Console Output
Skipping 53 KB..
Full Log^
[ 63%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/gases_ckd.F90.o[0m
[ 63%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/newexp.F90.o[0m
[ 64%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/variables_radiation_module.F90.o[0m
[ 64%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_lwr.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(295): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(303): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(323): warning #8889: Explicit interface or EXTERNAL declaration is required. [GASCON]
call gascon
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(334): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP1]
call comscp1
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(358): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP2]
call comscp2
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(384): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_LW]
call two_rt_lw
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(391): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_LW]
call two_rt_lw
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(22): remark #7712: This variable has not been used. [CLDAMT]
+, cirho , o3mix , ts , cldamt
---------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [CLDMAX]
+, cldmax , b1 , b2 , b3
-------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B1]
+, cldmax , b1 , b2 , b3
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B2]
+, cldmax , b1 , b2 , b3
----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B3]
+, cldmax , b1 , b2 , b3
-------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_lwr.F(24): remark #7712: This variable has not been used. [B4]
+, b4 , umco2 , umch4 , umn2o
-----------------------------^
[ 64%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_rad.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_rad.F(586): warning #8889: Explicit interface or EXTERNAL declaration is required. [BUGS_LWR]
call bugs_lwr
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_rad.F(709): warning #8889: Explicit interface or EXTERNAL declaration is required. [BUGS_SWR]
call bugs_swr
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_rad.F(27): remark #7712: This variable has not been used. [QRIL]
+, qcwl , qcil , qril , o3l
-----------------------------------------------^
[ 65%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_swr.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(332): warning #8889: Explicit interface or EXTERNAL declaration is required. [RAYLE]
call rayle
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(341): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(349): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(369): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP1]
call comscp1
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(393): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP2]
call comscp2
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(402): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_SW]
call two_rt_sw
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(409): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_SW]
call two_rt_sw
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(26): remark #7712: This variable has not been used. [TS]
+, cirho , o3mix , ts , amu0
------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(28): remark #7712: This variable has not been used. [CLDAMT]
+, alndr , cldamt , cldmax , umco2
---------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(28): remark #7712: This variable has not been used. [CLDMAX]
+, alndr , cldamt , cldmax , umco2
--------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(29): remark #7712: This variable has not been used. [B1]
+, umch4 , umn2o , b1 , b2
------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(29): remark #7712: This variable has not been used. [B2]
+, umch4 , umn2o , b1 , b2
-----------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B3]
+, b3 , b4 , fdsw , fdswcl
---------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B4]
+, b3 , b4 , fdsw , fdswcl
-------------------------------------^
[ 65%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/cloudg.F.o[0m
[ 65%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/comscp1.F.o[0m
[ 66%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/comscp2.F.o[0m
[ 67%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/rayle.F.o[0m
[ 67%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw.F.o[0m
[ 67%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_iter.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_iter.F(135): remark #7712: This variable has not been used. [FAIL]
& fail
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_iter.F(12): remark #7712: This variable has not been used. [SEL_RULES]
+, sel_rules , b1 , b2 , b3
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_iter.F(113): remark #7712: This variable has not been used. [EXPTAU]
&, exptau !
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_iter.F(128): remark #7712: This variable has not been used. [PROP]
&, kappa , oms , prop ,r, rinf
--------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_iter.F(138): remark #7712: This variable has not been used. [TAUSTHRESH]
& tausthresh
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_iter.F(139): remark #7712: This variable has not been used. [WCTHRESH]
&, wcthresh
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_iter.F(140): remark #7712: This variable has not been used. [TAUSCAT]
&, tauscat
--------^
[ 67%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_ocastrndm.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(3): remark #7712: This variable has not been used. [CLDAMT]
ib , cldamt , wc_cld, wc_clr, &
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(109): remark #7712: This variable has not been used. [EXPTAU]
exptau
-----^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(121): remark #7712: This variable has not been used. [CLD_RAN]
cld_ran, & !The random overlap fraction of cloud
-----^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_lw_ocastrndm.F90(122): remark #7712: This variable has not been used. [CMIN]
cmin !Minimum cloud fraction in a column
-----^
[ 67%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_sel.F.o[0m
[ 68%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_bs.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_bs.F(142): remark #7712: This variable has not been used. [FAIL]
& fail
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_bs.F(11): remark #7712: This variable has not been used. [SEL_RULES]
+, fddif ,sel_rules , b1 , b2
-----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_bs.F(145): remark #7712: This variable has not been used. [TAUSTHRESH]
& tausthresh
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_bs.F(146): remark #7712: This variable has not been used. [WCTHRESH]
&, wcthresh
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_bs.F(147): remark #7712: This variable has not been used. [TAUSCAT]
&, tauscat
--------^
[ 68%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw.F.o[0m
[ 68%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_iter.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_iter.F(139): remark #7712: This variable has not been used. [FAIL]
& fail
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_iter.F(11): remark #7712: This variable has not been used. [SEL_RULES]
+, fddif ,sel_rules , b1 , b2
-----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_iter.F(142): remark #7712: This variable has not been used. [TAUSTHRESH]
& tausthresh
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_iter.F(143): remark #7712: This variable has not been used. [WCTHRESH]
&, wcthresh
--------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_iter.F(144): remark #7712: This variable has not been used. [TAUSCAT]
&, tauscat
--------^
[ 68%] [32mBuilding Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_ocastrndm.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Radiation/BUGSrad/two_rt_sw_ocastrndm.F90(7): remark #7712: This variable has not been used. [CLDAMT]
cldamt , c_maximal , cf_max, cf_random )
-----^
[ 68%] [32m[1mLinking Fortran static library libbugsrad_lib.a[0m
[ 68%] Built target bugsrad_lib
[35m[1mScanning dependencies of target microphys_utils_lib[0m
[ 68%] [32mBuilding Fortran object src/Microphys/Microphys_utils/CMakeFiles/microphys_utils_lib.dir/microphys_stats_vars_module.F90.o[0m
[ 68%] [32m[1mLinking Fortran static library libmicrophys_utils_lib.a[0m
[ 68%] Built target microphys_utils_lib
[35m[1mScanning dependencies of target KK_microphys_lib[0m
[ 68%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Parabolic_constants.f90.o[0m
[ 68%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/AiryFunction.f90.o[0m
[ 69%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/parameters_KK.F90.o[0m
[ 69%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Parabolic.f90.o[0m
[ 69%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_utilities.F90.o[0m
[ 69%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_means.F90.o[0m
[ 69%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_means.F90.o[0m
[ 70%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_Nrm_tendencies.F90.o[0m
[ 70%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_local_means.F90.o[0m
[ 70%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_covar.F90.o[0m
[ 70%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_covariances.F90.o[0m
[ 70%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_turbulent_sed.F90.o[0m
[ 71%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_variances.F90.o[0m
[ 71%] [32mBuilding Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_all_MM.F90.o[0m
[ 71%] [32m[1mLinking Fortran static library libKK_microphys_lib.a[0m
[ 71%] Built target KK_microphys_lib
[35m[1mScanning dependencies of target silhs_lib[0m
[ 71%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/est_kessler_microphys_module.F90.o[0m
[ 71%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_arrays.F90.o[0m
[ 71%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/mt95.F90.o[0m
[ 72%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/generate_uniform_sample_module.F90.o[0m
[ 73%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/math_utilities.F90.o[0m
[ 73%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/output_2D_samples_module.F90.o[0m
[ 73%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/parameters_silhs.F90.o[0m
[ 73%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_importance_sample_module.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/SILHS/silhs_importance_sample_module.F90(901): warning #5462: Global name too long, shortened from: silhs_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER to: s_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER
num_categories_in_cluster = (/ 1, 1, 1, 1, 1, 1, 1, 1 /)
------^
[ 74%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/transform_to_pdf_module.F90.o[0m
[ 74%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_driver_module.F90.o[0m
[ 74%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/lh_microphys_var_covar_module.F90.o[0m
[ 74%] [32mBuilding Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_api_module.F90.o[0m
[ 74%] [32m[1mLinking Fortran static library libsilhs_lib.a[0m
[ 74%] Built target silhs_lib
[35m[1mScanning dependencies of target radiation_lib[0m
[ 75%] [32mBuilding Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/extended_atmosphere_module.F90.o[0m
[ 75%] [32mBuilding Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/parameters_radiation.F90.o[0m
[ 75%] [32mBuilding Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/bugsrad_driver.F90.o[0m
[ 75%] [32mBuilding Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/cos_solar_zen_module.F90.o[0m
[ 75%] [32mBuilding Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/rad_lwsw_module.F90.o[0m
[ 75%] [32mBuilding Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/simple_rad_module.F90.o[0m
[ 76%] [32mBuilding Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/radiation_module.F90.o[0m
[ 76%] [32m[1mLinking Fortran static library libradiation_lib.a[0m
[ 76%] Built target radiation_lib
[35m[1mScanning dependencies of target coamps_lib[0m
[ 76%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/adjmlt.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(5): remark #7712: This variable has not been used. [ARY1D]
4 ,twodt,pcut,tzero,lgrpl,ary1d,maxpt1d,kmax
