Skipping 153 KB..
Full LogTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTest
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1285): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA7]
call eqa7(praut,qctemp,rbar2d,nctemp,praut1,praut2,pi
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1293): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA9]
call eqa9(pracw,qctemp,qrtemp,pterm4,sfrain,xa,rbar2d,nctemp
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1390): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQG]
call tgqg(fallg,qgtemp,sfgraup,pterm4,pcut,abar,bgrp,mkk)
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1392): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQS]
call tgqs(falls,qstemp,sfsnow,pterm4,pcut,aprpr,bsnow,mkk)
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1400): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA19]
call eqa19(pconv,qitemp,rbar2d,nitemp,tttemp,pcut,cimass
------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1408): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA10G]
if(lgrpl)call eqa10g(pwacs,qstemp,qctemp,rbar2d,tttemp
---------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1417): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA21]
call eqa21(psaci,qitemp,qstemp,sfsnow,termb
------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1425): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA5G]
if(lgrpl)call eqa5g(praci,qitemp,qrtemp,tttemp,iwx1,gm3,gm4
---------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1434): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA12G]
if(lgrpl)call eqa12g(pgaci,qitemp,qgtemp,tttemp,sfgraup,xa,iwx1
---------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1442): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA14G]
if(lgrpl)call eqa14g(pgacs,qstemp,qgtemp,tttemp,rbar2d
---------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1451): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA20G]
if(lgrpl)call eqa20g(pgshr,pgacr,pgacw,tttemp,rbar2d,tzero
---------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(1461): warning #8889: Explicit interface or EXTERNAL declaration is required. [NRMCOL]
call nrmcol(tttemp,qctemp,qitemp,qgtemp,qrtemp,qstemp,pconv,pgaci
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(2): remark #7712: This variable has not been used. [P3]
1 (cond,p3,qc3,qi3,qr3,qg3,qs3,qv3,th3,w3,pr3d
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(2): remark #7712: This variable has not been used. [W3]
1 (cond,p3,qc3,qi3,qr3,qg3,qs3,qv3,th3,w3,pr3d
---------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(3): remark #7712: This variable has not been used. [WTM]
2 ,qsatv3d,temp3d,qsati3d,th2t3d,wtm,exbm,rbm
---------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(3): remark #7712: This variable has not been used. [EXBM]
2 ,qsatv3d,temp3d,qsati3d,th2t3d,wtm,exbm,rbm
-------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(5): remark #7712: This variable has not been used. [TIMEA]
4 ,pcut,p00,r,rvap,sloper,slopes,slopeg,timea,lice
----------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(6): remark #7712: This variable has not been used. [NNE]
5 ,nne,kk,i1d,j1d,ary1d,i1dflg,n1d,maxpt1d,maxvr1d
---------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(9): remark #7712: This variable has not been used. [CPOR]
8 ,cbeta,cnzero,cimass,cpor,cw,difvap,erc,esi,eic
-----------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(9): remark #7712: This variable has not been used. [DIFVAP]
8 ,cbeta,cnzero,cimass,cpor,cw,difvap,erc,esi,eic
-------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(10): remark #7712: This variable has not been used. [MW]
9 ,eri,egc,esc,esr,egi,egr,egs,mw,pi,praut1,praut2
-------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBP3]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
---------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBOV2]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
---------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBOV2G]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
----------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PCOND3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
---------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PSMLTI3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PSACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PGACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
-------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PIACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
--------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PCHOMO3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
---------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PRAUT3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
-----------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PRACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
------------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PDEPI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
---------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PINT3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PGDEP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PCONV3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
-----------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PSACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PGACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
-------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PRACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
--------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PREVP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
---------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PSDEP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PMLTGE3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
---------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGMLT3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PSMLT3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGACRM3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGACWM3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
---------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PRACS3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-----------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGSHR3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PGACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
---------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PSACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PIACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
-----------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PRHOMO3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PGACS3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
--------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PMLTSE3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
---------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PWACS3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
-----------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(242): remark #7712: This variable has not been used. [IC]
integer ic
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(247): remark #7712: This variable has not been used. [IP]
integer ip
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(249): remark #7712: This variable has not been used. [JP]
integer jp
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(251): remark #7712: This variable has not been used. [M]
integer m
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(253): remark #7712: This variable has not been used. [N]
integer n
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(256): remark #7712: This variable has not been used. [NP]
integer np
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(257): remark #7712: This variable has not been used. [NPTS]
integer npts
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(331): remark #7712: This variable has not been used. [SAT]
real sat
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(348): remark #7712: This variable has not been used. [WGT]
real wgt (len)
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/COAMPS_microphys/adjtq.F(356): remark #7712: This variable has not been used. [TMP1]
real tmp1 (len)
----------------^
[781/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/time_dependent_input.F90.o
[782/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_oct14.F90.o
[783/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/jun25.F90.o
[784/925] Linking Fortran static library src/Microphys/COAMPS_microphys/libcoamps_lib.a
[785/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_nov02.F90.o
[786/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/nov11.F90.o
[787/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/AiryFunction.f90.o
[788/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/bomex.F90.o
[789/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/sfc_flux.F90.o
[790/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm.F90.o
[791/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/fire.F90.o
[792/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_97.F90.o
[793/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_0003.F90.o
[794/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3.F90.o
[795/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_3year.F90.o
[796/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/twp_ice.F90.o
[797/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cloud_feedback.F90.o
[798/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/neutral_case.F90.o
[799/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3_night.F90.o
[800/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/astex_a209.F90.o
[801/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf02.F90.o
[802/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf01.F90.o
[803/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/lba.F90.o
[804/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/rico.F90.o
[805/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls2.F90.o
