Skipping 129 KB..
Full LogTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTest
+, cirho , o3mix , ts , cldamt
---------------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [CLDMAX]
+, cldmax , b1 , b2 , b3
-------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B1]
+, cldmax , b1 , b2 , b3
--------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B2]
+, cldmax , b1 , b2 , b3
----------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_lwr.F(23): remark #7712: This variable has not been used. [B3]
+, cldmax , b1 , b2 , b3
-------------------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_lwr.F(24): remark #7712: This variable has not been used. [B4]
+, b4 , umco2 , umch4 , umn2o
-----------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/COAMPS_microphys/tgqi.F(1): remark #7712: This variable has not been used. [CIMASS]
subroutine tgqi(fallv,qi,rbm,pr,conci,pcut,p00,cimass,dmax,len)
-----------------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/COAMPS_microphys/tgqi.F(33): remark #7712: This variable has not been used. [FALSPD]
real falspd
-----------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/COAMPS_microphys/tgqs.F(45): warning #8889: Explicit interface or EXTERNAL declaration is required. [GAMMA]
call gamma(garg,tvs1)
-----------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/COAMPS_microphys/tgqs.F(31): remark #7712: This variable has not been used. [PFACT]
real pfact
-----------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/COAMPS_microphys/tgqs.F(33): remark #7712: This variable has not been used. [X6]
real x6
-----------^
Scanning dependencies of target silhs_lib
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/COAMPS_microphys/tgqr.F(31): remark #7712: This variable has not been used. [K]
integer k
--------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(332): warning #8889: Explicit interface or EXTERNAL declaration is required. [RAYLE]
call rayle
--------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(341): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(349): warning #8889: Explicit interface or EXTERNAL declaration is required. [CLOUDG]
call cloudg
--------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(369): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP1]
call comscp1
-------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(393): warning #8889: Explicit interface or EXTERNAL declaration is required. [COMSCP2]
call comscp2
-----------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(402): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_SW]
call two_rt_sw
-----------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(409): warning #8889: Explicit interface or EXTERNAL declaration is required. [TWO_RT_SW]
call two_rt_sw
-----------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(26): remark #7712: This variable has not been used. [TS]
+, cirho , o3mix , ts , amu0
------------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(28): remark #7712: This variable has not been used. [CLDAMT]
+, alndr , cldamt , cldmax , umco2
---------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(28): remark #7712: This variable has not been used. [CLDMAX]
+, alndr , cldamt , cldmax , umco2
--------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(29): remark #7712: This variable has not been used. [B1]
+, umch4 , umn2o , b1 , b2
------------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(29): remark #7712: This variable has not been used. [B2]
+, umch4 , umn2o , b1 , b2
-----------------------------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B3]
+, b3 , b4 , fdsw , fdswcl
---------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/BUGSrad/bugs_swr.F(30): remark #7712: This variable has not been used. [B4]
+, b3 , b4 , fdsw , fdswcl
-------------------------------------^
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/est_kessler_microphys_module.F90.o
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/mt95.F90.o
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_arrays.F90.o
[ 73%] Linking Fortran static library libcoamps_lib.a
[ 73%] Built target coamps_lib
[ 73%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/parameters_silhs.F90.o
[ 74%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/transform_to_pdf_module.F90.o
[ 74%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/generate_uniform_sample_module.F90.o
[ 74%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/math_utilities.F90.o
[ 74%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_importance_sample_module.F90.o
[ 75%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/lh_microphys_var_covar_module.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/SILHS/silhs_importance_sample_module.F90(901): warning #5462: Global name too long, shortened from: silhs_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER to: s_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER
num_categories_in_cluster = (/ 1, 1, 1, 1, 1, 1, 1, 1 /)
------^
[ 75%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_driver_module.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/SILHS/latin_hypercube_driver_module.F90(2028): remark #7712: This variable has not been used. [K]
integer :: sample, ivar, k
-----------------------------^
[ 75%] Linking Fortran static library libbugsrad_lib.a
[ 75%] Built target bugsrad_lib
[ 75%] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_api_module.F90.o
[ 75%] Linking Fortran static library libsilhs_lib.a
[ 75%] Built target silhs_lib
Scanning dependencies of target radiation_lib
Scanning dependencies of target numerical_recipes_lib
[ 75%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/extended_atmosphere_module.F90.o
[ 75%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/cos_solar_zen_module.F90.o
[ 75%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/parameters_radiation.F90.o
[ 76%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/rad_lwsw_module.F90.o
[ 77%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrtype.f90.o
[ 77%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/enhanced_simann.F90.o
[ 77%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/quicksort.F90.o
[ 77%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nr.f90.o
[ 77%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/nrutil.f90.o
[ 77%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/bugsrad_driver.F90.o
[ 77%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/simple_rad_module.F90.o
[ 78%] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/radiation_module.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Radiation/radiation_module.F90(520): remark #7712: This variable has not been used. [STATS]
lh_sample_point_weights, hydromet, stats, icol, &
--------------------------------------------------^
[ 78%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amebsa.f90.o
[ 79%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran_state.f90.o
[ 79%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/amoeba.f90.o
[ 79%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_s.f90.o
[ 79%] Building Fortran object src/Numerical_recipes/CMakeFiles/numerical_recipes_lib.dir/ran1_v.f90.o
[ 79%] Linking Fortran static library libradiation_lib.a
[ 79%] Built target radiation_lib
[ 79%] Linking Fortran static library libnumerical_recipes_lib.a
Scanning dependencies of target input_fields_lib
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/hydrostatic_module.F90.o
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_names.F90.o
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/extrapolation.F90.o
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/stat_file_module.F90.o
[ 79%] Built target numerical_recipes_lib
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_reader.F90.o
[ 79%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_netcdf.F90.o
[ 80%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_grads.F90.o
[ 80%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/corr_varnce_input_reader.F90.o
[ 80%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_interpret.F90.o
[ 81%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/stat_file_utils.F90.o
[ 81%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/sounding.F90.o
[ 82%] Building Fortran object src/Input_fields/CMakeFiles/input_fields_lib.dir/input_fields.F90.o
[ 82%] Linking Fortran static library libinput_fields_lib.a
[ 82%] Built target input_fields_lib
Scanning dependencies of target G_unit_test_lib
Scanning dependencies of target benchmark_cases_lib
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Nc_Ncn_test.F90.o
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/KK_integrals_tests.F90.o
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/fill_holes_tests.F90.o
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/hole_filling_tests.F90.o
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/corr_cholesky_mtx_tests.F90.o
[ 82%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/mu_sigma_hm_tests.F90.o
[ 83%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/diag_ustar_module.F90.o
[ 83%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/time_dependent_input.F90.o
[ 84%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/read_corr_mtx_test.F90.o
[ 85%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/spec_hum_to_mixing_ratio.F90.o
[ 85%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/rev_direction_grid_test.F90.o
[ 85%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/wangara.F90.o
[ 85%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/silhs_category_test.F90.o
[ 85%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_heaviside_tests.F90.o
[ 86%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_min_max_tests.F90.o
[ 86%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90.o
[ 87%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/tuner_tests.F90.o
[ 87%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/w_up_in_cloud_tests.F90.o
[ 87%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/sfc_flux.F90.o
[ 87%] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/pdf_parameter_tests.F90.o
[ 87%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/bomex.F90.o
[ 88%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_nov02.F90.o
[ 88%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_oct14.F90.o
[ 88%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/jun25.F90.o
[ 89%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_a.F90.o
[ 89%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/nov11.F90.o
[ 89%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cloud_feedback.F90.o
[ 89%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cobra.F90.o
[ 89%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf01.F90.o
[ 89%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf02.F90.o
[ 90%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/ekman.F90.o
[ 90%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/fire.F90.o
[ 90%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls2.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3_night.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/ekman.F90(20): remark #7712: This variable has not been used. [Z]
subroutine ekman_sfclyr( ngrdcol, z, &
------------------------------------^
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/lba.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_b.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/neutral_case.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/rico.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/twp_ice.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_0003.F90.o
[ 91%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_3year.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_97.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/astex_a209.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex_long.F90.o
[ 92%] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/prescribe_forcings.F90.o
[ 92%] Linking Fortran static library libG_unit_test_lib.a
[ 92%] Built target G_unit_test_lib
Scanning dependencies of target G_unit_tests
[ 92%] Building Fortran object src/CMakeFiles/G_unit_tests.dir/G_unit_tests.F90.o
[ 92%] Linking Fortran static library libbenchmark_cases_lib.a
[ 92%] Linking Fortran executable G_unit_tests
[ 92%] Built target benchmark_cases_lib
[ 92%] Built target G_unit_tests
[ 92%] Linking Fortran static library libmorrison_microphys_lib.a
[ 92%] Built target morrison_microphys_lib
Scanning dependencies of target microphys_lib
[ 92%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/mixed_moment_PDF_integrals.F90.o
[ 93%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/parameters_microphys.F90.o
[ 93%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/ice_dfsn_module.F90.o
[ 93%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/cloud_sed_module.F90.o
[ 93%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/silhs_category_variance_module.F90.o
[ 93%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/gfdl_activation.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/silhs_category_variance_module.F90(18): remark #7712: This variable has not been used. [MICROPHYS_STATS_VARS_ALL]
X_mixt_comp_all_levs, microphys_stats_vars_all, &
-------------------------------------^
[ 94%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/advance_microphys_module.F90.o
[ 94%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/coamps_microphys_driver_module.F90.o
[ 95%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/morrison_microphys_module.F90.o
[ 95%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_init_cleanup.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/morrison_microphys_module.F90(20): remark #7712: This variable has not been used. [SATURATION_FORMULA]
saturation_formula, &
---------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/morrison_microphys_module.F90(21): remark #7712: This variable has not been used. [STATS]
stats, icol, &
---------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/morrison_microphys_module.F90(21): remark #7712: This variable has not been used. [ICOL]
stats, icol, &
----------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/advance_microphys_module.F90(588): remark #7712: This variable has not been used. [L_UPWIND_DIFF_SED]
l_upwind_diff_sed
--------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/advance_microphys_module.F90(728): remark #7712: This variable has not been used. [NAME_KHM]
name_hmp2, name_wp, name_khm
--------------------------^
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/pdf_hydromet_microphys_wrapper.F90.o
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/KK_microphys_module.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/KK_microphys_module.F90(43): remark #7712: This variable has not been used. [GR]
subroutine KK_local_microphys( gr, dt, nzt, & ! In
---------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Microphys/KK_microphys_module.F90(50): remark #7712: This variable has not been used. [ICOL]
stats, icol, & ! In
----------------------------------------^
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/estimate_scm_microphys_module.F90.o
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/lh_microphys_driver_module.F90.o
[ 96%] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_driver.F90.o
[ 96%] Linking Fortran static library libmicrophys_lib.a
[ 96%] Built target microphys_lib
Scanning dependencies of target clubb_driver_lib
[ 96%] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/generalized_grid_test.F90.o
[ 96%] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/soil_vegetation.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/generalized_grid_test.F90(698): remark #7712: This variable has not been used. [HM_IDX]
i, sclr, edsclr, hm_idx
-----------------------^
[ 97%] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/clubb_driver.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver.F90(2649): remark #7712: This variable has not been used. [ERR_INFO]
subroutine set_case_initial_conditions(err_info)
-----------------------------------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver.F90(4532): remark #7712: This variable has not been used. [GRID_ADAPT_IN_TIME_METHOD]
grid_adapt_in_time_method, &
----------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver.F90(4531): remark #7712: This variable has not been used. [L_ADD_DYCORE_GRID]
l_add_dycore_grid, &
----------------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver.F90(3134): remark #7712: This variable has not been used. [L_STATS_LAST]
l_stats_last
------^
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver.F90(3154): remark #7712: This variable has not been used. [RET_CODE]
ret_code, &
------^
[ 97%] Linking Fortran static library libclubb_driver_lib.a
[ 97%] Built target clubb_driver_lib
Scanning dependencies of target clubb_driver_test
[ 97%] Building Fortran object src/CMakeFiles/clubb_driver_test.dir/clubb_driver_test.F90.o
Scanning dependencies of target clubb_standalone
Scanning dependencies of target clubb_thread_test
Scanning dependencies of target clubb_tuner
[ 98%] Building Fortran object src/CMakeFiles/clubb_standalone.dir/clubb_standalone.F90.o
[ 98%] Building Fortran object src/CMakeFiles/clubb_thread_test.dir/clubb_thread_test.F90.o
[ 99%] Building Fortran object src/CMakeFiles/clubb_tuner.dir/error.F90.o
[ 99%] Linking Fortran executable clubb_thread_test
[ 99%] Linking Fortran executable clubb_standalone
[100%] Linking Fortran executable clubb_driver_test
[100%] Building Fortran object src/CMakeFiles/clubb_tuner.dir/clubb_tuner.F90.o
/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_tuner.F90(86): warning #8889: Explicit interface or EXTERNAL declaration is required. [PARAM_LOOPS_DRIVER]
call param_loops_driver( )
---------------^
[100%] Built target clubb_thread_test
[100%] Built target clubb_standalone
[100%] Built target clubb_driver_test
[100%] Linking Fortran executable clubb_tuner
[100%] Built target clubb_tuner
Install the project...