-------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(6): remark #7712: This variable has not been used. [I1DFLG]
5 ,maxvr1d,n1d,i1dflg,i1d,j1d,j,icomp,m,len)
--------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(6): remark #7712: This variable has not been used. [I1D]
5 ,maxvr1d,n1d,i1dflg,i1d,j1d,j,icomp,m,len)
---------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(6): remark #7712: This variable has not been used. [J1D]
5 ,maxvr1d,n1d,i1dflg,i1d,j1d,j,icomp,m,len)
-------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(6): remark #7712: This variable has not been used. [J]
5 ,maxvr1d,n1d,i1dflg,i1d,j1d,j,icomp,m,len)
-----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(6): remark #7712: This variable has not been used. [ICOMP]
5 ,maxvr1d,n1d,i1dflg,i1d,j1d,j,icomp,m,len)
-------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(14): remark #7712: This variable has not been used. [IP]
integer ip
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(16): remark #7712: This variable has not been used. [JP]
integer jp
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(22): remark #7712: This variable has not been used. [NP]
integer np
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(63): remark #7712: This variable has not been used. [K]
integer k
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(72): remark #7712: This variable has not been used. [ABS8]
real abs8
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(73): remark #7712: This variable has not been used. [ABS9]
real abs9
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(83): remark #7712: This variable has not been used. [TST]
real tst
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjmlt.F(84): remark #7712: This variable has not been used. [TP3]
real tp3
------------^
[ 76%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/adjtq.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(571): warning #8889: Explicit interface or EXTERNAL declaration is required. [SLOPE]
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(597): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESATV]
call esatv(tttemp,apbp ,mkk)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(598): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESATI]
call esati(tttemp,appbpp,mkk)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(720): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQG]
call tgqg(fallg,qgtemp,sfgraup,pterm4,pcut,abar,bgrp,mkk)
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(723): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQR]
call tgqr(fallr,falln,qrtemp,sfraincm,nrtemp,rbar2d,pterm4,pcut,
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(726): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQS]
call tgqs(falls,qstemp,sfsnow,pterm4,pcut,aprpr,bsnow,mkk)
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(728): warning #8889: Explicit interface or EXTERNAL declaration is required. [FRZH]
call frzh(pchomo,tttemp,qctemp,pcut,twodt,mkk)
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(735): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA22]
call eqa22(psacw,qctemp,qstemp,tttemp,termb,esc
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(742): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA25]
call eqa25(psmlt,qstemp,tttemp,terma,rbar2d,pi,snzero
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(749): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA28]
call eqa28(psmlti,qitemp,tttemp,pcut,twodt,tzero,mkk)
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(760): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA11G]
if(lgrpl)call eqa11g(pgacw,qgtemp,qctemp,tttemp,sfgraup,xa,iwx1
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(767): warning #8889: Explicit interface or EXTERNAL declaration is required. [CONICE]
call conice(nitemp,nuci,tttemp,qvtemp,qsatv,qsati,qctemp,qitemp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(787): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQI]
call tgqi(falli,qitemp,rbar2d,pr,nitemp,pcut,p00,cimass
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(795): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA27R]
call eqa27r(piacw,qctemp,qitemp,tttemp,falli,nitemp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(803): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA7G]
call eqa7g(piacr,qitemp,qrtemp,rbar2d,tttemp,sfrain,iwx1,nitemp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(812): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA8G]
call eqa8g(psacr,qrtemp,qstemp,rbar2d,tttemp,fallr,falls
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(821): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA9G]
if(lgrpl)call eqa9g(pracs,qrtemp,qstemp,rbar2d,fallr,falls
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(830): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA13G]
if(lgrpl)call eqa13g(pgacr,qrtemp,qgtemp,tttemp,rbar2d
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(839): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA18G]
if(lgrpl)call eqa18g(pgmlt,qgtemp,tttemp,iwx1,termg,rbar2d
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(847): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA21G]
if(lgrpl)call eqa21g(pgacrm,pgacr,tttemp,rbar2d,qgtemp
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(855): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA22G]
if(lgrpl)call eqa22g(pgacwm,pgacw,tttemp,rbar2d,qgtemp
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(864): warning #8889: Explicit interface or EXTERNAL declaration is required. [ADJMLT]
call adjmlt(delta1,delta2,delta3,qctemp,qgtemp,qitemp,qrtemp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(874): warning #8889: Explicit interface or EXTERNAL declaration is required. [QSATVI]
call qsatvi(tttemp,pr,qsatv,qsati,lice,mkk)
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(892): warning #8889: Explicit interface or EXTERNAL declaration is required. [QSATVI]
call qsatvi(tdum,pr,qvsdum,qsidum,lice,mkk)
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(893): warning #8889: Explicit interface or EXTERNAL declaration is required. [QTADJ]
call qtadj(tdum,qdum,pr,qvsdum,qsidum,qadjw,tadjw
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(904): warning #8889: Explicit interface or EXTERNAL declaration is required. [QTADJ]
call qtadj(tttemp,qvtemp,pr,qsatv,qsati,qadjw,tadjw
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(919): warning #8889: Explicit interface or EXTERNAL declaration is required. [SLOPE]
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1018): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA6]
call eqa6(pcond,tttemp,qadjw,qvtemp,qctemp,qsatv,qsati,pr
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1027): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA12]
call eqa12(prevp,qrtemp,qvtemp,qadjw,qsatv,rbar2d,tttemp,sfrain
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1039): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA27]
call eqa27(pmltse,qstemp,qvtemp,qsatv,qadjw,tttemp,terma,apbp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1049): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA19G]
if(lgrpl)call eqa19g(pmltge,qgtemp,tttemp,qvtemp,qsatv
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1059): warning #8889: Explicit interface or EXTERNAL declaration is required. [NRMTQW]
call nrmtqw(qvtemp,qgtemp,qrtemp,qstemp,qadjw,qctemp,tttemp
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1072): warning #8889: Explicit interface or EXTERNAL declaration is required. [QSATVI]
call qsatvi(tttemp,pr,qsatv,qsati,lice,mkk)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1074): warning #8889: Explicit interface or EXTERNAL declaration is required. [SLOPE]
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1187): warning #8889: Explicit interface or EXTERNAL declaration is required. [QSATVI]
call qsatvi(tdum,pr,qvsdum,qsidum,lice,mkk)
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1188): warning #8889: Explicit interface or EXTERNAL declaration is required. [QTADJ]
call qtadj(tdum,qdum,pr,qvsdum,qsidum,qadj,tadj
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1197): warning #8889: Explicit interface or EXTERNAL declaration is required. [QTADJ]
call qtadj(tttemp,qvtemp,pr,qsatv,qsati,qadj,tadj,heatlv
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1205): warning #8889: Explicit interface or EXTERNAL declaration is required. [CONICE]
call conice(nitemp,nuci,tttemp,qvtemp,qsatv,qsati,qctemp,qitemp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1226): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA15]
call eqa15(pint,tttemp,qvtemp,qsati,qadj,rbar2d,nitemp,tice
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1235): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA18]
call eqa18(pdepi,qvtemp,qitemp,qsati,qadj,tttemp,rbar2d,nitemp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1244): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA26]
call eqa26(psdep,qvtemp,qstemp,qsati,qadj,terma,appbpp,tttemp
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1252): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA17G]
if(lgrpl)call eqa17g(pgdep,qgtemp,tttemp,qvtemp,qsati,xa
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1261): warning #8889: Explicit interface or EXTERNAL declaration is required. [NRMTQI]
call nrmtqi(qvtemp,qitemp,qgtemp,qstemp,qadj,tttemp,pgdep
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1274): warning #8889: Explicit interface or EXTERNAL declaration is required. [SLOPE]
call slope(sfrain,sfraincm,sfsnow,sfgraup,qrtemp,qstemp,qgtemp
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1285): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA7]
call eqa7(praut,qctemp,rbar2d,nctemp,praut1,praut2,pi
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1293): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA9]
call eqa9(pracw,qctemp,qrtemp,pterm4,sfrain,xa,rbar2d,nctemp
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1390): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQG]
call tgqg(fallg,qgtemp,sfgraup,pterm4,pcut,abar,bgrp,mkk)
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1392): warning #8889: Explicit interface or EXTERNAL declaration is required. [TGQS]
call tgqs(falls,qstemp,sfsnow,pterm4,pcut,aprpr,bsnow,mkk)
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1400): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA19]
call eqa19(pconv,qitemp,rbar2d,nitemp,tttemp,pcut,cimass
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1408): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA10G]
if(lgrpl)call eqa10g(pwacs,qstemp,qctemp,rbar2d,tttemp
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1417): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA21]
call eqa21(psaci,qitemp,qstemp,sfsnow,termb
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1425): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA5G]
if(lgrpl)call eqa5g(praci,qitemp,qrtemp,tttemp,iwx1,gm3,gm4
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1434): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA12G]
if(lgrpl)call eqa12g(pgaci,qitemp,qgtemp,tttemp,sfgraup,xa,iwx1
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1442): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA14G]
if(lgrpl)call eqa14g(pgacs,qstemp,qgtemp,tttemp,rbar2d
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1451): warning #8889: Explicit interface or EXTERNAL declaration is required. [EQA20G]
if(lgrpl)call eqa20g(pgshr,pgacr,pgacw,tttemp,rbar2d,tzero
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(1461): warning #8889: Explicit interface or EXTERNAL declaration is required. [NRMCOL]
call nrmcol(tttemp,qctemp,qitemp,qgtemp,qrtemp,qstemp,pconv,pgaci
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(2): remark #7712: This variable has not been used. [P3]
1 (cond,p3,qc3,qi3,qr3,qg3,qs3,qv3,th3,w3,pr3d
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(2): remark #7712: This variable has not been used. [W3]
1 (cond,p3,qc3,qi3,qr3,qg3,qs3,qv3,th3,w3,pr3d
---------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(3): remark #7712: This variable has not been used. [WTM]
2 ,qsatv3d,temp3d,qsati3d,th2t3d,wtm,exbm,rbm
---------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(3): remark #7712: This variable has not been used. [EXBM]
2 ,qsatv3d,temp3d,qsati3d,th2t3d,wtm,exbm,rbm
-------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(5): remark #7712: This variable has not been used. [TIMEA]
4 ,pcut,p00,r,rvap,sloper,slopes,slopeg,timea,lice