[806/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cobra.F90.o
[807/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_b.F90.o
[808/925] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/gases_ckd.F90.o
[809/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_a.F90.o
[810/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex.F90.o
[811/925] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_lwr.F.o
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(295): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(303): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(323): warning #8889: Explicit interface or EXTERNAL declaration is required. [GASCON]
call gascon
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(334): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP1]
call comscp1
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(358): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP2]
call comscp2
-----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(384): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_LW]
call two_rt_lw
-----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(391): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_LW]
call two_rt_lw
-----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(22): remark #7712: This variable has not been used. [CLDAMT]
+, cirho , o3mix , ts , cldamt
---------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [CLDMAX]
+, cldmax , b1 , b2 , b3
-------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B1]
+, cldmax , b1 , b2 , b3
--------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B2]
+, cldmax , b1 , b2 , b3
----------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B3]
+, cldmax , b1 , b2 , b3
-------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_lwr.F(24): remark #7712: This variable has not been used. [B4]
+, b4 , umco2 , umch4 , umn2o
-----------------------------^
[812/925] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_swr.F.o
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(332): warning #8889: Explicit interface or EXTERNAL declaration is required. [RAYLE]
call rayle
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(341): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(349): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(369): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP1]
call comscp1
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(393): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP2]
call comscp2
-----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(402): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_SW]
call two_rt_sw
-----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(409): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_SW]
call two_rt_sw
-----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(26): remark #7712: This variable has not been used. [TS]
+, cirho , o3mix , ts , amu0
------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(28): remark #7712: This variable has not been used. [CLDAMT]
+, alndr , cldamt , cldmax , umco2
---------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(28): remark #7712: This variable has not been used. [CLDMAX]
+, alndr , cldamt , cldmax , umco2
--------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(29): remark #7712: This variable has not been used. [B1]
+, umch4 , umn2o , b1 , b2
------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(29): remark #7712: This variable has not been used. [B2]
+, umch4 , umn2o , b1 , b2
-----------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B3]
+, b3 , b4 , fdsw , fdswcl
---------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B4]
+, b3 , b4 , fdsw , fdswcl
-------------------------------------^
[813/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Parabolic.f90.o
[814/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_utilities.F90.o
[815/925] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_rad.F.o
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_rad.F(586): warning #8889: Explicit interface or EXTERNAL declaration is required. [BUGS_LWR]
call bugs_lwr
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_rad.F(709): warning #8889: Explicit interface or EXTERNAL declaration is required. [BUGS_SWR]
call bugs_swr
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Radiation/BUGSrad/bugs_rad.F(27): remark #7712: This variable has not been used. [QRIL]
+, qcwl , qcil , qril , o3l
-----------------------------------------------^
[816/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_means.F90.o
[817/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_covar.F90.o
[818/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_all_MM.F90.o
[819/925] Linking Fortran static library src/Radiation/BUGSrad/libbugsrad_lib.a
[820/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_means.F90.o
[821/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_variances.F90.o
[822/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_Nrm_tendencies.F90.o
[823/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_turbulent_sed.F90.o
[824/925] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_covariances.F90.o
[825/925] Linking Fortran static library src/Microphys/KK_microphys/libKK_microphys_lib.a
[826/925] Generating Fortran dyndep file src/SILHS/CMakeFiles/silhs_lib.dir/Fortran.dd
[827/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_arrays.F90.o
[828/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/parameters_silhs.F90.o
[829/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/est_kessler_microphys_module.F90.o
[830/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/transform_to_pdf_module.F90.o
[831/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/output_2D_samples_module.F90.o
[832/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/mt95.F90.o
[833/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/generate_uniform_sample_module.F90.o
[834/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/math_utilities.F90.o
[835/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/lh_microphys_var_covar_module.F90.o
[836/925] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/prescribe_forcings.F90.o
[837/925] Linking Fortran static library src/Benchmark_cases/libbenchmark_cases_lib.a
[838/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_importance_sample_module.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/SILHS/silhs_importance_sample_module.F90(901): warning #5462: Global name too long, shortened from: silhs_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER to: s_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER
num_categories_in_cluster = (/ 1, 1, 1, 1, 1, 1, 1, 1 /)
------^
[839/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_driver_module.F90.o
[840/925] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_api_module.F90.o
[841/925] Linking Fortran static library src/SILHS/libsilhs_lib.a
[842/925] Generating Fortran dyndep file src/Radiation/CMakeFiles/radiation_lib.dir/Fortran.dd
[843/925] Generating Fortran dyndep file src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/Fortran.dd
[844/925] Generating Fortran dyndep file src/Microphys/CMakeFiles/microphys_lib.dir/Fortran.dd
[845/925] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/parameters_radiation.F90.o
[846/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrtype.f90.o
[847/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/parameters_microphys.F90.o
[848/925] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/cos_solar_zen_module.F90.o
[849/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/quicksort.F90.o
[850/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/ice_dfsn_module.F90.o
[851/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nr.f90.o
[852/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/gfdl_activation.F90.o
[853/925] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/extended_atmosphere_module.F90.o
[854/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/silhs_category_variance_module.F90.o
[855/925] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/rad_lwsw_module.F90.o
[856/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/mixed_moment_PDF_integrals.F90.o
[857/925] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/simple_rad_module.F90.o
[858/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/enhanced_simann.F90.o
[859/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/pdf_hydromet_microphys_wrapper.F90.o
[860/925] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/bugsrad_driver.F90.o
[861/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/advance_microphys_module.F90.o
[862/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/coamps_microphys_driver_module.F90.o
[863/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/KK_microphys_module.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/KK_microphys_module.F90(43): remark #7712: This variable has not been used. [GR]
subroutine KK_local_microphys( gr, dt, nzt, & ! In
---------------------------------^
[864/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/estimate_scm_microphys_module.F90.o
[865/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/lh_microphys_driver_module.F90.o
[866/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrutil.f90.o
[867/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/module_mp_graupel.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(6326): remark #7712: This variable has not been used. [I]
INTEGER:: i, k, k_0
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(749): remark #7712: This variable has not been used. [ITIMESTEP]
SUBROUTINE MP_GRAUPEL(ITIMESTEP, &
----------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(750): remark #7712: This variable has not been used. [TKE]
TH, QV, QC, QR, QI, QS, QG, NI, NC, NS, NR, NG, TKE, NCTEND, &
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [RHO]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [HT]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-----------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IMS]
IMS,IME, JMS,JME, KMS,KME,&
