Console Output
+ source /etc/profile.d/larson-group.sh
++ export GIT_EDITOR=vi
++ GIT_EDITOR=vi
++ export SVN_EDITOR=vi
++ SVN_EDITOR=vi
++ export OMP_STACKSIZE=1048579
++ OMP_STACKSIZE=1048579
++ export LMOD_ROOT=/opt/lmod/
++ LMOD_ROOT=/opt/lmod/
++ source /opt/lmod//lmod/lmod/init/bash
+++ '[' -z '' ']'
+++ case "$-" in
+++ __lmod_vx=x
+++ '[' -n x ']'
+++ set +x
Shell debugging temporarily silenced: export LMOD_SH_DBG_ON=1 for this output (/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-12.2.0/lmod-8.7.37-bi3kyxcdrfgw3y7vv2k7c5rjxg75qzju/lmod/lmod/init/bash)
Shell debugging restarted
+++ unset __lmod_vx
+++ find /usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core -print -quit
++ export MODULEPATH=/usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core
++ MODULEPATH=/usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core
+ module load gcc netcdf-fortran
+ '[' -z '' ']'
+ case "$-" in
+ __lmod_sh_dbg=x
+ '[' -n x ']'
+ set +x
Shell debugging temporarily silenced: export LMOD_SH_DBG_ON=1 for Lmod's output
Lmod Warning:
-------------------------------------------------------------------------------
The following dependent module(s) are not currently loaded:
gcc-runtime/13.1.0-gzedt3f (required by: mpich/4.2.1, hdf5/1.14.3-42x3zrv,
netcdf-c/4.9.2, netcdf-fortran/4.5.3)
-------------------------------------------------------------------------------
Shell debugging restarted
+ unset __lmod_sh_dbg
+ return 0
+ ./compile.py -debug -openmp -run_tests
-- Compiling with double precision
-- netcdf-fortran found via pkg-config
-- Include dirs: /usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/include;/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-c-4.9.2-vfbwjy5rcwhozcnzui7joyfxgxpytu5a/include
-- Libraries: netcdff
-- Derived NetCDFFortran_ROOT = /usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir
-- OpenMP Fortran support found
-- Flags: -fopenmp
-- Includes:
-- Libraries:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-12.2.0/gcc-13.1.0-uswx4gd4eee2bf3orriqppfr4j25x4li/lib64/libgomp.so;/lib/x86_64-linux-gnu/libpthread.a
-- Configuring done
-- Generating done
-- Build files have been written to: /home/jenkins/workspace/clubb_cmake_test/build/gcc_DEBUG_PRECdouble
Using inferred toolchain file: /home/jenkins/workspace/clubb_cmake_test/cmake/toolchains/linux_x86_64_gcc.cmake
Setting CLUBB installation dir: /home/jenkins/workspace/clubb_cmake_test/build/gcc_DEBUG_PRECdouble
Setting CLUBB installation dir: /home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble
about to cmnake /home/jenkins/workspace/clubb_cmake_test/build/gcc_DEBUG_PRECdouble
Running CMake configure...
[1/6] Building Fortran preprocessed src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90-pp.f90
[2/6] Generating Fortran dyndep file src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Fortran.dd
[3/6] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90.o
[4/6] Linking Fortran static library src/G_unit_test_types/libG_unit_test_lib.a
[5/6] Linking Fortran executable src/G_unit_tests
[5/6] Install the project...
-- Install configuration: "Debug"
-- Up-to-date: /home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble/libclubb_driver_lib.a
-- Up-to-date: /home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble/clubb_tuner
-- Installing: /home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble/G_unit_tests
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble/G_unit_tests" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir:/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-13.1.0/netcdf-fortran-4.5.3-ivafocv4fav4rj3ckswo6vj33utvtdir/lib"
-- Up-to-date: /home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble/clubb_thread_test
-- Up-to-date: /home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble/clubb_standalone
-- Up-to-date: /home/jenkins/workspace/clubb_cmake_test/install/gcc_DEBUG_PRECdouble/clubb_driver_test
check_for_missing_threadprivate.py has begun.
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/corr_varnce_module.F90 failed:
Missing threadprivate for:
corr_array_n_below_def
corr_array_n_cloud_def
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/error_code.F90 failed:
Missing threadprivate for:
clubb_debug_level
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/sponge_layer_damping.F90 failed:
Missing threadprivate for:
uv_sponge_damp_profile
thlm_sponge_damp_profile
rtm_sponge_damp_profile
up2_vp2_sponge_damp_profile
thlm_sponge_damp_settings
wp2_sponge_damp_profile
wp3_sponge_damp_profile
uv_sponge_damp_settings
rtm_sponge_damp_settings
wp2_sponge_damp_settings
wp3_sponge_damp_settings
up2_vp2_sponge_damp_settings
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/fill_holes.F90 failed:
Missing threadprivate for:
ret_code
[91mcheck_for_missing_threadprivate.py did not pass.[0m
[91mfailedFiles = ['/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/corr_varnce_module.F90', '/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/error_code.F90', '/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/sponge_layer_damping.F90', '/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/fill_holes.F90'][0m
[91m===============================================================
[91mTHREADPRIVATE CHECK FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_cmake_test/build/gcc_DEBUG_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
CLUBBStandardsCheck.py has begun.
