Changes

Summary

1. Draft ChangeLog. (details)
2. fexcl additional task-dependent cosp variable (details)
3. always update netsw variable to be sent to coupler (details)
4. Finalize ChangeLog. (details)
5. rrtmgp lw works! (details)
6. ChangeLog update for cam6_4_081 (details)
7. Add is_moist_dycore and fix snapshots for CAM7 dme_adjust (details)
8. add initial attempt at type wrappers; code runs but answers are wrong (details)
9. Fixes for ERS restart test failure for CAM-chem with HEMCO (details)
10. Update HEMCO_CESM submodule to tag hemco-cesm2_1_0_hemco3_9_0 (details)
11. Update default path for hemco_config_file (details)
12. Add draft Changelog message (details)
13. Update default paths of hemco_diagn_file and hemco_data_root (details)
14. Remove new HEMCO Ln10 tests (details)
15. Address review comments. (details)
16. finish object wrappers; answers now match again (details)
17. remove duplicate code; add in fix from cam_development (details)
18. Jesses last review suggestions were good ones (details)
19. Update changelog (details)
20. code clean-up and adding comments (details)
21. move ccppized schemes to atmospheric_physics; fix indexing issues; clean-up cesm-log logging; add rrtmgp paths to configure (details)
22. update atmos_phys hash (details)
23. Update atmos_phys external tag (details)
24. Update git commit for atmos_phys (details)
25. update cloud chemistry (details)
26. update interface to calculate current calendar day on "host" side (details)
27. add doi references (details)
28. remove unused variable (details)
29. Update ChangeLog for cam6_4_083 (details)
30. revert the change in testlist_cam (details)
31. ChangeLog draft (details)
32. update CO2 access (details)
33. update ChangeLog (details)
34. Address review comments (details)
35. subset arrays in call to ccpp layers (details)
36. Changed to call raleigh_friction_run ccpp code directly from physpkg.F90 (details)
37. handle conditionally present pbuf fields (details)
38. Add ncol subsetting for ps (details)
39. Fix r8 (details)
40. Revert to using get_rlat_all_p because there is no r8 of get_lat_all_p (details)
41. Add atmos_phys0_12_000 atmos_phys official tag. (details)
42. Removing cam wrappers for rf ccpp init and run proceedures (details)
43. Finalize ChangeLog. (details)
44. Update ChangeLog with issue descriptions (details)
45. update to handle timestamped rpointer files (details)
46. corrections for st_archive tests (details)
47. Replace magic numbers 287.15 with rair in physconst (details)
48. update ccs_config submodule (details)
49. update h2o2 production (details)
50. Update atmos_phys submodule to new tag atmos_phys0_13_000 (details)
51. make consistant with model code (details)
52. update HLC and reaction rate parameters and algorithms (details)
53. Fixed namelist read bug by initializing nl variables (details)
54. Implement the computation of relative vorticities at cell points (details)
55. Pass relative vorticities to physics buffer during dynamics-physics coupling (details)
56. update ccs_config submodule (details)
57. update ccs_config submodule (details)
58. Allow moving mountain gravity wave scheme to be selected with MPAS dycore (details)
59. Add draft change log (details)
60. ChangeLog update (details)
61. remove terminator testmods (details)
62. only write radiation_init info to masterproc (details)
63. update ChangeLog (details)
64. Finalize ChangeLog for cam6_4_088. (details)
65. Always add FCHIST_GC test to pre-existing failures in ChangeLog (details)
66. fix interface bug; remove unnecessary argument from cloud optics scheme (details)
67. update atmospheric physics hash (details)
68. Added code to make st-archive handle DART files (details)
69. Draft of entry to satisfy development workflow recommendations (details)
70. define compset PC7 (details)
71. add description for PC7 (details)
72. add PC7 test (details)
73. Update externals to match alpha06f (details)
74. Update externals (details)
75. Add missing external (details)
76. Update externals one more time (details)
77. Update .gitmodules (details)
78. Move the division by cell area out of loop (details)
79. testlist updates (details)
80. Update cime (details)
81. Updates to ChangeLog for cam6_4_089 (details)
82. bypass some chem initialization for offline driver configurations (details)
83. fix ChangeLog (details)
84. fix indices for h2o2 params (details)
85. Import early version of GC 14.5.0-rc.0 (details)
86. Fixes for species lists and counts (details)
87. Use new aerosol optics directory rather than fast-jx for optical properties (details)
88. Update Cloud-J hash to version 8.0.1 (details)