------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IME]
IMS,IME, JMS,JME, KMS,KME,&
----------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JMS]
IMS,IME, JMS,JME, KMS,KME,&
---------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JME]
IMS,IME, JMS,JME, KMS,KME,&
-------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
----------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
---------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
-------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QGSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
----------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QRSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-----------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QNISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
---------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QCSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
------------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1231): remark #7712: This variable has not been used. [PCCN]
REAL, DIMENSION(KMS:KME) :: PCCN ! CHANGE Q DROPLET ACTIVATION
----------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1316): remark #7712: This variable has not been used. [COFFI]
REAL COFFI ! ICE AUTOCONVERSION PARAMETER
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1325): remark #7712: This variable has not been used. [RHO2]
REAL FALTNDR,FALTNDI,FALTNDNI,RHO2
------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(5435): remark #7712: This variable has not been used. [DUM]
REAL DUM
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1350): remark #7712: This variable has not been used. [DUMQSI]
REAL DUM,DUM1,DUM2,DUMT,DUMQV,DUMQSS,DUMQSI,DUMS,TMPNUM
------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1382): remark #7712: This variable has not been used. [CT]
REAL CT ! DROPLET ACTIVATION PARAMETER
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1383): remark #7712: This variable has not been used. [TEMP1]
REAL TEMP1 ! DUMMY TEMPERATURE
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1384): remark #7712: This variable has not been used. [SAT1]
REAL SAT1 ! DUMMY SATURATION
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1386): remark #7712: This variable has not been used. [KEL]
REAL KEL ! KELVIN PARAMETER
-------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [CRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [KRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMQI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMNI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DC0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DS0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
--------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DG0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1394): remark #7712: This variable has not been used. [DUMQR]
REAL DUMQC,DUMQR,RATIO,SUM_DEP,FUDGEF
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1397): remark #7712: This variable has not been used. [WEF]
REAL WEF
----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [ANUC]
REAL ANUC,BNUC
-----------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [BNUC]
REAL ANUC,BNUC
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(5967): remark #7712: This variable has not been used. [LAMBDA]
meltratio_outside, m_w, m_i, lambda, C_back, &
--------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(5904): remark #7712: This variable has not been used. [SIGMA]
REAL(8):: alpha,lambdas,sigma,nenner
------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(5981): remark #7712: This variable has not been used. [XW_A]
REAL(8):: D_large, D_g, rhog, x_w, xw_a, fm, fmgrenz, &
-----------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [II]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [JJ]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
----------------------------------------^
[868/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amoeba.f90.o
[869/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amebsa.f90.o
[870/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran_state.f90.o
[871/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_s.f90.o
[872/925] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/radiation_module.F90.o
[873/925] Linking Fortran static library src/Radiation/libradiation_lib.a
[874/925] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_v.f90.o
[875/925] Linking Fortran static library src/Numerical_recipes/libnumerical_recipes_lib.a
[876/925] Generating Fortran dyndep file src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Fortran.dd
[877/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/silhs_category_test.F90.o
[878/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_heaviside_tests.F90.o
[879/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Nc_Ncn_test.F90.o
[880/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/read_corr_mtx_test.F90.o
[881/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/corr_cholesky_mtx_tests.F90.o
[882/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/hole_filling_tests.F90.o
[883/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/KK_integrals_tests.F90.o
[884/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_min_max_tests.F90.o
[885/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/tuner_tests.F90.o
[886/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/w_up_in_cloud_tests.F90.o
[887/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/mu_sigma_hm_tests.F90.o
[888/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90.o
[889/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_init_cleanup.F90.o
[890/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/pdf_parameter_tests.F90.o
[891/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/morrison_microphys_module.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/Microphys/morrison_microphys_module.F90(20): remark #7712: This variable has not been used. [SATURATION_FORMULA]
saturation_formula, &
---------------^
[892/925] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/rev_direction_grid_test.F90.o
[893/925] Linking Fortran static library src/G_unit_test_types/libG_unit_test_lib.a
[894/925] Generating Fortran dyndep file src/CMakeFiles/G_unit_tests.dir/Fortran.dd
[895/925] Building Fortran object src/CMakeFiles/G_unit_tests.dir/G_unit_tests.F90.o
[896/925] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_driver.F90.o
[897/925] Linking Fortran static library src/Microphys/libmicrophys_lib.a
[898/925] Generating Fortran dyndep file src/CMakeFiles/clubb_driver_lib.dir/Fortran.dd
[899/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/extrapolation.F90.o
[900/925] Linking Fortran executable src/G_unit_tests
[901/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/hydrostatic_module.F90.o
[902/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/soil_vegetation.F90.o
[903/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_grads.F90.o
[904/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_netcdf.F90.o
[905/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_interpret.F90.o
[906/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/stat_file_utils.F90.o
[907/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/sounding.F90.o
[908/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_fields.F90.o
[909/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/generalized_grid_test.F90.o
[910/925] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/clubb_driver.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver.F90(4156): remark #7712: This variable has not been used. [CLUBB_PARAMS]
subroutine clean_up_clubb(ngrdcol, clubb_params, err_info)
-------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver.F90(4156): remark #7712: This variable has not been used. [ERR_INFO]
subroutine clean_up_clubb(ngrdcol, clubb_params, err_info)
---------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver.F90(2631): remark #7712: This variable has not been used. [ERR_INFO]
subroutine set_case_initial_conditions(ngrdcol, clubb_params, err_info)
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver.F90(4613): remark #7712: This variable has not been used. [GRID_ADAPT_IN_TIME_METHOD]
grid_adapt_in_time_method, &
----------------^
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver.F90(4612): remark #7712: This variable has not been used. [L_ADD_DYCORE_GRID]
l_add_dycore_grid, &
----------------^
[911/925] Linking Fortran static library src/libclubb_driver_lib.a
[912/925] Generating Fortran dyndep file src/CMakeFiles/clubb_standalone.dir/Fortran.dd
[913/925] Generating Fortran dyndep file src/CMakeFiles/clubb_thread_test.dir/Fortran.dd
[914/925] Generating Fortran dyndep file src/CMakeFiles/clubb_driver_test.dir/Fortran.dd
[915/925] Generating Fortran dyndep file src/CMakeFiles/clubb_tuner.dir/Fortran.dd
[916/925] Building Fortran object src/CMakeFiles/clubb_thread_test.dir/clubb_thread_test.F90.o
[917/925] Building Fortran object src/CMakeFiles/clubb_standalone.dir/clubb_standalone.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_standalone.F90(66): remark #7712: This variable has not been used. [ARG]
character(len=10) :: arg
-----------------------^
[918/925] Building Fortran object src/CMakeFiles/clubb_driver_test.dir/clubb_driver_test.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver_test.F90(74): remark #7712: This variable has not been used. [ARG]
character(len=10) :: arg
-----------------------^
[919/925] Linking Fortran executable src/clubb_thread_test
[920/925] Linking Fortran executable src/clubb_standalone
[921/925] Linking Fortran executable src/clubb_driver_test
[922/925] Building Fortran object src/CMakeFiles/clubb_tuner.dir/error.F90.o
[923/925] Building Fortran object src/CMakeFiles/clubb_tuner.dir/clubb_tuner.F90.o
/home/jenkins/workspace/clubb_driver_test_branch/src/clubb_tuner.F90(86): warning #8889: Explicit interface or EXTERNAL declaration is required. [PARAM_LOOPS_DRIVER]
call param_loops_driver( )
---------------^
[924/925] Linking Fortran executable src/clubb_tuner
[924/925] Install the project...