-- Install configuration: "Debug"
-- Installing: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/libclubb_driver_lib.a
-- Installing: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_tuner
-- Set runtime path of "/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_tuner" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/G_unit_tests
-- Set runtime path of "/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/G_unit_tests" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_thread_test
-- Set runtime path of "/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_thread_test" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_standalone
-- Set runtime path of "/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_standalone" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
-- Installing: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_driver_test
-- Set runtime path of "/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/install/ifx_DEBUG_PRECdouble/clubb_driver_test" to "/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt:/usr/local/spack/opt/spack/linux-pop22-skylake_avx512/oneapi-2023.2.0/netcdf-fortran-4.5.3-inkjvmgdy5ao7uwihl6lzsnlpstmyoyt/lib"
check_for_missing_threadprivate.py has begun.
File /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/error_code.F90 failed:
Missing threadprivate for:
clubb_debug_level
File /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/fill_holes.F90 failed:
Missing threadprivate for:
ret_code
File /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/sponge_layer_damping.F90 failed:
Missing threadprivate for:
uv_sponge_damp_settings
rtm_sponge_damp_settings
wp2_sponge_damp_profile
up2_vp2_sponge_damp_settings
wp2_sponge_damp_settings
thlm_sponge_damp_settings
rtm_sponge_damp_profile
wp3_sponge_damp_profile
uv_sponge_damp_profile
wp3_sponge_damp_settings
thlm_sponge_damp_profile
up2_vp2_sponge_damp_profile
File /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/corr_varnce_module.F90 failed:
Missing threadprivate for:
corr_array_n_below_def
corr_array_n_cloud_def
[91mcheck_for_missing_threadprivate.py did not pass.[0m
[91mfailedFiles = ['/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/error_code.F90', '/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/fill_holes.F90', '/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/sponge_layer_damping.F90', '/home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/corr_varnce_module.F90'][0m
[91m===============================================================
[91mTHREADPRIVATE CHECK FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/build/ifx_DEBUG_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 71 : 107 chars : write(fstderr, *) "This section ensures that everything allocated in init_clubb_case will be deallocated"
line 72 : 102 chars : write(fstderr, *) "in clean_up_clubb. This may cause a runtime error if there is a mismatch between"
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/generalized_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 3: module generalized_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/generalized_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 903 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1071 : 101 chars : rtm_ref_flip, thlm_ref_flip, um_ref_flip, vm_ref_flip, ug_flip, vg_flip, & ! Intent(in)
line 1084 : 111 chars : um_flip, vm_flip, upwp_flip, vpwp_flip, up2_flip, vp2_flip, up3_flip, vp3_flip, & ! Intent(inout)
line 1086 : 111 chars : wp2_flip, wp3_flip, rtp2_flip, rtp3_flip, thlp2_flip, thlp3_flip, rtpthlp_flip, & ! Intent(inout)
line 1092 : 109 chars : wp2rtp_flip, wp2thlp_flip, uprcp_flip, vprcp_flip, rc_coef_zm_flip, wp4_flip, & ! intent(inout)
line 1093 : 105 chars : wpup2_flip, wpvp2_flip, wp2up2_flip, wp2vp2_flip, ice_supersat_frac_flip, & ! intent(inout)
line 1582 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1609 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2up_implicit, nzt, ngrdcol, &
line 1613 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2up_explicit, nzt, ngrdcol, &
line 1617 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2vp_implicit, nzt, ngrdcol, &
line 1621 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2vp_explicit, nzt, ngrdcol, &
line 1655 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpup2_implicit, nzt, ngrdcol, &
line 1659 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpup2_explicit, nzt, ngrdcol, &
line 1663 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpvp2_implicit, nzt, ngrdcol, &
line 1667 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpvp2_explicit, nzt, ngrdcol, &
line 2471 : 105 chars : tolerance = max( 1.e-8_core_rknd, epsilon(tolerance) ) ! max statement for single precision runs
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver.F90 ---------------------
WARNING: 'use' statements without 'only' found in the following lines:
WARNING: Check that comma is on same line as 'use', as CLUBB requires.
3115 : use gptl
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_driver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 197 : 110 chars : l_modify_ic_with_cubic_int, & ! Flag for interpolating the sounding profile with Steffen's monotone cubic
line 198 : 110 chars : ! method to obtain smoother initial condition profile, which is found to be
line 199 : 111 chars : ! beneficial to achive a better numerical solution convergence. If this flag
line 200 : 118 chars : ! is turned off, the initial conditions will be generated with linear interpolation.
line 201 : 111 chars : ! This is done on a case-by-case basis, since using the monotone cubic method
line 202 : 109 chars : ! requires a special sounding.in file with many additional sounding levels.
line 203 : 109 chars : l_modify_bc_for_cnvg_test, & ! Flag to activate modifications on boundary condition for convergence test
line 738 : 101 chars : !$omp sens_ht, latent_ht, lmin, vert_decorr_coef, deep_soil_T_in_K, sfc_soil_T_in_K, veg_T_in_K, &
line 745 : 101 chars : !$omp exner, rtm, thlm, rcm, wp3, wp3_zm, delta_zm, p_in_Pa, cloud_frac, wpthvp, wp2thvp, wp2up, &
line 754 : 102 chars : !$omp rtp2_mc, thlp2_mc, rtpthlp_mc, Ncm_mc, Ncm, Nccnm, em, tau_zm, tau_zt, Kh_zt, Kh_zm, rfrzm, &
line 755 : 105 chars : !$omp rrm, Nrm, Nc_in_cloud, wpNcp, radht, Frad, Frad_SW_up, Frad_LW_up, Frad_SW_down, Frad_LW_down, &
line 756 : 102 chars : !$omp wpsclrp_sfc, wpedsclrp_sfc, sclrm, wpsclrp, sclrp2, sclrp3, sclrprtp, sclrpthlp, sclrpthvp, &
line 1017 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 1754 : 102 chars : open(unit=iunit_grid_adaptation, file=fname_grid_adaptation, status='replace', action='write')
line 2070 : 105 chars : allocate( um_ref(ngrdcol, gr%nzt) ) ! Reference u wind for nudging; Michael Falk, 17 Oct 2007
line 2071 : 105 chars : allocate( vm_ref(ngrdcol, gr%nzt) ) ! Reference v wind for nudging; Michael Falk, 17 Oct 2007
line 2510 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 2541 : 106 chars : ! Similar call to above, checking parameter values, but because we've placed this in "init_clubb_case"
line 2549 : 116 chars : write(fstderr, *) "Fatal error calling check_clubb_settings_api and/or check_parameters_api in clubb_driver"
line 2592 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 2604 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 2605 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 2608 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 2610 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 2616 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 2617 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 2618 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 2619 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 2620 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 2621 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 2622 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 2623 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 2624 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 2625 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 2734 : 103 chars : invrs_rho_ds_zt(i,k) = invrs_rho_ds_zt_init(k) ! inv. dry, static density: t-levs
line 2740 : 103 chars : um_pert(i,k) = zero ! Variables used to track perturbed version of winds.
line 2742 : 105 chars : wm_zt(i,k) = wm_zt_init(k) ! Imposed large scale w - Thermodynamic levels
line 2924 : 103 chars : open( unit=iunit_grid_adaptation+10, file=trim( output_dir ) // trim( runtype ) // '_grid.txt', &
line 2936 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 3127 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 3284 : 103 chars : um(i,:), vm(i,:), rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), &
line 3617 : 111 chars : !$acc X_nl_all_levs, X_mixt_comp_all_levs, lh_sample_point_weights, mu_x_1_n, mu_x_2_n, &
line 3619 : 104 chars : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped, &
line 3623 : 116 chars : !$acc pdf_params%cloud_frac_1, pdf_params%cloud_frac_2, pdf_params%cthl_1, pdf_params%cthl_2, &
line 3624 : 112 chars : !$acc pdf_params%crt_1, pdf_params%crt_2, pdf_params%stdev_chi_1, pdf_params%stdev_chi_2, &
line 3640 : 102 chars : wp2_zt = zm2zt_api( gr%nzm, gr%nzt, ngrdcol, gr, wp2, w_tol_sqd ) ! Positive definite quantity
line 3646 : 109 chars : thlm(i,:), p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), rtm(i,:), &! In
line 3647 : 109 chars : rcm(i,:), cloud_frac(i,:), wm_zt(i,:), wm_zm(i,:), wp2_zt(i,:), & ! In
line 3648 : 106 chars : hydromet(i,:,:), Nc_in_cloud(i,:), & ! In
line 3665 : 102 chars : Nccnm(i,:), & ! Inout
line 3666 : 117 chars : hydromet_mc(i,:,:), Ncm_mc(i,:), rcm_mc(i,:), rvm_mc(i,:), & ! Out
line 3667 : 107 chars : thlm_mc(i,:), hydromet_vel_zt(i,:,:), & ! Out
line 3668 : 102 chars : hydromet_vel_covar_zt_impc(i,:,:), & ! Out
line 3669 : 102 chars : hydromet_vel_covar_zt_expc(i,:,:), & ! Out
line 3670 : 110 chars : wprtp_mc(i,:), wpthlp_mc(i,:), rtp2_mc(i,:), & ! Out
line 3671 : 105 chars : thlp2_mc(i,:), rtpthlp_mc(i,:) ) ! Out
line 3695 : 103 chars : stats, i, & ! Inout
line 3696 : 103 chars : hydromet(i,:,:), hydromet_vel_zt(i,:,:), hydrometp2(i,:,:), & ! Inout
line 3697 : 103 chars : K_hm(i,:,:), Ncm(i,:), Nc_in_cloud(i,:), rvm_mc(i,:), & ! Inout
line 3698 : 103 chars : thlm_mc(i,:), err_info, & ! Inout
line 3699 : 101 chars : wphydrometp(i,:,:), wpNcp(i,:) ) ! Out
line 3708 : 106 chars : !$acc update device( rcm_mc, rvm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3761 : 104 chars : !$acc update host( rvm_mc, rcm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3788 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, X_nl_all_levs, &
line 3814 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, thlm, rtm, rcm )
line 3915 : 112 chars : call stats_update( "brunt_term_time_avg", richardson_num_term_weight*richardson_num_term_time_avg, &
line 3941 : 101 chars : .and. stats%l_last_sample ) then ! only adapt grid when the average of the last
line 4070 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_scheme = ', time_microphys_scheme
line 4071 : 104 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_advance = ', time_microphys_advance
line 4190 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 4202 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 4203 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 4206 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 4208 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 4214 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 4215 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 4216 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 4217 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 4218 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 4219 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 4220 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 4221 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 4222 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 4223 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 4245 : 119 chars : if ( thlm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( thlm_sponge_damp_profile )
line 4246 : 118 chars : if ( rtm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( rtm_sponge_damp_profile )
line 4247 : 117 chars : if ( uv_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( uv_sponge_damp_profile )
line 4248 : 118 chars : if ( wp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp2_sponge_damp_profile )
line 4249 : 118 chars : if ( wp3_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp3_sponge_damp_profile )
line 4250 : 122 chars : if ( up2_vp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( up2_vp2_sponge_damp_profile )