----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(6): remark #7712: This variable has not been used. [NNE]
5 ,nne,kk,i1d,j1d,ary1d,i1dflg,n1d,maxpt1d,maxvr1d
---------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(9): remark #7712: This variable has not been used. [CPOR]
8 ,cbeta,cnzero,cimass,cpor,cw,difvap,erc,esi,eic
-----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(9): remark #7712: This variable has not been used. [DIFVAP]
8 ,cbeta,cnzero,cimass,cpor,cw,difvap,erc,esi,eic
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(10): remark #7712: This variable has not been used. [MW]
9 ,eri,egc,esc,esr,egi,egr,egs,mw,pi,praut1,praut2
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBP3]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
---------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBOV2]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
---------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(13): remark #7712: This variable has not been used. [GMBOV2G]
3 ,gm7,gm8,gm9,gmbp3,gmbov2,gmbov2g,bgrp,ex1,ex2
----------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PCOND3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
---------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PSMLTI3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PSACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PGACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
-------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PIACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PCHOMO3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
---------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PRAUT3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
-----------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(22): remark #7712: This variable has not been used. [PRACW3]
7 ,pcond3,psmlti3,psacw3,pgacw3,piacw3,pchomo3,praut3,pracw3
------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PDEPI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
---------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PINT3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PGDEP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PCONV3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
-----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PSACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PGACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
-------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PRACI3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
--------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PREVP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
---------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(23): remark #7712: This variable has not been used. [PSDEP3]
8 ,pdepi3,pint3,pgdep3,pconv3,psaci3,pgaci3,praci3,prevp3,psdep3
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PMLTGE3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
---------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGMLT3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PSMLT3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGACRM3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGACWM3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
---------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PRACS3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
-----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(24): remark #7712: This variable has not been used. [PGSHR3]
9 ,pmltge3,pgmlt3,psmlt3,pgacrm3,pgacwm3,pracs3,pgshr3
------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PGACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
---------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PSACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PIACR3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
-----------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PRHOMO3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PGACS3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PMLTSE3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
---------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(27): remark #7712: This variable has not been used. [PWACS3]
1 ,pgacr3,psacr3,piacr3,prhomo3,pgacs3,pmltse3,pwacs3
-----------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(242): remark #7712: This variable has not been used. [IC]
integer ic
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(247): remark #7712: This variable has not been used. [IP]
integer ip
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(249): remark #7712: This variable has not been used. [JP]
integer jp
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(251): remark #7712: This variable has not been used. [M]
integer m
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(253): remark #7712: This variable has not been used. [N]
integer n
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(256): remark #7712: This variable has not been used. [NP]
integer np
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(257): remark #7712: This variable has not been used. [NPTS]
integer npts
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(331): remark #7712: This variable has not been used. [SAT]
real sat
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(348): remark #7712: This variable has not been used. [WGT]
real wgt (len)
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/adjtq.F(356): remark #7712: This variable has not been used. [TMP1]
real tmp1 (len)
----------------^
[ 77%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/conice.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/conice.F(63): remark #7712: This variable has not been used. [CNN]
real cnn (len)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/conice.F(70): remark #7712: This variable has not been used. [DT]
real dt
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/conice.F(73): remark #7712: This variable has not been used. [F3]
real f3
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/conice.F(75): remark #7712: This variable has not been used. [FTP]
real ftp
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/conice.F(82): remark #7712: This variable has not been used. [MC]
real mc
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/conice.F(83): remark #7712: This variable has not been used. [N12]
real n12
-----------^
[ 77%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa10g.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa10g.F(53): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,gm6pb)
-----------^
[ 77%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa11g.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa11g.F(52): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,gm3pb)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa11g.F(1): remark #7712: This variable has not been used. [TT]
subroutine eqa11g(pgacw,qg,qc,tt,sg,sggi,icomp,pterm4,tzero
------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa11g.F(1): remark #7712: This variable has not been used. [TZERO]
subroutine eqa11g(pgacw,qg,qc,tt,sg,sggi,icomp,pterm4,tzero
------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa11g.F(16): remark #7712: This variable has not been used. [CMAX]
real cmax
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa11g.F(17): remark #7712: This variable has not been used. [CMIN]
real cmin
-----------^
[ 77%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa12.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa12.F(35): remark #7712: This variable has not been used. [TWODT]
real twodt
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa12.F(55): remark #7712: This variable has not been used. [QCOND]
real qcond
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa12.F(56): remark #7712: This variable has not been used. [QEVAP]
real qevap
-----------^
[ 78%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa12g.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa12g.F(50): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,gm3pb)
-----------^
[ 78%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa13g.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa13g.F(1): remark #7712: This variable has not been used. [TT]
subroutine eqa13g(pgacr,qr,qg,tt,rho,fallr,fallg
------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa13g.F(4): remark #7712: This variable has not been used. [TZERO]
2 ,delt,pcut,tzero,len)
------------------------^
[ 78%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa14g.F.o[0m
[ 78%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa15.F.o[0m
[ 78%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa17g.F.o[0m
[ 79%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa18.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa18.F(2): remark #7712: This variable has not been used. [J]
1 ,appbpp,tice,delt,pcut,j,icon,len)
---------------------------------------------^
[ 79%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa18g.F.o[0m
[ 79%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa19.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa19.F(1): remark #7712: This variable has not been used. [TT]
subroutine eqa19(pconv,qi,rho,conci,tt,pcut,cimass,delt,len)
------------------------------------------^
[ 79%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa19g.F.o[0m
[ 79%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa20g.F.o[0m
[ 80%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa21.F.o[0m
[ 80%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa21g.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa21g.F(1): remark #7712: This variable has not been used. [RHO]
subroutine eqa21g(pgacrm,pgacr,tt,rho,qg,tzero
----------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa21g.F(29): remark #7712: This variable has not been used. [NPTS]
integer npts
--------------^
[ 80%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa22.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa22.F(1): remark #7712: This variable has not been used. [TZERO]
subroutine eqa22(psacw,qc,qs,tt,termb,esc,pcut,delt,tzero,len)
----------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa22.F(13): remark #7712: This variable has not been used. [IFLAG]
integer iflag
--------------^
[ 80%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa22g.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa22g.F(1): remark #7712: This variable has not been used. [RHO]
subroutine eqa22g(pgacwm,pgacw,tt,rho,qg,tzero
----------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa22g.F(29): remark #7712: This variable has not been used. [NPTS]
integer npts
--------------^
[ 81%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa25.F.o[0m
[ 81%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa26.F.o[0m
[ 81%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa27.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa27.F(2): remark #7712: This variable has not been used. [J]
1 ,snzero,tzero,pcut,delt,j,len)
----------------------------------------------^
[ 81%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa27r.F.o[0m
[ 81%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa28.F.o[0m
[ 82%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa5g.F.o[0m
[ 82%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa6.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa6.F(1): remark #7712: This variable has not been used. [TT]
subroutine eqa6(pcond,tt,qadj,qv,qc,qsatv,qsati,pp,w1,w2
----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa6.F(1): remark #7712: This variable has not been used. [QSATI]
subroutine eqa6(pcond,tt,qadj,qv,qc,qsatv,qsati,pp,w1,w2
------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa6.F(1): remark #7712: This variable has not been used. [PP]
subroutine eqa6(pcond,tt,qadj,qv,qc,qsatv,qsati,pp,w1,w2
------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa6.F(2): remark #7712: This variable has not been used. [HEATLV]
1 ,iwx1,heatlv,cp,delt,pcut,j,len)
---------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa6.F(2): remark #7712: This variable has not been used. [CP]
1 ,iwx1,heatlv,cp,delt,pcut,j,len)
----------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa6.F(2): remark #7712: This variable has not been used. [J]
1 ,iwx1,heatlv,cp,delt,pcut,j,len)
-----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa6.F(39): remark #7712: This variable has not been used. [ITER]
integer iter
--------------^
[ 82%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa7.F.o[0m
[ 82%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa7g.F.o[0m
[ 82%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa8g.F.o[0m