-- Install configuration: "Release"
-- Installing: /home/jenkins/workspace/clubb_driver_test_branch/install/ifx/libclubb_driver_lib.a
-- Installing: /home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_tuner
-- Set runtime path of "/home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_tuner" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_driver_test_branch/install/ifx/G_unit_tests
-- Set runtime path of "/home/jenkins/workspace/clubb_driver_test_branch/install/ifx/G_unit_tests" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_thread_test
-- Set runtime path of "/home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_thread_test" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_standalone
-- Set runtime path of "/home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_standalone" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_driver_test
-- Set runtime path of "/home/jenkins/workspace/clubb_driver_test_branch/install/ifx/clubb_driver_test" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
Setting CLUBB installation dir: /home/jenkins/workspace/clubb_driver_test_branch/install/ifx
Using inferred toolchain file: /home/jenkins/workspace/clubb_driver_test_branch/cmake/toolchains/linux_x86_64_ifx.cmake
about to cmnake /home/jenkins/workspace/clubb_driver_test_branch/build/ifx
Running CMake configure...
check_for_missing_threadprivate.py has begun.
File /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/corr_varnce_module.F90 failed:
Missing threadprivate for:
corr_array_n_below_def
corr_array_n_cloud_def
File /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/error_code.F90 failed:
Missing threadprivate for:
clubb_debug_level
File /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/sponge_layer_damping.F90 failed:
Missing threadprivate for:
up2_vp2_sponge_damp_profile
rtm_sponge_damp_settings
up2_vp2_sponge_damp_settings
wp3_sponge_damp_settings
wp2_sponge_damp_profile
wp3_sponge_damp_profile
thlm_sponge_damp_profile
uv_sponge_damp_settings
rtm_sponge_damp_profile
wp2_sponge_damp_settings
uv_sponge_damp_profile
thlm_sponge_damp_settings
[91mcheck_for_missing_threadprivate.py did not pass.[0m
[91mfailedFiles = ['/home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/corr_varnce_module.F90', '/home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/error_code.F90', '/home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/sponge_layer_damping.F90'][0m
[91m===============================================================
[91mTHREADPRIVATE CHECK FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_driver_test_branch/build/ifx/cmake_build_output.txt
[91m===============================================================[0m
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/sounding.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 377 : 102 chars : um(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 379 : 101 chars : vm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 381 : 101 chars : ugm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 383 : 101 chars : vgm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 385 : 101 chars : thlm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 387 : 101 chars : rtm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 389 : 101 chars : press(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 392 : 101 chars : wm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 409 : 108 chars : edsclr_snd(km1,edsclr), edsclr_snd(k00,edsclr), &
line 410 : 107 chars : edsclr_snd(kp1,edsclr), edsclr_snd(kp2,edsclr) )
line 434 : 118 chars : um(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), u(k_above), u(k_above-1) )
line 435 : 118 chars : vm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), v(k_above), v(k_above-1) )
line 436 : 120 chars : ugm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), ug(k_above), ug(k_above-1) )
line 437 : 120 chars : vgm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), vg(k_above), vg(k_above-1) )
line 438 : 126 chars : thlm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), theta(k_above), theta(k_above-1) )
line 439 : 120 chars : rtm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), rt(k_above), rt(k_above-1) )
line 440 : 112 chars : press(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), p_in_Pa(k_above), &
line 442 : 122 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
line 446 : 105 chars : sclrm(i,k,sclr) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), &
line 452 : 109 chars : edsclrm(i,k,edsclr) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), &
line 481 : 124 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
line 507 : 124 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_driver_test_branch/src/generalized_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 3: module generalized_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/generalized_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 908 : 106 chars : pdf_params_zm_flip%ice_supersat_frac_1(i,:) = flip( pdf_params_zm%ice_supersat_frac_1(i,:), nzm )
line 909 : 106 chars : pdf_params_zm_flip%ice_supersat_frac_2(i,:) = flip( pdf_params_zm%ice_supersat_frac_2(i,:), nzm )
line 911 : 117 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1080 : 101 chars : rtm_ref_flip, thlm_ref_flip, um_ref_flip, vm_ref_flip, ug_flip, vg_flip, & ! Intent(in)
line 1094 : 111 chars : um_flip, vm_flip, upwp_flip, vpwp_flip, up2_flip, vp2_flip, up3_flip, vp3_flip, & ! Intent(inout)
line 1096 : 111 chars : wp2_flip, wp3_flip, rtp2_flip, rtp3_flip, thlp2_flip, thlp3_flip, rtpthlp_flip, & ! Intent(inout)
line 1102 : 109 chars : wp2rtp_flip, wp2thlp_flip, uprcp_flip, vprcp_flip, rc_coef_zm_flip, wp4_flip, & ! intent(inout)
line 1103 : 105 chars : wpup2_flip, wpvp2_flip, wp2up2_flip, wp2vp2_flip, ice_supersat_frac_flip, & ! intent(inout)
line 1587 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1614 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2up_implicit, nzt, ngrdcol, &
line 1618 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2up_explicit, nzt, ngrdcol, &
line 1622 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2vp_implicit, nzt, ngrdcol, &
line 1626 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2vp_explicit, nzt, ngrdcol, &
line 1660 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpup2_implicit, nzt, ngrdcol, &
line 1664 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpup2_explicit, nzt, ngrdcol, &
line 1668 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpvp2_implicit, nzt, ngrdcol, &
line 1672 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpvp2_explicit, nzt, ngrdcol, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 199 : 110 chars : l_modify_ic_with_cubic_int, & ! Flag for interpolating the sounding profile with Steffen's monotone cubic
line 200 : 110 chars : ! method to obtain smoother initial condition profile, which is found to be
line 201 : 111 chars : ! beneficial to achive a better numerical solution convergence. If this flag
line 202 : 118 chars : ! is turned off, the initial conditions will be generated with linear interpolation.
line 203 : 111 chars : ! This is done on a case-by-case basis, since using the monotone cubic method
line 204 : 109 chars : ! requires a special sounding.in file with many additional sounding levels.
