.F90.o
[ 81%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_fields.F90.o
[ 81%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/sounding.F90.o
[ 82%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amoeba.f90.o
[ 82%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amebsa.f90.o
[ 82%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran_state.f90.o
[ 82%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_v.f90.o
[ 82%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_s.f90.o
[ 82%] Linking Fortran static library libnumerical_recipes_lib.a
[ 82%] Built target numerical_recipes_lib
[ 82%] Linking Fortran static library libinput_fields_lib.a
[ 82%] Built target input_fields_lib
Scanning dependencies of target benchmark_cases_lib
Scanning dependencies of target G_unit_test_lib
Scanning dependencies of target microphys_lib
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/KK_integrals_tests.F90.o
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Nc_Ncn_test.F90.o
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/corr_cholesky_mtx_tests.F90.o
[ 83%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/parameters_microphys.F90.o
[ 83%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/mu_sigma_hm_tests.F90.o
[ 83%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/hole_filling_tests.F90.o
[ 83%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/fill_holes_tests.F90.o
[ 84%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/diag_ustar_module.F90.o
[ 84%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/cloud_sed_module.F90.o
[ 84%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/time_dependent_input.F90.o
[ 84%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/silhs_category_variance_module.F90.o
[ 84%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/gfdl_activation.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/silhs_category_variance_module.F90(18): remark #7712: This variable has not been used. [MICROPHYS_STATS_VARS_ALL]
X_mixt_comp_all_levs, microphys_stats_vars_all, &
-------------------------------------^
[ 84%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/ice_dfsn_module.F90.o
[ 85%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/read_corr_mtx_test.F90.o
[ 85%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/rev_direction_grid_test.F90.o
[ 86%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/spec_hum_to_mixing_ratio.F90.o
[ 86%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/silhs_category_test.F90.o
[ 86%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/mixed_moment_PDF_integrals.F90.o
[ 86%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_heaviside_tests.F90.o
[ 87%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_min_max_tests.F90.o
[ 87%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/wangara.F90.o
[ 87%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90.o
[ 88%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/tuner_tests.F90.o
[ 88%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/w_up_in_cloud_tests.F90.o
[ 89%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/morrison_microphys_module.F90.o
[ 89%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_init_cleanup.F90.o
[ 90%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/advance_microphys_module.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/morrison_microphys_module.F90(20): remark #7712: This variable has not been used. [SATURATION_FORMULA]
saturation_formula, &
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/morrison_microphys_module.F90(21): remark #7712: This variable has not been used. [STATS]
stats, icol, &
---------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/morrison_microphys_module.F90(21): remark #7712: This variable has not been used. [ICOL]
stats, icol, &
----------------------^
[ 90%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/coamps_microphys_driver_module.F90.o
[ 91%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/pdf_hydromet_microphys_wrapper.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/advance_microphys_module.F90(588): remark #7712: This variable has not been used. [L_UPWIND_DIFF_SED]
l_upwind_diff_sed
--------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/advance_microphys_module.F90(728): remark #7712: This variable has not been used. [NAME_KHM]
name_hmp2, name_wp, name_khm
--------------------------^
[ 91%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/pdf_parameter_tests.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/sfc_flux.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/bomex.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_nov02.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_oct14.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/jun25.F90.o
[ 93%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_a.F90.o
[ 93%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/nov11.F90.o
[ 93%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cloud_feedback.F90.o
[ 93%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cobra.F90.o
[ 93%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf01.F90.o
[ 93%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/KK_microphys_module.F90.o
[ 93%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf02.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/KK_microphys_module.F90(43): remark #7712: This variable has not been used. [GR]
subroutine KK_local_microphys( gr, dt, nzt, & ! In
---------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Microphys/KK_microphys_module.F90(50): remark #7712: This variable has not been used. [ICOL]
stats, icol, & ! In
----------------------------------------^
[ 94%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/ekman.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/ekman.F90(20): remark #7712: This variable has not been used. [Z]
subroutine ekman_sfclyr( ngrdcol, z, &
------------------------------------^
[ 94%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/fire.F90.o
[ 94%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls2.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3_night.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/lba.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_b.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/neutral_case.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/rico.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/twp_ice.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_0003.F90.o
[ 95%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_3year.F90.o