[ 83%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa9.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa9.F(1): remark #7712: This variable has not been used. [RHO]
subroutine eqa9(pracw,qc,qr,pterm4,sr,sri,rho,nc,icomp,pi,erc
------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa9.F(36): remark #7712: This variable has not been used. [RVC]
real rvc
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/eqa9.F(37): remark #7712: This variable has not been used. [RVCOF]
real rvcof
-----------^
[ 83%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa9g.F.o[0m
[ 83%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esati.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esati.F(47): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESAT_NEW]
call esat_new(t,w1,m,l_ice)
-------------^
[ 83%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esat_new.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(51): remark #7712: This variable has not been used. [WICE]
real ESH2O,WICE,WH2O
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(51): remark #7712: This variable has not been used. [WH2O]
real ESH2O,WICE,WH2O
----------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(52): remark #7712: This variable has not been used. [ESBLD]
real ESICE,ESBLD
-----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(55): remark #7712: This variable has not been used. [VABLD]
real VABLD
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(58): remark #7712: This variable has not been used. [XLBLD]
real XLBLD
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(62): remark #7712: This variable has not been used. [II]
integer ii
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(63): remark #7712: This variable has not been used. [J]
integer j
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(64): remark #7712: This variable has not been used. [VPS]
real qcon,rq,vps,var
-------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(64): remark #7712: This variable has not been used. [VAR]
real qcon,rq,vps,var
-----------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(66): remark #7712: This variable has not been used. [QQQ]
real t1,qqq,tqs,temc
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(66): remark #7712: This variable has not been used. [TQS]
real t1,qqq,tqs,temc
------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esat_new.F(74): remark #7712: This variable has not been used. [L_XL]
logical l_xl
--------------^
[ 84%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esatv.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/esatv.F(47): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESAT_NEW]
call esat_new(t,w1,m,l_ice)
-------------^
[ 84%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/frzh.F.o[0m
[ 84%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/gamma.F.o[0m
[ 84%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmcol.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(1): remark #7712: This variable has not been used. [TTTEMP]
subroutine nrmcol(tttemp,qctemp,qitemp,qgtemp,qrtemp,qstemp
-------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(3): remark #7712: This variable has not been used. [TT]
2 ,rho,nc,nr,ncn,pcut,twodt,lice,lgrpl,tt,rvc
-------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [ARY1D]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
-------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [I1DFLG]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
--------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [I1D]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
---------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [J1D]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
-------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(4): remark #7712: This variable has not been used. [J]
3 ,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg,i1d,j1d,j
-----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(5): remark #7712: This variable has not been used. [ICOMP]
4 ,icomp,ldrizzle,ni,m,len)
-------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(5): remark #7712: This variable has not been used. [NI]
4 ,icomp,ldrizzle,ni,m,len)
----------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmcol.F(59): remark #7712: This variable has not been used. [K]
integer k
---------------^
[ 84%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmtqi.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(3): remark #7712: This variable has not been used. [LGRPL]
2 ,lsocp,tzero,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d
-------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(3): remark #7712: This variable has not been used. [ARY1D]
2 ,lsocp,tzero,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [I1DFLG]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
-------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [I1D]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
--------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [J1D]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [J]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
----------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [ICOMP]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [TH2T]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(4): remark #7712: This variable has not been used. [CONCI]
3 ,i1dflg,i1d,j1d,j,icomp,th2t,conci,m,len)
-----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(12): remark #7712: This variable has not been used. [IP]
integer ip
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(14): remark #7712: This variable has not been used. [JP]
integer jp
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(15): remark #7712: This variable has not been used. [KK]
integer kk
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(21): remark #7712: This variable has not been used. [NP]
integer np
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(52): remark #7712: This variable has not been used. [K]
integer k
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqi.F(56): remark #7712: This variable has not been used. [TP3]
real tp3
------------^
[ 85%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmtqw.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(3): remark #7712: This variable has not been used. [ARY1D]
2 ,lvocp,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg
-------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(3): remark #7712: This variable has not been used. [I1DFLG]
2 ,lvocp,lgrpl,ary1d,maxpt1d,kmax,maxvr1d,n1d,i1dflg
--------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [I1D]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [J1D]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-----------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [J]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
---------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [TH2T]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [HEATLV]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [CP]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
--------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [RVAP]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
-----------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(6): remark #7712: This variable has not been used. [QSATV]
3 ,i1d,j1d,j,ldrizzle,th2t,heatlv,cp,rvap,qsatv,len
----------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(18): remark #7712: This variable has not been used. [KK]
integer kk
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(21): remark #7712: This variable has not been used. [M]
integer m
---------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/nrmtqw.F(61): remark #7712: This variable has not been used. [K]
integer k
---------------^
[ 85%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/qsatvi.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/qsatvi.F(31): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESATV]
call esatv(t,qvs,len)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/qsatvi.F(38): warning #8889: Explicit interface or EXTERNAL declaration is required. [ESATI]
call esati(t,qvi,len)
-------------^
[ 85%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/qtadj.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/qtadj.F(1): remark #7712: This variable has not been used. [PR]
subroutine qtadj(tt,qv,pr,qsatv,qsati,qadj,tadj,heatlv
-----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/qtadj.F(2): remark #7712: This variable has not been used. [LICE]
1 ,heatls,cp,rvap,tzero,lice,iflag,pcut,len)
------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/qtadj.F(12): remark #7712: This variable has not been used. [IMPLFLG]
integer implflg
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/qtadj.F(14): remark #7712: This variable has not been used. [N]
integer n
--------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/qtadj.F(22): remark #7712: This variable has not been used. [QSAT]
real qsat
-----------^
[ 85%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/slope.F.o[0m
[ 86%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqg.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqg.F(40): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,tvs1)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqg.F(30): remark #7712: This variable has not been used. [PFACT]
real pfact
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqg.F(32): remark #7712: This variable has not been used. [X6]
real x6
-----------^
[ 86%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqi.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqi.F(1): remark #7712: This variable has not been used. [CIMASS]
subroutine tgqi(fallv,qi,rbm,pr,conci,pcut,p00,cimass,dmax,len)
-----------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqi.F(33): remark #7712: This variable has not been used. [FALSPD]
real falspd
-----------^
[ 86%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqr.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqr.F(31): remark #7712: This variable has not been used. [K]
integer k
--------------^
[ 86%] [32mBuilding Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqs.F.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqs.F(45): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,tvs1)
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqs.F(31): remark #7712: This variable has not been used. [PFACT]
real pfact
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/COAMPS_microphys/tgqs.F(33): remark #7712: This variable has not been used. [X6]
real x6
-----------^
[ 86%] [32m[1mLinking Fortran static library libcoamps_lib.a[0m
[ 86%] Built target coamps_lib
[35m[1mScanning dependencies of target scm_activation_lib[0m
[ 86%] [32mBuilding Fortran object src/Microphys/SCM_Activation/CMakeFiles/scm_activation_lib.dir/aer_ccn_act_k.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/SCM_Activation/aer_ccn_act_k.F90(129): remark #7712: This variable has not been used. [T1]
subroutine aer_ccn_act_k (T1, P1, Updraft1, TotalMass, tym, &
--------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/SCM_Activation/aer_ccn_act_k.F90(129): remark #7712: This variable has not been used. [P1]
subroutine aer_ccn_act_k (T1, P1, Updraft1, TotalMass, tym, &
------------------------------^
[ 86%] [32m[1mLinking Fortran static library libscm_activation_lib.a[0m
[ 86%] Built target scm_activation_lib
[35m[1mScanning dependencies of target morrison_microphys_lib[0m
[ 86%] [32mBuilding Fortran object src/Microphys/Morrison_microphys/CMakeFiles/morrison_microphys_lib.dir/module_mp_graupel.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6326): remark #7712: This variable has not been used. [I]
INTEGER:: i, k, k_0
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(749): remark #7712: This variable has not been used. [ITIMESTEP]
SUBROUTINE MP_GRAUPEL(ITIMESTEP, &
----------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(750): remark #7712: This variable has not been used. [TKE]
TH, QV, QC, QR, QI, QS, QG, NI, NC, NS, NR, NG, TKE, NCTEND, &
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [RHO]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [HT]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IMS]
IMS,IME, JMS,JME, KMS,KME,&
------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IME]
IMS,IME, JMS,JME, KMS,KME,&
----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JMS]
IMS,IME, JMS,JME, KMS,KME,&
---------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JME]
IMS,IME, JMS,JME, KMS,KME,&