89. Restrict Cloud-J initialization prints to single thread (details)
90. Update CHEM_INPUTS paths used in namelists (details)
91. Update GEOS-Chem tag to official 14.5.0 release (details)
92. Update to GEOS-Chem 14.5.1 (details)
93. Fixes for GEOS-Chem 14.5.x in CESM (details)
94. Remove HMS from dry/wetdep list as no matching data in species db. (details)
95. Update dep_data_file to a new version containing GEOS-Chem 14.5 species (details)
96. Update externals version tags for GEOS-Chem and HEMCO_CESM/HEMCO (details)
97. Replace numerical recipe with existing function in shr_spfn_erfc (details)
98. Initial changelog updates (details)
99. Update changelog (details)
100. Add testing for CAM7 low top with MPAS dynamical core (details)
101. update testing; cam7 radiation diagnostics (details)
102. update ChangeLog (details)
103. Update change log with reviewers and test information (details)
104. Change to test on mpasa480 grid (details)
105. Work around missing input data for CTSM on mpasa480 grid (details)
106. Update change log with revised test information (details)
107. fix physics-dynamics coupling bugs for MPAS (details)
108. update Changelog (details)
109. Changelog (details)
110. inadvertedly modified ChangeLog (details)
111. MPAS dp_coupling bug fixes (details)
112. change ERR test to ne16pg3; cleanup ncdata entries (details)
113. trial commit for merge up to 90 (details)
114. cappa->cappav in MPAS dp_coupling layer (details)
115. incl. pmiddry in fix (details)
116. Update change log with final test information (details)
117. Initial move of hb_diff code into atmos_phys. (details)
118. Dechunkize, remove pcols from compute_vdiff; general cleanup of compute_vdiff for future CCPPization (details)
119. Update src/dynamics/mpas/dp_coupling.F90 (details)
120. Update src/dynamics/mpas/dp_coupling.F90 (details)
121. mods for nag-7 (details)
122. ChangeLog update (details)
123. make code compile (details)
124. Clean up compute_vdiff unused arguments; use dependencies (details)
125. update hash; add interstitial q variables (details)
126. ChangeLog updates for cam6_4_092 (details)
127. namelist defaults and ChangeLog updates (details)
128. ChangeLog update (details)
129. update .gitmodules (details)
130. Reword comment for readability (details)
131. update .gitmodules (details)
132. update radiation interface and bring in pio reader (details)
133. update .gitmodules (details)
134. Remove oop fieldlist in compute_vdiff and replace with logical array (details)
135. update pio reader and rad interface (details)
136. fix testlist; final ChangeLog (details)
137. fixes for pio reader (details)
138. update hash (details)
139. Add comments (details)
140. Fix wxie sms test diff due to wrong if and clause (details)
141. modify outfrq9s_mpasa120 (details)
142. fix issue with NaNs in AurIPRateSum (details)
143. Move diffusion solver for non-WACCM to atmos_phys (details)
144. set default namelist ops and config nlevs for waccmx ne120 (details)
145. Fix bit-for-bitness in toa interface temperature interpolation for waccm-x vertical diff. (details)
146. default IC file and pelayout on derecho (details)
147. add mpasa120 test (details)
148. add min temperature namelist option (details)
149. more default namelist settings (details)
150. add conditional to calc_frontogenesis (details)
151. modify MPAS frontogenesisAngle calc as done in SE (details)
152. ChangeLog draft (details)
153. ChangeLog update (details)
154. Added line to archive .i. files as both restarts and history (details)
155. Separate out vertical_diffusion_compute; tau_damp_rate (details)
156. update MPAS testing; bugfix in config_component.xml (details)
157. update to cime6.1.102 (details)
158. update cime submodule (details)
159. update ChangeLog (details)
160. add high-res waccmx test; update namelist defaults (details)
161. correct path of default IC file (details)
162. An alternative for TEM diagnostics (details)
163. Update externals to match cesm3_0_beta06 (details)
164. update externals for git-fleximod (details)
165. update default pes for mpasa120 on derecho (details)
166. address review comments (details)
167. remove unused testmods outfrq3s_refined (details)
168. Changes suggested by code reviewer (details)
169. Fix typos (details)
170. test updates (details)
171. update ChangeLog (details)
172. Fix cosp test and final ChangeLog for cam6_4_096 (details)
173. Exercise the TEM diags in an aux_cam test (details)
174. ChangeLog draft (details)
175. ChangeLog update (details)
176. update namelist description (details)
177. subset arguments to ncol (details)
178. address review comments (details)