[ 96%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_97.F90.o
[ 96%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/astex_a209.F90.o
[ 96%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex.F90.o
[ 96%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex_long.F90.o
[ 96%] Linking Fortran static library libG_unit_test_lib.a
[ 96%] Built target G_unit_test_lib
Scanning dependencies of target G_unit_tests
[ 96%] Building Fortran object src/CMakeFiles/G_unit_tests.dir/G_unit_tests.F90.o
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/estimate_scm_microphys_module.F90.o
[ 96%] Linking Fortran executable G_unit_tests
[ 96%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/prescribe_forcings.F90.o
[ 96%] Built target G_unit_tests
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/lh_microphys_driver_module.F90.o
[ 96%] Linking Fortran static library libbenchmark_cases_lib.a
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_driver.F90.o
[ 96%] Built target benchmark_cases_lib
[ 96%] Linking Fortran static library libmicrophys_lib.a
[ 96%] Built target microphys_lib
Scanning dependencies of target clubb_driver_lib
[ 96%] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/generalized_grid_test.F90.o
[ 96%] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/soil_vegetation.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/generalized_grid_test.F90(698): remark #7712: This variable has not been used. [HM_IDX]
i, sclr, edsclr, hm_idx
-----------------------^
[ 97%] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/clubb_driver.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver.F90(2637): remark #7712: This variable has not been used. [ERR_INFO]
subroutine set_case_initial_conditions(err_info)
-----------------------------------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver.F90(4515): remark #7712: This variable has not been used. [GRID_ADAPT_IN_TIME_METHOD]
grid_adapt_in_time_method, &
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver.F90(4514): remark #7712: This variable has not been used. [L_ADD_DYCORE_GRID]
l_add_dycore_grid, &
----------------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver.F90(3122): remark #7712: This variable has not been used. [L_STATS_LAST]
l_stats_last
------^
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver.F90(3142): remark #7712: This variable has not been used. [RET_CODE]
ret_code, &
------^
[ 97%] Linking Fortran static library libclubb_driver_lib.a
[ 97%] Built target clubb_driver_lib
Scanning dependencies of target clubb_driver_test
Scanning dependencies of target clubb_standalone
Scanning dependencies of target clubb_thread_test
Scanning dependencies of target clubb_tuner
[ 97%] Building Fortran object src/CMakeFiles/clubb_driver_test.dir/clubb_driver_test.F90.o
[ 98%] Building Fortran object src/CMakeFiles/clubb_standalone.dir/clubb_standalone.F90.o
[ 98%] Building Fortran object src/CMakeFiles/clubb_thread_test.dir/clubb_thread_test.F90.o
[ 99%] Building Fortran object src/CMakeFiles/clubb_tuner.dir/error.F90.o
[ 99%] Linking Fortran executable clubb_standalone
[ 99%] Linking Fortran executable clubb_thread_test
[100%] Linking Fortran executable clubb_driver_test
[100%] Built target clubb_thread_test
[100%] Built target clubb_standalone
[100%] Built target clubb_driver_test
[100%] Building Fortran object src/CMakeFiles/clubb_tuner.dir/clubb_tuner.F90.o
/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_tuner.F90(86): warning #8889: Explicit interface or EXTERNAL declaration is required. [PARAM_LOOPS_DRIVER]
call param_loops_driver( )
---------------^
[100%] Linking Fortran executable clubb_tuner
[100%] Built target clubb_tuner
Install the project...
-- Install configuration: "Release"
-- Installing: /home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/libclubb_driver_lib.a
-- Installing: /home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_tuner
-- Set runtime path of "/home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_tuner" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g/lib"
-- Installing: /home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/G_unit_tests
-- Set runtime path of "/home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/G_unit_tests" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g/lib"
-- Installing: /home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_thread_test
-- Set runtime path of "/home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_thread_test" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g/lib"
-- Installing: /home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_standalone
-- Set runtime path of "/home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_standalone" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g/lib"
-- Installing: /home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_driver_test
-- Set runtime path of "/home/jenkins/workspace/clubb_plot_solver_compare_branch/install/ifx_PRECdouble/clubb_driver_test" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-vnle5nytdsohpf3fkn6waiuu5mcv5t6g/lib"
check_for_missing_threadprivate.py has begun.
File /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/sponge_layer_damping.F90 failed:
Missing threadprivate for:
uv_sponge_damp_profile
wp2_sponge_damp_settings
wp3_sponge_damp_profile
thlm_sponge_damp_profile
thlm_sponge_damp_settings
rtm_sponge_damp_settings
wp3_sponge_damp_settings
rtm_sponge_damp_profile
up2_vp2_sponge_damp_profile
up2_vp2_sponge_damp_settings
uv_sponge_damp_settings
wp2_sponge_damp_profile
File /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/fill_holes.F90 failed:
Missing threadprivate for:
ret_code
File /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/error_code.F90 failed:
Missing threadprivate for:
clubb_debug_level
File /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/corr_varnce_module.F90 failed:
Missing threadprivate for:
corr_array_n_below_def
corr_array_n_cloud_def
[91mcheck_for_missing_threadprivate.py did not pass.[0m
[91mfailedFiles = ['/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/sponge_layer_damping.F90', '/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/fill_holes.F90', '/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/error_code.F90', '/home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/corr_varnce_module.F90'][0m
[91m===============================================================
[91mTHREADPRIVATE CHECK FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_plot_solver_compare_branch/build/ifx_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
CLUBBStandardsCheck.py has begun.
