[562/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlartg.f.o
[563/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlaset.f.o
[564/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dgbtrf.f.o
[565/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlagtm.f.o
[566/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlansy.f.o
[567/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlassq.f.o
[568/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dnrm2.f.o
[569/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlarfb.f.o
[570/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlaswp.f.o
[571/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dorg2l.f.o
[572/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlarft.f.o
[573/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlasrt.f.o
[574/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlascl.f.o
[575/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dpoequ.f.o
[576/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dgtsv.f.o
[577/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlantb.f.o
[578/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dorg2r.f.o
[579/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dorgtr.f.o
[580/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/drscl.f.o
[581/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dorgql.f.o
[582/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dorgqr.f.o
[583/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dpotrf2.f.o
[584/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dgtts2.f.o
[585/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dscal.f.o
[586/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dswap.f.o
[587/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dpotrf.f.o
[588/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlatrd.f.o
[589/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsyev.f.o
[590/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsyr2.f.o
[591/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlatbs.f.o
[592/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/iladlc.f.o
[593/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/idamax.f.o
[594/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/iladlr.f.o
[595/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dlasr.f.o
[596/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/ieeeck.f.o
[597/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsytrd.f.o
[598/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsytd2.f.o
[599/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsterf.f.o
[600/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsyrk.f.o
[601/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dtrmv.f.o
[602/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsyr2k.f.o
[603/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsteqr.f.o
[604/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dtbsv.f.o
[605/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dsymv.f.o
[606/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/ilaenv.f.o
[607/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/iparmq.f.o
[608/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dtrsm.f.o
[609/923] Building Fortran object src/Lapack/Lapack_double/CMakeFiles/clubb_lapack_double.dir/dtrmm.f.o
[610/923] Linking Fortran static library src/Lapack/liblapack_lib.a
[611/923] Generating Fortran dyndep file src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/Fortran.dd
[612/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/parameter_indices.F90.o
[613/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/array_index.F90.o
[614/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/clubb_precision.F90.o
[615/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/error_code.F90.o
[616/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/code_timer_module.F90.o
[617/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/constants_clubb.F90.o
[618/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/model_flags.F90.o
[619/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/endian.F90.o
[620/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/lapack_interfaces.F90.o
[621/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/calendar.F90.o
[622/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/file_functions.F90.o
[623/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/Nc_Ncn_eqns.F90.o
[624/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/T_in_K_module.F90.o
[625/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/hydromet_pdf_parameter_module.F90.o
[626/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/new_hybrid_pdf.F90.o
[627/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/err_info_type_module.F90.o
[628/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/interpolation.F90.o
[629/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/Skx_module.F90.o
[630/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/LY93_pdf.F90.o
[631/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/tridiag_lu_solver.F90.o
[632/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/matrix_operations.F90.o
[633/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/diagnose_correlations_module.F90.o
[634/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/mean_adv.F90.o
[635/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/new_tsdadg_pdf.F90.o
[636/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/calc_roots.F90.o
[637/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/penta_lu_solver.F90.o
[638/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/penta_bicgstab_solver.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/penta_bicgstab_solver.F90:140:10:
140 | if ( norm_rhs == 0.0) then
| 1
Warning: Equality comparison for REAL(8) at (1) [-Wcompare-reals]
[639/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/corr_varnce_module.F90.o
[640/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/lapack_wrap.F90.o
[641/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/index_mapping.F90.o
[642/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/grid_class.F90.o
[643/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/matrix_solver_wrapper.F90.o
[644/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/sigma_sqd_w_module.F90.o
[645/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/saturation.F90.o
[646/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/sponge_layer_damping.F90.o
[647/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/turbulent_adv_pdf.F90.o
[648/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/pos_definite_module.F90.o
[649/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/calc_pressure.F90.o
[650/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/adg1_adg2_3d_luhar_pdf.F90.o
[651/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/diffusion.F90.o
[652/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/new_pdf.F90.o
[653/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/remapping_module.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/remapping_module.F90:1210:43:
1210 | if(f(i,k+1)*f(i,k-1)<zero .and. df2(i,k)/=zero) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/remapping_module.F90:1104:15:
1104 | if(dm(i) == zero) then
| 1
Warning: Equality comparison for REAL(8) at (1) [-Wcompare-reals]
[654/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/parameters_tunable.F90.o
[655/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/pdf_parameter_module.F90.o
[656/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/new_pdf_main.F90.o
[657/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_netcdf.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/stats_netcdf.F90:2961:73:
2961 | character(len=REG_LINE_LEN) , dimension(NML_REG_MAX_ENTRIES) :: entry
| 1
Warning: Array 'entry' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
[658/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/new_hybrid_pdf_main.F90.o
[659/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/mono_flux_limiter.F90.o
[660/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_xp3_module.F90.o
[661/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_helper_module.F90.o
[662/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/numerical_check.F90.o
[663/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/pdf_utilities.F90.o
[664/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/precipitation_fraction.F90.o
[665/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/fill_holes.F90.o
[666/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/clip_explicit.F90.o
[667/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/sfc_varnce_module.F90.o
[668/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_clubb_utilities.F90.o
[669/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/grid_adaptation_module.F90.o
[670/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_windm_edsclrm_module.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/advance_windm_edsclrm_module.F90:50:78:
50 | order_xp2_xpyp, order_wp2_wp3, order_windm, &
| 1
Warning: Unused dummy argument 'order_windm' at (1) [-Wunused-dummy-argument]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/advance_windm_edsclrm_module.F90:50:65:
50 | order_xp2_xpyp, order_wp2_wp3, order_windm, &
| 1
Warning: Unused dummy argument 'order_wp2_wp3' at (1) [-Wunused-dummy-argument]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/advance_windm_edsclrm_module.F90:50:50:
50 | order_xp2_xpyp, order_wp2_wp3, order_windm, &
| 1
Warning: Unused dummy argument 'order_xp2_xpyp' at (1) [-Wunused-dummy-argument]
[671/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/mixing_length.F90.o
[672/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_wp2_wp3_module.F90.o
[673/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/setup_clubb_pdf_params.F90.o
[674/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_xm_wpxp_module.F90.o
[675/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_xp2_xpyp_module.F90.o
[676/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/pdf_closure_module.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/CLUBB_core/pdf_closure_module.F90:3610:52:
3610 | l_predict_upwp_vpwp, & ! Intent(in)
| 1
Warning: Unused dummy argument 'l_predict_upwp_vpwp' at (1) [-Wunused-dummy-argument]
[677/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_clubb_core_module.F90.o
[678/923] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/clubb_api_module.F90.o
[679/923] Linking Fortran static library src/CLUBB_core/libclubb_core_lib.a
[680/923] Generating Fortran dyndep file src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/Fortran.dd
[681/923] Generating Fortran dyndep file src/CMakeFiles/text_writer_lib.dir/Fortran.dd
[682/923] Generating Fortran dyndep file src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/Fortran.dd
[683/923] Generating Fortran dyndep file src/Microphys/Microphys_utils/CMakeFiles/microphys_utils_lib.dir/Fortran.dd