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
---------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QGSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
----------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QRSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-----------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QNISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
---------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QCSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1231): remark #7712: This variable has not been used. [PCCN]
REAL, DIMENSION(KMS:KME) :: PCCN ! CHANGE Q DROPLET ACTIVATION
----------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1316): remark #7712: This variable has not been used. [COFFI]
REAL COFFI ! ICE AUTOCONVERSION PARAMETER
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1325): remark #7712: This variable has not been used. [RHO2]
REAL FALTNDR,FALTNDI,FALTNDNI,RHO2
------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5435): remark #7712: This variable has not been used. [DUM]
REAL DUM
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1350): remark #7712: This variable has not been used. [DUMQSI]
REAL DUM,DUM1,DUM2,DUMT,DUMQV,DUMQSS,DUMQSI,DUMS,TMPNUM
------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1382): remark #7712: This variable has not been used. [CT]
REAL CT ! DROPLET ACTIVATION PARAMETER
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1383): remark #7712: This variable has not been used. [TEMP1]
REAL TEMP1 ! DUMMY TEMPERATURE
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1384): remark #7712: This variable has not been used. [SAT1]
REAL SAT1 ! DUMMY SATURATION
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1386): remark #7712: This variable has not been used. [KEL]
REAL KEL ! KELVIN PARAMETER
-------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [CRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [KRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMQI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMNI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DC0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DS0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
--------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DG0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1394): remark #7712: This variable has not been used. [DUMQR]
REAL DUMQC,DUMQR,RATIO,SUM_DEP,FUDGEF
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1397): remark #7712: This variable has not been used. [WEF]
REAL WEF
----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [ANUC]
REAL ANUC,BNUC
-----------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [BNUC]
REAL ANUC,BNUC
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5967): remark #7712: This variable has not been used. [LAMBDA]
meltratio_outside, m_w, m_i, lambda, C_back, &
--------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5904): remark #7712: This variable has not been used. [SIGMA]
REAL(8):: alpha,lambdas,sigma,nenner
------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5981): remark #7712: This variable has not been used. [XW_A]
REAL(8):: D_large, D_g, rhog, x_w, xw_a, fm, fmgrenz, &
-----------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [II]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [JJ]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
----------------------------------------^
[ 87%] [32m[1mLinking Fortran static library libmorrison_microphys_lib.a[0m
[ 87%] Built target morrison_microphys_lib
[35m[1mScanning dependencies of target microphys_lib[0m
[ 88%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/parameters_microphys.F90.o[0m
[ 88%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/advance_microphys_module.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/KK_microphys_module.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/KK_microphys_module.F90(43): remark #7712: This variable has not been used. [GR]
subroutine KK_local_microphys( gr, dt, nzt, & ! In
---------------------------------^
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/coamps_microphys_driver_module.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/silhs_category_variance_module.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/estimate_scm_microphys_module.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/gfdl_activation.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/ice_dfsn_module.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/lh_microphys_driver_module.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/morrison_microphys_module.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/Microphys/morrison_microphys_module.F90(20): remark #7712: This variable has not been used. [SATURATION_FORMULA]
saturation_formula, &
---------------^
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_driver.F90.o[0m
[ 89%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_init_cleanup.F90.o[0m
[ 90%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/mixed_moment_PDF_integrals.F90.o[0m
[ 90%] [32mBuilding Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/pdf_hydromet_microphys_wrapper.F90.o[0m
[ 90%] [32m[1mLinking Fortran static library libmicrophys_lib.a[0m
[ 90%] Built target microphys_lib
[35m[1mScanning dependencies of target clubb_driver_lib[0m
[ 90%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/generalized_grid_test.F90.o[0m
[ 90%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/hydrostatic_module.F90.o[0m
[ 90%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/extrapolation.F90.o[0m
[ 90%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_grads.F90.o[0m
[ 90%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_netcdf.F90.o[0m
[ 91%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/stat_file_utils.F90.o[0m
[ 92%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_fields.F90.o[0m
[ 92%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/soil_vegetation.F90.o[0m
[ 92%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_interpret.F90.o[0m
[ 92%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/sounding.F90.o[0m
[ 93%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_lib.dir/clubb_driver.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver.F90(4150): remark #7712: This variable has not been used. [CLUBB_PARAMS]
subroutine clean_up_clubb(ngrdcol, clubb_params, err_info)
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver.F90(4150): remark #7712: This variable has not been used. [ERR_INFO]
subroutine clean_up_clubb(ngrdcol, clubb_params, err_info)
---------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver.F90(2632): remark #7712: This variable has not been used. [ERR_INFO]
subroutine set_case_initial_conditions(ngrdcol, clubb_params, err_info)
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver.F90(4607): remark #7712: This variable has not been used. [GRID_ADAPT_IN_TIME_METHOD]
grid_adapt_in_time_method, &
----------------^
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver.F90(4606): remark #7712: This variable has not been used. [L_ADD_DYCORE_GRID]
l_add_dycore_grid, &
----------------^
[ 93%] [32m[1mLinking Fortran static library libclubb_driver_lib.a[0m
[ 93%] Built target clubb_driver_lib
[35m[1mScanning dependencies of target clubb_standalone[0m
[ 94%] [32mBuilding Fortran object src/CMakeFiles/clubb_standalone.dir/clubb_standalone.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_standalone.F90(66): remark #7712: This variable has not been used. [ARG]
character(len=10) :: arg
-----------------------^
[ 94%] [32m[1mLinking Fortran executable clubb_standalone[0m
[ 94%] Built target clubb_standalone
[35m[1mScanning dependencies of target clubb_thread_test[0m
[ 94%] [32mBuilding Fortran object src/CMakeFiles/clubb_thread_test.dir/clubb_thread_test.F90.o[0m
[ 94%] [32m[1mLinking Fortran executable clubb_thread_test[0m
[ 94%] Built target clubb_thread_test
[35m[1mScanning dependencies of target numerical_recipes_lib[0m
[ 95%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/enhanced_simann.F90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrtype.f90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nr.f90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrutil.f90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/quicksort.F90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran_state.f90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amebsa.f90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amoeba.f90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_s.f90.o[0m
[ 96%] [32mBuilding Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_v.f90.o[0m
[ 96%] [32m[1mLinking Fortran static library libnumerical_recipes_lib.a[0m
[ 96%] Built target numerical_recipes_lib
[35m[1mScanning dependencies of target clubb_tuner[0m
[ 96%] [32mBuilding Fortran object src/CMakeFiles/clubb_tuner.dir/error.F90.o[0m
[ 97%] [32mBuilding Fortran object src/CMakeFiles/clubb_tuner.dir/clubb_tuner.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_tuner.F90(86): warning #8889: Explicit interface or EXTERNAL declaration is required. [PARAM_LOOPS_DRIVER]
call param_loops_driver( )
---------------^
[ 97%] [32m[1mLinking Fortran executable clubb_tuner[0m
[ 97%] Built target clubb_tuner
[35m[1mScanning dependencies of target G_unit_test_lib[0m
[ 97%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/KK_integrals_tests.F90.o[0m
[ 97%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Nc_Ncn_test.F90.o[0m
[ 97%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/corr_cholesky_mtx_tests.F90.o[0m
[ 97%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/hole_filling_tests.F90.o[0m
[ 97%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/mu_sigma_hm_tests.F90.o[0m
[ 97%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/pdf_parameter_tests.F90.o[0m
[ 98%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/read_corr_mtx_test.F90.o[0m
[ 99%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/rev_direction_grid_test.F90.o[0m
[ 99%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/silhs_category_test.F90.o[0m
[ 99%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_heaviside_tests.F90.o[0m
[ 99%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_min_max_tests.F90.o[0m
[ 99%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90.o[0m
[100%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/tuner_tests.F90.o[0m
[100%] [32mBuilding Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/w_up_in_cloud_tests.F90.o[0m
[100%] [32m[1mLinking Fortran static library libG_unit_test_lib.a[0m
[100%] Built target G_unit_test_lib
[35m[1mScanning dependencies of target G_unit_tests[0m
[100%] [32mBuilding Fortran object src/CMakeFiles/G_unit_tests.dir/G_unit_tests.F90.o[0m
[100%] [32m[1mLinking Fortran executable G_unit_tests[0m
[100%] Built target G_unit_tests
[35m[1mScanning dependencies of target clubb_driver_test[0m
[100%] [32mBuilding Fortran object src/CMakeFiles/clubb_driver_test.dir/clubb_driver_test.F90.o[0m
/home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver_test.F90(74): remark #7712: This variable has not been used. [ARG]
character(len=10) :: arg
-----------------------^
[100%] [32m[1mLinking Fortran executable clubb_driver_test[0m
[100%] Built target clubb_driver_test
[36mInstall the project...[0m
-- Install configuration: "Release"
-- Installing: /home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/libclubb_driver_lib.a
-- Installing: /home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_tuner
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_tuner" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/G_unit_tests
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/G_unit_tests" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_thread_test
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_thread_test" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_standalone
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_standalone" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_driver_test
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_output_matching/install/ifx/clubb_driver_test" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
Setting CLUBB installation dir: /home/jenkins/workspace/clubb_cmake_output_matching/install/ifx
Using inferred toolchain file: /home/jenkins/workspace/clubb_cmake_output_matching/cmake/toolchains/linux_x86_64_ifx.cmake
about to cmnake /home/jenkins/workspace/clubb_cmake_output_matching/build/ifx
Running CMake configure...
check_for_missing_threadprivate.py has begun.