--------------------- Default Private Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/generalized_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 3: module generalized_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/generalized_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 903 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1070 : 101 chars : rtm_ref_flip, thlm_ref_flip, um_ref_flip, vm_ref_flip, ug_flip, vg_flip, & ! Intent(in)
line 1083 : 111 chars : um_flip, vm_flip, upwp_flip, vpwp_flip, up2_flip, vp2_flip, up3_flip, vp3_flip, & ! Intent(inout)
line 1085 : 111 chars : wp2_flip, wp3_flip, rtp2_flip, rtp3_flip, thlp2_flip, thlp3_flip, rtpthlp_flip, & ! Intent(inout)
line 1091 : 109 chars : wp2rtp_flip, wp2thlp_flip, uprcp_flip, vprcp_flip, rc_coef_zm_flip, wp4_flip, & ! intent(inout)
line 1092 : 105 chars : wpup2_flip, wpvp2_flip, wp2up2_flip, wp2vp2_flip, ice_supersat_frac_flip, & ! intent(inout)
line 1581 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1608 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2up_implicit, nzt, ngrdcol, &
line 1612 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2up_explicit, nzt, ngrdcol, &
line 1616 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2vp_implicit, nzt, ngrdcol, &
line 1620 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2vp_explicit, nzt, ngrdcol, &
line 1654 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpup2_implicit, nzt, ngrdcol, &
line 1658 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpup2_explicit, nzt, ngrdcol, &
line 1662 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpvp2_implicit, nzt, ngrdcol, &
line 1666 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpvp2_explicit, nzt, ngrdcol, &
line 2470 : 105 chars : tolerance = max( 1.e-8_core_rknd, epsilon(tolerance) ) ! max statement for single precision runs
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver.F90 ---------------------
WARNING: 'use' statements without 'only' found in the following lines:
WARNING: Check that comma is on same line as 'use', as CLUBB requires.
3103 : use gptl
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 200 : 110 chars : l_modify_ic_with_cubic_int, & ! Flag for interpolating the sounding profile with Steffen's monotone cubic
line 201 : 110 chars : ! method to obtain smoother initial condition profile, which is found to be
line 202 : 111 chars : ! beneficial to achive a better numerical solution convergence. If this flag
line 203 : 118 chars : ! is turned off, the initial conditions will be generated with linear interpolation.
line 204 : 111 chars : ! This is done on a case-by-case basis, since using the monotone cubic method
line 205 : 109 chars : ! requires a special sounding.in file with many additional sounding levels.
line 206 : 109 chars : l_modify_bc_for_cnvg_test, & ! Flag to activate modifications on boundary condition for convergence test
line 738 : 101 chars : !$omp sens_ht, latent_ht, lmin, vert_decorr_coef, deep_soil_T_in_K, sfc_soil_T_in_K, veg_T_in_K, &
line 745 : 101 chars : !$omp exner, rtm, thlm, rcm, wp3, wp3_zm, delta_zm, p_in_Pa, cloud_frac, wpthvp, wp2thvp, wp2up, &
line 754 : 102 chars : !$omp rtp2_mc, thlp2_mc, rtpthlp_mc, Ncm_mc, Ncm, Nccnm, em, tau_zm, tau_zt, Kh_zt, Kh_zm, rfrzm, &
line 755 : 105 chars : !$omp rrm, Nrm, Nc_in_cloud, wpNcp, radht, Frad, Frad_SW_up, Frad_LW_up, Frad_SW_down, Frad_LW_down, &
line 756 : 102 chars : !$omp wpsclrp_sfc, wpedsclrp_sfc, sclrm, wpsclrp, sclrp2, sclrp3, sclrprtp, sclrpthlp, sclrpthvp, &
line 1016 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 1745 : 102 chars : open(unit=iunit_grid_adaptation, file=fname_grid_adaptation, status='replace', action='write')
line 2060 : 105 chars : allocate( um_ref(ngrdcol, gr%nzt) ) ! Reference u wind for nudging; Michael Falk, 17 Oct 2007
line 2061 : 105 chars : allocate( vm_ref(ngrdcol, gr%nzt) ) ! Reference v wind for nudging; Michael Falk, 17 Oct 2007
line 2498 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 2529 : 106 chars : ! Similar call to above, checking parameter values, but because we've placed this in "init_clubb_case"
line 2537 : 116 chars : write(fstderr, *) "Fatal error calling check_clubb_settings_api and/or check_parameters_api in clubb_driver"
line 2580 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 2592 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 2593 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 2596 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 2598 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 2604 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 2605 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 2606 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 2607 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 2608 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 2609 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 2610 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 2611 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 2612 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 2613 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 2722 : 103 chars : invrs_rho_ds_zt(i,k) = invrs_rho_ds_zt_init(k) ! inv. dry, static density: t-levs
line 2728 : 103 chars : um_pert(i,k) = zero ! Variables used to track perturbed version of winds.