[684/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa11g.F.o
[685/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa12g.F.o
[686/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa15.F.o
[687/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa18g.F.o
[688/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa19.F.o
[689/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa20g.F.o
[690/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa21.F.o
[691/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa10g.F.o
[692/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa14g.F.o
[693/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa18.F.o
[694/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa19g.F.o
[695/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa21g.F.o
[696/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa13g.F.o
[697/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa22.F.o
[698/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa22g.F.o
[699/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa25.F.o
[700/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa27.F.o
[701/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa28.F.o
[702/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/kinds.F90.o
[703/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa17g.F.o
[704/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa5g.F.o
[705/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa6.F.o
[706/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa7g.F.o
[707/923] Building Fortran object src/CMakeFiles/text_writer_lib.dir/text_writer.F90.o
[708/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/gamma.F.o
[709/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/qsatvi.F.o
[710/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/frzh.F.o
[711/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa9g.F.o
[712/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esat_new.F.o
[713/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa12.F.o
[714/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa7.F.o
[715/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa8g.F.o
[716/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqi.F.o
[717/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugsrad_physconst.F90.o
[718/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa26.F.o
[719/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqr.F.o
[720/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esati.F.o
[721/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/esatv.F.o
[722/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa27r.F.o
[723/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/newexp.F90.o
[724/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/slope.F.o
[725/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqg.F.o
[726/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/adjmlt.F.o
[727/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/qtadj.F.o
[728/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/rayle.F.o
[729/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/tgqs.F.o
[730/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmcol.F.o
[731/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/comscp2.F.o
[732/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/comscp1.F.o
[733/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/eqa9.F.o
[734/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/conice.F.o
[735/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmtqi.F.o
[736/923] Linking Fortran static library src/libtext_writer_lib.a
[737/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_sel.F.o
[738/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugsrad_planck.F90.o
[739/923] Building Fortran object src/Microphys/Microphys_utils/CMakeFiles/microphys_utils_lib.dir/microphys_stats_vars_module.F90.o
[740/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/cloudg.F.o
[741/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/cloud_correlate.F90.o
[742/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/gascon.F.o
[743/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/nrmtqw.F.o
[744/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw.F.o
[745/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw.F.o
[746/923] Linking Fortran static library src/Microphys/Microphys_utils/libmicrophys_utils_lib.a
[747/923] Generating Fortran dyndep file src/Microphys/Morrison_microphys/CMakeFiles/morrison_microphys_lib.dir/Fortran.dd
[748/923] Generating Fortran dyndep file src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Fortran.dd
[749/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/parameters_KK.F90.o
[750/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Parabolic_constants.f90.o
[751/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_local_means.F90.o
[752/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_ocastrndm.F90.o
[753/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_iter.F.o
[754/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/AiryFunction.f90.o
[755/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw_iter.F.o
[756/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_bs.F.o
[757/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw_ocastrndm.F90.o
[758/923] Building Fortran object src/Microphys/COAMPS_microphys/CMakeFiles/coamps_lib.dir/adjtq.F.o
[759/923] Linking Fortran static library src/Microphys/COAMPS_microphys/libcoamps_lib.a
[760/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_rad.F.o
[761/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/Parabolic.f90.o
[762/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_utilities.F90.o
[763/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/gases_ckd.F90.o
[764/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_means.F90.o
[765/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_all_MM.F90.o
[766/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_covar.F90.o
[767/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_means.F90.o
[768/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_Nrm_tendencies.F90.o
[769/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_variances.F90.o
[770/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_turbulent_sed.F90.o
[771/923] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_covariances.F90.o
[772/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_swr.F.o
[773/923] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/bugs_lwr.F.o
[774/923] Linking Fortran static library src/Microphys/KK_microphys/libKK_microphys_lib.a
[775/923] Generating Fortran dyndep file src/SILHS/CMakeFiles/silhs_lib.dir/Fortran.dd
[776/923] Linking Fortran static library src/Radiation/BUGSrad/libbugsrad_lib.a
[777/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/parameters_silhs.F90.o
[778/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_arrays.F90.o
[779/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/est_kessler_microphys_module.F90.o
[780/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/transform_to_pdf_module.F90.o
[781/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/mt95.F90.o
[782/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/generate_uniform_sample_module.F90.o
[783/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/math_utilities.F90.o
[784/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/lh_microphys_var_covar_module.F90.o
[785/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_importance_sample_module.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/SILHS/silhs_importance_sample_module.F90:638:62:
633 | do category=1, num_importance_categories
| 2
......
638 | rand_vect(sample) < category_cumulative_probs(category+1) ) then
| 1
Warning: Array reference at (1) out of bounds (9 > 8) in loop beginning at (2) [-Wdo-subscript]
[786/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_driver_module.F90.o
[787/923] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_api_module.F90.o
[788/923] Linking Fortran static library src/SILHS/libsilhs_lib.a
[789/923] Generating Fortran dyndep file src/Radiation/CMakeFiles/radiation_lib.dir/Fortran.dd
[790/923] Generating Fortran dyndep file src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/Fortran.dd
[791/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/parameters_radiation.F90.o
[792/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrtype.f90.o
[793/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/cos_solar_zen_module.F90.o
[794/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/soil_vegetation.F90.o
[795/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/quicksort.F90.o
[796/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nr.f90.o
[797/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/rad_lwsw_module.F90.o
[798/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/extended_atmosphere_module.F90.o
[799/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/simple_rad_module.F90.o
[800/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/enhanced_simann.F90.o
[801/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/radiation_variables_module.F90.o
[802/923] Building Fortran object src/Microphys/Morrison_microphys/CMakeFiles/morrison_microphys_lib.dir/module_mp_graupel.F90.o
[803/923] Linking Fortran static library src/Microphys/Morrison_microphys/libmorrison_microphys_lib.a
[804/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrutil.f90.o
[805/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amebsa.f90.o
[806/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amoeba.f90.o
[807/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/bugsrad_driver.F90.o
[808/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran_state.f90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Numerical_recipes/ran_state.f90:8:59:
8 | INTEGER(K4B), PARAMETER :: hg=huge(1_K4B), hgm=-hg, hgng=hgm-1
| 1
Warning: Integer outside symmetric range implied by Standard Fortran at (1)
[809/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_s.f90.o
[810/923] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_v.f90.o
[811/923] Linking Fortran static library src/Numerical_recipes/libnumerical_recipes_lib.a
[812/923] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/radiation_module.F90.o
[813/923] Linking Fortran static library src/Radiation/libradiation_lib.a
[814/923] Generating Fortran dyndep file src/Input_fields/CMakeFiles/input_fields_lib.dir/Fortran.dd
[815/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_names.F90.o
[816/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/extrapolation.F90.o
[817/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/stat_file_module.F90.o
[818/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/hydrostatic_module.F90.o
[819/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_netcdf.F90.o
[820/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_reader.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/input_reader.F90:498:28:
491 | do i=1, dim_grid
| 2
......