line 4937 : 104 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 4945 : 106 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 4959 : 101 chars : 'be used for cases with forcings from an input file and for the atex ', &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/clubb_tuner.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 654 : 102 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/advance_wp2_wp3_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 928 : 101 chars : stats, & ! intent(inout)
line 1742 : 105 chars : stats_tmp_zt(i,k) = - gamma_over_implicit_ts * wp3_term_ta_lhs_result(5,i,k) * wp3(i,k-1) &
line 1743 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(4,i,k) * wp2(i,k) &
line 1744 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(3,i,k) * wp3(i,k) &
line 1745 : 105 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(2,i,k) * wp2(i,k+1) &
line 1746 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(1,i,k) * wp3(i,k+1)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/sfc_varnce_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 723 : 105 chars : call sfc_varnce_check( sclr_dim, wp2(i,gr%k_lb_zm), up2(i,gr%k_lb_zm), & ! intent(in)
line 724 : 105 chars : vp2(i,gr%k_lb_zm), thlp2(i,gr%k_lb_zm), rtp2(i,gr%k_lb_zm), & ! intent(in)
line 725 : 105 chars : rtpthlp(i,gr%k_lb_zm), sclrp2(i,gr%k_lb_zm,:), & ! intent(in)
line 726 : 105 chars : sclrprtp(i,gr%k_lb_zm,:), sclrpthlp(i,gr%k_lb_zm,:), & ! intent(in)
line 727 : 108 chars : err_info ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/clubb_api_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2430 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
line 2497 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/fill_holes.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 234 : 113 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 240 : 105 chars : write(fstderr, *) "column", i, " field average = ", sum(field(i,:) * rho_ds(i,:) * dz(i,:)) &
line 584 : 102 chars : ! rho_ds_dz(i,k-num_hf_draw_points:k+num_hf_draw_points))
line 823 : 110 chars : * min( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 828 : 106 chars : + mass_fraction * ( min( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
line 833 : 110 chars : * max( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 840 : 108 chars : + mass_fraction * ( max( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 4: module err_info_type_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 265 : 102 chars : write(err_info%err_header_global,'(A38, I3, A15, I3, A, A28, A33, F6.2, A1, F6.2, A, A39, A40)') &
line 276 : 105 chars : write(err_info%err_header(i),'(A38, I3, A15, I3, A, A22, I2, A11, F6.2, A13, F6.2, A, A39, A40)') &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/mono_flux_limiter.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 700 : 104 chars : !$acc parallel loop gang vector collapse(2) default(present) reduction(.or.:l_any_adjustment_needed)
line 851 : 121 chars : ! MONOFLUX TEST COMMENT DO NOT REMOVE if( any(wpxp_net_adjust /= 0.0) ) write(fstderr,*) "MONOFLUX: wpxp adjusted "
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/parameters_tunable.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 839 : 106 chars : / sqrt( 4.0_core_rknd * ( 1.0_core_rknd - 0.4_core_rknd )**3 &
line 840 : 118 chars : + clubb_params(ngrdcol,iSkw_max_mag)**2 ) ) ) ! Known magic number
line 902 : 117 chars : mult_factor_zt(i) = 1.0_core_rknd + clubb_params(i,imult_coef) * log( avg_deltaz(i) / grid_spacing_thresh )
line 917 : 104 chars : nu_vert_res_dep%nu10(i) = clubb_params(i,inu10) * mult_factor_zt(i) !We're unsure of the grid
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/advance_clubb_core_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1876 : 101 chars : stats, & ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/pdf_parameter_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 101 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 298 : 102 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 300 : 101 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/advance_windm_edsclrm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 493 : 102 chars : stats ) ! intent(inout)
line 501 : 102 chars : stats ) ! intent(inout)
line 953 : 103 chars : call windm_edsclrm_rhs( nzm, nzt, ngrdcol, gr, windm_edsclrm_scalar, dt, & ! intent(in)
line 954 : 103 chars : lhs_diff, edsclrm(:,:,edsclr), & ! intent(in)
line 955 : 103 chars : edsclrm_forcing(:,:,edsclr), & ! intent(in)
line 956 : 103 chars : rho_ds_zm, invrs_rho_ds_zt, & ! intent(in)
line 957 : 103 chars : l_imp_sfc_momentum_flux, wpedsclrp(:,gr%k_lb_zm,edsclr), & ! intent(in)
line 958 : 106 chars : stats, & ! intent(inout)
line 959 : 104 chars : rhs(:,:,edsclr) ) ! intent(out)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/grid_adaptation_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 128 chars : write(fstderr, *) "The fixed minimum grid density momentum heights need to cover at least the domain of the physics grid."
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/stats_netcdf.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 281: subroutine stats_init_api( registry_path, output_path, ncol, stats_tsamp, stats_tout, dt_main, &
line 489: subroutine stats_finalize_api( stats, err_info )
line 565: subroutine stats_type_initialize( ncol, defs, ndefs, zt, zm, stats, ierr, rad_zt, rad_zm )
line 716: subroutine stats_open_netcdf( output_path, time_units, &
line 951: subroutine stats_begin_timestep_api( itime, stats )
line 1001: subroutine stats_end_timestep_api( time_value, stats, err_info )
line 1052: subroutine stats_update_scalar( name, values, stats, icol, level )
line 1112: subroutine stats_update_1d( name, values, stats, icol, level )
line 1172: subroutine stats_update_2d( name, values, stats, icol, level )
line 1235: subroutine stats_begin_budget_scalar( name, values, stats, icol )
line 1281: subroutine stats_begin_budget_1d( name, values, stats, icol )
line 1334: subroutine stats_begin_budget_2d( name, values, stats, icol )
line 1379: subroutine stats_update_budget_scalar( name, values, stats, icol, level )
line 1429: subroutine stats_update_budget_1d( name, values, stats, icol, level )
line 1479: subroutine stats_update_budget_2d( name, values, stats, icol, level )
line 1524: subroutine stats_finalize_budget_scalar( name, values, stats, icol, l_count_sample )
line 1590: subroutine stats_finalize_budget_1d( name, values, stats, icol, l_count_sample )
line 1663: subroutine stats_finalize_budget_2d( name, values, stats, icol, l_count_sample )
line 1729: subroutine stats_avg_and_write( time_value, stats, ierr )
line 1855: subroutine stats_grid_init( ncol, zt_src, zm_src, zt_tgt, zm_tgt, &
line 1917: subroutine stats_update_grid( zt_src, zm_src, rho_vals, rho_levels, p_sfc, stats )
line 1995: subroutine stats_lh_samples_init( num_samples, nzt, nl_var_names, u_var_names, zt_vals, &
line 2114: subroutine stats_lh_samples_write_lognormal( samples, stats, err_info )
line 2167: subroutine stats_lh_samples_write_uniform( uniform_vals, mixture_comp, sample_weights, &
line 2383: subroutine stats_lookup_append( stats, id )
line 2425: subroutine stats_lookup_reject_append( stats, name )
line 2539: subroutine stats_read_registry_namelist( path, defs, ndefs, ierr )
line 2614: subroutine stats_expand_registry( sclr_dim, edsclr_dim, defs, ndefs, hydromet_list )
line 2915: subroutine add_expanded_def( base_def, name, out_defs, nout )
line 2965: subroutine parse_registry_line( line, def, l_valid )
line 3039: subroutine split_registry_fields( line, fields, nfields )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/stats_netcdf.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 235 : 103 chars : logical :: l_last_sample = .false. ! True if we want to output at the end of this sample
line 237 : 104 chars : logical :: l_different_output_grid = .false. ! True if we need to remap the variables before output
line 238 : 102 chars : logical :: l_output_rad_files = .false. ! True if we want to output radiation grid variables
line 526 : 101 chars : if ( allocated( stats%grid%rho_lin_spline_vals ) ) deallocate( stats%grid%rho_lin_spline_vals )
line 527 : 105 chars : if ( allocated( stats%grid%rho_lin_spline_levels ) ) deallocate( stats%grid%rho_lin_spline_levels )
line 803 : 104 chars : ret_code = nf90_def_var( stats%ncid, "time", NF90_DOUBLE, (/ stats%time_dimid /), stats%time_varid )
line 808 : 101 chars : ret_code = nf90_def_var( stats%ncid, "col", NF90_DOUBLE, (/ stats%col_dimid /), stats%col_varid )
line 828 : 121 chars : ret_code = nf90_def_var( stats%ncid, "lh_zt", NF90_DOUBLE, (/ stats%lh_2d%lh_zt_dimid /), stats%lh_2d%lh_zt_varid )
line 835 : 112 chars : ret_code = nf90_def_var( stats%ncid, "rad_zt", NF90_DOUBLE, (/ stats%rad_zt_dimid /), stats%rad_zt_varid )
line 839 : 112 chars : ret_code = nf90_def_var( stats%ncid, "rad_zm", NF90_DOUBLE, (/ stats%rad_zm_dimid /), stats%rad_zm_varid )
line 849 : 101 chars : (/ stats%param_strlen_dimid, stats%param_dimid /), stats%param_name_varid )
line 852 : 109 chars : ret_code = nf90_def_var( stats%ncid, "param", NF90_DOUBLE, (/ stats%param_dimid /), stats%param_varid )
line 912 : 110 chars : ret_code = nf90_put_att( stats%ncid, stats%vars(i)%varid, "long_name", trim( stats%vars(i)%long_name ) )
line 913 : 102 chars : ret_code = nf90_put_att( stats%ncid, stats%vars(i)%varid, "units", trim( stats%vars(i)%units ) )
line 920 : 108 chars : ret_code = nf90_put_var( stats%ncid, stats%col_varid, [( real( i, kind=core_rknd ), i=1, stats%ncol )] )
line 940 : 109 chars : ret_code = nf90_put_var( stats%ncid, stats%param_varid, [( real( i, kind=core_rknd ), i=1, nparams )] )
line 1815 : 101 chars : stats%grid%gr_source, stats%grid%gr_output, stats%vars(i)%nz, &
line 1816 : 107 chars : real( stats%vars(i)%buffer, kind=core_rknd ), stats%vars(i)%out_nz, &
line 1817 : 114 chars : size( stats%grid%rho_lin_spline_vals, 2 ), stats%grid%rho_lin_spline_vals, &
line 1973 : 101 chars : if ( allocated( stats%grid%rho_lin_spline_vals ) ) deallocate( stats%grid%rho_lin_spline_vals )
line 1974 : 105 chars : if ( allocated( stats%grid%rho_lin_spline_levels ) ) deallocate( stats%grid%rho_lin_spline_levels )
line 2416 : 116 chars : if ( stats%lookup%cache_len > 0 ) tmp(1:stats%lookup%cache_len) = stats%lookup%cache(1:stats%lookup%cache_len)
line 2461 : 105 chars : tmp(1:stats%lookup%reject_cache_len) = stats%lookup%reject_cache(1:stats%lookup%reject_cache_len)
line 2528 : 101 chars : write(date(32:33),'(i2.2)') nint( ( ( real( mod( nint( st_time ),3600 ),kind=time_precision ) / &
line 2605 : 101 chars : write( fstderr,* ) "Invalid stats registry entry (expected: name | grid | units | long_name)"
line 2706 : 101 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2707 : 101 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2714 : 101 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2715 : 101 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2722 : 101 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2723 : 101 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2730 : 113 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_1", &
line 2734 : 113 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_2", &
line 2740 : 101 chars : call add_expanded_def(base_def,"corr_w_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2741 : 101 chars : call add_expanded_def(base_def,"corr_w_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2748 : 103 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2749 : 103 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2756 : 103 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2757 : 103 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2764 : 103 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2765 : 103 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2772 : 115 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_1_n", &
line 2776 : 115 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_2_n", &
line 2813 : 112 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"p", &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/advance_xp2_xpyp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1320 : 101 chars : sclrprtp(:,:,sclr) ) ! Intent(inout)
line 1353 : 102 chars : sclrpthlp(:,:,sclr) ) ! Intent(inout)
line 3042 : 101 chars : stats_tmp(i,k) = (-gamma_over_implicit_ts * lhs_ta(2+gr%grid_dir_indx,i,k)) * xapxbp(i,km1) &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/setup_clubb_pdf_params.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 55 : 104 chars : subroutine setup_pdf_parameters_api( gr, nzm, nzt, ngrdcol, pdf_dim, hydromet_dim, dt, & ! Intent(in)
line 3823 : 104 chars : ! Correlation (in-precip) of chi (old s) and the precipitating hydrometeor in PDF component 1.
line 3827 : 104 chars : ! Correlation (in-precip) of chi (old s) and the precipitating hydrometeor in PDF component 2.
line 3841 : 104 chars : ! Correlation (in-precip) of eta (old t) and the precipitating hydrometeor in PDF component 1.
line 3845 : 104 chars : ! Correlation (in-precip) of eta (old t) and the precipitating hydrometeor in PDF component 2.