File /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/error_code.F90 failed:
Missing threadprivate for:
clubb_debug_level
File /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/sponge_layer_damping.F90 failed:
Missing threadprivate for:
up2_vp2_sponge_damp_settings
wp2_sponge_damp_profile
uv_sponge_damp_profile
uv_sponge_damp_settings
wp2_sponge_damp_settings
thlm_sponge_damp_profile
rtm_sponge_damp_settings
up2_vp2_sponge_damp_profile
wp3_sponge_damp_profile
rtm_sponge_damp_profile
wp3_sponge_damp_settings
thlm_sponge_damp_settings
File /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/corr_varnce_module.F90 failed:
Missing threadprivate for:
corr_array_n_cloud_def
corr_array_n_below_def
[91mcheck_for_missing_threadprivate.py did not pass.[0m
[91mfailedFiles = ['/home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/error_code.F90', '/home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/sponge_layer_damping.F90', '/home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/corr_varnce_module.F90'][0m
[91m===============================================================
[91mTHREADPRIVATE CHECK FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_cmake_output_matching/build/ifx/cmake_build_output.txt
[91m===============================================================[0m
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/soil_vegetation.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 174 : 103 chars : call stat_update_var_pt( stats_metadata%isfc_soil_T_in_K, 1, sfc_soil_T_in_K(i), stats_sfc(i) )
line 175 : 105 chars : call stat_update_var_pt( stats_metadata%ideep_soil_T_in_K, 1, deep_soil_T_in_K(i), stats_sfc(i) )
line 212 : 101 chars : call stat_update_var_pt( stats_metadata%isoil_heat_flux, 1, soil_heat_flux(i), & ! intent(in)
line 213 : 104 chars : stats_sfc(i) ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 111 : 107 chars : write(fstderr, *) "This section ensures that everything allocated in init_clubb_case will be deallocated"
line 112 : 102 chars : write(fstderr, *) "in clean_up_clubb. This may cause a runtime error if there is a mismatch between"
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/generalized_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 3: module generalized_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/generalized_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 908 : 106 chars : pdf_params_zm_flip%ice_supersat_frac_1(i,:) = flip( pdf_params_zm%ice_supersat_frac_1(i,:), nzm )
line 909 : 106 chars : pdf_params_zm_flip%ice_supersat_frac_2(i,:) = flip( pdf_params_zm%ice_supersat_frac_2(i,:), nzm )
line 911 : 117 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1080 : 101 chars : rtm_ref_flip, thlm_ref_flip, um_ref_flip, vm_ref_flip, ug_flip, vg_flip, & ! Intent(in)
line 1094 : 111 chars : um_flip, vm_flip, upwp_flip, vpwp_flip, up2_flip, vp2_flip, up3_flip, vp3_flip, & ! Intent(inout)
line 1096 : 111 chars : wp2_flip, wp3_flip, rtp2_flip, rtp3_flip, thlp2_flip, thlp3_flip, rtpthlp_flip, & ! Intent(inout)
line 1102 : 109 chars : wp2rtp_flip, wp2thlp_flip, uprcp_flip, vprcp_flip, rc_coef_zm_flip, wp4_flip, & ! intent(inout)
line 1103 : 105 chars : wpup2_flip, wpvp2_flip, wp2up2_flip, wp2vp2_flip, ice_supersat_frac_flip, & ! intent(inout)
line 1587 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1614 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2up_implicit, nzt, ngrdcol, &
line 1618 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2up_explicit, nzt, ngrdcol, &
line 1622 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2vp_implicit, nzt, ngrdcol, &
line 1626 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2vp_explicit, nzt, ngrdcol, &
line 1660 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpup2_implicit, nzt, ngrdcol, &
line 1664 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpup2_explicit, nzt, ngrdcol, &
line 1668 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpvp2_implicit, nzt, ngrdcol, &
line 1672 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpvp2_explicit, nzt, ngrdcol, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_driver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 199 : 110 chars : l_modify_ic_with_cubic_int, & ! Flag for interpolating the sounding profile with Steffen's monotone cubic
line 200 : 110 chars : ! method to obtain smoother initial condition profile, which is found to be
line 201 : 111 chars : ! beneficial to achive a better numerical solution convergence. If this flag
line 202 : 118 chars : ! is turned off, the initial conditions will be generated with linear interpolation.
line 203 : 111 chars : ! This is done on a case-by-case basis, since using the monotone cubic method
line 204 : 109 chars : ! requires a special sounding.in file with many additional sounding levels.
line 205 : 109 chars : l_modify_bc_for_cnvg_test, & ! Flag to activate modifications on boundary condition for convergence test
line 737 : 101 chars : !$omp sens_ht, latent_ht, lmin, vert_decorr_coef, deep_soil_T_in_K, sfc_soil_T_in_K, veg_T_in_K, &
line 753 : 102 chars : !$omp rtp2_mc, thlp2_mc, rtpthlp_mc, Ncm_mc, Ncm, Nccnm, em, tau_zm, tau_zt, Kh_zt, Kh_zm, rfrzm, &
line 754 : 105 chars : !$omp rrm, Nrm, Nc_in_cloud, wpNcp, radht, Frad, Frad_SW_up, Frad_LW_up, Frad_SW_down, Frad_LW_down, &
line 755 : 102 chars : !$omp wpsclrp_sfc, wpedsclrp_sfc, sclrm, wpsclrp, sclrp2, sclrp3, sclrprtp, sclrpthlp, sclrpthvp, &
line 800 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 1016 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 1690 : 102 chars : open(unit=iunit_grid_adaptation, file=fname_grid_adaptation, status='replace', action='write')
line 2002 : 105 chars : allocate( um_ref(ngrdcol, gr%nzt) ) ! Reference u wind for nudging; Michael Falk, 17 Oct 2007
line 2003 : 105 chars : allocate( vm_ref(ngrdcol, gr%nzt) ) ! Reference v wind for nudging; Michael Falk, 17 Oct 2007
line 2493 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 2524 : 106 chars : ! Similar call to above, checking parameter values, but because we've placed this in "init_clubb_case"
line 2532 : 116 chars : write(fstderr, *) "Fatal error calling check_clubb_settings_api and/or check_parameters_api in clubb_driver"
line 2575 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 2587 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 2588 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 2591 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 2593 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 2599 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 2600 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 2601 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 2602 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 2603 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 2604 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 2605 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 2606 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 2607 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 2608 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 2723 : 103 chars : invrs_rho_ds_zt(i,k) = invrs_rho_ds_zt_init(k) ! inv. dry, static density: t-levs
line 2729 : 103 chars : um_pert(i,k) = zero ! Variables used to track perturbed version of winds.