498 | if ( grid(i) < grid(i-1) ) then
| 1
Warning: Array reference at (1) out of bounds (0 < 1) in loop beginning at (2) [-Wdo-subscript]
[821/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/corr_varnce_input_reader.F90.o
[822/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/stat_file_utils.F90.o
[823/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_interpret.F90.o
[824/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/sounding.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:156:13:
156 | p_in_Pa, & ! Pressure [Pa]
| 1
Warning: Array 'p_in_pa' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:151:8:
151 | rt, & ! Total water mixing ratio sounding [kg/kg]
| 1
Warning: Array 'rt' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:157:10:
157 | subs ! Vertical velocity sounding [m/s or Pa/s]
| 1
Warning: Array 'subs' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:150:11:
150 | theta, & ! Liquid potential temperature sounding [K]
| 1
Warning: Array 'theta' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:152:7:
152 | u, & ! u wind sounding [m/s]
| 1
Warning: Array 'u' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:154:8:
154 | ug, & ! u geostrophic wind sounding [m/s]
| 1
Warning: Array 'ug' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:153:7:
153 | v, & ! v wind sounding [m/s]
| 1
Warning: Array 'v' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:155:8:
155 | vg, & ! v geostrophic wind sounding [m/s]
| 1
Warning: Array 'vg' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/sounding.F90:149:7:
149 | z, & ! Altitude [m]
| 1
Warning: Array 'z' at (1) is larger than limit set by '-fmax-stack-var-size=', moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the '-fmax-stack-var-size=' limit (or use '-frecursive', which implies unlimited '-fmax-stack-var-size') - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
[825/923] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_fields.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/input_fields.F90:2877:22:
2877 | base_unit_number = 15
| 1
Warning: Unused parameter 'base_unit_number' declared at (1) [-Wunused-parameter]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Input_fields/input_fields.F90:151:8:
151 | use constants_clubb, only: fstderr, fstdout ! Constants
| 1
Warning: Unused parameter 'fstdout' which has been explicitly imported at (1) [-Wunused-parameter]
[826/923] Linking Fortran static library src/Input_fields/libinput_fields_lib.a
[827/923] Generating Fortran dyndep file src/Microphys/CMakeFiles/microphys_lib.dir/Fortran.dd
[828/923] Generating Fortran dyndep file src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Fortran.dd
[829/923] Generating Fortran dyndep file src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/Fortran.dd
[830/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/parameters_microphys.F90.o
[831/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/silhs_category_test.F90.o
[832/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/diag_ustar_module.F90.o
[833/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/spec_hum_to_mixing_ratio.F90.o
[834/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_heaviside_tests.F90.o
[835/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Nc_Ncn_test.F90.o
[836/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/read_corr_mtx_test.F90.o
[837/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/wangara.F90.o
[838/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/cloud_sed_module.F90.o
[839/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/silhs_category_variance_module.F90.o
[840/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/corr_cholesky_mtx_tests.F90.o
[841/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_min_max_tests.F90.o
[842/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/KK_integrals_tests.F90.o
[843/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/ice_dfsn_module.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Microphys/ice_dfsn_module.F90:272:25:
207 | do k = gr%nzt, 1, -1
| 2
......
272 | mass_ice_cryst(k-1) = mass_ice_cryst(k) &
| 1
Warning: Array reference at (1) out of bounds (0 < 1) in loop beginning at (2) [-Wdo-subscript]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Microphys/ice_dfsn_module.F90:287:25:
207 | do k = gr%nzt, 1, -1
| 2
......
287 | mass_ice_cryst(k-1) = mass_ice_cryst(k)
| 1
Warning: Array reference at (1) out of bounds (0 < 1) in loop beginning at (2) [-Wdo-subscript]
[844/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/hole_filling_tests.F90.o
[845/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/fill_holes_tests.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/G_unit_test_types/fill_holes_tests.F90:407:27:
407 | .or. any( field(:,upper_hf_level:nz) /= field(:,upper_hf_level:nz) ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/G_unit_test_types/fill_holes_tests.F90:406:22:
406 | if ( any( field(:,1:lower_hf_level) /= field(:,1:lower_hf_level) ) &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/G_unit_test_types/fill_holes_tests.F90:462:22:
462 | if ( any( field_rev_rev /= field ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/G_unit_test_types/fill_holes_tests.F90:221:27:
221 | .or. any( field(:,upper_hf_level:nz) /= field(:,upper_hf_level:nz) ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/G_unit_test_types/fill_holes_tests.F90:220:22:
220 | if ( any( field(:,1:lower_hf_level) /= field(:,1:lower_hf_level) ) &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/G_unit_test_types/fill_holes_tests.F90:275:22:
275 | if ( any( field_rev_rev /= field ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
[846/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/tuner_tests.F90.o
[847/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/w_up_in_cloud_tests.F90.o
[848/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/gfdl_activation.F90.o
[849/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/mixed_moment_PDF_integrals.F90.o
[850/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/mu_sigma_hm_tests.F90.o
[851/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90.o
[852/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/time_dependent_input.F90.o
[853/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_oct14.F90.o
[854/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/jun25.F90.o
[855/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_nov02.F90.o
[856/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/pdf_hydromet_microphys_wrapper.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/Microphys/pdf_hydromet_microphys_wrapper.F90:15:29:
15 | itime, dt_main, vert_decorr_coef, & ! In
| 1
Warning: Unused dummy argument 'dt_main' at (1) [-Wunused-dummy-argument]
[857/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/nov11.F90.o
[858/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/bomex.F90.o
[859/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/sfc_flux.F90.o
[860/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/ekman.F90.o
[861/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_3year.F90.o
[862/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/fire.F90.o
[863/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm.F90.o
[864/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_init_cleanup.F90.o
[865/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_97.F90.o
[866/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cloud_feedback.F90.o
[867/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_0003.F90.o
[868/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3.F90.o
[869/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/neutral_case.F90.o
[870/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cobra.F90.o
[871/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/lba.F90.o
[872/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/rev_direction_grid_test.F90.o
[873/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/twp_ice.F90.o
[874/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf02.F90.o
[875/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/astex_a209.F90.o
[876/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3_night.F90.o
[877/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf01.F90.o
[878/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_b.F90.o
[879/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_a.F90.o
[880/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls2.F90.o
[881/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex_long.F90.o
[882/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/rico.F90.o
[883/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex.F90.o
[884/923] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/pdf_parameter_tests.F90.o
[885/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/coamps_microphys_driver_module.F90.o
[886/923] Linking Fortran static library src/G_unit_test_types/libG_unit_test_lib.a