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/model_flags.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 315 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 541 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 845 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/advance_xm_wpxp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 779 : 101 chars : call wpxp_term_pr1_lhs( nzm, ngrdcol, gr, C6rt_Skw_fnc, C6thl_Skw_fnc, C7_Skw_fnc, & ! Intent(in)
line 780 : 101 chars : invrs_tau_C6_zm, l_scalar_calc, & ! Intent(in)
line 781 : 102 chars : lhs_pr1_wprtp, lhs_pr1_wpthlp, lhs_pr1_wpsclrp ) ! Intent(out)
line 854 : 102 chars : stats, & ! InOut
line 855 : 101 chars : rtm, wprtp, thlm, wpthlp, sclrm, wpsclrp, & ! InOut
line 856 : 101 chars : err_info ) ! InOut
line 896 : 101 chars : stats, & ! InOut
line 4881 : 108 chars : tmp_zm_stats(i,k) = (-gamma_over_implicit_ts*lhs_ta_wpxp(2+gr%grid_dir_indx,i,k)) * wpxp(i,km1) &
line 4883 : 105 chars : + (-gamma_over_implicit_ts*lhs_ta_wpxp(2-gr%grid_dir_indx,i,k)) * wpxp(i,kp1)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/stats_clubb_utilities.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 129 : 101 chars : wp2_zt, thlp2_zt, wpthlp_zt, wprtp_zt, rtp2_zt, rtpthlp_zt, up2_zt, vp2_zt, upwp_zt, vpwp_zt, &
line 130 : 101 chars : wpup2, wpvp2, a3_coef_zt, wp3_on_wp2_zt, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/CLUBB_core/penta_bicgstab_solver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 419 : 110 chars : ! It's interesting to see how close E_inv is to the lhs diagonal, it's usually (visually) very close, but
line 420 : 104 chars : ! using it instead of E_inv requires so many more iterations (use it would be jacobi preconditioner)
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 20 check(s) failed.
CLUBBStandardsCheck.py has begun.
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/SILHS/mt95.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 362: subroutine init_by_type( put, get )
line 382: subroutine init_by_scalar( put )
line 413: subroutine init_by_array( put )
line 461: subroutine next_state( )
line 593: subroutine genrand_int32_0d( y )
line 614: subroutine genrand_int32_1d( y )
line 629: subroutine genrand_int32_2d( y )
line 644: subroutine genrand_int32_3d( y )
line 659: subroutine genrand_int32_4d( y )
line 674: subroutine genrand_int32_5d( y )
line 689: subroutine genrand_int32_6d( y )
line 704: subroutine genrand_int32_7d( y )
line 720: subroutine genrand_int31_0d( y )
line 732: subroutine genrand_int31_1d( y )
line 747: subroutine genrand_int31_2d( y )
line 762: subroutine genrand_int31_3d( y )
line 777: subroutine genrand_int31_4d( y )
line 792: subroutine genrand_int31_5d( y )
line 807: subroutine genrand_int31_6d( y )
line 822: subroutine genrand_int31_7d( y )
line 838: subroutine genrand_real1_0d( r )
line 853: subroutine genrand_real1_1d( r )
line 868: subroutine genrand_real1_2d( r )
line 883: subroutine genrand_real1_3d( r )
line 898: subroutine genrand_real1_4d( r )
line 913: subroutine genrand_real1_5d( r )
line 928: subroutine genrand_real1_6d( r )
line 943: subroutine genrand_real1_7d( r )
line 959: subroutine genrand_real2_0d( r )
line 974: subroutine genrand_real2_1d( r )
line 989: subroutine genrand_real2_2d( r )
line 1004: subroutine genrand_real2_3d( r )
line 1019: subroutine genrand_real2_4d( r )
line 1034: subroutine genrand_real2_5d( r )
line 1049: subroutine genrand_real2_6d( r )
line 1064: subroutine genrand_real2_7d( r )
line 1080: subroutine genrand_real3_0d( r )
line 1095: subroutine genrand_real3_1d( r )
line 1110: subroutine genrand_real3_2d( r )
line 1125: subroutine genrand_real3_3d( r )
line 1140: subroutine genrand_real3_4d( r )
line 1155: subroutine genrand_real3_5d( r )
line 1170: subroutine genrand_real3_6d( r )
line 1185: subroutine genrand_real3_7d( r )
line 1201: subroutine genrand_res53_0d( r )
line 1218: subroutine genrand_res53_1d( r )
line 1233: subroutine genrand_res53_2d( r )
line 1248: subroutine genrand_res53_3d( r )
line 1263: subroutine genrand_res53_4d( r )
line 1278: subroutine genrand_res53_5d( r )
line 1293: subroutine genrand_res53_6d( r )
line 1308: subroutine genrand_res53_7d( r )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/SILHS/latin_hypercube_driver_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 113 : 101 chars : ! The uniform distribution corresponds to all the same variables as X_nl,
line 410 : 105 chars : !$acc update host(X_u_all_levs,l_in_precip,lh_sample_point_weights,X_mixt_comp_all_levs,k_lh_start)
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 2 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/wangara.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 104 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 105 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/rico.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 159 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 160 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module prescribe_forcings_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 297 : 104 chars : !$acc enter data create( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 471 : 118 chars : !$acc update device( wm_zt, wm_zm, thlm_forcing, rtm_forcing, um_ref, vm_ref, sclrm_forcing, edsclrm_forcing )
line 911 : 103 chars : !$acc exit data delete( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 1114 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1118 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1122 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1123 : 112 chars : exner_zm(i,km1), exner_zm(i,k00), exner_zm(i,kp1), exner_zm(i,kp2) )
line 1126 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1127 : 108 chars : thlm_zm(i,km1), thlm_zm(i,k00), thlm_zm(i,kp1), thlm_zm(i,kp2) )
line 1130 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1131 : 104 chars : rtm_zm(i,km1), rtm_zm(i,k00), rtm_zm(i,kp1), rtm_zm(i,kp2) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/dycoms2_rf02.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 121 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 122 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/mpace_b.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 157 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 158 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/mpace_a.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 272 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 273 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/lba.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 96 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 97 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
line 176 : 101 chars : wpthlp_sfc(i) = convert_sens_ht_to_km_s( ( 270._core_rknd * ft**1.5_core_rknd ), rho_sfc(i) )
line 177 : 101 chars : wprtp_sfc(i) = convert_latent_ht_to_m_s( ( 554._core_rknd * ft**1.3_core_rknd ), rho_sfc(i) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/dycoms2_rf01.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 91 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 92 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/gabls2.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 152 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 153 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/Benchmark_cases/bomex.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 127 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 128 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 11 check(s) failed.
No matches for /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/KK_microphys/
CLUBBStandardsCheck.py has begun.
--------------------- Default Private Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 19: module fill_holes_tests
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 162 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 180 : 110 chars : if ( l_print_name ) print *, "filling holes of: easy_fill_test_"//trim(fill_type_names(fill_type))
line 195 : 121 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 241 : 118 chars : if ( l_print_name ) print *, "filling holes of: reverse_easy_fill_test_"//trim(fill_type_names(fill_type))
line 344 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 363 : 113 chars : if ( l_print_name ) print *, "filling holes of: below_thresh_test_"//trim(fill_type_names(fill_type))
line 385 : 103 chars : print *, "-- error", two * abs( initial_mass - new_mass ) / ( initial_mass + new_mass )
line 419 : 121 chars : if ( l_print_name ) print *, "filling holes of: reverse_below_thresh_test_"//trim(fill_type_names(fill_type))
line 430 : 116 chars : print *, "ERROR in below_thresh_test REVERSE MODE: method was not conservative in grid reverse mode"
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module rev_direction_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 233 : 113 chars : !seed used = -1102123834 1480475276 -248259584 525496705 1614213535 -1267052688 6290033 -78466652
line 234 : 127 chars : !seed_output = (/ -1102123834, 1480475276, -248259584, 525496705, 1614213535, -1267052688, 6290033, -78466652 /)
line 750 : 101 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 754 : 104 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
line 795 : 101 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 801 : 104 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/G_unit_test_types/pdf_parameter_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 550 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/src/G_unit_test_types/spurious_source_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 500 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
[91m===============================================================
[91mCLUBBStandardsCheck FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/build/ifx_DEBUG_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
[93mBuild completed successfully, but some source code checks have failed.[0m
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Lapack)
[Pipeline] sh
+ sed -i 's:penta_solve_method.*:penta_solve_method = 1:g' input/tunable_parameters/configurable_model_flags.in
[Pipeline] sh
+ sed -i 's:tridiag_solve_method.*:tridiag_solve_method = 1:g' input/tunable_parameters/configurable_model_flags.in
[Pipeline] sh
+ python3 run_scripts/run_scm_all.py -stats none -max_iters 100
Performing standard run
Using 8 process(es)