line 205 : 109 chars : l_modify_bc_for_cnvg_test, & ! Flag to activate modifications on boundary condition for convergence test
line 737 : 101 chars : !$omp sens_ht, latent_ht, lmin, vert_decorr_coef, deep_soil_T_in_K, sfc_soil_T_in_K, veg_T_in_K, &
line 753 : 102 chars : !$omp rtp2_mc, thlp2_mc, rtpthlp_mc, Ncm_mc, Ncm, Nccnm, em, tau_zm, tau_zt, Kh_zt, Kh_zm, rfrzm, &
line 754 : 105 chars : !$omp rrm, Nrm, Nc_in_cloud, wpNcp, radht, Frad, Frad_SW_up, Frad_LW_up, Frad_SW_down, Frad_LW_down, &
line 755 : 102 chars : !$omp wpsclrp_sfc, wpedsclrp_sfc, sclrm, wpsclrp, sclrp2, sclrp3, sclrprtp, sclrpthlp, sclrpthvp, &
line 800 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 1690 : 102 chars : open(unit=iunit_grid_adaptation, file=fname_grid_adaptation, status='replace', action='write')
line 2002 : 105 chars : allocate( um_ref(ngrdcol, gr%nzt) ) ! Reference u wind for nudging; Michael Falk, 17 Oct 2007
line 2003 : 105 chars : allocate( vm_ref(ngrdcol, gr%nzt) ) ! Reference v wind for nudging; Michael Falk, 17 Oct 2007
line 2493 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 2523 : 106 chars : ! Similar call to above, checking parameter values, but because we've placed this in "init_clubb_case"
line 2531 : 116 chars : write(fstderr, *) "Fatal error calling check_clubb_settings_api and/or check_parameters_api in clubb_driver"
line 2574 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 2586 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 2587 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 2590 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 2592 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 2598 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 2599 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 2600 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 2601 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 2602 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 2603 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 2604 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 2605 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 2606 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 2607 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 2722 : 103 chars : invrs_rho_ds_zt(i,k) = invrs_rho_ds_zt_init(k) ! inv. dry, static density: t-levs
line 2728 : 103 chars : um_pert(i,k) = zero ! Variables used to track perturbed version of winds.
line 2730 : 105 chars : wm_zt(i,k) = wm_zt_init(k) ! Imposed large scale w - Thermodynamic levels
line 2923 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 3015 : 106 chars : / sqrt( 4.0_core_rknd * ( 1.0_core_rknd - 0.4_core_rknd )**3 &
line 3016 : 118 chars : + clubb_params(ngrdcol,iSkw_max_mag)**2 ) ) ) ! Known magic number
line 3018 : 102 chars : ! Calculate nu_vert_res_dep and lmin, these change with clubb_params, commented out for now since
line 3136 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 3284 : 103 chars : um(i,:), vm(i,:), rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), &
line 3622 : 111 chars : !$acc X_nl_all_levs, X_mixt_comp_all_levs, lh_sample_point_weights, mu_x_1_n, mu_x_2_n, &
line 3624 : 104 chars : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped, &
line 3628 : 116 chars : !$acc pdf_params%cloud_frac_1, pdf_params%cloud_frac_2, pdf_params%cthl_1, pdf_params%cthl_2, &
line 3629 : 112 chars : !$acc pdf_params%crt_1, pdf_params%crt_2, pdf_params%stdev_chi_1, pdf_params%stdev_chi_2, &
line 3645 : 102 chars : wp2_zt = zm2zt_api( gr%nzm, gr%nzt, ngrdcol, gr, wp2, w_tol_sqd ) ! Positive definite quantity
line 3651 : 109 chars : thlm(i,:), p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), rtm(i,:), &! In
line 3652 : 109 chars : rcm(i,:), cloud_frac(i,:), wm_zt(i,:), wm_zm(i,:), wp2_zt(i,:), & ! In
line 3653 : 106 chars : hydromet(i,:,:), Nc_in_cloud(i,:), & ! In
line 3669 : 103 chars : stats_zt(i), stats_zm(i), & ! Inout
line 3670 : 103 chars : stats_sfc(i), stats_lh_zt(i), & ! Inout
line 3671 : 102 chars : Nccnm(i,:), & ! Inout
line 3672 : 117 chars : hydromet_mc(i,:,:), Ncm_mc(i,:), rcm_mc(i,:), rvm_mc(i,:), & ! Out
line 3673 : 107 chars : thlm_mc(i,:), hydromet_vel_zt(i,:,:), & ! Out
line 3674 : 102 chars : hydromet_vel_covar_zt_impc(i,:,:), & ! Out
line 3675 : 102 chars : hydromet_vel_covar_zt_expc(i,:,:), & ! Out
line 3676 : 110 chars : wprtp_mc(i,:), wpthlp_mc(i,:), rtp2_mc(i,:), & ! Out
line 3677 : 105 chars : thlp2_mc(i,:), rtpthlp_mc(i,:) ) ! Out
line 3701 : 103 chars : stats_zt(i), stats_zm(i), stats_sfc(i), & ! Inout
line 3702 : 103 chars : hydromet(i,:,:), hydromet_vel_zt(i,:,:), hydrometp2(i,:,:), & ! Inout
line 3703 : 103 chars : K_hm(i,:,:), Ncm(i,:), Nc_in_cloud(i,:), rvm_mc(i,:), & ! Inout
line 3704 : 103 chars : thlm_mc(i,:), err_info, & ! Inout
line 3705 : 101 chars : wphydrometp(i,:,:), wpNcp(i,:) ) ! Out
line 3714 : 106 chars : !$acc update device( rcm_mc, rvm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3772 : 104 chars : !$acc update host( rvm_mc, rcm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3778 : 105 chars : call stat_update_var( stats_metadata%irtm_mc, rvm_mc(i,:)+rcm_mc(i,:), stats_zt(i) ) ! kg/kg/s
line 3780 : 106 chars : call stat_update_var( stats_metadata%iwprtp_mc, wprtp_mc(i,:), stats_zm(i) ) ! m*(kg/kg)/s^2
line 3782 : 104 chars : call stat_update_var( stats_metadata%irtp2_mc, rtp2_mc(i,:), stats_zm(i) ) ! (kg/kg)^2/s
line 3784 : 104 chars : call stat_update_var( stats_metadata%irtpthlp_mc, rtpthlp_mc(i,:), stats_zm(i) ) ! K*(kg/kg)/s
line 3801 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, X_nl_all_levs, &
line 3827 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, thlm, rtm, rcm )
line 3873 : 106 chars : call update_radiation_variables( gr%nzm, gr%nzt, radht(i,:), Frad_SW_up(i,:), Frad_LW_up(i,:), &
line 3972 : 104 chars : clubb_config_flags%grid_remap_method, & ! intent(in)
line 4040 : 101 chars : .and. (stats_metadata%l_stats_last) ) then ! only adapt grid when the average of the last
line 4144 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_scheme = ', time_microphys_scheme
line 4145 : 104 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_advance = ', time_microphys_advance
line 4147 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_output_multi_col = ', time_output_multi_col
line 4269 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 4281 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 4282 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 4285 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 4287 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 4293 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 4294 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 4295 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 4296 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 4297 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 4298 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 4299 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 4300 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 4301 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 4302 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 4331 : 119 chars : if ( thlm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( thlm_sponge_damp_profile )
line 4332 : 118 chars : if ( rtm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( rtm_sponge_damp_profile )