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/generalized_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 3: module generalized_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/generalized_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 903 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1071 : 101 chars : rtm_ref_flip, thlm_ref_flip, um_ref_flip, vm_ref_flip, ug_flip, vg_flip, & ! Intent(in)
line 1084 : 111 chars : um_flip, vm_flip, upwp_flip, vpwp_flip, up2_flip, vp2_flip, up3_flip, vp3_flip, & ! Intent(inout)
line 1086 : 111 chars : wp2_flip, wp3_flip, rtp2_flip, rtp3_flip, thlp2_flip, thlp3_flip, rtpthlp_flip, & ! Intent(inout)
line 1092 : 109 chars : wp2rtp_flip, wp2thlp_flip, uprcp_flip, vprcp_flip, rc_coef_zm_flip, wp4_flip, & ! intent(inout)
line 1093 : 105 chars : wpup2_flip, wpvp2_flip, wp2up2_flip, wp2vp2_flip, ice_supersat_frac_flip, & ! intent(inout)
line 1582 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1609 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2up_implicit, nzt, ngrdcol, &
line 1613 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2up_explicit, nzt, ngrdcol, &
line 1617 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2vp_implicit, nzt, ngrdcol, &
line 1621 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2vp_explicit, nzt, ngrdcol, &
line 1655 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpup2_implicit, nzt, ngrdcol, &
line 1659 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpup2_explicit, nzt, ngrdcol, &
line 1663 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpvp2_implicit, nzt, ngrdcol, &
line 1667 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpvp2_explicit, nzt, ngrdcol, &
line 2471 : 105 chars : tolerance = max( 1.e-8_core_rknd, epsilon(tolerance) ) ! max statement for single precision runs
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90 ---------------------
WARNING: 'use' statements without 'only' found in the following lines:
WARNING: Check that comma is on same line as 'use', as CLUBB requires.
3107 : use gptl
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 197 : 110 chars : l_modify_ic_with_cubic_int, & ! Flag for interpolating the sounding profile with Steffen's monotone cubic
line 198 : 110 chars : ! method to obtain smoother initial condition profile, which is found to be
line 199 : 111 chars : ! beneficial to achive a better numerical solution convergence. If this flag
line 200 : 118 chars : ! is turned off, the initial conditions will be generated with linear interpolation.
line 201 : 111 chars : ! This is done on a case-by-case basis, since using the monotone cubic method
line 202 : 109 chars : ! requires a special sounding.in file with many additional sounding levels.
line 203 : 109 chars : l_modify_bc_for_cnvg_test, & ! Flag to activate modifications on boundary condition for convergence test
line 714 : 108 chars : !$omp wm_zm_init, em_init, exner_init, thvm_init, p_in_Pa_init, p_in_Pa_zm_init, rho_init, rho_zm_init, &
line 722 : 101 chars : !$omp sens_ht, latent_ht, lmin, vert_decorr_coef, deep_soil_T_in_K, sfc_soil_T_in_K, veg_T_in_K, &
line 729 : 101 chars : !$omp exner, rtm, thlm, rcm, wp3, wp3_zm, delta_zm, p_in_Pa, cloud_frac, wpthvp, wp2thvp, wp2up, &
line 738 : 102 chars : !$omp rtp2_mc, thlp2_mc, rtpthlp_mc, Ncm_mc, Ncm, Nccnm, em, tau_zm, tau_zt, Kh_zt, Kh_zm, rfrzm, &
line 740 : 102 chars : !$omp wpsclrp_sfc, wpedsclrp_sfc, sclrm, wpsclrp, sclrp2, sclrp3, sclrprtp, sclrpthlp, sclrpthvp, &
line 1002 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 1733 : 102 chars : open(unit=iunit_grid_adaptation, file=fname_grid_adaptation, status='replace', action='write')
line 2049 : 105 chars : allocate( um_ref(ngrdcol, gr%nzt) ) ! Reference u wind for nudging; Michael Falk, 17 Oct 2007
line 2050 : 105 chars : allocate( vm_ref(ngrdcol, gr%nzt) ) ! Reference v wind for nudging; Michael Falk, 17 Oct 2007
line 2500 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 2531 : 106 chars : ! Similar call to above, checking parameter values, but because we've placed this in "init_clubb_case"
line 2539 : 116 chars : write(fstderr, *) "Fatal error calling check_clubb_settings_api and/or check_parameters_api in clubb_driver"
line 2582 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 2594 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 2595 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 2598 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 2600 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 2606 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 2607 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 2608 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 2609 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 2610 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 2611 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 2612 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 2613 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 2614 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 2615 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 2731 : 103 chars : invrs_rho_ds_zt(i,k) = invrs_rho_ds_zt_init(k) ! inv. dry, static density: t-levs
line 2737 : 103 chars : um_pert(i,k) = zero ! Variables used to track perturbed version of winds.