179. take another stab at the open acc directives (details)
180. fixes to appease the nag compiler; update atmos_phys hash (details)
181. removed comments (details)
182. fix url in cmeps submodule (details)
183. typo (details)
184. add NATLx8 grid (details)
185. update acc directives; remove redundant lowercasing (details)
186. address reviewer comments (details)
187. update git-fleximod (details)
188. add FHIST_C4 (details)
189. refactor setting stream_ndep_year_* variables (details)
190. testing updates (details)
191. replace L32 inic (details)
192. updated ccs_config, but NOT cmeps as it causes a clm compile error (details)
193. update to atmospheric_physics tag (details)
194. final changelog (details)
195. address review comments (details)
196. resolve merge conflicts (details)
197. still trying to fix ChangeLog (details)
198. fix issues 1326 and 1332; update ChangeLog (details)
199. update rrtmgp interfaces (details)
200. updated cmeps and ctsm tags in gitmodule (details)
201. Add use of new set of vdiff interstitials (details)
202. update atmospheric_physics hash (details)
203. Update interface; fix build bugs (details)
204. add changelog (details)
205. Write cam_in%cflx for all constituents, not just Q (details)
206. Fix typo (details)
207. Add the "_mpas" suffix to MPAS-specific output variables (details)
208. Change the dimension name of MPAS-specific output variables from "nCells" to "ncol" (details)
209. testing updates (details)
210. Remove unused arguments (details)
211. Remove unused code from comment (details)
212. fixes for file-io integration (details)
213. cleanup; fix rrtmg interface (details)
214. Remove initials, change inequality checks to modern fortran, remove old dependencies, clean up obsolete cloud water fields. (details)
215. Prepend COSP-related namelist fields with "cosp_" and add more complete descriptions. Remove commented line from bld/configure (details)
216. move cloud back; new atmos phys module (details)
217. initial changes (details)
218. remove unused argument (details)
219. update test (details)
220. Finalize ChangeLog. (details)
221. wip; schemes build but need to update radiation interfaces (details)
222. test updates (details)
223. update tests (details)
224. update tests (details)
225. address review comments (details)
226. fix testlist_cam.xml (details)
227. Reorder tautms/taublj add terms for future vertical diffusion refactoring (details)
228. move ERI test (details)
229. modify radiation.F90 (details)
230. back out last minute ERI test (not working) and update ChangeLog (details)
231. update rrtmgp tag (details)
232. add diagnostic output for BAM cloud chemistry (details)
233. update imports and Makefile following COSPv2.0 reorg (details)
234. working cloud optics and mcica (details)
235. add ERI tests (details)
236. Correct COSP utils path in Makefile (details)
237. Update cosp2 repo information for git fleximod (details)
238. add FHIST_C5 (details)
239. remove QPC5HIST (details)
240. Address error in CESM build with COSP but not RTTOV. (details)
241. Change cosp2 git fleximod reference to a stable hash following recommendation from cacraig (details)
242. Missed correction (details)
243. update cosp_rad_diags testmods (details)
244. fix cosp_rad_diags testmods (details)
245. working gas optics run phase (details)
246. ChangeLog entries (details)
247. update cosp_rad_diags testmods (details)
248. update atmos phys hash (details)
249. working gas optics pre (details)
250. new hash; use rrtmgp_sw_main_run (details)
251. update atmos phys (details)
252. move rrtmgp external to atmospheric-physics (details)
253. new hash (details)
254. new atmos_phys hash (details)
255. Update git submodule tags to match fxtag in .gitmodules for git-fleximod. (details)
256. Update git submodule tags to match fxtag in .gitmodules for git-fleximod (2). (details)
257. Finalize ChangeLog. (details)
258. add missing text in changelog (details)
259. Update cospsimulator_intr.F90 logic to work with new namelist variables. (details)
260. Correct allocation and assignment of cospstateIN%hgt_matrix_half.  Per cosp.F90 this array should be: (details)
261. Clean up print statement (details)
262. Copy cloud fraction to ast (stratiform_cloud_area_fraction) for pbuf snapshot (details)
263. At logic to masking that allows for swaths to work correctly. (details)
264. Revert "Clean up print statement" (details)
265. Revert "Merge pull request #1343 from jimmielin/hplin/vdiff_answer_change" (details)
266. Revert changes for comparison of swathed fields. (details)
267. Clean up print statements (details)