[887/923] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/prescribe_forcings.F90.o
[888/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/advance_microphys_module.F90.o
[889/923] Linking Fortran static library src/Benchmark_cases/libbenchmark_cases_lib.a
[890/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/KK_microphys_module.F90.o
[891/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/morrison_microphys_module.F90.o
[892/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/estimate_scm_microphys_module.F90.o
[893/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/lh_microphys_driver_module.F90.o
[894/923] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_driver.F90.o
[895/923] Linking Fortran static library src/Microphys/libmicrophys_lib.a
[896/923] Generating Fortran dyndep file src/CMakeFiles/clubb_driver_lib.dir/Fortran.dd
[897/923] Generating Fortran dyndep file src/CMakeFiles/G_unit_tests.dir/Fortran.dd
[898/923] Building Fortran object src/CMakeFiles/G_unit_tests.dir/G_unit_tests.F90.o
[899/923] Linking Fortran executable src/G_unit_tests
[900/923] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/generalized_grid_test.F90.o
[901/923] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/clubb_driver.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_driver.F90:6161:25:
6161 | ( gr, iunit, hydromet_dim, hm_metadata, & ! In
| 1
Warning: Unused dummy argument 'iunit' at (1) [-Wunused-dummy-argument]
[902/923] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/clubb_loss_driver.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver.F90:255:28:
255 | is_finite_core_value = ( value == value ) .and. ( abs( value ) <= huge( value ) )
| 1
Warning: Equality comparison for REAL(8) at (1) [-Wcompare-reals]
[903/923] Linking Fortran static library src/libclubb_driver_lib.a
[904/923] Generating Fortran dyndep file src/CMakeFiles/clubb_standalone.dir/Fortran.dd
[905/923] Generating Fortran dyndep file src/CMakeFiles/clubb_tuner.dir/Fortran.dd
[906/923] Generating Fortran dyndep file src/CMakeFiles/clubb_loss_driver_test.dir/Fortran.dd
[907/923] Generating Fortran dyndep file src/CMakeFiles/clubb_standalone_loss.dir/Fortran.dd
[908/923] Generating Fortran dyndep file src/CMakeFiles/clubb_driver_test.dir/Fortran.dd
[909/923] Generating Fortran dyndep file src/CMakeFiles/clubb_thread_test.dir/Fortran.dd
[910/923] Building Fortran object src/CMakeFiles/clubb_standalone.dir/clubb_standalone.F90.o
[911/923] Building Fortran object src/CMakeFiles/clubb_thread_test.dir/clubb_thread_test.F90.o
[912/923] Building Fortran object src/CMakeFiles/clubb_driver_test.dir/clubb_driver_test.F90.o
[913/923] Linking Fortran executable src/clubb_thread_test
[914/923] Building Fortran object src/CMakeFiles/clubb_standalone_loss.dir/clubb_standalone_loss.F90.o
[915/923] Linking Fortran executable src/clubb_driver_test
[916/923] Linking Fortran executable src/clubb_standalone
[917/923] Building Fortran object src/CMakeFiles/clubb_tuner.dir/error.F90.o
[918/923] Building Fortran object src/CMakeFiles/clubb_loss_driver_test.dir/clubb_loss_driver_test.F90.o
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:262:14:
262 | if ( any( test_scaled_rmse /= reference_scaled_rmse ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:267:14:
267 | if ( any( test_correlation /= reference_correlation ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:272:14:
272 | if ( any( test_std_ratio /= reference_std_ratio ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:277:14:
277 | if ( any( test_centered_rmse_norm /= reference_centered_rmse_norm ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:282:14:
282 | if ( any( test_bias_norm /= reference_bias_norm ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:501:14:
501 | if ( any( clubb_params_all_1 /= clubb_params_all_2 ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:510:14:
510 | any( reinit_bias_norm_1 /= reinit_bias_norm_2 ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:509:14:
509 | any( reinit_centered_rmse_norm_1 /= reinit_centered_rmse_norm_2 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:508:14:
508 | any( reinit_std_ratio_1 /= reinit_std_ratio_2 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:507:14:
507 | any( reinit_correlation_1 /= reinit_correlation_2 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:506:14:
506 | if ( any( reinit_scaled_rmse_1 /= reinit_scaled_rmse_2 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:420:14:
420 | if ( all( tweaked_scaled_rmse == reference_scaled_rmse ) ) then
| 1
Warning: Equality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:360:14:
360 | any( manual_bias_norm_2 /= manual_bias_norm_1 ) ) then
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:359:14:
359 | any( manual_centered_rmse_norm_2 /= manual_centered_rmse_norm_1 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:358:14:
358 | any( manual_std_ratio_2 /= manual_std_ratio_1 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:357:14:
357 | any( manual_correlation_2 /= manual_correlation_1 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/src/clubb_loss_driver_test.F90:356:14:
356 | if ( any( manual_scaled_rmse_2 /= manual_scaled_rmse_1 ) .or. &
| 1
Warning: Inequality comparison for REAL(8) at (1) [-Wcompare-reals]
[919/923] Linking Fortran executable src/clubb_standalone_loss
[920/923] Building Fortran object src/CMakeFiles/clubb_tuner.dir/clubb_tuner.F90.o
[921/923] Linking Fortran executable src/clubb_loss_driver_test
[922/923] Linking Fortran executable src/clubb_tuner
[922/923] Install the project...
-- Install configuration: "Debug"
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/libclubb_driver_lib.a
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_tuner
-- Set runtime path of "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_tuner" to "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib64:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/G_unit_tests
-- Set runtime path of "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/G_unit_tests" to "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib64:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_thread_test
-- Set runtime path of "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_thread_test" to "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib64:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_standalone
-- Set runtime path of "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_standalone" to "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib64:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_driver_test
-- Set runtime path of "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_driver_test" to "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib64:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_standalone_loss
-- Set runtime path of "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_standalone_loss" to "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib64:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
-- Installing: /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_loss_driver_test
-- Set runtime path of "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/clubb_loss_driver_test" to "/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib:/home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/gcc_DEBUG_PRECdouble/lib64:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
CLUBBStandardsCheck.py: beginning check on src
PASS: 0 checks failed for src
CLUBBStandardsCheck.py: beginning check on src/CLUBB_core
PASS: 0 checks failed for src/CLUBB_core
CLUBBStandardsCheck.py: beginning check on src/SILHS
PASS: 0 checks failed for src/SILHS
CLUBBStandardsCheck.py: beginning check on src/Benchmark_cases
PASS: 0 checks failed for src/Benchmark_cases
CLUBBStandardsCheck.py: beginning check on src/Radiation
PASS: 0 checks failed for src/Radiation
CLUBBStandardsCheck.py: beginning check on src/Microphys
PASS: 0 checks failed for src/Microphys
CLUBBStandardsCheck.py: beginning check on src/Microphys/KK_microphys
PASS: 0 checks failed for src/Microphys/KK_microphys
CLUBBStandardsCheck.py: beginning check on src/G_unit_test_types
PASS: 0 checks failed for src/G_unit_test_types
[92mBuild completed successfully, and all source code checks passed.[0m
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Run)
[Pipeline] sh
+ python tests/run_G_unit_tests.py
Running G_unit_tests
Performing KK integrals tests
Percent Difference Tolerance (maximum acceptable percent difference between the CLUBB results and the MATLAB results using the same equations): 1.50000E-12
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 1
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: 3.940566852245362E-04
MATLAB result: 3.940566852245361E-04
Percent difference: 1.37569E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: 3.927115990964176E-04
MATLAB result: 3.927115990964175E-04