line 2739 : 105 chars : wm_zt(i,k) = wm_zt_init(k) ! Imposed large scale w - Thermodynamic levels
line 2921 : 103 chars : open( unit=iunit_grid_adaptation+10, file=trim( output_dir ) // trim( runtype ) // '_grid.txt', &
line 2933 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 3119 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 3276 : 103 chars : um(i,:), vm(i,:), rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), &
line 3591 : 111 chars : !$acc X_nl_all_levs, X_mixt_comp_all_levs, lh_sample_point_weights, mu_x_1_n, mu_x_2_n, &
line 3593 : 104 chars : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped, &
line 3597 : 116 chars : !$acc pdf_params%cloud_frac_1, pdf_params%cloud_frac_2, pdf_params%cthl_1, pdf_params%cthl_2, &
line 3598 : 112 chars : !$acc pdf_params%crt_1, pdf_params%crt_2, pdf_params%stdev_chi_1, pdf_params%stdev_chi_2, &
line 3614 : 102 chars : wp2_zt = zm2zt_api( gr%nzm, gr%nzt, ngrdcol, gr, wp2, w_tol_sqd ) ! Positive definite quantity
line 3620 : 109 chars : thlm(i,:), p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), rtm(i,:), &! In
line 3621 : 109 chars : rcm(i,:), cloud_frac(i,:), wm_zt(i,:), wm_zm(i,:), wp2_zt(i,:), & ! In
line 3622 : 106 chars : hydromet(i,:,:), Nc_in_cloud(i,:), & ! In
line 3639 : 102 chars : Nccnm(i,:), & ! Inout
line 3640 : 117 chars : hydromet_mc(i,:,:), Ncm_mc(i,:), rcm_mc(i,:), rvm_mc(i,:), & ! Out
line 3641 : 107 chars : thlm_mc(i,:), hydromet_vel_zt(i,:,:), & ! Out
line 3642 : 102 chars : hydromet_vel_covar_zt_impc(i,:,:), & ! Out
line 3643 : 102 chars : hydromet_vel_covar_zt_expc(i,:,:), & ! Out
line 3644 : 110 chars : wprtp_mc(i,:), wpthlp_mc(i,:), rtp2_mc(i,:), & ! Out
line 3645 : 105 chars : thlp2_mc(i,:), rtpthlp_mc(i,:) ) ! Out
line 3669 : 103 chars : stats, i, & ! Inout
line 3670 : 103 chars : hydromet(i,:,:), hydromet_vel_zt(i,:,:), hydrometp2(i,:,:), & ! Inout
line 3671 : 103 chars : K_hm(i,:,:), Ncm(i,:), Nc_in_cloud(i,:), rvm_mc(i,:), & ! Inout
line 3672 : 103 chars : thlm_mc(i,:), err_info, & ! Inout
line 3673 : 101 chars : wphydrometp(i,:,:), wpNcp(i,:) ) ! Out
line 3682 : 106 chars : !$acc update device( rcm_mc, rvm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3735 : 104 chars : !$acc update host( rvm_mc, rcm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3832 : 112 chars : call stats_update( "brunt_term_time_avg", richardson_num_term_weight*richardson_num_term_time_avg, &
line 3858 : 101 chars : .and. stats%l_last_sample ) then ! only adapt grid when the average of the last
line 3987 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_scheme = ', time_microphys_scheme
line 3988 : 104 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_advance = ', time_microphys_advance
line 4108 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 4120 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 4121 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 4124 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 4126 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 4132 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 4133 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 4134 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 4135 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 4136 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 4137 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 4138 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 4139 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 4140 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 4141 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 4163 : 119 chars : if ( thlm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( thlm_sponge_damp_profile )
line 4164 : 118 chars : if ( rtm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( rtm_sponge_damp_profile )
line 4165 : 117 chars : if ( uv_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( uv_sponge_damp_profile )
line 4166 : 118 chars : if ( wp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp2_sponge_damp_profile )
line 4167 : 118 chars : if ( wp3_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp3_sponge_damp_profile )
line 4168 : 122 chars : if ( up2_vp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( up2_vp2_sponge_damp_profile )