Cases to run: arm, arm_97, astex_a209, atex, bomex, cgils_s6, cgils_s11, cgils_s12, clex9_nov02, clex9_oct14, dycoms2_rf01, dycoms2_rf01_fixed_sst, dycoms2_rf02_do, dycoms2_rf02_ds, dycoms2_rf02_nd, dycoms2_rf02_so, fire, gabls2, gabls3, gabls3_night, jun25_altocu, lba, mc3e, mpace_a, mpace_b, mpace_b_silhs, nov11_altocu, rico, rico_silhs, twp_ice, wangara
COMPLETE -- bomex
COMPLETE -- cgils_s11
COMPLETE -- cgils_s12
COMPLETE -- arm
COMPLETE -- astex_a209
COMPLETE -- dycoms2_rf01_fixed_sst
COMPLETE -- atex
COMPLETE -- cgils_s6
COMPLETE -- dycoms2_rf02_nd
COMPLETE -- fire
COMPLETE -- dycoms2_rf02_so
COMPLETE -- clex9_nov02
COMPLETE -- dycoms2_rf02_do
COMPLETE -- clex9_oct14
COMPLETE -- dycoms2_rf02_ds
COMPLETE -- dycoms2_rf01
COMPLETE -- gabls3_night
COMPLETE -- arm_97
COMPLETE -- jun25_altocu
ERROR -- nov11_altocu
- using executable: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/run_scripts/../install/latest/clubb_standalone
=================== Running nov11_altocu ===================
2026/03/16 11:49:19
--------------------------------------------------
Latest git log entry
--------------------------------------------------
A detailed git diff can be found at the end of this file
--------------------------------------------------
Tunable Parameters:
--------------------------------------------------
--------------------------------------------------
Preprocessing Directives:
--------------------------------------------------
-DNETCDF enabled
-DCOAMPS_MICRO enabled
-DTUNER disabled
-DSILHS enabled
-Dnooverlap enabled
-Draoffline enabled
-DUSE_BUGSrad_ocast_random disabled
-DBYTESWAP_IO disabled
--------------------------------------------------
&model_setting
--------------------------------------------------
runtype = nov11_altocu
nzmax = 176
grid_type = 1
deltaz = 25.0000000000000
zm_init = 3000.00000000000
zm_top = 7541.00000000000
zt_grid_fname =
zm_grid_fname =
day = 11
month = 11
year = 1999
lat_vals = 47.2500000000000
lon_vals = -112.000000000000
sfc_elevation = 0.000000000000000E+000
time_initial = 61200.0000000000
time_final = 67200.0000000000
dt_main = 60.0000000000000
dt_rad = 60.0000000000000
sfctype = 0
T_sfc = 288.000000000000
p_sfc = 69512.0000000000
sens_ht = 0.000000000000000E+000
latent_ht = 0.000000000000000E+000
fcor = 0.000000000000000E+000
fcor_y = 9.899630071699246E-005
T0 = 300.000000000000
ts_nudge = 86400.0000000000
forcings_file_path =
l_t_dependent = T
l_ignore_forcings = F
l_modify_ic_with_cubic_int = F
l_modify_bc_for_cnvg_test = F
l_input_xpwp_sfc = F
saturation_formula = 3
thlm_sponge_damp_settings%l_sponge_damping = F
rtm_sponge_damp_settings%l_sponge_damping = F
uv_sponge_damp_settings%l_sponge_damping = F
wp2_sponge_damp_settings%l_sponge_damping = F
wp3_sponge_damp_settings%l_sponge_damping = F
up2_vp2_sponge_damp_settings%l_sponge_damping = F
thlm_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
thlm_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
thlm_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
rtm_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
rtm_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
rtm_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
uv_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
uv_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
uv_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
wp2_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
wp2_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
wp2_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
wp3_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
wp3_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
wp3_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
up2_vp2_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
up2_vp2_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
up2_vp2_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
l_soil_veg = F
l_restart = F
l_input_fields = F
restart_path_case = restart/nov11_altocu
time_restart = 0.000000000000000E+000
debug_level = 2
sclr_dim = 0
edsclr_dim = 0
iisclr_thl = -2
iisclr_rt = -1
iisclr_CO2 = -1
sclr_tol =
--------------------------------------------------
&stats_setting
--------------------------------------------------
l_stats = F
output_dir = /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/output/
fname_prefix = nov11_altocu
stats_fmt = netcdf
stats_tsamp = 60.0000000000000
stats_tout = 60.0000000000000
l_allow_small_stats_tout = F
Constant flags:
l_pos_def = F
l_gamma_Skw = T
l_byteswap_io = F
Constant tolerances [units]
rt_tol [kg/kg] = 1.000000000000000E-008
thl_tol [K] = 1.000000000000000E-002
w_tol [m/s] = 2.000000000000000E-002
Parameter Value
--------- -----
C1 = 1.00000000000000000000
C1b = 1.00000000000000000000
C1c = 1.00000000000000000000
C2rt = 2.00000000000000000000
C2thl = 2.00000000000000000000
C2rtthl = 2.00000000000000000000
C4 = 2.00000000000000000000
C_uu_shr = 0.40000000000000002220
C_uu_buoy = 0.29999999999999998890
C6rt = 2.00000000000000000000
C6rtb = 2.00000000000000000000
C6rtc = 1.00000000000000000000
C6thl = 2.00000000000000000000
C6thlb = 2.00000000000000000000
C6thlc = 1.00000000000000000000
C7 = 0.50000000000000000000
C7b = 0.50000000000000000000
C7c = 0.50000000000000000000
C8 = 0.50000000000000000000
C8b = 0.02000000000000000042
C10 = 3.29999999999999982236
C11 = 0.40000000000000002220
C11b = 0.40000000000000002220
C11c = 0.50000000000000000000
C12 = 1.00000000000000000000
C13 = 0.10000000000000000555
C14 = 1.00000000000000000000
C_wp2_pr_dfsn = 0.00000000000000000000
C_wp3_pr_tp = 0.00000000000000000000
C_wp3_pr_turb = 1.00000000000000000000
C_wp3_pr_dfsn = 0.00000000000000000000
C_wp2_splat = 0.00000000000000000000
C6rt_Lscale0 = 14.00000000000000000000
C6thl_Lscale0 = 14.00000000000000000000
C7_Lscale0 = 0.84999999999999997780
wpxp_L_thresh = 60.00000000000000000000
c_K = 0.20000000000000001110
c_K1 = 0.20000000000000001110
nu1 = 20.00000000000000000000
c_K2 = 0.02500000000000000139
nu2 = 1.00000000000000000000
c_K6 = 0.37500000000000000000
nu6 = 5.00000000000000000000
c_K8 = 5.00000000000000000000
nu8 = 20.00000000000000000000
c_K9 = 0.10000000000000000555
nu9 = 10.00000000000000000000
nu10 = 0.00000000000000000000
c_K_hm = 0.75000000000000000000
c_K_hmb = 0.75000000000000000000
K_hm_min_coef = 0.10000000000000000555
nu_hm = 1.50000000000000000000
slope_coef_spread_DG_means_w = 21.00000000000000000000
pdf_component_stdev_factor_w = 1.00000000000000000000
coef_spread_DG_means_rt = 0.80000000000000004441
coef_spread_DG_means_thl = 0.80000000000000004441
gamma_coef = 0.25000000000000000000
gamma_coefb = 0.25000000000000000000
gamma_coefc = 5.00000000000000000000
mu = 0.00100000000000000002
beta = 1.00000000000000000000
lmin_coef = 0.50000000000000000000
omicron = 0.50000000000000000000
zeta_vrnce_rat = 0.00000000000000000000
upsilon_precip_frac_rat = 0.55000000000000004441
lambda0_stability_coef = 0.02999999999999999889
mult_coef = 0.50000000000000000000
taumin = 90.00000000000000000000
taumax = 3600.00000000000000000000
Lscale_mu_coef = 2.00000000000000000000
Lscale_pert_coef = 0.10000000000000000555
alpha_corr = 0.14999999999999999445
Skw_denom_coef = 4.00000000000000000000
c_K10 = 1.00000000000000000000
c_K10h = 1.00000000000000000000
thlp2_rad_coef = 1.00000000000000000000
thlp2_rad_cloud_frac_thresh = 0.10000000000000000555
up2_sfc_coef = 4.00000000000000000000
Skw_max_mag = 10.00000000000000000000
C_invrs_tau_bkgnd = 1.10000000000000008882
C_invrs_tau_sfc = 0.10000000000000000555
C_invrs_tau_shear = 0.14999999999999999445
C_invrs_tau_N2 = 0.40000000000000002220
C_invrs_tau_N2_wp2 = 0.20000000000000001110
C_invrs_tau_N2_xp2 = 0.05000000000000000278
C_invrs_tau_N2_wpxp = 0.00000000000000000000
C_invrs_tau_N2_clear_wp3 = 1.00000000000000000000
C_invrs_tau_wpxp_Ri = 0.34999999999999997780
C_invrs_tau_wpxp_N2_thresh = 0.00033000000000000000
xp3_coef_base = 0.25000000000000000000
xp3_coef_slope = 0.01000000000000000021
altitude_threshold = 100.00000000000000000000
rtp2_clip_coef = 0.50000000000000000000
Cx_min = 0.33000000000000001554
Cx_max = 0.94999999999999995559
Richardson_num_min = 0.25000000000000000000
Richardson_num_max = 400.00000000000000000000
a3_coef_min = 1.00000000000000000000
a_const = 1.80000000000000004441
bv_efold = 5.00000000000000000000
wpxp_Ri_exp = 0.50000000000000000000
z_displace = 25.00000000000000000000
--------------------------------------------------
µphysics_setting
--------------------------------------------------
microphys_scheme = morrison
l_cloud_sed = F
sigma_g = 1.50000000000000
l_graupel = F
l_hail = F
l_seifert_beheng = F
l_predict_Nc = F
l_const_Nc_in_cloud = F
specify_aerosol = morrison_lognormal
l_subgrid_w = T
l_arctic_nucl = F
l_cloud_edge_activation = F
l_fix_pgam = F
l_in_cloud_Nc_diff = T
l_var_covar_src = F
l_upwind_diff_sed = F
lh_microphys_type = disabled
lh_num_samples = 2
lh_sequence_length = 1
lh_seed = 5489
l_fix_w_chi_eta_correlations = T
l_silhs_KK_convergence_adj_mean = F
importance_prob_thresh = 1.000000000000000E-008
host_dx = 1000000.00000000
host_dy = 1000000.00000000
hmp2_ip_on_hmm2_ip_slope%rr = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%ri = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%rs = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%rg = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Nr = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Ni = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Ni = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Ng = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_intrcpt%rr = 1.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%ri = 1.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%rs = 1.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%rg = 1.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Nr = 1.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Ni = 1.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Ni = 1.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Ng = 1.00000000000000
Ncnp2_on_Ncnm2 = 1.00000000000000
C_evap = 0.860000000000000
r_0 = 2.500000000000000E-005
microphys_start_time = 64800.0000000000
Nc0_in_cloud = 100000000.000000
ccnconst = 120.000000000000
ccnexpnt = 0.400000005960464
aer_rm1 = 1.100000002196566E-008
aer_rm2 = 5.999999785899490E-008
aer_n1 = 125000000.000000
aer_n2 = 65000000.0000000
aer_sig1 = 1.20000004768372
aer_sig2 = 1.70000004768372
pgam_fixed = 5.00000000000000
precip_frac_calc_type = 2
--------------------------------------------------
&SILHS_setting
--------------------------------------------------
Warning: missing correlation input file(s): ../input/case_setups/nov11_altocu_c
orr_array_cloud.in and/or ../input/case_setups/nov11_altocu_corr_array_below.in
The default correlation arrays will be used.