line 4333 : 117 chars : if ( uv_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( uv_sponge_damp_profile )
line 4334 : 118 chars : if ( wp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp2_sponge_damp_profile )
line 4335 : 118 chars : if ( wp3_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp3_sponge_damp_profile )
line 4336 : 122 chars : if ( up2_vp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( up2_vp2_sponge_damp_profile )
line 5012 : 104 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 5020 : 106 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 5034 : 101 chars : 'be used for cases with forcings from an input file and for the atex ', &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/soil_vegetation.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 174 : 103 chars : call stat_update_var_pt( stats_metadata%isfc_soil_T_in_K, 1, sfc_soil_T_in_K(i), stats_sfc(i) )
line 175 : 105 chars : call stat_update_var_pt( stats_metadata%ideep_soil_T_in_K, 1, deep_soil_T_in_K(i), stats_sfc(i) )
line 212 : 101 chars : call stat_update_var_pt( stats_metadata%isoil_heat_flux, 1, soil_heat_flux(i), & ! intent(in)
line 213 : 104 chars : stats_sfc(i) ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/clubb_driver_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 111 : 107 chars : write(fstderr, *) "This section ensures that everything allocated in init_clubb_case will be deallocated"
line 112 : 102 chars : write(fstderr, *) "in clean_up_clubb. This may cause a runtime error if there is a mismatch between"
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/advance_xm_wpxp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 782 : 101 chars : call wpxp_term_pr1_lhs( nzm, ngrdcol, gr, C6rt_Skw_fnc, C6thl_Skw_fnc, C7_Skw_fnc, & ! Intent(in)
line 783 : 101 chars : invrs_tau_C6_zm, l_scalar_calc, & ! Intent(in)
line 784 : 102 chars : lhs_pr1_wprtp, lhs_pr1_wpthlp, lhs_pr1_wpsclrp ) ! Intent(out)
line 862 : 101 chars : stats_zt, stats_zm, stats_sfc, & ! InOut
line 863 : 101 chars : rtm, wprtp, thlm, wpthlp, sclrm, wpsclrp, & ! InOut
line 864 : 101 chars : err_info ) ! InOut
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/sfc_varnce_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 776 : 105 chars : call sfc_varnce_check( sclr_dim, wp2(i,gr%k_lb_zm), up2(i,gr%k_lb_zm), & ! intent(in)
line 777 : 105 chars : vp2(i,gr%k_lb_zm), thlp2(i,gr%k_lb_zm), rtp2(i,gr%k_lb_zm), & ! intent(in)
line 778 : 105 chars : rtpthlp(i,gr%k_lb_zm), sclrp2(i,gr%k_lb_zm,:), & ! intent(in)
line 779 : 105 chars : sclrprtp(i,gr%k_lb_zm,:), sclrpthlp(i,gr%k_lb_zm,:), & ! intent(in)
line 780 : 108 chars : err_info ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/grid_adaptation_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 128 chars : write(fstderr, *) "The fixed minimum grid density momentum heights need to cover at least the domain of the physics grid."
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/pdf_parameter_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 101 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 298 : 102 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 300 : 101 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/stats_clubb_utilities.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 3024 : 103 chars : call stat_update_var( stats_metadata%icovar_chi_eta_1, pdf_params%covar_chi_eta_1(icol,:), & ! In
line 3026 : 103 chars : call stat_update_var( stats_metadata%icovar_chi_eta_2, pdf_params%covar_chi_eta_2(icol,:), & ! In
line 3036 : 101 chars : call stat_update_var( stats_metadata%icorr_chi_eta_1, pdf_params%corr_chi_eta_1(icol,:), & ! In
line 3038 : 101 chars : call stat_update_var( stats_metadata%icorr_chi_eta_2, pdf_params%corr_chi_eta_2(icol,:), & ! In
line 3099 : 101 chars : chip2 = compute_variance_binormal( chi, pdf_params%chi_1(icol,:), pdf_params%chi_2(icol,:), &
line 3100 : 106 chars : pdf_params%stdev_chi_1(icol,:), pdf_params%stdev_chi_2(icol,:), &
line 4119 : 108 chars : 'floor stuff= ', floor( stats_metadata%stats_tout / stats_metadata%stats_tsamp )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/advance_windm_edsclrm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1002 : 103 chars : call windm_edsclrm_rhs( nzm, nzt, ngrdcol, gr, windm_edsclrm_scalar, dt, & ! intent(in)
line 1003 : 103 chars : lhs_diff, edsclrm(:,:,edsclr), & ! intent(in)
line 1004 : 103 chars : edsclrm_forcing(:,:,edsclr), & ! intent(in)
line 1005 : 103 chars : rho_ds_zm, invrs_rho_ds_zt, & ! intent(in)
line 1006 : 103 chars : l_imp_sfc_momentum_flux, wpedsclrp(:,gr%k_lb_zm,edsclr), & ! intent(in)
line 1007 : 103 chars : stats_metadata, & ! intent(in)
line 1008 : 106 chars : stats_zt, & ! intent(inout)
line 1009 : 104 chars : rhs(:,:,edsclr) ) ! intent(out)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/mono_flux_limiter.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 688 : 104 chars : !$acc parallel loop gang vector collapse(2) default(present) reduction(.or.:l_any_adjustment_needed)
line 839 : 121 chars : ! MONOFLUX TEST COMMENT DO NOT REMOVE if( any(wpxp_net_adjust /= 0.0) ) write(fstderr,*) "MONOFLUX: wpxp adjusted "
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 4: module err_info_type_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 265 : 102 chars : write(err_info%err_header_global,'(A38, I3, A15, I3, A, A28, A33, F6.2, A1, F6.2, A, A39, A40)') &
line 276 : 105 chars : write(err_info%err_header(i),'(A38, I3, A15, I3, A, A22, I2, A11, F6.2, A13, F6.2, A, A39, A40)') &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/stats_zm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2449 : 104 chars : call stat_assign( var_index=stats_metadata%inorm_min_grid_dens, var_name="norm_min_grid_dens", &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/advance_xp2_xpyp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1319 : 101 chars : sclrprtp(:,:,sclr) ) ! Intent(inout)
line 1354 : 102 chars : sclrpthlp(:,:,sclr) ) ! Intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/CLUBB_core/output_netcdf.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1748 : 105 chars : status = nf90_def_var( ncid_zm, "columns", NF90_INT, (/column_id_zm/), column_var_id_zm )
line 1749 : 104 chars : status = nf90_def_var( ncid_zm, "altitude", NF90_PREC, (/vertical_id_zm/), vertical_var_id_zm )
line 1750 : 104 chars : status = nf90_def_var( ncid_zm, "time", NF90_PREC, (/time_id_zm/), time_var_id_zm )
line 1802 : 105 chars : status = nf90_def_var( ncid_zt, "columns", NF90_INT, (/column_id_zt/), column_var_id_zt )
line 1803 : 104 chars : status = nf90_def_var( ncid_zt, "altitude", NF90_PREC, (/vertical_id_zt/), vertical_var_id_zt )
line 1804 : 104 chars : status = nf90_def_var( ncid_zt, "time", NF90_PREC, (/time_id_zt/), time_var_id_zt )
line 1850 : 101 chars : status = nf90_put_var( ncid_zm, column_var_id_zm, column_list, start=(/1/), count=(/ngrdcol/) )
line 1851 : 101 chars : status = nf90_put_var( ncid_zt, column_var_id_zt, column_list, start=(/1/), count=(/ngrdcol/) )
line 1853 : 101 chars : !=================================== Allocate Output Arrays ===================================
line 1980 : 116 chars : !$acc upwp_out, vpwp_out, up2_out, vp2_out, wp3_out, rcm_out, cloud_frac_out, rtm_out, thlm_out )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 12 check(s) failed.