line 4843 : 104 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 4851 : 106 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 4865 : 101 chars : 'be used for cases with forcings from an input file and for the atex ', &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_tuner.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 654 : 102 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_driver_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 71 : 107 chars : write(fstderr, *) "This section ensures that everything allocated in init_clubb_case will be deallocated"
line 72 : 102 chars : write(fstderr, *) "in clean_up_clubb. This may cause a runtime error if there is a mismatch between"
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_clubb_core_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1876 : 101 chars : stats, & ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_xm_wpxp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 779 : 101 chars : call wpxp_term_pr1_lhs( nzm, ngrdcol, gr, C6rt_Skw_fnc, C6thl_Skw_fnc, C7_Skw_fnc, & ! Intent(in)
line 780 : 101 chars : invrs_tau_C6_zm, l_scalar_calc, & ! Intent(in)
line 781 : 102 chars : lhs_pr1_wprtp, lhs_pr1_wpthlp, lhs_pr1_wpsclrp ) ! Intent(out)
line 854 : 102 chars : stats, & ! InOut
line 855 : 101 chars : rtm, wprtp, thlm, wpthlp, sclrm, wpsclrp, & ! InOut
line 856 : 101 chars : err_info ) ! InOut
line 896 : 101 chars : stats, & ! InOut
line 4881 : 108 chars : tmp_zm_stats(i,k) = (-gamma_over_implicit_ts*lhs_ta_wpxp(2+gr%grid_dir_indx,i,k)) * wpxp(i,km1) &
line 4883 : 105 chars : + (-gamma_over_implicit_ts*lhs_ta_wpxp(2-gr%grid_dir_indx,i,k)) * wpxp(i,kp1)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/sfc_varnce_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 723 : 105 chars : call sfc_varnce_check( sclr_dim, wp2(i,gr%k_lb_zm), up2(i,gr%k_lb_zm), & ! intent(in)
line 724 : 105 chars : vp2(i,gr%k_lb_zm), thlp2(i,gr%k_lb_zm), rtp2(i,gr%k_lb_zm), & ! intent(in)
line 725 : 105 chars : rtpthlp(i,gr%k_lb_zm), sclrp2(i,gr%k_lb_zm,:), & ! intent(in)
line 726 : 105 chars : sclrprtp(i,gr%k_lb_zm,:), sclrpthlp(i,gr%k_lb_zm,:), & ! intent(in)
line 727 : 108 chars : err_info ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/grid_adaptation_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 128 chars : write(fstderr, *) "The fixed minimum grid density momentum heights need to cover at least the domain of the physics grid."
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/pdf_parameter_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 101 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 298 : 102 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 300 : 101 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/clubb_api_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2430 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
line 2497 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/stats_clubb_utilities.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 129 : 101 chars : wp2_zt, thlp2_zt, wpthlp_zt, wprtp_zt, rtp2_zt, rtpthlp_zt, up2_zt, vp2_zt, upwp_zt, vpwp_zt, &
line 130 : 101 chars : wpup2, wpvp2, a3_coef_zt, wp3_on_wp2_zt, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_windm_edsclrm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 493 : 102 chars : stats ) ! intent(inout)
line 501 : 102 chars : stats ) ! intent(inout)
line 953 : 103 chars : call windm_edsclrm_rhs( nzm, nzt, ngrdcol, gr, windm_edsclrm_scalar, dt, & ! intent(in)
line 954 : 103 chars : lhs_diff, edsclrm(:,:,edsclr), & ! intent(in)
line 955 : 103 chars : edsclrm_forcing(:,:,edsclr), & ! intent(in)
line 956 : 103 chars : rho_ds_zm, invrs_rho_ds_zt, & ! intent(in)
line 957 : 103 chars : l_imp_sfc_momentum_flux, wpedsclrp(:,gr%k_lb_zm,edsclr), & ! intent(in)
line 958 : 106 chars : stats, & ! intent(inout)
line 959 : 104 chars : rhs(:,:,edsclr) ) ! intent(out)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/setup_clubb_pdf_params.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 55 : 104 chars : subroutine setup_pdf_parameters_api( gr, nzm, nzt, ngrdcol, pdf_dim, hydromet_dim, dt, & ! Intent(in)
line 3823 : 104 chars : ! Correlation (in-precip) of chi (old s) and the precipitating hydrometeor in PDF component 1.
line 3827 : 104 chars : ! Correlation (in-precip) of chi (old s) and the precipitating hydrometeor in PDF component 2.
line 3841 : 104 chars : ! Correlation (in-precip) of eta (old t) and the precipitating hydrometeor in PDF component 1.
line 3845 : 104 chars : ! Correlation (in-precip) of eta (old t) and the precipitating hydrometeor in PDF component 2.