Correlation array (approximate); in cloud:
1.000 -0.600 0.090 0.075 0.710 0.608 0.216 0.200 0.216 0.200
-0.600 1.000 0.027 0.022 0.103 0.104 -0.026 0.084 0.020 0.012
0.090 0.027 1.000 0.283 0.284 0.243 0.108 0.150 0.000 0.000
0.075 0.022 0.283 1.000 0.000 0.000 0.394 0.261 0.132 0.185
0.710 0.103 0.284 0.000 1.000 0.790 0.000 0.000 0.145 0.138
0.608 0.104 0.243 0.000 0.790 1.000 0.127 0.119 0.000 0.000
0.216 -0.026 0.108 0.394 0.000 0.127 1.000 0.720 0.535 0.521
0.200 0.084 0.150 0.261 0.000 0.119 0.720 1.000 0.521 0.500
0.216 0.020 0.000 0.132 0.145 0.000 0.535 0.521 1.000 0.720
0.200 0.012 0.000 0.185 0.138 0.000 0.521 0.500 0.720 1.000
Correlation array (approximate); below cloud:
1.000 0.300 0.090 0.075 0.710 0.608 0.216 0.200 0.216 0.200
0.300 1.000 0.027 0.022 0.103 0.104 -0.026 0.084 0.020 0.012
0.090 0.027 1.000 0.283 0.284 0.243 0.108 0.150 0.000 0.000
0.075 0.022 0.283 1.000 0.000 0.000 0.394 0.261 0.132 0.185
0.710 0.103 0.284 0.000 1.000 0.790 0.000 0.000 0.145 0.138
0.608 0.104 0.243 0.000 0.790 1.000 0.127 0.119 0.000 0.000
0.216 -0.026 0.108 0.394 0.000 0.127 1.000 0.720 0.535 0.521
0.200 0.084 0.150 0.261 0.000 0.119 0.720 1.000 0.521 0.500
0.216 0.020 0.000 0.132 0.145 0.000 0.535 0.521 1.000 0.720
0.200 0.012 0.000 0.185 0.138 0.000 0.521 0.500 0.720 1.000
--------------------------------------------------
&radiation_setting
--------------------------------------------------
rad_scheme = simplified
sol_const = 1367.00000000000
alvdr = 0.100000000000000
alvdf = 0.100000000000000
alndr = 0.100000000000000
alndf = 0.100000000000000
radiation_top = 50000.0000000000
F0 = 104.000000000000
F1 = 62.0000000000000
kappa = 94.2000000000000
gc = 0.860000000000000
omega = 0.996500000000000
slr = 1.00000000000000
l_rad_above_cloud = F
l_sw_radiation = T
l_fix_cos_solar_zen = T
l_use_default_std_atmosphere = T
Fs_values = 1212.75000000000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
cos_solar_zen_values = 0.432900000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
cos_solar_zen_times = -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
eff_drop_radius = 1.000000000000000E-005
--------------------------------------------------
&configurable_clubb_flags_nl
--------------------------------------------------
iiPDF_type = 1
ipdf_call_placement = 2
penta_solve_method = 1
tridiag_solve_method = 1
grid_remap_method = 1
grid_adapt_in_time_method = 0
l_use_precip_frac = T
l_predict_upwp_vpwp = T
l_ho_nontrad_coriolis = F
l_ho_trad_coriolis = F
l_min_wp2_from_corr_wx = F
l_min_xp2_from_corr_wx = T
l_C2_cloud_frac = F
l_diffuse_rtm_and_thlm = F
l_stability_correct_Kh_N2_zm = F
l_calc_thlp2_rad = T
l_upwind_xpyp_ta = T
l_upwind_xm_ma = T
l_uv_nudge = F
l_rtm_nudge = F
l_tke_aniso = T
l_vert_avg_closure = F
l_trapezoidal_rule_zt = F
l_trapezoidal_rule_zm = F
l_call_pdf_closure_twice = F
l_standard_term_ta = F
l_partial_upwind_wp3 = F
l_godunov_upwind_wpxp_ta = F
l_godunov_upwind_xpyp_ta = F
l_use_cloud_cover = F
l_diagnose_correlations = F
l_calc_w_corr = F
l_const_Nc_in_cloud = F
l_fix_w_chi_eta_correlations = T
l_stability_correct_tau_zm = F
l_damp_wp2_using_em = T
l_do_expldiff_rtm_thlm = F
l_Lscale_plume_centered = F
l_diag_Lscale_from_tau = T
l_use_C7_Richardson = T
l_use_C11_Richardson = F
l_use_shear_Richardson = F
l_brunt_vaisala_freq_moist = F
l_use_thvm_in_bv_freq = F
l_rcm_supersat_adj = T
l_damp_wp3_Skw_squared = T
l_prescribed_avg_deltaz = F
l_lmm_stepping = F
l_e3sm_config = F
l_vary_convect_depth = F
l_use_tke_in_wp3_pr_turb_term = T
l_use_tke_in_wp2_wp3_K_dfsn = F
l_use_wp3_lim_with_smth_Heaviside = F
l_smooth_Heaviside_tau_wpxp = T
l_modify_limiters_for_cnvg_test = F
l_enable_relaxed_clipping = F
l_linearize_pbl_winds = F
l_mono_flux_lim_thlm = T
l_mono_flux_lim_rtm = T
l_mono_flux_lim_um = T
l_mono_flux_lim_vm = T
l_mono_flux_lim_spikefix = T
l_host_applies_sfc_fluxes = F
l_wp2_fill_holes_tke = T
l_add_dycore_grid = F
--------------------------------------------------
git diff src/
--------------------------------------------------
See *setup.txt file in output folder
Path to sounding: nov11_altocu_sounding.in
File exists? T
Path to sclr_sounding: nov11_altocu_sclr_sounding.in
File exists? T
Path to edsclr_sounding: nov11_altocu_edsclr_sounding.in
File exists? T
Reading in sounding information
z = 3000.00000000000 4112.70000000000 4963.70000000000
5535.70000000000 5555.70000000000 7541.70000000000
u = 0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
v = 0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
ug = 0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
vg = 0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
theta = 303.830000000000 309.150000000000
311.500000000000 312.100000000000 314.000000000000
324.660000000000
rt = 4.250000000000000E-003 3.200000000000000E-003 2.700000000000000E-003
2.530000000000000E-003 2.250000000000000E-003 5.500000000000000E-004
p_in_Pa = -999.900000000000 -999.900000000000
-999.900000000000 -999.900000000000 -999.900000000000
-999.900000000000
subs = 0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
stats_nsamp = 1
stats_nout = 1
When the l_diag_Lscale_from_tau flag is enabled, C2rt must have a value of 1.
C2rt = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C2thl must have a value of 1.
C2thl = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C2rtthl must have a value of 1
.
C2rtthl = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6rt must have a value of 1.
C6rt = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6rtb must have a value of 1.
C6rtb = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.00000000000000
Warning in check_clubb_settings_api
Performing grid generalization test
iteration: 1 / 100 -- time = 61260.0 / 67200.0
iteration: 2 / 100 -- time = 61320.0 / 67200.0
iteration: 3 / 100 -- time = 61380.0 / 67200.0
iteration: 4 / 100 -- time = 61440.0 / 67200.0
**************************************************
Differences found in pdf_params%corr_rt_thl_1
- column 1 :
ascending @ k = 83 : -5.400679962918645E-002 descending @ k =
99 : -5.400677018732351E-002 difference = 2.944186294068230E-008
**************************************************
Differences found in pdf_params%corr_rt_thl_2
- column 1 :
ascending @ k = 83 : -5.400679962918645E-002 descending @ k =
99 : -5.400677018732351E-002 difference = 2.944186294068230E-008
##################################################
Discrepancy found in ascending vs. descending grid direction test. Please see m
essages listed above.
Mismatch in generalized grid test; Stopping run
CLUBB-TIMER time_loop_init = 0.0022
CLUBB-TIMER time_clubb_advance = 0.0972
CLUBB-TIMER time_clubb_pdf = 0.0980
CLUBB-TIMER time_SILHS = 0.0133
CLUBB-TIMER time_microphys_scheme = 0.0058
CLUBB-TIMER time_microphys_advance = 0.0012
CLUBB-TIMER time_loop_end = 0.0000
CLUBB-TIMER time_adapt_grid = 0.0000
CLUBB-TIMER time_total = 0.2430
Error in generalized grid test; check the error messages
COMPLETE -- mpace_b
COMPLETE -- gabls2
ERROR -- mc3e
- using executable: /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/run_scripts/../install/latest/clubb_standalone
=================== Running mc3e ===================
2026/03/16 11:49:16
--------------------------------------------------
Latest git log entry
--------------------------------------------------
A detailed git diff can be found at the end of this file
--------------------------------------------------
Tunable Parameters:
--------------------------------------------------
--------------------------------------------------
Preprocessing Directives:
--------------------------------------------------
-DNETCDF enabled
-DCOAMPS_MICRO enabled
-DTUNER disabled
-DSILHS enabled
-Dnooverlap enabled
-Draoffline enabled
-DUSE_BUGSrad_ocast_random disabled
-DBYTESWAP_IO disabled
--------------------------------------------------
&model_setting
--------------------------------------------------
runtype = mc3e
nzmax = 128
grid_type = 2
deltaz = 150.000000000000
zm_init = 0.000000000000000E+000
zm_top = 28625.0000000000
zt_grid_fname = ../input/grid/deep_convection_128lev_27km_zt_grid.grd
zm_grid_fname =
day = 22
month = 4
year = 2011
lat_vals = 36.5000000000000
lon_vals = -97.5000000000000
sfc_elevation = 0.000000000000000E+000
time_initial = 0.000000000000000E+000
time_final = 30000.0000000000
dt_main = 300.000000000000
dt_rad = 1800.00000000000
sfctype = 0
T_sfc = 288.000000000000
p_sfc = 96900.0000000000
sens_ht = 0.000000000000000E+000
latent_ht = 0.000000000000000E+000
fcor = 0.000000000000000E+000
fcor_y = 1.172344845451991E-004
T0 = 300.000000000000
ts_nudge = 7200.00000000000
forcings_file_path =
l_t_dependent = T
l_ignore_forcings = F
l_modify_ic_with_cubic_int = F
l_modify_bc_for_cnvg_test = F
l_input_xpwp_sfc = F
saturation_formula = 3
thlm_sponge_damp_settings%l_sponge_damping = F
rtm_sponge_damp_settings%l_sponge_damping = F
uv_sponge_damp_settings%l_sponge_damping = F
wp2_sponge_damp_settings%l_sponge_damping = F
wp3_sponge_damp_settings%l_sponge_damping = F
up2_vp2_sponge_damp_settings%l_sponge_damping = F
thlm_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
thlm_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
thlm_sponge_damp_settings%sponge_damp_depth = 0.200000000000000
rtm_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
rtm_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
rtm_sponge_damp_settings%sponge_damp_depth = 0.200000000000000
uv_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
uv_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
uv_sponge_damp_settings%sponge_damp_depth = 0.200000000000000
wp2_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
wp2_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
wp2_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
wp3_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
wp3_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
wp3_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
up2_vp2_sponge_damp_settings%tau_sponge_damp_min = 60.0000000000000
up2_vp2_sponge_damp_settings%tau_sponge_damp_max = 1800.00000000000
up2_vp2_sponge_damp_settings%sponge_damp_depth = 0.250000000000000
l_soil_veg = F
l_restart = F
l_input_fields = F
restart_path_case = restart/mc3e
time_restart = 0.000000000000000E+000
debug_level = 2
sclr_dim = 0
edsclr_dim = 0
iisclr_thl = -2
iisclr_rt = -1
iisclr_CO2 = -1
sclr_tol =
--------------------------------------------------
&stats_setting
--------------------------------------------------
l_stats = F
output_dir = /home/jenkins/workspace/clubb_rev_grid_matrix_solve_test/output/
fname_prefix = mc3e
stats_fmt = netcdf
stats_tsamp = 300.000000000000
stats_tout = 3600.00000000000