268. ... wrong cloud field (use stratiform cloud not rh cloud) (details)
269. latest atmosphys hash; update to latest file io reader interfaces (details)
270. Correct cld_cal_un outfld call to outside of if statement (details)
271. update ccs_config submodule (details)
272. Update COSPv.20 tag (details)
273. update ChangeLog (details)
274. Fixes for atmospheric chemistry horizontal and vertical interpolation routines. (details)
275. update ChangeLog (details)
276. Update ChangeLog (details)
277. Share some input files and settings from EarthWorks (details)
278. update submodule; fix interfaces (details)
279. Don't contribute 93L files, avoid NaNs (details)
280. Remove ncdata with NaNs, mpasa 93L real-data (details)
281. modifying rrtmgp to work with fomichev nlte (details)
282. fixes for new io reader, added src/utils/cam_ccpp/pio_reader.F90  and src/utils/cam_ccpp/pio_reader_sub.F90 These are slated to come in with a future tag by Courtney (details)
283. fix  bug in ttend_sh declaration and add the diagnostic templates for gw to the sima diagnostic directory (details)
284. add offline dynamics logic back in (details)
285. Update atmos_phys external location (details)
286. cam7 satellite tracks and local tod (details)
287. Update atmos_phys hash (details)
288. update hash; update interfaces to calculate_net_heating_run (details)
289. Fix runtime errors -- batch 1 (details)
290. build-namelist check: no cosp output to interpolated histfile (details)
291. update to latest pio reader (details)
292. Revert diffusion_solver and ChangeLog (details)
293. update cam5 test w/ mam7 aerosols (details)
294. correct allocation and assignment error for 'hgt_matrix_half' field (details)
295. Change request for CAM PR (details)
296. add FHIST_C5 test; remove uneeded QPC5 tests (details)
297. Continue cleanup; add interstitials; vramp to state (details)
298. Changes from John Dennis for robustness and reduce likelihood of memory leaks (details)
299. Update atmos_phys external (details)
300. Lift up gw_rdg io to host model level (details)
301. add testmods carma_cosp_subcol_rad (details)
302. Add CAM-SIMA submodule. (details)
303. Try sparse checkout of CAM-SIMA submodule. (details)
304. Use CAM-SIMA version instead of copy. (details)
305. Add back ending newline in .gitmodules file. (details)
306. Revert some (not all) of extra changes to minimize diffs with ESCOMP/CAM (details)
307. replace carma_cosp_subcol_rad by carma_cosp_rad_diag_mam (details)
308. new testmods for TMC test (details)
309. Further cleanup; add diag addflds following up on previous work (details)
310. Continue cleanup; move moving mountains to separate CCPP scheme (details)
311. Update submodule for testing (details)
312. Add p_top_for_rrtmgp namelist (details)
313. Improve robustness of ttend_dp handling (details)
314. Finish adding p_top_for_rrtmgp namelist (details)
315. update cam5 tests (details)
316. Update p_top_for_rrtmgp settings (details)
317. update cam5 tests (details)
318. Further cleanup (details)
319. remove unused parameters from calculate_net_heating call (details)
320. Update atmos_phys hash (details)
321. Address some review comments (details)
322. Revert back to original code for mpas/dp_coupling.F90 (details)
323. Refactor convective drag to separate CCPP schemes. (details)
324. Add calculation for N2_VMR (details)
325. Remove extraneous waccm logic from cam version of radheat (details)
326. restore radheat_disable_waccm (details)
327. CCPPize gw_oro -> gravity_wave_drag_orographic (details)
328. Use official atmos_phys tag (details)
329. Update ChangeLog for cam6_4_107 (details)
330. add missing r8s (details)
331. remove unused variables (details)
332. CCPPized Beres/convect; frontogenesis/igw; write diagnostics; remove obsolete diagnostics (details)
333. testing fixes (details)
334. Add missing diagnostics (details)
335. Reorganize modules (details)
336. Remove gw_drag.F90 in atmos_phys now using gw_common for inti. (details)
337. Reorder comment; fix typos in namelist_definition.xml (details)
338. add new directory to configure (details)
339. performance improvement from John Dennis (CISL) (details)
340. update ChangeLog (details)
341. update ChangeLog (details)
342. add support for nuopc write_restart_at_endofrun (details)
343. update atmospheric_physics tag (details)
344. update change log (details)
345. address copilot comments (details)
346. changelog updates (details)
347. Revert extraneous changes; updates to gw_common call (details)
348. Remove pio_reader copies. (details)
349. remove unused variables (details)
350. update ChangeLog (details)
351. Fix bugs found by Izumi/Nag. (details)