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/parameters_tunable.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 839 : 106 chars : / sqrt( 4.0_core_rknd * ( 1.0_core_rknd - 0.4_core_rknd )**3 &
line 840 : 118 chars : + clubb_params(ngrdcol,iSkw_max_mag)**2 ) ) ) ! Known magic number
line 902 : 117 chars : mult_factor_zt(i) = 1.0_core_rknd + clubb_params(i,imult_coef) * log( avg_deltaz(i) / grid_spacing_thresh )
line 917 : 104 chars : nu_vert_res_dep%nu10(i) = clubb_params(i,inu10) * mult_factor_zt(i) !We're unsure of the grid
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/mono_flux_limiter.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 700 : 104 chars : !$acc parallel loop gang vector collapse(2) default(present) reduction(.or.:l_any_adjustment_needed)
line 851 : 121 chars : ! MONOFLUX TEST COMMENT DO NOT REMOVE if( any(wpxp_net_adjust /= 0.0) ) write(fstderr,*) "MONOFLUX: wpxp adjusted "
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/model_flags.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 315 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 541 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 845 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 4: module err_info_type_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 265 : 102 chars : write(err_info%err_header_global,'(A38, I3, A15, I3, A, A28, A33, F6.2, A1, F6.2, A, A39, A40)') &
line 276 : 105 chars : write(err_info%err_header(i),'(A38, I3, A15, I3, A, A22, I2, A11, F6.2, A13, F6.2, A, A39, A40)') &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/penta_bicgstab_solver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 419 : 110 chars : ! It's interesting to see how close E_inv is to the lhs diagonal, it's usually (visually) very close, but
line 420 : 104 chars : ! using it instead of E_inv requires so many more iterations (use it would be jacobi preconditioner)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_wp2_wp3_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 928 : 101 chars : stats, & ! intent(inout)
line 1742 : 105 chars : stats_tmp_zt(i,k) = - gamma_over_implicit_ts * wp3_term_ta_lhs_result(5,i,k) * wp3(i,k-1) &
line 1743 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(4,i,k) * wp2(i,k) &
line 1744 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(3,i,k) * wp3(i,k) &
line 1745 : 105 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(2,i,k) * wp2(i,k+1) &
line 1746 : 103 chars : - gamma_over_implicit_ts * wp3_term_ta_lhs_result(1,i,k) * wp3(i,k+1)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/fill_holes.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 234 : 113 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 240 : 105 chars : write(fstderr, *) "column", i, " field average = ", sum(field(i,:) * rho_ds(i,:) * dz(i,:)) &
line 584 : 102 chars : ! rho_ds_dz(i,k-num_hf_draw_points:k+num_hf_draw_points))
line 823 : 110 chars : * min( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 828 : 106 chars : + mass_fraction * ( min( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
line 833 : 110 chars : * max( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 840 : 108 chars : + mass_fraction * ( max( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/stats_netcdf.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 281: subroutine stats_init_api( registry_path, output_path, ncol, stats_tsamp, stats_tout, dt_main, &
line 489: subroutine stats_finalize_api( stats, err_info )
line 565: subroutine stats_type_initialize( ncol, defs, ndefs, zt, zm, stats, ierr, rad_zt, rad_zm )
line 716: subroutine stats_open_netcdf( output_path, time_units, &
line 951: subroutine stats_begin_timestep_api( itime, stats )
line 1001: subroutine stats_end_timestep_api( time_value, stats, err_info )
line 1052: subroutine stats_update_scalar( name, values, stats, icol, level )
line 1112: subroutine stats_update_1d( name, values, stats, icol )
line 1171: subroutine stats_update_2d( name, values, stats )
line 1229: subroutine stats_begin_budget_scalar( name, values, stats, icol )
line 1275: subroutine stats_begin_budget_1d( name, values, stats, icol )
line 1328: subroutine stats_begin_budget_2d( name, values, stats )
line 1369: subroutine stats_update_budget_scalar( name, values, stats, icol, level )
line 1419: subroutine stats_update_budget_1d( name, values, stats, icol )
line 1468: subroutine stats_update_budget_2d( name, values, stats )
line 1508: subroutine stats_finalize_budget_scalar( name, values, stats, icol, l_count_sample )
line 1574: subroutine stats_finalize_budget_1d( name, values, stats, icol, l_count_sample )
line 1647: subroutine stats_finalize_budget_2d( name, values, stats, l_count_sample )
line 1710: subroutine stats_avg_and_write( time_value, stats, ierr )
line 1836: subroutine stats_grid_init( ncol, zt_src, zm_src, zt_tgt, zm_tgt, &
line 1898: subroutine stats_update_grid( zt_src, zm_src, rho_vals, rho_levels, p_sfc, stats )
line 1976: subroutine stats_lh_samples_init( num_samples, nzt, nl_var_names, u_var_names, zt_vals, &