l_allow_small_stats_tout = F
Constant flags:
l_pos_def = F
l_gamma_Skw = T
l_byteswap_io = F
Constant tolerances [units]
rt_tol [kg/kg] = 1.000000000000000E-008
thl_tol [K] = 1.000000000000000E-002
w_tol [m/s] = 2.000000000000000E-002
Parameter Value
--------- -----
C1 = 1.00000000000000000000
C1b = 1.00000000000000000000
C1c = 1.00000000000000000000
C2rt = 2.00000000000000000000
C2thl = 2.00000000000000000000
C2rtthl = 2.00000000000000000000
C4 = 2.00000000000000000000
C_uu_shr = 0.40000000000000002220
C_uu_buoy = 0.29999999999999998890
C6rt = 2.00000000000000000000
C6rtb = 2.00000000000000000000
C6rtc = 1.00000000000000000000
C6thl = 2.00000000000000000000
C6thlb = 2.00000000000000000000
C6thlc = 1.00000000000000000000
C7 = 0.50000000000000000000
C7b = 0.50000000000000000000
C7c = 0.50000000000000000000
C8 = 0.50000000000000000000
C8b = 0.02000000000000000042
C10 = 3.29999999999999982236
C11 = 0.40000000000000002220
C11b = 0.40000000000000002220
C11c = 0.50000000000000000000
C12 = 1.00000000000000000000
C13 = 0.10000000000000000555
C14 = 1.00000000000000000000
C_wp2_pr_dfsn = 0.00000000000000000000
C_wp3_pr_tp = 0.00000000000000000000
C_wp3_pr_turb = 1.00000000000000000000
C_wp3_pr_dfsn = 0.00000000000000000000
C_wp2_splat = 0.00000000000000000000
C6rt_Lscale0 = 14.00000000000000000000
C6thl_Lscale0 = 14.00000000000000000000
C7_Lscale0 = 0.84999999999999997780
wpxp_L_thresh = 60.00000000000000000000
c_K = 0.20000000000000001110
c_K1 = 0.20000000000000001110
nu1 = 20.00000000000000000000
c_K2 = 0.02500000000000000139
nu2 = 1.00000000000000000000
c_K6 = 0.37500000000000000000
nu6 = 5.00000000000000000000
c_K8 = 5.00000000000000000000
nu8 = 20.00000000000000000000
c_K9 = 0.10000000000000000555
nu9 = 10.00000000000000000000
nu10 = 0.00000000000000000000
c_K_hm = 0.75000000000000000000
c_K_hmb = 0.75000000000000000000
K_hm_min_coef = 0.10000000000000000555
nu_hm = 1.50000000000000000000
slope_coef_spread_DG_means_w = 21.00000000000000000000
pdf_component_stdev_factor_w = 1.00000000000000000000
coef_spread_DG_means_rt = 0.80000000000000004441
coef_spread_DG_means_thl = 0.80000000000000004441
gamma_coef = 0.25000000000000000000
gamma_coefb = 0.25000000000000000000
gamma_coefc = 5.00000000000000000000
mu = 0.00100000000000000002
beta = 1.00000000000000000000
lmin_coef = 0.50000000000000000000
omicron = 0.50000000000000000000
zeta_vrnce_rat = 0.00000000000000000000
upsilon_precip_frac_rat = 0.55000000000000004441
lambda0_stability_coef = 0.02999999999999999889
mult_coef = 0.50000000000000000000
taumin = 90.00000000000000000000
taumax = 3600.00000000000000000000
Lscale_mu_coef = 2.00000000000000000000
Lscale_pert_coef = 0.10000000000000000555
alpha_corr = 0.14999999999999999445
Skw_denom_coef = 4.00000000000000000000
c_K10 = 1.00000000000000000000
c_K10h = 1.00000000000000000000
thlp2_rad_coef = 1.00000000000000000000
thlp2_rad_cloud_frac_thresh = 0.10000000000000000555
up2_sfc_coef = 4.00000000000000000000
Skw_max_mag = 10.00000000000000000000
C_invrs_tau_bkgnd = 1.10000000000000008882
C_invrs_tau_sfc = 0.10000000000000000555
C_invrs_tau_shear = 0.14999999999999999445
C_invrs_tau_N2 = 0.40000000000000002220
C_invrs_tau_N2_wp2 = 0.20000000000000001110
C_invrs_tau_N2_xp2 = 0.05000000000000000278
C_invrs_tau_N2_wpxp = 0.00000000000000000000
C_invrs_tau_N2_clear_wp3 = 1.00000000000000000000
C_invrs_tau_wpxp_Ri = 0.34999999999999997780
C_invrs_tau_wpxp_N2_thresh = 0.00033000000000000000
xp3_coef_base = 0.25000000000000000000
xp3_coef_slope = 0.01000000000000000021
altitude_threshold = 100.00000000000000000000
rtp2_clip_coef = 0.50000000000000000000
Cx_min = 0.33000000000000001554
Cx_max = 0.94999999999999995559
Richardson_num_min = 0.25000000000000000000
Richardson_num_max = 400.00000000000000000000
a3_coef_min = 1.00000000000000000000
a_const = 1.80000000000000004441
bv_efold = 5.00000000000000000000
wpxp_Ri_exp = 0.50000000000000000000
z_displace = 25.00000000000000000000
--------------------------------------------------
µphysics_setting
--------------------------------------------------
microphys_scheme = morrison
l_cloud_sed = F
sigma_g = 1.50000000000000
l_graupel = T
l_hail = F
l_seifert_beheng = F
l_predict_Nc = F
l_const_Nc_in_cloud = T
specify_aerosol = morrison_lognormal
l_subgrid_w = T
l_arctic_nucl = F
l_cloud_edge_activation = F
l_fix_pgam = F
l_in_cloud_Nc_diff = T
l_var_covar_src = T
l_upwind_diff_sed = F
lh_microphys_type = interactive
lh_num_samples = 8
lh_sequence_length = 1
lh_seed = 5489
l_fix_w_chi_eta_correlations = T
l_silhs_KK_convergence_adj_mean = F
importance_prob_thresh = 1.000000000000000E-008
host_dx = 1000000.00000000
host_dy = 1000000.00000000
hmp2_ip_on_hmm2_ip_slope%rr = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%ri = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%rs = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%rg = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Nr = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Ni = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Ni = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_slope%Ng = 0.000000000000000E+000
hmp2_ip_on_hmm2_ip_intrcpt%rr = 5.00000000000000
hmp2_ip_on_hmm2_ip_intrcpt%ri = 1.25000000000000
hmp2_ip_on_hmm2_ip_intrcpt%rs = 1.25000000000000
hmp2_ip_on_hmm2_ip_intrcpt%rg = 1.25000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Nr = 2.50000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Ni = 0.625000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Ni = 0.625000000000000
hmp2_ip_on_hmm2_ip_intrcpt%Ng = 0.625000000000000
Ncnp2_on_Ncnm2 = 3.000000000000000E-003
C_evap = 0.860000000000000
r_0 = 2.500000000000000E-005
microphys_start_time = 0.000000000000000E+000
Nc0_in_cloud = 100000000.000000
ccnconst = 120.000000000000
ccnexpnt = 0.400000005960464
aer_rm1 = 1.100000002196566E-008
aer_rm2 = 5.999999785899490E-008
aer_n1 = 125000000.000000
aer_n2 = 65000000.0000000
aer_sig1 = 1.20000004768372
aer_sig2 = 1.70000004768372
pgam_fixed = 5.00000000000000
precip_frac_calc_type = 2
--------------------------------------------------
&SILHS_setting
--------------------------------------------------
Correlation array (approximate); in cloud:
1.000 0.300 0.090 0.090 0.270 0.310 -0.085 0.290 0.063 0.041 0.000 0.000
0.300 1.000 0.027 0.027 0.081 0.093 -0.026 0.087 0.019 0.012 0.000 0.000
0.090 0.027 1.000 0.340 0.000 0.000 0.465 0.570 0.688 0.757 0.000 0.000
0.090 0.027 0.340 1.000 0.000 0.000 0.464 0.320 0.168 0.232 0.000 0.000
0.270 0.081 0.000 0.000 1.000 0.808 0.000 0.000 0.000 0.000 0.000 0.000
0.310 0.093 0.000 0.000 0.808 1.000 0.000 0.000 0.000 0.000 0.000 0.000
-0.085 -0.026 0.465 0.464 0.000 0.000 1.000 0.785 0.312 0.512 0.000 0.000
0.290 0.087 0.570 0.320 0.000 0.000 0.785 1.000 0.452 0.616 0.000 0.000
0.063 0.019 0.688 0.168 0.000 0.000 0.312 0.452 1.000 0.955 0.000 0.000
0.041 0.012 0.757 0.232 0.000 0.000 0.512 0.616 0.955 1.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.000
Correlation array (approximate); below cloud:
1.000 0.300 0.090 0.090 0.062 0.016 -0.085 0.290 0.063 0.041 0.000 0.000
0.300 1.000 0.027 0.027 0.188 0.005 -0.026 0.087 0.019 0.012 0.000 0.000
0.090 0.027 1.000 0.340 0.000 0.000 0.465 0.570 0.688 0.757 0.000 0.000
0.090 0.027 0.340 1.000 0.000 0.000 0.464 0.320 0.168 0.232 0.000 0.000
0.062 0.188 0.000 0.000 1.000 0.898 0.000 0.000 0.000 0.000 0.000 0.000
0.016 0.005 0.000 0.000 0.898 1.000 0.000 0.000 0.000 0.000 0.000 0.000
-0.085 -0.026 0.465 0.464 0.000 0.000 1.000 0.785 0.312 0.512 0.000 0.000
0.290 0.087 0.570 0.320 0.000 0.000 0.785 1.000 0.452 0.616 0.000 0.000
0.063 0.019 0.688 0.168 0.000 0.000 0.312 0.452 1.000 0.955 0.000 0.000
0.041 0.012 0.757 0.232 0.000 0.000 0.512 0.616 0.955 1.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.000
--------------------------------------------------
&radiation_setting
--------------------------------------------------
rad_scheme = bugsrad
sol_const = 1367.00000000000
alvdr = 0.100000000000000
alvdf = 0.100000000000000
alndr = 0.100000000000000
alndf = 0.100000000000000
radiation_top = 50000.0000000000
F0 = 100.000000000000
F1 = 20.0000000000000
kappa = 119.000000000000
gc = 0.860000000000000
omega = 0.996500000000000
slr = 1.00000000000000
l_rad_above_cloud = F
l_sw_radiation = T
l_fix_cos_solar_zen = F
l_use_default_std_atmosphere = T
Fs_values = 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
cos_solar_zen_values = -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
cos_solar_zen_times = -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
-999.000000000000 -999.000000000000 -999.000000000000
eff_drop_radius = 1.000000000000000E-005
--------------------------------------------------
&configurable_clubb_flags_nl
--------------------------------------------------
iiPDF_type = 1
ipdf_call_placement = 2
penta_solve_method = 1
tridiag_solve_method = 1
grid_remap_method = 1
grid_adapt_in_time_method = 0
l_use_precip_frac = T
l_predict_upwp_vpwp = T
l_ho_nontrad_coriolis = F
l_ho_trad_coriolis = F
l_min_wp2_from_corr_wx = F
l_min_xp2_from_corr_wx = T
l_C2_cloud_frac = F
l_diffuse_rtm_and_thlm = F
l_stability_correct_Kh_N2_zm = F
l_calc_thlp2_rad = T
l_upwind_xpyp_ta = T
l_upwind_xm_ma = T
l_uv_nudge = T
l_rtm_nudge = F
l_tke_aniso = T
l_vert_avg_closure = F
l_trapezoidal_rule_zt = F
l_trapezoidal_rule_zm = F
l_call_pdf_closure_twice = F
l_standard_term_ta = F
l_partial_upwind_wp3 = F
l_godunov_upwind_wpxp_ta = F
l_godunov_upwind_xpyp_ta = F
l_use_cloud_cover = F
l_diagnose_correlations = F
l_calc_w_corr = F
l_const_Nc_in_cloud = T
l_fix_w_chi_eta_correlations = T
l_stability_correct_tau_zm = F
l_damp_wp2_using_em = T
l_do_expldiff_rtm_thlm = F
l_Lscale_plume_centered = F
l_diag_Lscale_from_tau = T
l_use_C7_Richardson = T
l_use_C11_Richardson = F
l_use_shear_Richardson = F
l_brunt_vaisala_freq_moist = F
l_use_thvm_in_bv_freq = F
l_rcm_supersat_adj = T
l_damp_wp3_Skw_squared = T
l_prescribed_avg_deltaz = F
l_lmm_stepping = F
l_e3sm_config = F
l_vary_convect_depth = F
l_use_tke_in_wp3_pr_turb_term = T
l_use_tke_in_wp2_wp3_K_dfsn = F
l_use_wp3_lim_with_smth_Heaviside = F
l_smooth_Heaviside_tau_wpxp = T
l_modify_limiters_for_cnvg_test = F
l_enable_relaxed_clipping = F
l_linearize_pbl_winds = F
l_mono_flux_lim_thlm = T
l_mono_flux_lim_rtm = T
l_mono_flux_lim_um = T
l_mono_flux_lim_vm = T
l_mono_flux_lim_spikefix = T
l_host_applies_sfc_fluxes = F
l_wp2_fill_holes_tke = T
l_add_dycore_grid = F
--------------------------------------------------
git diff src/
--------------------------------------------------
See *setup.txt file in output folder
Path to sounding: mc3e_sounding.in
File exists? T
Path to sclr_sounding: mc3e_sclr_sounding.in
File exists? F
Path to edsclr_sounding: mc3e_edsclr_sounding.in