Percent difference: 2.76081E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: 3.959157231937519E-04
MATLAB result: 3.959157231937519E-04
Percent difference: 1.36923E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: 3.961224408774508E-04
MATLAB result: 3.961224408774508E-04
Percent difference: 1.36852E-14%
Agreement with regards to integral: Trivariate NNL
Obtained result: 5.957899876478518E-10
MATLAB result: 5.957899876478559E-10
Percent difference: 6.94188E-13%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 5.299646183560617E-10
MATLAB result: 5.299646183560650E-10
Percent difference: 6.24329E-13%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 5.543555152546510E-10
MATLAB result: 5.543555152546526E-10
Percent difference: 2.98430E-13%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 5.286452253001267E-10
MATLAB result: 5.286452253001284E-10
Percent difference: 3.12944E-13%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -9.854231981928352E-04
MATLAB result: -9.854231981928350E-04
Percent difference: 2.20048E-14%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: -9.922448817549015E-04
MATLAB result: -9.922448817549015E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 8.940070763287877E-09
MATLAB result: 8.940070763287870E-09
Percent difference: 7.40201E-14%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 8.942709549399747E-09
MATLAB result: 8.942709549399743E-09
Percent difference: 3.69991E-14%
Agreement with regards to integral: Bivariate LL
Obtained result: 1.007487885941809E-02
MATLAB result: 1.007487885941809E-02
Percent difference: 1.72183E-14%
==================================================
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 2
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: -4.441972023148827E-05
MATLAB result: -4.441972023148829E-05
Percent difference: 4.57652E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: -4.559373570842309E-05
MATLAB result: -4.559373570842311E-05
Percent difference: 4.45868E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: -5.040842768062482E-05
MATLAB result: -5.040842768062482E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: -5.038775591225493E-05
MATLAB result: -5.038775591225493E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL
Obtained result: 4.629614112194526E-09
MATLAB result: 4.629614112194527E-09
Percent difference: 1.78672E-14%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 4.604609365066508E-09
MATLAB result: 4.604609365066509E-09
Percent difference: 1.79642E-14%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 4.685272472815394E-09
MATLAB result: 4.685272472815394E-09
Percent difference: 1.76549E-14%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 4.683452323676534E-09
MATLAB result: 4.683452323676534E-09
Percent difference: 0.00000E+00%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -1.088125285831538E-04
MATLAB result: -1.088125285831538E-04
Percent difference: 2.49099E-14%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: -9.922448817549016E-05
MATLAB result: -9.922448817549016E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 7.907812698669825E-10
MATLAB result: 7.907812698669821E-10
Percent difference: 5.23015E-14%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 6.330953526469324E-10
MATLAB result: 6.330953526469324E-10
Percent difference: 0.00000E+00%
==================================================
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 3
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: -7.622010070476262E-05
MATLAB result: -7.622010070476262E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: -7.695119321547280E-05
MATLAB result: -7.695119321547280E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: -1.000000000000000E-04
MATLAB result: -1.000000000000000E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: -1.000000000000000E-04
MATLAB result: -1.000000000000000E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL
Obtained result: 4.851589269710427E-09
MATLAB result: 4.851589269710427E-09
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 4.837259568295437E-09
MATLAB result: 4.837259568295437E-09
Percent difference: 1.71002E-14%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 5.000000000000000E-09
MATLAB result: 5.000000000000000E-09
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 5.000000000000000E-09
MATLAB result: 5.000000000000000E-09
Percent difference: 0.00000E+00%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -4.609761356905442E-05
MATLAB result: -4.609761356905441E-05
Percent difference: 1.46998E-14%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: 0.000000000000000E+00
MATLAB result: 0.000000000000000E+00
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 3.254808634091251E-10
MATLAB result: 3.254808634091251E-10
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 0.000000000000000E+00
MATLAB result: 0.000000000000000E+00
Percent difference: 0.00000E+00%
==================================================
Success!
==================================================
Performing correlation cholesky matrix setup tests
correlation matrix :
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
--
correlation matrix :
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
--
correlation matrix :
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 1.0000000000000000 0.86602540378443860
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 0.50000000000000011 0.43301270189221941
0.0000000000000000 0.0000000000000000 0.25000000000000011
--
==================================================
Performing correlation matrix approximation tests
correlation cholesky matrix :
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
--
correlation cholesky matrix :
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
Agreement
Result:
1.0000000000000000 1.0000000000000000 1.0000000000000000
1.0000000000000000 1.0000000000000000 1.0000000000000000
1.0000000000000000 1.0000000000000000 1.0000000000000000
--
correlation cholesky matrix :
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 0.50000000000000011 0.43301270189221941
0.0000000000000000 0.0000000000000000 0.25000000000000011
Agreement
Result:
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.86602540378443860 1.0000000000000000 0.96650635094610959
0.86602540378443860 0.96650635094610959 1.0000000000000000
--
==================================================
Success!
==================================================
Performing hole_filling_hm_one_lev_tests
Hole-filling was conservative
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: Hole filling failed! A hole could not be filled.
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
==================================================
Success!
==================================================
Performing fill_holes_hydromet_tests
testset_in(:, 1 ) = 1.0000000000000000 2.0000000000000000 3.0000000000000000 4.0000000000000000 5.0000000000000000 6.0000000000000000
testset_in(:, 2 ) = 6.0000000000000000 5.0000000000000000 4.0000000000000000 3.0000000000000000 2.0000000000000000 1.0000000000000000
testset_in(:, 3 ) = 3.0000000000000000 3.0000000000000000 3.0000000000000000 4.0000000000000000 4.0000000000000000 4.0000000000000000
testset_in(:, 4 ) = 1.0000000000000000 3.0000000000000000 2.0000000000000000 1.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 5 ) = 1.0000000000000000 -2.0000000000000000 -4.0000000000000000 -3.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 6 ) = 2.0000000000000000 -1.0000000000000000 -1.0000000000000000 1.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 7 ) = 1.0000000000000000 4.0000000000000000 2.0000000000000000 3.0000000000000000 -1.0000000000000000 0.0000000000000000
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: Hole filling failed! A hole could not be filled.
Warning: One-level hole filling was not successful! total_mass ~= 0
Hole-filling was conservative
Hole-filling was conservative
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
==================================================
Success!
Nc-Ncn equations unit test
==========================
Iteration = 1
mu_chi_1 = -1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.15865525393145707
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 4.7896918412674905E-002
Nc_in_cloud (from Ncn) = 66978771.649335034
Ncm (from Ncn) = 3208076.7610693830
Ncnm (from Nc_in_cloud) = 50000000.000000007
Ncnm (from Ncm) = 50000000.000000007
Test iteration 1 is a success!
======================================================
Iteration = 2
mu_chi_1 = -1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-009
sigma_chi_2 = 1.5000000000000000E-009
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.0000000000000000
cloud fraction (2nd PDF component) = 0.0000000000000000
cloud fraction = 0.0000000000000000
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 0.0000000000000000
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 2 is a success!