line 2095: subroutine stats_lh_samples_write_lognormal( samples, stats, err_info )
line 2148: subroutine stats_lh_samples_write_uniform( uniform_vals, mixture_comp, sample_weights, &
line 2364: subroutine stats_lookup_append( stats, id )
line 2406: subroutine stats_lookup_reject_append( stats, name )
line 2520: subroutine stats_read_registry_namelist( path, defs, ndefs, ierr )
line 2595: subroutine stats_expand_registry( sclr_dim, edsclr_dim, defs, ndefs, hydromet_list )
line 2896: subroutine add_expanded_def( base_def, name, out_defs, nout )
line 2946: subroutine parse_registry_line( line, def, l_valid )
line 3020: subroutine split_registry_fields( line, fields, nfields )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/stats_netcdf.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 235 : 103 chars : logical :: l_last_sample = .false. ! True if we want to output at the end of this sample
line 237 : 104 chars : logical :: l_different_output_grid = .false. ! True if we need to remap the variables before output
line 238 : 102 chars : logical :: l_output_rad_files = .false. ! True if we want to output radiation grid variables
line 526 : 101 chars : if ( allocated( stats%grid%rho_lin_spline_vals ) ) deallocate( stats%grid%rho_lin_spline_vals )
line 527 : 105 chars : if ( allocated( stats%grid%rho_lin_spline_levels ) ) deallocate( stats%grid%rho_lin_spline_levels )
line 803 : 104 chars : ret_code = nf90_def_var( stats%ncid, "time", NF90_DOUBLE, (/ stats%time_dimid /), stats%time_varid )
line 808 : 101 chars : ret_code = nf90_def_var( stats%ncid, "col", NF90_DOUBLE, (/ stats%col_dimid /), stats%col_varid )
line 828 : 121 chars : ret_code = nf90_def_var( stats%ncid, "lh_zt", NF90_DOUBLE, (/ stats%lh_2d%lh_zt_dimid /), stats%lh_2d%lh_zt_varid )
line 835 : 112 chars : ret_code = nf90_def_var( stats%ncid, "rad_zt", NF90_DOUBLE, (/ stats%rad_zt_dimid /), stats%rad_zt_varid )
line 839 : 112 chars : ret_code = nf90_def_var( stats%ncid, "rad_zm", NF90_DOUBLE, (/ stats%rad_zm_dimid /), stats%rad_zm_varid )
line 849 : 109 chars : ret_code = nf90_def_var( stats%ncid, "param", NF90_DOUBLE, (/ stats%param_dimid /), stats%param_varid )
line 853 : 101 chars : (/ stats%param_strlen_dimid, stats%param_dimid /), stats%param_name_varid )
line 912 : 110 chars : ret_code = nf90_put_att( stats%ncid, stats%vars(i)%varid, "long_name", trim( stats%vars(i)%long_name ) )
line 913 : 102 chars : ret_code = nf90_put_att( stats%ncid, stats%vars(i)%varid, "units", trim( stats%vars(i)%units ) )
line 920 : 108 chars : ret_code = nf90_put_var( stats%ncid, stats%col_varid, [( real( i, kind=core_rknd ), i=1, stats%ncol )] )
line 940 : 109 chars : ret_code = nf90_put_var( stats%ncid, stats%param_varid, [( real( i, kind=core_rknd ), i=1, nparams )] )
line 1796 : 101 chars : stats%grid%gr_source, stats%grid%gr_output, stats%vars(i)%nz, &
line 1797 : 107 chars : real( stats%vars(i)%buffer, kind=core_rknd ), stats%vars(i)%out_nz, &
line 1798 : 114 chars : size( stats%grid%rho_lin_spline_vals, 2 ), stats%grid%rho_lin_spline_vals, &
line 1954 : 101 chars : if ( allocated( stats%grid%rho_lin_spline_vals ) ) deallocate( stats%grid%rho_lin_spline_vals )
line 1955 : 105 chars : if ( allocated( stats%grid%rho_lin_spline_levels ) ) deallocate( stats%grid%rho_lin_spline_levels )
line 2397 : 116 chars : if ( stats%lookup%cache_len > 0 ) tmp(1:stats%lookup%cache_len) = stats%lookup%cache(1:stats%lookup%cache_len)
line 2442 : 105 chars : tmp(1:stats%lookup%reject_cache_len) = stats%lookup%reject_cache(1:stats%lookup%reject_cache_len)
line 2509 : 101 chars : write(date(32:33),'(i2.2)') nint( ( ( real( mod( nint( st_time ),3600 ),kind=time_precision ) / &
line 2586 : 101 chars : write( fstderr,* ) "Invalid stats registry entry (expected: name | grid | units | long_name)"
line 2687 : 101 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2688 : 101 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2695 : 101 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2696 : 101 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2703 : 101 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_1",out_defs,k)
line 2704 : 101 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_2",out_defs,k)
line 2711 : 113 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_1", &
line 2715 : 113 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_2", &
line 2721 : 101 chars : call add_expanded_def(base_def,"corr_w_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2722 : 101 chars : call add_expanded_def(base_def,"corr_w_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2729 : 103 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2730 : 103 chars : call add_expanded_def(base_def,"corr_chi_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2737 : 103 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2738 : 103 chars : call add_expanded_def(base_def,"corr_eta_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2745 : 103 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_1_n",out_defs,k)