File exists? F
Reading in sounding information
z = -802.836482401135 -600.963362672882 -394.169982913634
-182.218307842999 35.1555721497566 258.236373376274
487.325776631899 722.553704262400 964.620215301004
1214.34851185493 1471.89720272096 1737.18679737478
2010.17545465510 2290.71043337257 2578.35160179393
2873.26619216702 3176.11433744878 3487.45079784883
3807.70646554070 4137.40378413802 4477.38324253424
4828.85526567531 5193.08251405177 5571.24467394144
5964.70776469850 6375.07625698207 6803.87571317806
7252.75557008858 7724.04131699915 8220.73082212425
8746.36055843156 9305.16984279762 9902.64123885976
10546.4815634562 11248.4238687632 12026.8463030319
12908.8382575115 13930.9752610604 15143.2477389862
16639.0509807531 18629.2120077880 21655.6813602960
27965.2134517819
u = -4.59024000000000 -4.59024000000000 -4.59024000000000
-4.59024000000000 -4.59024000000000 -4.59024000000000
-2.23596000000000 2.26570000000000 7.79240000000000
11.5154000000000 13.2498000000000 13.0405000000000
13.8200000000000 15.3551000000000 16.1690010000000
17.0772000000000 18.5592000000000 20.1880000000000
21.3136010000000 22.3169990000000 23.5462000000000
24.5202010000000 22.9747010000000 22.1005990000000
23.2603000000000 23.8850990000000 23.5089000000000
23.2626000000000 23.3894000000000 24.4768010000000
26.2097000000000 27.8340000000000 29.4988000000000
30.4185010000000 31.5763000000000 34.0747990000000
35.5219990000000 33.0521010000000 28.4627000000000
19.5872000000000 8.83378000000000 -0.435852000000000
-0.436000000000000
v = 10.8882000000000 10.8882000000000 10.8882000000000
10.8882000000000 10.8882000000000 10.8882000000000
16.0147990000000 19.1067010000000 21.0722010000000
16.9270000000000 12.4254000000000 10.2970000000000
9.88391000000000 10.4273000000000 10.4582000000000
9.53087000000000 7.91296000000000 6.92792000000000
6.86569000000000 6.99273000000000 7.12036000000000
6.66633000000000 5.36533000000000 4.72899000000000
4.53079000000000 5.42810000000000 6.71954000000000
6.12811000000000 4.92457000000000 5.53097000000000
7.37149000000000 8.51451000000000 8.40838000000000
9.49674000000000 14.4384000000000 17.3664000000000
15.1029000000000 10.9160000000000 8.99786000000000
7.71852000000000 6.10087000000000 3.81888000000000
3.82000000000000
ug = -4.59024000000000 -4.59024000000000 -4.59024000000000
-4.59024000000000 -4.59024000000000 -4.59024000000000
-2.23596000000000 2.26570000000000 7.79240000000000
11.5154000000000 13.2498000000000 13.0405000000000
13.8200000000000 15.3551000000000 16.1690010000000
17.0772000000000 18.5592000000000 20.1880000000000
21.3136010000000 22.3169990000000 23.5462000000000
24.5202010000000 22.9747010000000 22.1005990000000
23.2603000000000 23.8850990000000 23.5089000000000
23.2626000000000 23.3894000000000 24.4768010000000
26.2097000000000 27.8340000000000 29.4988000000000
30.4185010000000 31.5763000000000 34.0747990000000
35.5219990000000 33.0521010000000 28.4627000000000
19.5872000000000 8.83378000000000 -0.435852000000000
-0.436000000000000
vg = 10.8882000000000 10.8882000000000 10.8882000000000
10.8882000000000 10.8882000000000 10.8882000000000
16.0147990000000 19.1067010000000 21.0722010000000
16.9270000000000 12.4254000000000 10.2970000000000
9.88391000000000 10.4273000000000 10.4582000000000
9.53087000000000 7.91296000000000 6.92792000000000
6.86569000000000 6.99273000000000 7.12036000000000
6.66633000000000 5.36533000000000 4.72899000000000
4.53079000000000 5.42810000000000 6.71954000000000
6.12811000000000 4.92457000000000 5.53097000000000
7.37149000000000 8.51451000000000 8.40838000000000
9.49674000000000 14.4384000000000 17.3664000000000
15.1029000000000 10.9160000000000 8.99786000000000
7.71852000000000 6.10087000000000 3.81888000000000
3.82000000000000
theta = 283.461975000000 285.393311000000
287.385284000000 289.441345000000 291.565277000000
293.761200000000 296.020172000000 297.924957000000
301.296356000000 304.312195000000 307.312317000000
310.010101000000 311.526733000000 312.165070000000
312.128845000000 312.384094000000 312.961914000000
313.274445000000 313.321625000000 313.368805000000
313.718384000000 314.567719000000 315.581940000000
316.550812000000 317.675690000000 318.898651000000
319.796143000000 320.636749000000 321.661987000000
322.919281000000 324.300720000000 325.812622000000
327.706604000000 330.562592000000 335.545044000000
344.120544000000 356.675140000000 371.781342000000
388.015747000000 413.432404000000 458.317902000000
540.306580000000 620.000000000000
rt = 1.048027000000000E-002 1.048027000000000E-002 1.048027000000000E-002
1.048027000000000E-002 1.048027000000000E-002 1.048027000000000E-002
1.046756400000000E-002 1.010859200000000E-002 9.656408999999999E-003
9.804469000000000E-003 8.632292000000000E-003 4.630161000000000E-003
5.968936000000000E-003 6.131915000000000E-003 5.680778000000000E-003
4.946347000000000E-003 3.462886000000000E-003 2.835909000000000E-003
2.671732000000000E-003 2.367653000000000E-003 2.008794000000000E-003
1.431938000000000E-003 6.971340000000000E-004 4.776090000000000E-004
3.438710000000000E-004 2.976320000000000E-004 3.213450000000000E-004
2.419290000000000E-004 2.215620000000000E-004 1.670220000000000E-004
9.259400000000000E-005 1.011260000000000E-004 6.942600000000000E-005
4.617900000000000E-005 2.425000000000000E-005 1.236000000000000E-005
6.710000000000000E-006 5.267000000000000E-006 3.425000000000000E-006
3.476000000000000E-006 6.104000000000000E-006 1.983300000000000E-005
1.980000000000000E-005
p_in_Pa = 106500.000000000 104000.000000000
101500.000000000 99000.0000000000 96500.0000000000
94000.0000000000 91500.0000000000 89000.0000000000
86500.0000000000 84000.0000000000 81500.0000000000
79000.0000000000 76500.0000000000 74000.0000000000
71500.0000000000 69000.0000000000 66500.0000000000
64000.0000000000 61500.0000000000 59000.0000000000
56500.0000000000 54000.0000000000 51500.0000000000
49000.0000000000 46500.0000000000 44000.0000000000
41500.0000000000 39000.0000000000 36500.0000000000
34000.0000000000 31500.0000000000 29000.0000000000
26500.0000000000 24000.0000000000 21500.0000000000
19000.0000000000 16500.0000000000 14000.0000000000
11500.0000000000 9000.00000000000 6500.00000000000
4000.00000000000 1350.00000000000
subs = 0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000 0.000000000000000E+000 0.000000000000000E+000
0.000000000000000E+000
stats_nsamp = 1
stats_nout = 12
When the l_diag_Lscale_from_tau flag is enabled, C2rt must have a value of 1.
C2rt = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C2thl must have a value of 1.
C2thl = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C2rtthl must have a value of 1
.
C2rtthl = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6rt must have a value of 1.
C6rt = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6rtb must have a value of 1.
C6rtb = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.00000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.00000000000000
Warning in check_clubb_settings_api
Performing grid generalization test
iteration: 1 / 100 -- time = 300.0 / 30000.0
iteration: 2 / 100 -- time = 600.0 / 30000.0
iteration: 3 / 100 -- time = 900.0 / 30000.0
iteration: 4 / 100 -- time = 1200.0 / 30000.0
iteration: 5 / 100 -- time = 1500.0 / 30000.0
iteration: 6 / 100 -- time = 1800.0 / 30000.0
iteration: 7 / 100 -- time = 2100.0 / 30000.0
iteration: 8 / 100 -- time = 2400.0 / 30000.0
iteration: 9 / 100 -- time = 2700.0 / 30000.0
iteration: 10 / 100 -- time = 3000.0 / 30000.0
iteration: 11 / 100 -- time = 3300.0 / 30000.0
iteration: 12 / 100 -- time = 3600.0 / 30000.0
iteration: 13 / 100 -- time = 3900.0 / 30000.0
iteration: 14 / 100 -- time = 4200.0 / 30000.0
iteration: 15 / 100 -- time = 4500.0 / 30000.0
iteration: 16 / 100 -- time = 4800.0 / 30000.0
iteration: 17 / 100 -- time = 5100.0 / 30000.0
iteration: 18 / 100 -- time = 5400.0 / 30000.0
iteration: 19 / 100 -- time = 5700.0 / 30000.0
iteration: 20 / 100 -- time = 6000.0 / 30000.0
iteration: 21 / 100 -- time = 6300.0 / 30000.0
iteration: 22 / 100 -- time = 6600.0 / 30000.0
iteration: 23 / 100 -- time = 6900.0 / 30000.0
iteration: 24 / 100 -- time = 7200.0 / 30000.0
iteration: 25 / 100 -- time = 7500.0 / 30000.0
iteration: 26 / 100 -- time = 7800.0 / 30000.0
iteration: 27 / 100 -- time = 8100.0 / 30000.0
iteration: 28 / 100 -- time = 8400.0 / 30000.0
iteration: 29 / 100 -- time = 8700.0 / 30000.0
iteration: 30 / 100 -- time = 9000.0 / 30000.0
Warning: One-level hole filling was not successful! total_mass ~= 0
rim < 0.000000000000000E+000 in fill_holes_driver_api at k= 118
Nim < 0.000000000000000E+000 in fill_holes_driver_api at k= 118
iteration: 31 / 100 -- time = 9300.0 / 30000.0
iteration: 32 / 100 -- time = 9600.0 / 30000.0
iteration: 33 / 100 -- time = 9900.0 / 30000.0
iteration: 34 / 100 -- time = 10200.0 / 30000.0
iteration: 35 / 100 -- time = 10500.0 / 30000.0
iteration: 36 / 100 -- time = 10800.0 / 30000.0
**************************************************
Differences found in pdf_params%ice_supersat_frac_2
- column 1 :
ascending @ k = 120 : 0.564377921956024 descending @ k =
8 : 0.564377933583577 difference = 1.162755314254582E-008
##################################################
Discrepancy found in ascending vs. descending grid direction test. Please see m
essages listed above.
Mismatch in generalized grid test; Stopping run
CLUBB-TIMER time_loop_init = 0.0127
CLUBB-TIMER time_clubb_advance = 0.6294
CLUBB-TIMER time_clubb_pdf = 1.3072
CLUBB-TIMER time_SILHS = 0.6353
CLUBB-TIMER time_microphys_scheme = 1.3915
CLUBB-TIMER time_microphys_advance = 0.5019
CLUBB-TIMER time_loop_end = 0.0000
CLUBB-TIMER time_adapt_grid = 0.0000
CLUBB-TIMER time_total = 4.6630
Error in generalized grid test; check the error messages
COMPLETE -- rico
COMPLETE -- gabls3
COMPLETE -- mpace_b_silhs
COMPLETE -- wangara
COMPLETE -- rico_silhs
COMPLETE -- mpace_a
COMPLETE -- twp_ice
COMPLETE -- lba
=================== Runs Complete ===================
mc3e failure
nov11_altocu failure
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Custom LU)
Stage "Custom LU" skipped due to earlier failure(s)
[Pipeline] getContext
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Declarative: Post Actions)
[Pipeline] script
[Pipeline] {
[Pipeline] cleanWs
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Deferred wipeout is used...
[WS-CLEANUP] done
[Pipeline] }
[Pipeline] // script
[Pipeline] script
[Pipeline] {
[Pipeline] emailext
Sending email to: messnermet@uwm.edu
[Pipeline] }
[Pipeline] // script
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
[Pipeline] // node
[Pipeline] End of Pipeline
ERROR: script returned exit code 1
Finished: FAILURE