line 2731 : 105 chars : wm_zt(i,k) = wm_zt_init(k) ! Imposed large scale w - Thermodynamic levels
line 2924 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 3130 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 3278 : 103 chars : um(i,:), vm(i,:), rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), &
line 3616 : 111 chars : !$acc X_nl_all_levs, X_mixt_comp_all_levs, lh_sample_point_weights, mu_x_1_n, mu_x_2_n, &
line 3618 : 104 chars : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped, &
line 3622 : 116 chars : !$acc pdf_params%cloud_frac_1, pdf_params%cloud_frac_2, pdf_params%cthl_1, pdf_params%cthl_2, &
line 3623 : 112 chars : !$acc pdf_params%crt_1, pdf_params%crt_2, pdf_params%stdev_chi_1, pdf_params%stdev_chi_2, &
line 3639 : 102 chars : wp2_zt = zm2zt_api( gr%nzm, gr%nzt, ngrdcol, gr, wp2, w_tol_sqd ) ! Positive definite quantity
line 3645 : 109 chars : thlm(i,:), p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), rtm(i,:), &! In
line 3646 : 109 chars : rcm(i,:), cloud_frac(i,:), wm_zt(i,:), wm_zm(i,:), wp2_zt(i,:), & ! In
line 3647 : 106 chars : hydromet(i,:,:), Nc_in_cloud(i,:), & ! In
line 3663 : 103 chars : stats_zt(i), stats_zm(i), & ! Inout
line 3664 : 103 chars : stats_sfc(i), stats_lh_zt(i), & ! Inout
line 3665 : 102 chars : Nccnm(i,:), & ! Inout
line 3666 : 117 chars : hydromet_mc(i,:,:), Ncm_mc(i,:), rcm_mc(i,:), rvm_mc(i,:), & ! Out
line 3667 : 107 chars : thlm_mc(i,:), hydromet_vel_zt(i,:,:), & ! Out
line 3668 : 102 chars : hydromet_vel_covar_zt_impc(i,:,:), & ! Out
line 3669 : 102 chars : hydromet_vel_covar_zt_expc(i,:,:), & ! Out
line 3670 : 110 chars : wprtp_mc(i,:), wpthlp_mc(i,:), rtp2_mc(i,:), & ! Out
line 3671 : 105 chars : thlp2_mc(i,:), rtpthlp_mc(i,:) ) ! Out
line 3695 : 103 chars : stats_zt(i), stats_zm(i), stats_sfc(i), & ! Inout
line 3696 : 103 chars : hydromet(i,:,:), hydromet_vel_zt(i,:,:), hydrometp2(i,:,:), & ! Inout
line 3697 : 103 chars : K_hm(i,:,:), Ncm(i,:), Nc_in_cloud(i,:), rvm_mc(i,:), & ! Inout
line 3698 : 103 chars : thlm_mc(i,:), err_info, & ! Inout
line 3699 : 101 chars : wphydrometp(i,:,:), wpNcp(i,:) ) ! Out
line 3708 : 106 chars : !$acc update device( rcm_mc, rvm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3766 : 104 chars : !$acc update host( rvm_mc, rcm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3772 : 105 chars : call stat_update_var( stats_metadata%irtm_mc, rvm_mc(i,:)+rcm_mc(i,:), stats_zt(i) ) ! kg/kg/s
line 3774 : 106 chars : call stat_update_var( stats_metadata%iwprtp_mc, wprtp_mc(i,:), stats_zm(i) ) ! m*(kg/kg)/s^2
line 3776 : 104 chars : call stat_update_var( stats_metadata%irtp2_mc, rtp2_mc(i,:), stats_zm(i) ) ! (kg/kg)^2/s
line 3778 : 104 chars : call stat_update_var( stats_metadata%irtpthlp_mc, rtpthlp_mc(i,:), stats_zm(i) ) ! K*(kg/kg)/s
line 3795 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, X_nl_all_levs, &
line 3821 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, thlm, rtm, rcm )
line 3867 : 106 chars : call update_radiation_variables( gr%nzm, gr%nzt, radht(i,:), Frad_SW_up(i,:), Frad_LW_up(i,:), &
line 3966 : 104 chars : clubb_config_flags%grid_remap_method, & ! intent(in)
line 4034 : 101 chars : .and. (stats_metadata%l_stats_last) ) then ! only adapt grid when the average of the last
line 4138 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_scheme = ', time_microphys_scheme
line 4139 : 104 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_advance = ', time_microphys_advance
line 4141 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_output_multi_col = ', time_output_multi_col
line 4263 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 4275 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 4276 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 4279 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 4281 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 4287 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 4288 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 4289 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 4290 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 4291 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 4292 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 4293 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 4294 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 4295 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 4296 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 4325 : 119 chars : if ( thlm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( thlm_sponge_damp_profile )
line 4326 : 118 chars : if ( rtm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( rtm_sponge_damp_profile )
line 4327 : 117 chars : if ( uv_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( uv_sponge_damp_profile )
line 4328 : 118 chars : if ( wp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp2_sponge_damp_profile )
line 4329 : 118 chars : if ( wp3_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp3_sponge_damp_profile )
line 4330 : 122 chars : if ( up2_vp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( up2_vp2_sponge_damp_profile )
line 5006 : 104 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 5014 : 106 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 5028 : 101 chars : 'be used for cases with forcings from an input file and for the atex ', &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/sounding.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 377 : 102 chars : um(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 379 : 101 chars : vm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 381 : 101 chars : ugm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 383 : 101 chars : vgm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 385 : 101 chars : thlm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 387 : 101 chars : rtm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 389 : 101 chars : press(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 392 : 101 chars : wm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 409 : 108 chars : edsclr_snd(km1,edsclr), edsclr_snd(k00,edsclr), &
line 410 : 107 chars : edsclr_snd(kp1,edsclr), edsclr_snd(kp2,edsclr) )
line 434 : 118 chars : um(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), u(k_above), u(k_above-1) )
line 435 : 118 chars : vm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), v(k_above), v(k_above-1) )
line 436 : 120 chars : ugm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), ug(k_above), ug(k_above-1) )
line 437 : 120 chars : vgm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), vg(k_above), vg(k_above-1) )
line 438 : 126 chars : thlm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), theta(k_above), theta(k_above-1) )
line 439 : 120 chars : rtm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), rt(k_above), rt(k_above-1) )
line 440 : 112 chars : press(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), p_in_Pa(k_above), &
line 442 : 122 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
line 446 : 105 chars : sclrm(i,k,sclr) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), &
line 452 : 109 chars : edsclrm(i,k,edsclr) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), &
line 481 : 124 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
line 507 : 124 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/clubb_tuner.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 649 : 102 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 7 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/sfc_varnce_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 776 : 105 chars : call sfc_varnce_check( sclr_dim, wp2(i,gr%k_lb_zm), up2(i,gr%k_lb_zm), & ! intent(in)
line 777 : 105 chars : vp2(i,gr%k_lb_zm), thlp2(i,gr%k_lb_zm), rtp2(i,gr%k_lb_zm), & ! intent(in)
line 778 : 105 chars : rtpthlp(i,gr%k_lb_zm), sclrp2(i,gr%k_lb_zm,:), & ! intent(in)
line 779 : 105 chars : sclrprtp(i,gr%k_lb_zm,:), sclrpthlp(i,gr%k_lb_zm,:), & ! intent(in)
line 780 : 108 chars : err_info ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/clubb_api_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2511 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
line 2578 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/output_netcdf.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1748 : 105 chars : status = nf90_def_var( ncid_zm, "columns", NF90_INT, (/column_id_zm/), column_var_id_zm )
line 1749 : 104 chars : status = nf90_def_var( ncid_zm, "altitude", NF90_PREC, (/vertical_id_zm/), vertical_var_id_zm )
line 1750 : 104 chars : status = nf90_def_var( ncid_zm, "time", NF90_PREC, (/time_id_zm/), time_var_id_zm )
line 1802 : 105 chars : status = nf90_def_var( ncid_zt, "columns", NF90_INT, (/column_id_zt/), column_var_id_zt )
line 1803 : 104 chars : status = nf90_def_var( ncid_zt, "altitude", NF90_PREC, (/vertical_id_zt/), vertical_var_id_zt )
line 1804 : 104 chars : status = nf90_def_var( ncid_zt, "time", NF90_PREC, (/time_id_zt/), time_var_id_zt )
line 1850 : 101 chars : status = nf90_put_var( ncid_zm, column_var_id_zm, column_list, start=(/1/), count=(/ngrdcol/) )
line 1851 : 101 chars : status = nf90_put_var( ncid_zt, column_var_id_zt, column_list, start=(/1/), count=(/ngrdcol/) )
line 1853 : 101 chars : !=================================== Allocate Output Arrays ===================================
line 1980 : 116 chars : !$acc upwp_out, vpwp_out, up2_out, vp2_out, wp3_out, rcm_out, cloud_frac_out, rtm_out, thlm_out )
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 4: module err_info_type_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 265 : 102 chars : write(err_info%err_header_global,'(A38, I3, A15, I3, A, A28, A33, F6.2, A1, F6.2, A, A39, A40)') &
line 276 : 105 chars : write(err_info%err_header(i),'(A38, I3, A15, I3, A, A22, I2, A11, F6.2, A13, F6.2, A, A39, A40)') &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/mono_flux_limiter.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 688 : 104 chars : !$acc parallel loop gang vector collapse(2) default(present) reduction(.or.:l_any_adjustment_needed)
line 839 : 121 chars : ! MONOFLUX TEST COMMENT DO NOT REMOVE if( any(wpxp_net_adjust /= 0.0) ) write(fstderr,*) "MONOFLUX: wpxp adjusted "
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/parameters_tunable.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 839 : 106 chars : / sqrt( 4.0_core_rknd * ( 1.0_core_rknd - 0.4_core_rknd )**3 &
line 840 : 118 chars : + clubb_params(ngrdcol,iSkw_max_mag)**2 ) ) ) ! Known magic number
line 902 : 117 chars : mult_factor_zt(i) = 1.0_core_rknd + clubb_params(i,imult_coef) * log( avg_deltaz(i) / grid_spacing_thresh )
line 917 : 104 chars : nu_vert_res_dep%nu10(i) = clubb_params(i,inu10) * mult_factor_zt(i) !We're unsure of the grid
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/pdf_parameter_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 101 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 298 : 102 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 300 : 101 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/advance_windm_edsclrm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1002 : 103 chars : call windm_edsclrm_rhs( nzm, nzt, ngrdcol, gr, windm_edsclrm_scalar, dt, & ! intent(in)
line 1003 : 103 chars : lhs_diff, edsclrm(:,:,edsclr), & ! intent(in)
line 1004 : 103 chars : edsclrm_forcing(:,:,edsclr), & ! intent(in)
line 1005 : 103 chars : rho_ds_zm, invrs_rho_ds_zt, & ! intent(in)
line 1006 : 103 chars : l_imp_sfc_momentum_flux, wpedsclrp(:,gr%k_lb_zm,edsclr), & ! intent(in)
line 1007 : 103 chars : stats_metadata, & ! intent(in)
line 1008 : 106 chars : stats_zt, & ! intent(inout)
line 1009 : 104 chars : rhs(:,:,edsclr) ) ! intent(out)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/grid_adaptation_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 128 chars : write(fstderr, *) "The fixed minimum grid density momentum heights need to cover at least the domain of the physics grid."