line 2730 : 105 chars : wm_zt(i,k) = wm_zt_init(k) ! Imposed large scale w - Thermodynamic levels
line 2924 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 3115 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 3270 : 103 chars : um(i,:), vm(i,:), rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), &
line 3603 : 111 chars : !$acc X_nl_all_levs, X_mixt_comp_all_levs, lh_sample_point_weights, mu_x_1_n, mu_x_2_n, &
line 3605 : 104 chars : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped, &
line 3609 : 116 chars : !$acc pdf_params%cloud_frac_1, pdf_params%cloud_frac_2, pdf_params%cthl_1, pdf_params%cthl_2, &
line 3610 : 112 chars : !$acc pdf_params%crt_1, pdf_params%crt_2, pdf_params%stdev_chi_1, pdf_params%stdev_chi_2, &
line 3626 : 102 chars : wp2_zt = zm2zt_api( gr%nzm, gr%nzt, ngrdcol, gr, wp2, w_tol_sqd ) ! Positive definite quantity
line 3632 : 109 chars : thlm(i,:), p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), rtm(i,:), &! In
line 3633 : 109 chars : rcm(i,:), cloud_frac(i,:), wm_zt(i,:), wm_zm(i,:), wp2_zt(i,:), & ! In
line 3634 : 106 chars : hydromet(i,:,:), Nc_in_cloud(i,:), & ! In
line 3651 : 102 chars : Nccnm(i,:), & ! Inout
line 3652 : 117 chars : hydromet_mc(i,:,:), Ncm_mc(i,:), rcm_mc(i,:), rvm_mc(i,:), & ! Out
line 3653 : 107 chars : thlm_mc(i,:), hydromet_vel_zt(i,:,:), & ! Out
line 3654 : 102 chars : hydromet_vel_covar_zt_impc(i,:,:), & ! Out
line 3655 : 102 chars : hydromet_vel_covar_zt_expc(i,:,:), & ! Out
line 3656 : 110 chars : wprtp_mc(i,:), wpthlp_mc(i,:), rtp2_mc(i,:), & ! Out
line 3657 : 105 chars : thlp2_mc(i,:), rtpthlp_mc(i,:) ) ! Out
line 3681 : 103 chars : stats, i, & ! Inout
line 3682 : 103 chars : hydromet(i,:,:), hydromet_vel_zt(i,:,:), hydrometp2(i,:,:), & ! Inout
line 3683 : 103 chars : K_hm(i,:,:), Ncm(i,:), Nc_in_cloud(i,:), rvm_mc(i,:), & ! Inout
line 3684 : 103 chars : thlm_mc(i,:), err_info, & ! Inout
line 3685 : 101 chars : wphydrometp(i,:,:), wpNcp(i,:) ) ! Out
line 3694 : 106 chars : !$acc update device( rcm_mc, rvm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3747 : 104 chars : !$acc update host( rvm_mc, rcm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3772 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, X_nl_all_levs, &
line 3798 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, thlm, rtm, rcm )
line 3899 : 112 chars : call stats_update( "brunt_term_time_avg", richardson_num_term_weight*richardson_num_term_time_avg, &
line 3925 : 101 chars : .and. stats%l_last_sample ) then ! only adapt grid when the average of the last
line 4053 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_scheme = ', time_microphys_scheme
line 4054 : 104 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_advance = ', time_microphys_advance
line 4173 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 4185 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 4186 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 4189 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 4191 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 4197 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 4198 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 4199 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 4200 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 4201 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 4202 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 4203 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 4204 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 4205 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 4206 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 4228 : 119 chars : if ( thlm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( thlm_sponge_damp_profile )
line 4229 : 118 chars : if ( rtm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( rtm_sponge_damp_profile )
line 4230 : 117 chars : if ( uv_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( uv_sponge_damp_profile )
line 4231 : 118 chars : if ( wp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp2_sponge_damp_profile )
line 4232 : 118 chars : if ( wp3_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp3_sponge_damp_profile )
line 4233 : 122 chars : if ( up2_vp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( up2_vp2_sponge_damp_profile )
line 4920 : 104 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 4928 : 106 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 4942 : 101 chars : 'be used for cases with forcings from an input file and for the atex ', &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_tuner.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 654 : 102 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/clubb_driver_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 70 : 107 chars : write(fstderr, *) "This section ensures that everything allocated in init_clubb_case will be deallocated"
line 71 : 102 chars : write(fstderr, *) "in clean_up_clubb. This may cause a runtime error if there is a mismatch between"
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/grid_adaptation_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 128 chars : write(fstderr, *) "The fixed minimum grid density momentum heights need to cover at least the domain of the physics grid."