line 2746 : 103 chars : call add_expanded_def(base_def,"corr_Ncn_"//trim(hydromet_list(j)( 1:2 ))//"_2_n",out_defs,k)
line 2753 : 115 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_1_n", &
line 2757 : 115 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"_2_n", &
line 2794 : 112 chars : trim( hydromet_list(j2)( 1:min( 2,len_trim( hydromet_list(j2) ) ) ) )//"p", &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_xp2_xpyp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1320 : 101 chars : sclrprtp(:,:,sclr) ) ! Intent(inout)
line 1353 : 102 chars : sclrpthlp(:,:,sclr) ) ! Intent(inout)
line 3042 : 101 chars : stats_tmp(i,k) = (-gamma_over_implicit_ts * lhs_ta(2+gr%grid_dir_indx,i,k)) * xapxbp(i,km1) &
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 20 check(s) failed.
CLUBBStandardsCheck.py has begun.
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_cmake_test/src/SILHS/mt95.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 362: subroutine init_by_type( put, get )
line 382: subroutine init_by_scalar( put )
line 413: subroutine init_by_array( put )
line 461: subroutine next_state( )
line 593: subroutine genrand_int32_0d( y )
line 614: subroutine genrand_int32_1d( y )
line 629: subroutine genrand_int32_2d( y )
line 644: subroutine genrand_int32_3d( y )
line 659: subroutine genrand_int32_4d( y )
line 674: subroutine genrand_int32_5d( y )
line 689: subroutine genrand_int32_6d( y )
line 704: subroutine genrand_int32_7d( y )
line 720: subroutine genrand_int31_0d( y )
line 732: subroutine genrand_int31_1d( y )
line 747: subroutine genrand_int31_2d( y )
line 762: subroutine genrand_int31_3d( y )
line 777: subroutine genrand_int31_4d( y )
line 792: subroutine genrand_int31_5d( y )
line 807: subroutine genrand_int31_6d( y )
line 822: subroutine genrand_int31_7d( y )
line 838: subroutine genrand_real1_0d( r )
line 853: subroutine genrand_real1_1d( r )
line 868: subroutine genrand_real1_2d( r )
line 883: subroutine genrand_real1_3d( r )
line 898: subroutine genrand_real1_4d( r )
line 913: subroutine genrand_real1_5d( r )
line 928: subroutine genrand_real1_6d( r )
line 943: subroutine genrand_real1_7d( r )
line 959: subroutine genrand_real2_0d( r )
line 974: subroutine genrand_real2_1d( r )
line 989: subroutine genrand_real2_2d( r )
line 1004: subroutine genrand_real2_3d( r )
line 1019: subroutine genrand_real2_4d( r )
line 1034: subroutine genrand_real2_5d( r )
line 1049: subroutine genrand_real2_6d( r )
line 1064: subroutine genrand_real2_7d( r )
line 1080: subroutine genrand_real3_0d( r )
line 1095: subroutine genrand_real3_1d( r )
line 1110: subroutine genrand_real3_2d( r )
line 1125: subroutine genrand_real3_3d( r )
line 1140: subroutine genrand_real3_4d( r )
line 1155: subroutine genrand_real3_5d( r )
line 1170: subroutine genrand_real3_6d( r )
line 1185: subroutine genrand_real3_7d( r )
line 1201: subroutine genrand_res53_0d( r )
line 1218: subroutine genrand_res53_1d( r )
line 1233: subroutine genrand_res53_2d( r )
line 1248: subroutine genrand_res53_3d( r )
line 1263: subroutine genrand_res53_4d( r )
line 1278: subroutine genrand_res53_5d( r )
line 1293: subroutine genrand_res53_6d( r )
line 1308: subroutine genrand_res53_7d( r )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/SILHS/latin_hypercube_driver_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 113 : 101 chars : ! The uniform distribution corresponds to all the same variables as X_nl,
line 410 : 105 chars : !$acc update host(X_u_all_levs,l_in_precip,lh_sample_point_weights,X_mixt_comp_all_levs,k_lh_start)
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 2 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/wangara.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 104 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 105 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/mpace_a.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 272 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 273 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module prescribe_forcings_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 297 : 104 chars : !$acc enter data create( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 471 : 118 chars : !$acc update device( wm_zt, wm_zm, thlm_forcing, rtm_forcing, um_ref, vm_ref, sclrm_forcing, edsclrm_forcing )
line 911 : 103 chars : !$acc exit data delete( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 1114 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1118 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1122 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1123 : 112 chars : exner_zm(i,km1), exner_zm(i,k00), exner_zm(i,kp1), exner_zm(i,kp2) )
line 1126 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1127 : 108 chars : thlm_zm(i,km1), thlm_zm(i,k00), thlm_zm(i,kp1), thlm_zm(i,kp2) )