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/advance_xp2_xpyp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1319 : 101 chars : sclrprtp(:,:,sclr) ) ! Intent(inout)
line 1354 : 102 chars : sclrpthlp(:,:,sclr) ) ! Intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/model_flags.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 268 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 486 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 778 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/advance_xm_wpxp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 782 : 101 chars : call wpxp_term_pr1_lhs( nzm, ngrdcol, gr, C6rt_Skw_fnc, C6thl_Skw_fnc, C7_Skw_fnc, & ! Intent(in)
line 783 : 101 chars : invrs_tau_C6_zm, l_scalar_calc, & ! Intent(in)
line 784 : 102 chars : lhs_pr1_wprtp, lhs_pr1_wpthlp, lhs_pr1_wpsclrp ) ! Intent(out)
line 862 : 101 chars : stats_zt, stats_zm, stats_sfc, & ! InOut
line 863 : 101 chars : rtm, wprtp, thlm, wpthlp, sclrm, wpsclrp, & ! InOut
line 864 : 101 chars : err_info ) ! InOut
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/stats_zm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2449 : 104 chars : call stat_assign( var_index=stats_metadata%inorm_min_grid_dens, var_name="norm_min_grid_dens", &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/CLUBB_core/stats_clubb_utilities.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 3024 : 103 chars : call stat_update_var( stats_metadata%icovar_chi_eta_1, pdf_params%covar_chi_eta_1(icol,:), & ! In
line 3026 : 103 chars : call stat_update_var( stats_metadata%icovar_chi_eta_2, pdf_params%covar_chi_eta_2(icol,:), & ! In
line 3036 : 101 chars : call stat_update_var( stats_metadata%icorr_chi_eta_1, pdf_params%corr_chi_eta_1(icol,:), & ! In
line 3038 : 101 chars : call stat_update_var( stats_metadata%icorr_chi_eta_2, pdf_params%corr_chi_eta_2(icol,:), & ! In
line 3099 : 101 chars : chip2 = compute_variance_binormal( chi, pdf_params%chi_1(icol,:), pdf_params%chi_2(icol,:), &
line 3100 : 106 chars : pdf_params%stdev_chi_1(icol,:), pdf_params%stdev_chi_2(icol,:), &
line 4119 : 108 chars : 'floor stuff= ', floor( stats_metadata%stats_tout / stats_metadata%stats_tsamp )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 15 check(s) failed.
CLUBBStandardsCheck.py has begun.
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/SILHS/mt95.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 362: subroutine init_by_type( put, get )
line 382: subroutine init_by_scalar( put )
line 413: subroutine init_by_array( put )
line 461: subroutine next_state( )
line 593: subroutine genrand_int32_0d( y )
line 614: subroutine genrand_int32_1d( y )
line 629: subroutine genrand_int32_2d( y )
line 644: subroutine genrand_int32_3d( y )
line 659: subroutine genrand_int32_4d( y )
line 674: subroutine genrand_int32_5d( y )
line 689: subroutine genrand_int32_6d( y )
line 704: subroutine genrand_int32_7d( y )
line 720: subroutine genrand_int31_0d( y )
line 732: subroutine genrand_int31_1d( y )
line 747: subroutine genrand_int31_2d( y )
line 762: subroutine genrand_int31_3d( y )
line 777: subroutine genrand_int31_4d( y )
line 792: subroutine genrand_int31_5d( y )
line 807: subroutine genrand_int31_6d( y )
line 822: subroutine genrand_int31_7d( y )
line 838: subroutine genrand_real1_0d( r )
line 853: subroutine genrand_real1_1d( r )
line 868: subroutine genrand_real1_2d( r )
line 883: subroutine genrand_real1_3d( r )
line 898: subroutine genrand_real1_4d( r )
line 913: subroutine genrand_real1_5d( r )
line 928: subroutine genrand_real1_6d( r )
line 943: subroutine genrand_real1_7d( r )
line 959: subroutine genrand_real2_0d( r )
line 974: subroutine genrand_real2_1d( r )
line 989: subroutine genrand_real2_2d( r )
line 1004: subroutine genrand_real2_3d( r )
line 1019: subroutine genrand_real2_4d( r )
line 1034: subroutine genrand_real2_5d( r )
line 1049: subroutine genrand_real2_6d( r )
line 1064: subroutine genrand_real2_7d( r )
line 1080: subroutine genrand_real3_0d( r )
line 1095: subroutine genrand_real3_1d( r )
line 1110: subroutine genrand_real3_2d( r )
line 1125: subroutine genrand_real3_3d( r )
line 1140: subroutine genrand_real3_4d( r )
line 1155: subroutine genrand_real3_5d( r )
line 1170: subroutine genrand_real3_6d( r )
line 1185: subroutine genrand_real3_7d( r )
line 1201: subroutine genrand_res53_0d( r )
line 1218: subroutine genrand_res53_1d( r )
line 1233: subroutine genrand_res53_2d( r )
line 1248: subroutine genrand_res53_3d( r )
line 1263: subroutine genrand_res53_4d( r )
line 1278: subroutine genrand_res53_5d( r )
line 1293: subroutine genrand_res53_6d( r )
line 1308: subroutine genrand_res53_7d( r )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 1 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/wangara.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 104 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 105 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/rico.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 159 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 160 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module prescribe_forcings_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 299 : 104 chars : !$acc enter data create( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 465 : 118 chars : !$acc update device( wm_zt, wm_zm, thlm_forcing, rtm_forcing, um_ref, vm_ref, sclrm_forcing, edsclrm_forcing )
line 867 : 105 chars : call stat_update_var_pt( stats_metadata%ish, 1, wpthlp_sfc(i)*rho_zm(i,1)*Cp,& ! intent(in)
line 870 : 105 chars : call stat_update_var_pt( stats_metadata%ilh, 1, wprtp_sfc(i)*rho_zm(i,1)*Lv, & ! intent(in)
line 873 : 103 chars : call stat_update_var_pt( stats_metadata%iwpthlp_sfc, 1, wpthlp_sfc(i), & ! intent(in)
line 876 : 103 chars : call stat_update_var_pt( stats_metadata%iwprtp_sfc, 1, wprtp_sfc(i), & ! intent(in)
line 879 : 103 chars : call stat_update_var_pt( stats_metadata%iupwp_sfc, 1, upwp_sfc(i), & ! intent(in)
line 882 : 103 chars : call stat_update_var_pt( stats_metadata%ivpwp_sfc, 1, vpwp_sfc(i), & ! intent(in)
line 885 : 102 chars : call stat_update_var_pt( stats_metadata%iustar, 1, ustar(i), & ! intent(in)
line 888 : 103 chars : call stat_update_var_pt( stats_metadata%iT_sfc, 1, T_sfc(i), & ! intent(in)
line 894 : 103 chars : !$acc exit data delete( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 1097 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1101 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1105 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1106 : 112 chars : exner_zm(i,km1), exner_zm(i,k00), exner_zm(i,kp1), exner_zm(i,kp2) )
line 1109 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1110 : 108 chars : thlm_zm(i,km1), thlm_zm(i,k00), thlm_zm(i,kp1), thlm_zm(i,kp2) )
line 1113 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1114 : 104 chars : rtm_zm(i,km1), rtm_zm(i,k00), rtm_zm(i,kp1), rtm_zm(i,kp2) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/dycoms2_rf02.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 121 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 122 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/mpace_b.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 157 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 158 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/mpace_a.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 272 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 273 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/lba.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 96 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 97 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
line 176 : 101 chars : wpthlp_sfc(i) = convert_sens_ht_to_km_s( ( 270._core_rknd * ft**1.5_core_rknd ), rho_sfc(i) )
line 177 : 101 chars : wprtp_sfc(i) = convert_latent_ht_to_m_s( ( 554._core_rknd * ft**1.3_core_rknd ), rho_sfc(i) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/dycoms2_rf01.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 91 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 92 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/gabls2.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 152 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 153 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/Benchmark_cases/bomex.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 127 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 128 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 11 check(s) failed.
No matches for /home/jenkins/workspace/clubb_cmake_output_matching/src/KK_microphys/
CLUBBStandardsCheck.py has begun.
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module rev_direction_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 233 : 113 chars : !seed used = -1102123834 1480475276 -248259584 525496705 1614213535 -1267052688 6290033 -78466652
line 234 : 127 chars : !seed_output = (/ -1102123834, 1480475276, -248259584, 525496705, 1614213535, -1267052688, 6290033, -78466652 /)
line 750 : 101 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 754 : 104 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
line 795 : 101 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 801 : 104 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/G_unit_test_types/pdf_parameter_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 537 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_output_matching/src/G_unit_test_types/spurious_source_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 500 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 4 check(s) failed.
[91m===============================================================
[91mCLUBBStandardsCheck FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_cmake_output_matching/build/ifx/cmake_build_output.txt
[91m===============================================================[0m
[93mBuild completed successfully, but some source code checks have failed.[0m
![[Jenkins]](/jenkins/static/9dada5b8/images/svgs/logo.svg){kind=logo}