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/sfc_varnce_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 722 : 105 chars : call sfc_varnce_check( sclr_dim, wp2(i,gr%k_lb_zm), up2(i,gr%k_lb_zm), & ! intent(in)
line 723 : 105 chars : vp2(i,gr%k_lb_zm), thlp2(i,gr%k_lb_zm), rtp2(i,gr%k_lb_zm), & ! intent(in)
line 724 : 105 chars : rtpthlp(i,gr%k_lb_zm), sclrp2(i,gr%k_lb_zm,:), & ! intent(in)
line 725 : 105 chars : sclrprtp(i,gr%k_lb_zm,:), sclrpthlp(i,gr%k_lb_zm,:), & ! intent(in)
line 726 : 108 chars : err_info ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/mono_flux_limiter.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 698 : 104 chars : !$acc parallel loop gang vector collapse(2) default(present) reduction(.or.:l_any_adjustment_needed)
line 849 : 121 chars : ! MONOFLUX TEST COMMENT DO NOT REMOVE if( any(wpxp_net_adjust /= 0.0) ) write(fstderr,*) "MONOFLUX: wpxp adjusted "
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/advance_windm_edsclrm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 492 : 102 chars : stats ) ! intent(inout)
line 500 : 102 chars : stats ) ! intent(inout)
line 952 : 103 chars : call windm_edsclrm_rhs( nzm, nzt, ngrdcol, gr, windm_edsclrm_scalar, dt, & ! intent(in)
line 953 : 103 chars : lhs_diff, edsclrm(:,:,edsclr), & ! intent(in)
line 954 : 103 chars : edsclrm_forcing(:,:,edsclr), & ! intent(in)
line 955 : 103 chars : rho_ds_zm, invrs_rho_ds_zt, & ! intent(in)
line 956 : 103 chars : l_imp_sfc_momentum_flux, wpedsclrp(:,gr%k_lb_zm,edsclr), & ! intent(in)
line 957 : 106 chars : stats, & ! intent(inout)
line 958 : 104 chars : rhs(:,:,edsclr) ) ! intent(out)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/parameters_tunable.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 839 : 106 chars : / sqrt( 4.0_core_rknd * ( 1.0_core_rknd - 0.4_core_rknd )**3 &
line 840 : 118 chars : + clubb_params(ngrdcol,iSkw_max_mag)**2 ) ) ) ! Known magic number
line 902 : 117 chars : mult_factor_zt(i) = 1.0_core_rknd + clubb_params(i,imult_coef) * log( avg_deltaz(i) / grid_spacing_thresh )
line 917 : 104 chars : nu_vert_res_dep%nu10(i) = clubb_params(i,inu10) * mult_factor_zt(i) !We're unsure of the grid
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/stats_netcdf.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 217: subroutine stats_init_api( registry_path, output_path, ncol, stats_tsamp, stats_tout, dt_main, &
line 400: subroutine stats_finalize_api( stats, err_info )
line 467: subroutine stats_open_netcdf( output_path, ncol, defs, ndefs, time_units, &
line 765: subroutine stats_begin_timestep_api( itime, stats )
line 801: subroutine stats_end_timestep_api( time_value, stats, err_info )
line 851: subroutine stats_update_scalar( name, values, stats, icol, level )
line 910: subroutine stats_update_1d( name, values, stats, icol, level )
line 969: subroutine stats_update_2d( name, values, stats, icol, level )
line 1031: subroutine stats_begin_budget_scalar( name, values, stats, icol )
line 1076: subroutine stats_begin_budget_1d( name, values, stats, icol )
line 1128: subroutine stats_begin_budget_2d( name, values, stats, icol )
line 1172: subroutine stats_update_budget_scalar( name, values, stats, icol, level )
line 1221: subroutine stats_update_budget_1d( name, values, stats, icol, level )
line 1270: subroutine stats_update_budget_2d( name, values, stats, icol, level )
line 1313: subroutine stats_finalize_budget_scalar( name, values, stats, icol, l_count_sample )
line 1377: subroutine stats_finalize_budget_1d( name, values, stats, icol, l_count_sample )
line 1448: subroutine stats_finalize_budget_2d( name, values, stats, icol, l_count_sample )
line 1512: subroutine stats_write( time_value, stats, ierr )
line 1633: subroutine stats_grid_init( ncol, zt_src, zm_src, zt_tgt, zm_tgt, &
line 1694: subroutine stats_update_grid( zt_src, zm_src, rho_vals, rho_levels, p_sfc, stats )
line 1771: subroutine stats_lh_samples_init( num_samples, nzt, nl_var_names, u_var_names, zt_vals, &
line 1885: subroutine stats_lh_samples_write_lognormal( samples, stats, err_info )
line 1933: subroutine stats_lh_samples_write_uniform( uniform_vals, mixture_comp, sample_weights, &
line 2141: subroutine stats_lookup_append( stats, id )
line 2172: subroutine stats_lookup_reject_append( stats, name )
line 2275: subroutine stats_read_registry_namelist( path, defs, ndefs, ierr )
line 2341: subroutine stats_expand_registry( sclr_dim, edsclr_dim, defs, ndefs, hydromet_list )
line 2631: subroutine add_expanded_def( base_def, name, out_defs, nout )
line 2672: subroutine parse_registry_line( line, def, l_valid )