======================================================
Iteration = 3
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = 5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.84134474606854293
cloud fraction (2nd PDF component) = 0.99957093966680322
cloud fraction = 0.95210308158732504
Nc_in_cloud (from Ncn) = 51650441.529586732
Ncm (from Ncn) = 49176544.545665480
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 3 is a success!
======================================================
Iteration = 4
mu_chi_1 = 1.0000000000000000E-008
mu_chi_2 = -1.0000000000000000E-008
sigma_chi_1 = 5.0000000000000002E-005
sigma_chi_2 = 5.0000000000000002E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 50000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.10000000000000001
mixture fraction = 0.50000000000000000
cloud fraction (1st PDF component) = 0.50007978845554835
cloud fraction (2nd PDF component) = 0.49992021154445165
cloud fraction = 0.50000000000000000
Nc_in_cloud (from Ncn) = 53982783.648312390
Ncm (from Ncn) = 26991391.824156195
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 4 is a success!
======================================================
Iteration = 5
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = 5.0000000000000002E-005
sigma_chi_1 = 9.9999999999999995E-007
sigma_chi_2 = 1.5000000000000000E-006
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.50000000000000000
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 1.0000000000000000
cloud fraction (2nd PDF component) = 1.0000000000000000
cloud fraction = 1.0000000000000000
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 50000000.000000000
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 5 is a success!
======================================================
Iteration = 6
mu_chi_1 = -9.9999999999999995E-008
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 50000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.0000000000000000
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.49601064368536840
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 9.9545377003631155E-002
Nc_in_cloud (from Ncn) = 49999999.999999993
Ncm (from Ncn) = 4977268.8501815572
Ncnm (from Nc_in_cloud) = 49999999.999999993
Ncnm (from Ncm) = 49999999.999999993
Test iteration 6 is a success!
======================================================
Iteration = 7
mu_chi_1 = 9.9999999999999995E-007
mu_chi_2 = -4.9999999999999998E-007
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 0.0000000000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.53982783727702899
cloud fraction (2nd PDF component) = 0.48670438618290790
cloud fraction = 0.49732907640173213
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 24866453.820086606
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 7 is a success!
======================================================
Iteration = 8
mu_chi_1 = 9.9999999999999995E-007
mu_chi_2 = -4.9999999999999998E-007
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-009
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.53982783727702899
cloud fraction (2nd PDF component) = 0.0000000000000000
cloud fraction = 0.10796556745540581
Nc_in_cloud (from Ncn) = 81037694.237492040
Ncm (from Ncn) = 8749280.6436284967
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 8 is a success!
======================================================
Iteration = 9
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-009
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 1.0000000000000000
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 0.20034324826655747
Nc_in_cloud (from Ncn) = 52151569.416871324
Ncm (from Ncn) = 10448214.819174858
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 9 is a success!
======================================================
Iteration = 10
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.84134474606854293
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 0.16861219748026607
Nc_in_cloud (from Ncn) = 60768988.354576342
Ncm (from Ncn) = 10246392.665117815
Ncnm (from Nc_in_cloud) = 50000000.000000007
Ncnm (from Ncm) = 50000000.000000007
Test iteration 10 is a success!
======================================================
Success!
Performing corr_mtx_test
==================================================
Expected:
1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 1.00 1.10 1.20
0.00 1.00 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0.10 0.11
0.00 0.00 1.00 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.01
0.00 0.00 0.00 1.00 -1.00 -2.00 -3.00 -4.00 -5.00 -6.00 -7.00 -8.00
0.00 0.00 0.00 0.00 1.00 -0.10 -0.20 -0.30 -0.40 -0.50 -0.60 -0.70
0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 1.00 -0.00 -0.00 -0.00 -0.00 -0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 2.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 3.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 4.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00
Actual:
1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 1.00 1.10 1.20
0.00 1.00 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0.10 0.11
0.00 0.00 1.00 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.01
0.00 0.00 0.00 1.00 -1.00 -2.00 -3.00 -4.00 -5.00 -6.00 -7.00 -8.00
0.00 0.00 0.00 0.00 1.00 -0.10 -0.20 -0.30 -0.40 -0.50 -0.60 -0.70
0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 1.00 -0.00 -0.00 -0.00 -0.00 -0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 2.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 3.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 4.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00
Success!
==================================================
==================================================
Performing SILHS category test
==================================================
Success!
Performing hydrometeor mu and sigma values unit test
====================================================
PDF parameter set 1:
hmm = 2.0000000000000002E-005
mixt_frac = 2.7000000000000000E-002
precip_frac = 8.0000000000000002E-002
precip_frac_1 = 1.0000000000000000
precip_frac_2 = 5.4470709146968145E-002
hmp2_ip_on_hmm2_ip = 3.6000000000000001
hmm_ip = 2.5000000000000001E-004
hmp2 = 2.2599999999999997E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 2:
hmm = 5.0000000000000004E-006
mixt_frac = 0.50000000000000000
precip_frac = 0.50000000000000000
precip_frac_1 = 0.50000000000000000
precip_frac_2 = 0.50000000000000000
hmp2_ip_on_hmm2_ip = 1.0000000000000000
hmm_ip = 1.0000000000000001E-005
hmp2 = 7.5000000000000012E-011
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 3:
hmm = 1.0000000000000000E-010
mixt_frac = 0.25000000000000000
precip_frac = 0.40000000000000002
precip_frac_1 = 0.75000000000000000
precip_frac_2 = 0.28333333333333338
hmp2_ip_on_hmm2_ip = 0.50000000000000000
hmm_ip = 2.5000000000000002E-010
hmp2 = 2.7500000000000010E-020
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 4:
hmm = 4.0000000000000003E-005
mixt_frac = 1.0000000000000000E-002
precip_frac = 0.10000000000000001
precip_frac_1 = 1.0000000000000000E-002
precip_frac_2 = 0.10090909090909091
hmp2_ip_on_hmm2_ip = 2.5000000000000000
hmm_ip = 4.0000000000000002E-004
hmp2 = 5.4400000000000004E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 5:
hmm = 4.0000000000000003E-005
mixt_frac = 0.98999999999999999
precip_frac = 0.10000000000000001
precip_frac_1 = 0.10090909090909091
precip_frac_2 = 1.0000000000000278E-002
hmp2_ip_on_hmm2_ip = 2.5000000000000000
hmm_ip = 4.0000000000000002E-004
hmp2 = 5.4400000000000004E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 6:
hmm = 1.0000000000000001E-005
mixt_frac = 0.12500000000000000
precip_frac = 1.0000000000000000
precip_frac_1 = 1.0000000000000000
precip_frac_2 = 1.0000000000000000
hmp2_ip_on_hmm2_ip = 1.5000000000000000
hmm_ip = 1.0000000000000001E-005
hmp2 = 1.5000000000000005E-010
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 7:
hmm = 6.0000000000000002E-005
mixt_frac = 5.0000000000000003E-002
precip_frac = 0.11000000000000000
precip_frac_1 = 0.90000000000000002
precip_frac_2 = 6.8421052631578952E-002
hmp2_ip_on_hmm2_ip = 5.0000000000000000
hmm_ip = 5.4545454545454548E-004
hmp2 = 1.9276363636363637E-007
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 8:
hmm = 7.9999999999999996E-007
mixt_frac = 0.80000000000000004
precip_frac = 0.25000000000000000
precip_frac_1 = 0.10000000000000001
precip_frac_2 = 0.85000000000000009
hmp2_ip_on_hmm2_ip = 0.75000000000000000
hmm_ip = 3.1999999999999999E-006
hmp2 = 3.8399999999999998E-012
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 9:
hmm = 1.3499999999999999E-005
mixt_frac = 0.10000000000000001
precip_frac = 0.10000000000000001
precip_frac_1 = 0.50000000000000000
precip_frac_2 = 5.5555555555555559E-002
hmp2_ip_on_hmm2_ip = 2.0000000000000000
hmm_ip = 1.3499999999999997E-004
hmp2 = 5.2852499999999985E-009
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 10 (randomly generated):
Random seed values = 2026 6 25 -300 11 29 5 321
hmm = 2.4553410857589931E-005
mixt_frac = 0.12501563520853082
precip_frac = 0.38848481337762436
precip_frac_1 = 0.27422588152515598
precip_frac_2 = 0.40480985130808939
hmp2_ip_on_hmm2_ip = 2.4937177800160244
hmm_ip = 6.3203013379374836E-005
hmp2 = 4.8188543972676106E-009
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Checking values with precipitation in 1st PDF component only.