CLUBBStandardsCheck.py has begun.
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_driver_test_branch/src/SILHS/mt95.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 362: subroutine init_by_type( put, get )
line 382: subroutine init_by_scalar( put )
line 413: subroutine init_by_array( put )
line 461: subroutine next_state( )
line 593: subroutine genrand_int32_0d( y )
line 614: subroutine genrand_int32_1d( y )
line 629: subroutine genrand_int32_2d( y )
line 644: subroutine genrand_int32_3d( y )
line 659: subroutine genrand_int32_4d( y )
line 674: subroutine genrand_int32_5d( y )
line 689: subroutine genrand_int32_6d( y )
line 704: subroutine genrand_int32_7d( y )
line 720: subroutine genrand_int31_0d( y )
line 732: subroutine genrand_int31_1d( y )
line 747: subroutine genrand_int31_2d( y )
line 762: subroutine genrand_int31_3d( y )
line 777: subroutine genrand_int31_4d( y )
line 792: subroutine genrand_int31_5d( y )
line 807: subroutine genrand_int31_6d( y )
line 822: subroutine genrand_int31_7d( y )
line 838: subroutine genrand_real1_0d( r )
line 853: subroutine genrand_real1_1d( r )
line 868: subroutine genrand_real1_2d( r )
line 883: subroutine genrand_real1_3d( r )
line 898: subroutine genrand_real1_4d( r )
line 913: subroutine genrand_real1_5d( r )
line 928: subroutine genrand_real1_6d( r )
line 943: subroutine genrand_real1_7d( r )
line 959: subroutine genrand_real2_0d( r )
line 974: subroutine genrand_real2_1d( r )
line 989: subroutine genrand_real2_2d( r )
line 1004: subroutine genrand_real2_3d( r )
line 1019: subroutine genrand_real2_4d( r )
line 1034: subroutine genrand_real2_5d( r )
line 1049: subroutine genrand_real2_6d( r )
line 1064: subroutine genrand_real2_7d( r )
line 1080: subroutine genrand_real3_0d( r )
line 1095: subroutine genrand_real3_1d( r )
line 1110: subroutine genrand_real3_2d( r )
line 1125: subroutine genrand_real3_3d( r )
line 1140: subroutine genrand_real3_4d( r )
line 1155: subroutine genrand_real3_5d( r )
line 1170: subroutine genrand_real3_6d( r )
line 1185: subroutine genrand_real3_7d( r )
line 1201: subroutine genrand_res53_0d( r )
line 1218: subroutine genrand_res53_1d( r )
line 1233: subroutine genrand_res53_2d( r )
line 1248: subroutine genrand_res53_3d( r )
line 1263: subroutine genrand_res53_4d( r )
line 1278: subroutine genrand_res53_5d( r )
line 1293: subroutine genrand_res53_6d( r )
line 1308: subroutine genrand_res53_7d( r )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 1 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/wangara.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 104 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 105 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/mpace_a.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 272 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 273 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module prescribe_forcings_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 299 : 104 chars : !$acc enter data create( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 465 : 118 chars : !$acc update device( wm_zt, wm_zm, thlm_forcing, rtm_forcing, um_ref, vm_ref, sclrm_forcing, edsclrm_forcing )
line 867 : 105 chars : call stat_update_var_pt( stats_metadata%ish, 1, wpthlp_sfc(i)*rho_zm(i,1)*Cp,& ! intent(in)
line 870 : 105 chars : call stat_update_var_pt( stats_metadata%ilh, 1, wprtp_sfc(i)*rho_zm(i,1)*Lv, & ! intent(in)
line 873 : 103 chars : call stat_update_var_pt( stats_metadata%iwpthlp_sfc, 1, wpthlp_sfc(i), & ! intent(in)
line 876 : 103 chars : call stat_update_var_pt( stats_metadata%iwprtp_sfc, 1, wprtp_sfc(i), & ! intent(in)
line 879 : 103 chars : call stat_update_var_pt( stats_metadata%iupwp_sfc, 1, upwp_sfc(i), & ! intent(in)
line 882 : 103 chars : call stat_update_var_pt( stats_metadata%ivpwp_sfc, 1, vpwp_sfc(i), & ! intent(in)
line 885 : 102 chars : call stat_update_var_pt( stats_metadata%iustar, 1, ustar(i), & ! intent(in)
line 888 : 103 chars : call stat_update_var_pt( stats_metadata%iT_sfc, 1, T_sfc(i), & ! intent(in)
line 894 : 103 chars : !$acc exit data delete( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 1097 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1101 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1105 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1106 : 112 chars : exner_zm(i,km1), exner_zm(i,k00), exner_zm(i,kp1), exner_zm(i,kp2) )
line 1109 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1110 : 108 chars : thlm_zm(i,km1), thlm_zm(i,k00), thlm_zm(i,kp1), thlm_zm(i,kp2) )
line 1113 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1114 : 104 chars : rtm_zm(i,km1), rtm_zm(i,k00), rtm_zm(i,kp1), rtm_zm(i,kp2) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/rico.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 159 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 160 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/dycoms2_rf02.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 121 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 122 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/bomex.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 127 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 128 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/dycoms2_rf01.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 91 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 92 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/gabls2.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 152 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 153 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/mpace_b.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 157 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 158 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/Benchmark_cases/lba.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 96 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 97 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
line 176 : 101 chars : wpthlp_sfc(i) = convert_sens_ht_to_km_s( ( 270._core_rknd * ft**1.5_core_rknd ), rho_sfc(i) )
line 177 : 101 chars : wprtp_sfc(i) = convert_latent_ht_to_m_s( ( 554._core_rknd * ft**1.3_core_rknd ), rho_sfc(i) )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 11 check(s) failed.