line 2734: subroutine split_registry_fields( line, fields, nfields )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/stats_netcdf.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 132 : 105 chars : real(kind=stat_rknd), allocatable, dimension(:,:) :: buffer ! (col, height); height=1 for rank-1 vars
line 177 : 103 chars : logical :: l_last_sample = .false. ! True if we want to output at the end of this sample
line 178 : 104 chars : logical :: l_different_output_grid = .false. ! True if we need to remap the variables before output
line 179 : 102 chars : logical :: l_output_rad_files = .false. ! True if we want to output radiation grid variables
line 433 : 101 chars : if ( allocated( stats%grid%rho_lin_spline_vals ) ) deallocate( stats%grid%rho_lin_spline_vals )
line 434 : 105 chars : if ( allocated( stats%grid%rho_lin_spline_levels ) ) deallocate( stats%grid%rho_lin_spline_levels )
line 579 : 104 chars : ret_code = nf90_def_var( stats%ncid, "time", NF90_DOUBLE, (/ stats%time_dimid /), stats%time_varid )
line 584 : 101 chars : ret_code = nf90_def_var( stats%ncid, "col", NF90_DOUBLE, (/ stats%col_dimid /), stats%col_varid )
line 604 : 121 chars : ret_code = nf90_def_var( stats%ncid, "lh_zt", NF90_DOUBLE, (/ stats%lh_2d%lh_zt_dimid /), stats%lh_2d%lh_zt_varid )
line 611 : 112 chars : ret_code = nf90_def_var( stats%ncid, "rad_zt", NF90_DOUBLE, (/ stats%rad_zt_dimid /), stats%rad_zt_varid )
line 615 : 112 chars : ret_code = nf90_def_var( stats%ncid, "rad_zm", NF90_DOUBLE, (/ stats%rad_zm_dimid /), stats%rad_zm_varid )
line 622 : 109 chars : ret_code = nf90_def_var( stats%ncid, "param", NF90_DOUBLE, (/ stats%param_dimid /), stats%param_varid )
line 630 : 101 chars : (/ stats%param_strlen_dimid, stats%param_dimid /), stats%param_name_varid )
line 720 : 110 chars : ret_code = nf90_put_att( stats%ncid, stats%vars(i)%varid, "long_name", trim( stats%vars(i)%long_name ) )
line 721 : 102 chars : ret_code = nf90_put_att( stats%ncid, stats%vars(i)%varid, "units", trim( stats%vars(i)%units ) )
line 734 : 108 chars : ret_code = nf90_put_var( stats%ncid, stats%col_varid, [( real( i, kind=core_rknd ), i=1, stats%ncol )] )
line 754 : 109 chars : ret_code = nf90_put_var( stats%ncid, stats%param_varid, [( real( i, kind=core_rknd ), i=1, nparams )] )
line 1592 : 101 chars : stats%grid%gr_source, stats%grid%gr_target, stats%vars(i)%size, &
line 1593 : 107 chars : real( stats%vars(i)%buffer, kind=core_rknd ), stats%vars(i)%out_size, &
line 1594 : 112 chars : size( stats%grid%rho_lin_spline_vals, 2 ), stats%grid%rho_lin_spline_vals, &
line 1749 : 101 chars : if ( allocated( stats%grid%rho_lin_spline_vals ) ) deallocate( stats%grid%rho_lin_spline_vals )
line 1750 : 105 chars : if ( allocated( stats%grid%rho_lin_spline_levels ) ) deallocate( stats%grid%rho_lin_spline_levels )
line 2164 : 116 chars : if ( stats%lookup%cache_len > 0 ) tmp(1:stats%lookup%cache_len) = stats%lookup%cache(1:stats%lookup%cache_len)
line 2198 : 105 chars : tmp(1:stats%lookup%reject_cache_len) = stats%lookup%reject_cache(1:stats%lookup%reject_cache_len)
line 2264 : 101 chars : write(date(32:33),'(i2.2)') nint( ( ( real( mod( nint( st_time ),3600 ),kind=time_precision ) / &
line 2332 : 104 chars : write( fstderr,* ) "Invalid stats_registry entry (expected: name | grid | long_name [| units]):"
line 2422 : 101 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2423 : 101 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2430 : 101 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2431 : 101 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2438 : 101 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2439 : 101 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2446 : 113 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_1", &
line 2450 : 113 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_2", &
line 2456 : 101 chars : call add_expanded_def(base_def,"corr_w_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2457 : 101 chars : call add_expanded_def(base_def,"corr_w_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2464 : 103 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2465 : 103 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2472 : 103 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2473 : 103 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2480 : 103 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2481 : 103 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2488 : 115 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_1_n", &
line 2492 : 115 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_2_n", &