Checking values with precipitation in 2nd PDF component only.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for ADG1
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 10 (randomly generated):
Random seed values = 2026 6 25 -300 11 29 5 322
wm = -2.8931782848201415E-002
rtm = 3.3472578613985950E-003
thlm = 296.02226025448772
wp2 = 0.26689482978246348
rtp2 = 1.2461768171826092E-006
thlp2 = 2.6783286139172429
Skw = 2.0738176044441694
wp3 = 0.28594387487875539
Skrt = 4.2038761288294015
rtp3 = 5.8481622391155721E-009
Skthl = -1.4132697352518884
thlp3 = -6.1947081512029971
wprtp = 6.4304444674717878E-005
wpthlp = -0.74033895522909010
rtpthlp = -1.6442364587379167E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
Running ADG1 expected-failure tests.
ADG1_w_closure correctly failed when given wp2 = 0.
ADG1_pdf_driver correctly failed when given thlp2 = 0.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for LY93
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 10 (randomly generated):
Random seed values = 2026 6 25 -300 11 29 5 322
wm = -2.8931782848201415E-002
rtm = 3.3472578613985950E-003
thlm = 296.02226025448772
wp2 = 0.26689482978246348
rtp2 = 1.2461768171826092E-006
thlp2 = 2.6783286139172429
Skw = 2.0738176044441694
wp3 = 0.28594387487875539
Skrt = 4.2038761288294015
rtp3 = 5.8481622391155721E-009
Skthl = -1.4132697352518884
thlp3 = -6.1947081512029971
wprtp = 6.4304444674717878E-005
wpthlp = -0.74033895522909010
rtpthlp = -1.6442364587379167E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for TSDADG
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
PDF parameter set 10 (randomly generated):
Random seed values = 2026 6 25 -300 11 29 5 323
wm = -2.8931782848201415E-002
rtm = 3.3472578613986019E-003
thlm = 296.02226025448772
wp2 = 0.26689482974153600
rtp2 = 1.2769498936877110E-006
thlp2 = 2.6783446441842780
Skw = 2.1727428377001425
wp3 = 0.29958396758361583
Skrt = 1.5320494082233242
rtp3 = 2.2107190613559314E-009
Skthl = 1.3574578891232596
thlp3 = 5.9501245484401180
wprtp = -2.8473264608450870E-004
wpthlp = -0.56120238279797352
rtpthlp = 1.6644190115492649E-003
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for the new PDF
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 10 (randomly generated):
Random seed values = 2026 6 25 -300 11 29 5 328
wm = -2.8931782848201415E-002
rtm = 3.3472578613985330E-003
thlm = 296.02226025448778
wp2 = 0.26689483019173799
rtp2 = 1.5539075803992981E-006
thlp2 = 2.6782314245221421
Skw = 1.4810386855233189
wp3 = 0.20420983053208455
Skrt = 0.54733644804572101
rtp3 = 1.0602106133290827E-009
Skthl = -0.14300994024313685
thlp3 = -0.62681355171333142
wprtp = 3.6069893298365681E-004
wpthlp = -0.79546210490793046
rtpthlp = -1.8360273775815926E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for the new hybrid PDF
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 10 (randomly generated):
Random seed values = 2026 6 25 -300 11 29 5 329
wm = -2.8931782848201415E-002
rtm = 3.3472578613985395E-003
thlm = 296.02226025448778
wp2 = 0.26689483015081039
rtp2 = 1.5846806569043997E-006
thlp2 = 2.6782474547891768
Skw = 1.5799639187792920
wp3 = 0.21784992328712030
Skrt = -0.43699027256035627
rtp3 = -8.7173484284785371E-010
Skthl = 2.6277176841320102
thlp3 = 11.517408086633287
wprtp = -2.5452286048777275E-005
wpthlp = -0.29927972047646301
rtpthlp = 1.8541238411083434E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
Success!
Performing spurious source unit test
====================================
Test 1
Vertical integral of <rt> before advance_xm_wpxp = 28.316670259590918
Vertical integral of <rt> after advance_xm_wpxp = 28.454761250379857
Vertical integral of <rt> forcing = -3.9696697370157397E-005
Flux of <rt> at the surface = 5.0000000000000001E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -4.6159907493570351E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 793918.42642888101
Vertical integral of <thl> after advance_xm_wpxp = 793908.03522151231
Vertical integral of <thl> forcing = -4.4637357896125940E-002
Flux of <thl> at the surface = 1.0000000000000000E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = 4.7534892688716468E-013
The spurious source of <thl> is within acceptable limits.
Test 2
Vertical integral of <rt> before advance_xm_wpxp = 34.981831562982734
Vertical integral of <rt> after advance_xm_wpxp = 35.201925668910661
Vertical integral of <rt> forcing = -4.1637926844659250E-005
Flux of <rt> at the surface = 7.7528494660435653E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = 6.0491704961113113E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 796068.41250793112
Vertical integral of <thl> after advance_xm_wpxp = 796058.32460795366
Vertical integral of <thl> forcing = -4.9132032189047048E-002
Flux of <thl> at the surface = 1.5505698932087131E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -1.2324447018485785E-012
The spurious source of <thl> is within acceptable limits.
Test 3
Vertical integral of <rt> before advance_xm_wpxp = 22.772592216132182
Vertical integral of <rt> after advance_xm_wpxp = 22.925154693288192
Vertical integral of <rt> forcing = -3.7349631988730091E-005
Flux of <rt> at the surface = 5.4589122250880897E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -4.4370973908969269E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 793879.76019815460
Vertical integral of <thl> after advance_xm_wpxp = 793873.79177735979
Vertical integral of <thl> forcing = -3.0812560431846887E-002
Flux of <thl> at the surface = 1.0917824450176179E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -1.0484807466681900E-012
The spurious source of <thl> is within acceptable limits.