line 1130 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1131 : 104 chars : rtm_zm(i,km1), rtm_zm(i,k00), rtm_zm(i,kp1), rtm_zm(i,kp2) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/rico.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 159 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 160 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/dycoms2_rf02.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 121 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 122 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/bomex.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 127 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 128 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/dycoms2_rf01.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 91 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 92 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/gabls2.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 152 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 153 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/mpace_b.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 157 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 158 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/lba.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 96 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 97 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
line 176 : 101 chars : wpthlp_sfc(i) = convert_sens_ht_to_km_s( ( 270._core_rknd * ft**1.5_core_rknd ), rho_sfc(i) )
line 177 : 101 chars : wprtp_sfc(i) = convert_latent_ht_to_m_s( ( 554._core_rknd * ft**1.3_core_rknd ), rho_sfc(i) )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 11 check(s) failed.
No matches for /home/jenkins/workspace/clubb_cmake_test/src/KK_microphys/
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/pdf_parameter_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 558 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module rev_direction_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 233 : 113 chars : !seed used = -1102123834 1480475276 -248259584 525496705 1614213535 -1267052688 6290033 -78466652
line 234 : 127 chars : !seed_output = (/ -1102123834, 1480475276, -248259584, 525496705, 1614213535, -1267052688, 6290033, -78466652 /)
line 750 : 101 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 754 : 104 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
line 795 : 101 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 801 : 104 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 19: module fill_holes_tests
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 162 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 180 : 110 chars : if ( l_print_name ) print *, "filling holes of: easy_fill_test_"//trim(fill_type_names(fill_type))
line 195 : 121 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 241 : 118 chars : if ( l_print_name ) print *, "filling holes of: reverse_easy_fill_test_"//trim(fill_type_names(fill_type))
line 344 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 363 : 113 chars : if ( l_print_name ) print *, "filling holes of: below_thresh_test_"//trim(fill_type_names(fill_type))
line 385 : 103 chars : print *, "-- error", two * abs( initial_mass - new_mass ) / ( initial_mass + new_mass )
line 419 : 121 chars : if ( l_print_name ) print *, "filling holes of: reverse_below_thresh_test_"//trim(fill_type_names(fill_type))
line 430 : 116 chars : print *, "ERROR in below_thresh_test REVERSE MODE: method was not conservative in grid reverse mode"
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/spurious_source_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 502 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
[91m===============================================================
[91mCLUBBStandardsCheck FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_cmake_test/build/gcc_DEBUG_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
[93mBuild completed successfully, but some source code checks have failed.[0m
Running CMake ctests
Test project /home/jenkins/workspace/clubb_cmake_test/build/gcc_DEBUG_PRECdouble
Start 1: _init_output_dir
1/11 Test #1: _init_output_dir ................. Passed 0.06 sec
Start 2: bomex_100iter
2/11 Test #2: bomex_100iter .................... Passed 1.04 sec
Start 3: wangara_100iter
3/11 Test #3: wangara_100iter .................. Passed 0.93 sec
Start 4: fire_100iter
4/11 Test #4: fire_100iter ..................... Passed 1.03 sec
Start 5: atex_100iter
5/11 Test #5: atex_100iter ..................... Passed 1.49 sec
Start 6: rico_silhs_100iter
6/11 Test #6: rico_silhs_100iter ............... Passed 1.69 sec
Start 7: arm_97_50iter
7/11 Test #7: arm_97_50iter .................... Passed 1.89 sec
Start 8: cobra_100iter
8/11 Test #8: cobra_100iter .................... Passed 1.32 sec
Start 9: arm_r8029_100iter
9/11 Test #9: arm_r8029_100iter ................ Passed 1.27 sec
Start 10: arm_100iter_8col
10/11 Test #10: arm_100iter_8col ................. Passed 2.07 sec
Start 11: arm_1000iter_5dt
11/11 Test #11: arm_1000iter_5dt ................. Passed 3.82 sec
100% tests passed, 0 tests failed out of 11
Total Test time (real) = 16.62 sec
[92mAll tests passed.[0m