line 2529 : 112 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"p", &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/penta_bicgstab_solver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 419 : 110 chars : ! It's interesting to see how close E_inv is to the lhs diagonal, it's usually (visually) very close, but
line 420 : 104 chars : ! using it instead of E_inv requires so many more iterations (use it would be jacobi preconditioner)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/advance_xp2_xpyp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1310 : 101 chars : sclrprtp(:,:,sclr) ) ! Intent(inout)
line 1343 : 102 chars : sclrpthlp(:,:,sclr) ) ! Intent(inout)
line 3011 : 101 chars : stats_tmp(i,k) = (-gamma_over_implicit_ts * lhs_ta(2+gr%grid_dir_indx,i,k)) * xapxbp(i,km1) &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/pdf_parameter_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 101 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 298 : 102 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 300 : 101 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/model_flags.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 315 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 541 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 845 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/clubb_api_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2422 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
line 2489 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/fill_holes.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 234 : 113 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 240 : 105 chars : write(fstderr, *) "column", i, " field average = ", sum(field(i,:) * rho_ds(i,:) * dz(i,:)) &
line 584 : 102 chars : ! rho_ds_dz(i,k-num_hf_draw_points:k+num_hf_draw_points))
line 823 : 110 chars : * min( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 828 : 106 chars : + mass_fraction * ( min( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
line 833 : 110 chars : * max( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 840 : 108 chars : + mass_fraction * ( max( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/advance_clubb_core_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1868 : 101 chars : stats, & ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/advance_xm_wpxp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 777 : 101 chars : call wpxp_term_pr1_lhs( nzm, ngrdcol, gr, C6rt_Skw_fnc, C6thl_Skw_fnc, C7_Skw_fnc, & ! Intent(in)
line 778 : 101 chars : invrs_tau_C6_zm, l_scalar_calc, & ! Intent(in)
line 779 : 102 chars : lhs_pr1_wprtp, lhs_pr1_wpthlp, lhs_pr1_wpsclrp ) ! Intent(out)
line 852 : 102 chars : stats, & ! InOut
line 853 : 101 chars : rtm, wprtp, thlm, wpthlp, sclrm, wpsclrp, & ! InOut
line 854 : 101 chars : err_info ) ! InOut
line 894 : 101 chars : stats, & ! InOut
line 4833 : 108 chars : tmp_zm_stats(i,k) = (-gamma_over_implicit_ts*lhs_ta_wpxp(2+gr%grid_dir_indx,i,k)) * wpxp(i,km1) &
line 4835 : 105 chars : + (-gamma_over_implicit_ts*lhs_ta_wpxp(2-gr%grid_dir_indx,i,k)) * wpxp(i,kp1)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/advance_wp2_wp3_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 925 : 101 chars : stats, & ! intent(inout)
line 1712 : 105 chars : stats_tmp_zt(i,k) = - gamma_over_implicit_ts * wp3_term_ta_lhs_result(5,i,k) * wp3(i,k-1) &
line 1713 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(4,i,k) * wp2(i,k) &
line 1714 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(3,i,k) * wp3(i,k) &
line 1715 : 105 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(2,i,k) * wp2(i,k+1) &
line 1716 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(1,i,k) * wp3(i,k+1)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/stats_clubb_utilities.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 129 : 101 chars : wp2_zt, thlp2_zt, wpthlp_zt, wprtp_zt, rtp2_zt, rtpthlp_zt, up2_zt, vp2_zt, upwp_zt, vpwp_zt, &
line 130 : 101 chars : wpup2, wpvp2, a3_coef_zt, wp3_on_wp2_zt, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 4: module err_info_type_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 265 : 102 chars : write(err_info%err_header_global,'(A38, I3, A15, I3, A, A28, A33, F6.2, A1, F6.2, A, A39, A40)') &
line 276 : 105 chars : write(err_info%err_header(i),'(A38, I3, A15, I3, A, A22, I2, A11, F6.2, A13, F6.2, A, A39, A40)') &
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 19 check(s) failed.
CLUBBStandardsCheck.py has begun.