Test 4
Vertical integral of <rt> before advance_xm_wpxp = 40.544542840064054
Vertical integral of <rt> after advance_xm_wpxp = 40.697597644006791
Vertical integral of <rt> forcing = -6.6312543372003572E-005
Flux of <rt> at the surface = 5.7649522318122546E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -9.7551090469383261E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 800345.75025339541
Vertical integral of <thl> after advance_xm_wpxp = 800328.28885171458
Vertical integral of <thl> forcing = -6.9734576732876322E-002
Flux of <thl> at the surface = 1.1529904463624509E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -1.9372004000928200E-013
The spurious source of <thl> is within acceptable limits.
Test 5
Vertical integral of <rt> before advance_xm_wpxp = 25.600351054888684
Vertical integral of <rt> after advance_xm_wpxp = 25.683148231005372
Vertical integral of <rt> forcing = -3.2473173563629444E-005
Flux of <rt> at the surface = 3.0846376061920134E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = 5.6710549884569916E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 793429.68572552456
Vertical integral of <thl> after advance_xm_wpxp = 793418.24335115810
Vertical integral of <thl> forcing = -4.4310523100319937E-002
Flux of <thl> at the surface = 6.1692752123840271E-003
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -2.3737956045266628E-013
The spurious source of <thl> is within acceptable limits.
Success!
Running tuner tests
-------------------
goldstein_price pass
rastrigin pass
himmelblau pass
eggholder pass
schaffer pass
==================================================
Performing 'mean vertical velocity in clouds' tests
Success!
==================================================
==================================================
Performing 'Smooth Heaviside Peskin' tests
Case 1: heaviside_smth_range = 0, smooth Heaviside collapses to Heaviside
Input: -1.0000000000000000 -1.0000000000000000E-010 1.0000000000000000E-010 1.0000000000000000
Expected outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000 1.0000000000000000
True outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000 1.0000000000000000
Case 2: heaviside_smth_range = 2.0000000000000000
Input: -2.0000000001000000 -1.0000000000000000 1.0000000000000000 2.0000000001000000
Expected outcome: 0.0000000000000000 9.0845056908100005E-002 0.90915494309000000 1.0000000000000000
True outcome: 0.0000000000000000 9.0845056909999999E-002 0.90915494309000000 1.0000000000000000
Success!
==================================================
==================================================
Performing 'Smooth Min / Max' tests
Input: -1.0000000000000000 -1.0000000000000000E-010 1.0000000000000000E-010 1.0000000000000000
(Simple) min:
Expected outcome: -1.0000000000000000 -1.0000000000000000E-010 0.0000000000000000 0.0000000000000000
True outcome: -1.0000000000000000 -1.0000000000000000E-010 0.0000000000000000 0.0000000000000000
(Simple) max:
Expected outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000E-010 1.0000000000000000
True outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000E-010 1.0000000000000000
Input: -2.0000000001000000 -1.0000000000000000 1.0000000000000000 2.0000000001000000
Smooth min:
Expected outcome: -2.2247448714824141 -1.3660254037844388 -0.36602540378443871 -0.22474487138241406
True outcome: -2.2247448714824136 -1.3660254037844388 -0.36602540378443871 -0.22474487138241384
Smooth max:
Expected outcome: 0.22474487138241406 0.36602540378443871 1.3660254037844388 2.2247448714824141
True outcome: 0.22474487138241384 0.36602540378443871 1.3660254037844388 2.2247448714824136
Testing smooth min and max with min_max_smth_mag=1e-7, input_var1 = equidistant grid on [-1, 1), input_var2 = 0
Input: 1.0000000000000000 10.000000000000000 100.00000000000000 1000.0000000000000
Smooth min:
Expected outcome: -1.1180339887498949 -1.0226805085936306 -1.0024751868658441 -1.0002497501874359
True outcome: -1.1180339887498949 -1.0226805085936306 -1.0024751868658441 -1.0002497501874359
Smooth max:
Expected outcome: 1.1180339887498949 1.0226805085936306 1.0024751868658441 1.0002497501874359
True outcome: 1.1180339887498949 1.0226805085936306 1.0024751868658441 1.0002497501874359
Fatal error in CLUBB - MPI Process 1 / Chunk index 1
Column index not available. Latitude/Longitude for column 1: ******/******
Latitude range from -90 to 90 degrees, Longitude range from -180 to 180 degrees
Error in ADG1_w_closure: wp2 must not be less than the w tolerance value.
Fatal error in CLUBB - MPI Process 1 / Chunk index 1
Column index not available. Latitude/Longitude for column 1: ******/******
Latitude range from -90 to 90 degrees, Longitude range from -180 to 180 degrees
Error in ADG1_ADG2_responder_params: xp2 must not be less than its tolerance value.
Input_var1: -1000000.0000000000 -10000000.000000000 -100000000.00000000 -1000000000.0000000
Input_var2: 1.0000000000000000 10.000000000000000 100.00000000000000 1000.0000000000000
Smooth min:
Expected outcome: -1000000.0000002501 -10000000.000000026 -100000000.00000000 -1000000000.0000000
True outcome: -1000000.0000002501 -10000000.000000026 -100000000.00000000 -1000000000.0000000
Smooth max:
Expected outcome: 1.0000002500019036 10.000000025145710 100.00000000000000 1000.0000000000000
True outcome: 1.0000002500019036 10.000000025145710 100.00000000000000 1000.0000000000000
Input_var1: -1000000.0000000000
Input_var2: 1.0000000000000000
Smooth min:
Expected outcome: -1000000.0000002501
True outcome: -1000000.0000002501
Smooth max:
Expected outcome: 1.0000002500019036
True outcome: 1.0000002500019036
Success!
==================================================
====================== Running fill holes tests ======================
-------------- easy_fill_test --------------
--- Testing fill type: global ---
--- Testing fill type: sliding_window ---
--- Testing fill type: widening_windows ---
--- Testing fill type: smart_window ---
--- Testing fill type: smart_window_smooth ---
--- Testing fill type: parallel ---
PASS: easy_fill_test
-----------------------------------------------
-------------- below_thresh_test --------------
--- Testing fill type: global ---
--- Testing fill type: sliding_window ---
--- Testing fill type: widening_windows ---
--- Testing fill type: smart_window ---
--- Testing fill type: smart_window_smooth ---
--- Testing fill type: parallel ---
PASS: below_thresh_test
-----------------------------------------------
====================== End fill holes tests ======================
Running /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test_branch/install/latest/G_unit_tests ...
All tests have succeeded.
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Declarative: Post Actions)
[Pipeline] script
[Pipeline] {
[Pipeline] }
[Pipeline] // script
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
[Pipeline] // node
[Pipeline] End of Pipeline
Finished: SUCCESS