No matches for /home/jenkins/workspace/clubb_driver_test_branch/src/KK_microphys/
CLUBBStandardsCheck.py has begun.
--------------------- Default Private Check: /home/jenkins/workspace/clubb_driver_test_branch/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module rev_direction_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_driver_test_branch/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 232 : 113 chars : !seed used = -1102123834 1480475276 -248259584 525496705 1614213535 -1267052688 6290033 -78466652
line 233 : 127 chars : !seed_output = (/ -1102123834, 1480475276, -248259584, 525496705, 1614213535, -1267052688, 6290033, -78466652 /)
line 749 : 101 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 753 : 104 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
line 794 : 101 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 800 : 104 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 2 check(s) failed.
[91m===============================================================
[91mCLUBBStandardsCheck FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_driver_test_branch/build/ifx/cmake_build_output.txt
[91m===============================================================[0m
[93mBuild completed successfully, but some source code checks have failed.[0m
+ ulimit -s 8388608
+ run_scripts/run_scm_all.py -ngrdcol 4 -max_iters 500 -out_dir standalone_output
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
=================== Runs Complete ===================
All cases ran to completion.
+ run_scripts/run_scm_all.py -ngrdcol 4 -max_iters 500 -out_dir driver_test_output -exe install/latest/clubb_driver_test
Performing standard run
Running arm
Error in case arm:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running arm ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running arm_97
Error in case arm_97:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running arm_97 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running astex_a209
Error in case astex_a209:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running astex_a209 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running atex
Error in case atex:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running atex ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running bomex
Error in case bomex:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running bomex ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running cgils_s6
Error in case cgils_s6:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running cgils_s6 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running cgils_s11
Error in case cgils_s11:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running cgils_s11 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running cgils_s12
Error in case cgils_s12:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running cgils_s12 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running clex9_nov02
Error in case clex9_nov02:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running clex9_nov02 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running clex9_oct14
Error in case clex9_oct14:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running clex9_oct14 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running dycoms2_rf01
Error in case dycoms2_rf01:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running dycoms2_rf01 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running dycoms2_rf01_fixed_sst
Error in case dycoms2_rf01_fixed_sst:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running dycoms2_rf01_fixed_sst ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running dycoms2_rf02_do
Error in case dycoms2_rf02_do:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running dycoms2_rf02_do ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running dycoms2_rf02_ds
Error in case dycoms2_rf02_ds:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running dycoms2_rf02_ds ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running dycoms2_rf02_nd
Error in case dycoms2_rf02_nd:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running dycoms2_rf02_nd ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running dycoms2_rf02_so
Error in case dycoms2_rf02_so:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running dycoms2_rf02_so ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running fire
Error in case fire:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running fire ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running gabls2
Error in case gabls2:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running gabls2 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running gabls3
Error in case gabls3:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running gabls3 ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running gabls3_night
Error in case gabls3_night:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running gabls3_night ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running jun25_altocu
Error in case jun25_altocu:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running jun25_altocu ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running lba
Error in case lba:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running lba ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running mc3e
Error in case mc3e:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running mc3e ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running mpace_a
Error in case mpace_a:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running mpace_a ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running mpace_b
Error in case mpace_b:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running mpace_b ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running mpace_b_silhs
Error in case mpace_b_silhs:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running mpace_b_silhs ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running nov11_altocu
Error in case nov11_altocu:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running nov11_altocu ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running rico
Error in case rico:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running rico ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running rico_silhs
Error in case rico_silhs:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running rico_silhs ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running twp_ice
Error in case twp_ice:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running twp_ice ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
Running wangara
Error in case wangara:
Duplicating params
- Initial values file: '/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/../input/tunable_parameters/tunable_parameters.in'
- Duplicating '4' times.
Writing to '/home/jenkins/workspace/clubb_driver_test_branch/tmp_dup_params.in':
- ngrdcol = 4
- l_output_multi_col = .true.
- l_output_double_prec = .true.
- calls_per_out = 1
- using executable: install/latest/clubb_driver_test
=================== Running wangara ===================
Traceback (most recent call last):
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 331, in <module>
main()
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 318, in main
result = run_case(executable, clubb_input_namelist)
File "/home/jenkins/workspace/clubb_driver_test_branch/run_scripts/run_scm.py", line 39, in run_case
result = subprocess.run([executable],cwd=RUN_SCRIPTS)
File "/usr/lib/python3.10/subprocess.py", line 503, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.10/subprocess.py", line 971, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.10/subprocess.py", line 1863, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'install/latest/clubb_driver_test'
=================== Runs Complete ===================
arm failure
arm_97 failure
astex_a209 failure
atex failure
bomex failure
cgils_s6 failure
cgils_s11 failure
cgils_s12 failure
clex9_nov02 failure
clex9_oct14 failure
dycoms2_rf01 failure
dycoms2_rf01_fixed_sst failure
dycoms2_rf02_do failure
dycoms2_rf02_ds failure
dycoms2_rf02_nd failure
dycoms2_rf02_so failure
fire failure
gabls2 failure
gabls3 failure
gabls3_night failure
jun25_altocu failure
lba failure
mc3e failure
mpace_a failure
mpace_b failure
mpace_b_silhs failure
nov11_altocu failure
rico failure
rico_silhs failure
twp_ice failure
wangara failure
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (All cases + multi_col with nvhpc + openacc)
Stage "All cases + multi_col with nvhpc + openacc" skipped due to earlier failure(s)
[Pipeline] getContext
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Declarative: Post Actions)
[Pipeline] script
[Pipeline] {
[Pipeline] }
[Pipeline] // script
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
[Pipeline] // node
[Pipeline] End of Pipeline
ERROR: script returned exit code 1
Finished: FAILURE
![[Jenkins]](/jenkins/static/9dada5b8/images/svgs/logo.svg){kind=logo}