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/SILHS/mt95.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 362: subroutine init_by_type( put, get )
line 382: subroutine init_by_scalar( put )
line 413: subroutine init_by_array( put )
line 461: subroutine next_state( )
line 593: subroutine genrand_int32_0d( y )
line 614: subroutine genrand_int32_1d( y )
line 629: subroutine genrand_int32_2d( y )
line 644: subroutine genrand_int32_3d( y )
line 659: subroutine genrand_int32_4d( y )
line 674: subroutine genrand_int32_5d( y )
line 689: subroutine genrand_int32_6d( y )
line 704: subroutine genrand_int32_7d( y )
line 720: subroutine genrand_int31_0d( y )
line 732: subroutine genrand_int31_1d( y )
line 747: subroutine genrand_int31_2d( y )
line 762: subroutine genrand_int31_3d( y )
line 777: subroutine genrand_int31_4d( y )
line 792: subroutine genrand_int31_5d( y )
line 807: subroutine genrand_int31_6d( y )
line 822: subroutine genrand_int31_7d( y )
line 838: subroutine genrand_real1_0d( r )
line 853: subroutine genrand_real1_1d( r )
line 868: subroutine genrand_real1_2d( r )
line 883: subroutine genrand_real1_3d( r )
line 898: subroutine genrand_real1_4d( r )
line 913: subroutine genrand_real1_5d( r )
line 928: subroutine genrand_real1_6d( r )
line 943: subroutine genrand_real1_7d( r )
line 959: subroutine genrand_real2_0d( r )
line 974: subroutine genrand_real2_1d( r )
line 989: subroutine genrand_real2_2d( r )
line 1004: subroutine genrand_real2_3d( r )
line 1019: subroutine genrand_real2_4d( r )
line 1034: subroutine genrand_real2_5d( r )
line 1049: subroutine genrand_real2_6d( r )
line 1064: subroutine genrand_real2_7d( r )
line 1080: subroutine genrand_real3_0d( r )
line 1095: subroutine genrand_real3_1d( r )
line 1110: subroutine genrand_real3_2d( r )
line 1125: subroutine genrand_real3_3d( r )
line 1140: subroutine genrand_real3_4d( r )
line 1155: subroutine genrand_real3_5d( r )
line 1170: subroutine genrand_real3_6d( r )
line 1185: subroutine genrand_real3_7d( r )
line 1201: subroutine genrand_res53_0d( r )
line 1218: subroutine genrand_res53_1d( r )
line 1233: subroutine genrand_res53_2d( r )
line 1248: subroutine genrand_res53_3d( r )
line 1263: subroutine genrand_res53_4d( r )
line 1278: subroutine genrand_res53_5d( r )
line 1293: subroutine genrand_res53_6d( r )
line 1308: subroutine genrand_res53_7d( r )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/SILHS/latin_hypercube_driver_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 407 : 105 chars : !$acc update host(X_u_all_levs,l_in_precip,lh_sample_point_weights,X_mixt_comp_all_levs,k_lh_start)
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 2 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/dycoms2_rf02.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 121 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 122 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/gabls2.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 152 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 153 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/mpace_a.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 272 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 273 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/dycoms2_rf01.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 91 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 92 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module prescribe_forcings_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 297 : 104 chars : !$acc enter data create( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 471 : 118 chars : !$acc update device( wm_zt, wm_zm, thlm_forcing, rtm_forcing, um_ref, vm_ref, sclrm_forcing, edsclrm_forcing )
line 909 : 103 chars : !$acc exit data delete( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 1112 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1116 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1120 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1121 : 112 chars : exner_zm(i,km1), exner_zm(i,k00), exner_zm(i,kp1), exner_zm(i,kp2) )
line 1124 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1125 : 108 chars : thlm_zm(i,km1), thlm_zm(i,k00), thlm_zm(i,kp1), thlm_zm(i,kp2) )
line 1128 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1129 : 104 chars : rtm_zm(i,km1), rtm_zm(i,k00), rtm_zm(i,kp1), rtm_zm(i,kp2) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/rico.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 159 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 160 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/lba.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 96 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 97 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
line 176 : 101 chars : wpthlp_sfc(i) = convert_sens_ht_to_km_s( ( 270._core_rknd * ft**1.5_core_rknd ), rho_sfc(i) )
line 177 : 101 chars : wprtp_sfc(i) = convert_latent_ht_to_m_s( ( 554._core_rknd * ft**1.3_core_rknd ), rho_sfc(i) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/wangara.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 104 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 105 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/bomex.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 127 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 128 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/Benchmark_cases/mpace_b.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 157 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 158 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 11 check(s) failed.
No matches for /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/KK_microphys/
CLUBBStandardsCheck.py has begun.
--------------------- Default Private Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 19: module fill_holes_tests
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 162 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 180 : 110 chars : if ( l_print_name ) print *, "filling holes of: easy_fill_test_"//trim(fill_type_names(fill_type))
line 195 : 121 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 241 : 118 chars : if ( l_print_name ) print *, "filling holes of: reverse_easy_fill_test_"//trim(fill_type_names(fill_type))
line 344 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 363 : 113 chars : if ( l_print_name ) print *, "filling holes of: below_thresh_test_"//trim(fill_type_names(fill_type))
line 385 : 103 chars : print *, "-- error", two * abs( initial_mass - new_mass ) / ( initial_mass + new_mass )
line 419 : 121 chars : if ( l_print_name ) print *, "filling holes of: reverse_below_thresh_test_"//trim(fill_type_names(fill_type))
line 430 : 116 chars : print *, "ERROR in below_thresh_test REVERSE MODE: method was not conservative in grid reverse mode"
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/G_unit_test_types/spurious_source_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 500 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/G_unit_test_types/pdf_parameter_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 542 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module rev_direction_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_plot_solver_compare_branch/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 233 : 113 chars : !seed used = -1102123834 1480475276 -248259584 525496705 1614213535 -1267052688 6290033 -78466652
line 234 : 127 chars : !seed_output = (/ -1102123834, 1480475276, -248259584, 525496705, 1614213535, -1267052688, 6290033, -78466652 /)
line 750 : 101 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 754 : 104 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
line 795 : 101 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 801 : 104 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
[91m===============================================================
[91mCLUBBStandardsCheck FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_plot_solver_compare_branch/build/ifx_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
[93mBuild completed successfully, but some source code checks have failed.[0m