352. fix bug (details)
353. testing updates for subcols and cam4 (details)
354. update sw cloud optics arguments (details)
355. don't use graupel and snow cldfrac directly from pbuf (details)
356. testing updates for cam4 (details)
357. Update gw_dc_long (details)
358. Zero out HB below where CLUBB is active in the free_atm_diff scheme. (details)
359. Output clubbtop pbuf field as real by converting from integer (details)
360. Modifications to handle PUMAS external being moved to atmos_phys (details)
361. update atmos_phys external (details)
362. Simone's changes for fifth mode (details)
363. update atmos_phys external (details)
364. fix backwards compatibility issues (details)
365. add regression test (details)
366. update testing (details)
367. Use TEST_ONLY input file for reg test (details)
368. Update atmos_phys external (details)
369. cleanup; depointerize vramp (details)
370. Changes to support Cecile's latest runs (details)
371. update nvhpc/gpu test for cam7 (details)
372. cam should specify this requirement itself (details)
373. address reviewer comments (details)
374. update COSP tag to most current version 20250827 (details)
375. made blending consistent with p_top_for_{rad...} (details)
376. Update ChangeLog for cam6_4_110 (details)
377. Fix pointer corruption problems; output to pcols to fix output issues. (details)
378. Misc cleanup; movmtn diagnostics for CAM (details)
379. updates buildcpp to add support libraries (details)
380. Update mxdisg logic (details)
381. Remove unused namelist param (details)
382. improve backward compatiblity (details)
383. fix misconfigured silhs test (details)
384. fix ChangeLog (details)
385. move and rename p_top_for_rrtmgp; cleanup (details)
386. update FV3 tests (details)
387. remove residual use statement (details)
388. fix nl name (details)
389. add missing endrun use statement (details)
390. add missing use statement (details)
391. make nl variable public in waccm radheat; cleanup (details)
392. fix pumas file path (details)
393. remove unused variables from other radiation packages; update default to 2 (details)
394. add default default (details)
395. fix namelist default order (details)
396. Simplify backward compat interface for ridge as i/o will be done at host level for CAM and SIMA. (details)
397. update changelog (details)
398. update topo and solar_irrad file (details)
399. update change log (details)
400. Update for reviewer comments in atmos_phys. (details)
401. Use PBL diagnostics module in atmos_phys (details)
402. Change ztodt to dt in atmos_phys interfaces (details)
403. update change log (details)
404. Fix build (details)
405. grab latest atmos phys hash (details)
406. Merge in WACCM-X eddy_top handling to regular version. (details)
407. remove unused file - routines CCPPized and moved to atmospheric_phyics (details)
408. Update the CAM COSP driver for COSP2.1.8 (details)
409. Correct syntax and variable naming errors. COSP2 warm rain diagnostics are now being produced! (details)
410. Add COSP's MODIS LWP-REFF joint histograms to CESM (details)
411. Update pre-industrial solar forcing files to CMIP7 version (details)
412. change cam7 flag to apply_nonwv_cflx for clarity (details)
413. update ChangeLog (details)
414. update ChangeLog (details)
415. Add MODIS tau-pressure histograms for liquid and ice clouds. (details)
416. use official tag instead of hash for testing (details)
417. update submodule (details)
418. update ChangeLog (details)
419. Ridge interface init update; update gwx to pcols (details)
420. Revert back to CAM6 SolarForcing files for CAM6 use_cases (details)
421. Fix typos (details)
422. update atmospheric physics hash (details)
423. Update submodules (details)
424. Fix one more typo (details)
425. Correct units of cosp_prs, cosp_reffliq, and cosp_reffice coordinates. (details)
426. remove vars which no longer are in a structure for GPU test (details)
427. Update ChangeLog for cam6_4_114 (details)
428. Update gitmodules to match current alpha07d (details)
429. Update externals (details)
430. Update submodules (details)
431. Ridge interface init update (2) (details)
432. Making merge region more controllable. Re-instated 'tricking' of RRTMGP (details)
433. update rrtmgp_inputs_run interface; add mods to other radiation package radheat_tend calls (details)
434. fix the CAM+RRTMGP GPU interface bug (details)
435. update waccm radheat_tend interface to match (details)
436. Fix rei_cloud and rel_cloud units to um for CAM4 (details)
437. address Courtney's comment (details)
438. add back some spaces (details)
439. only add defaults when not running waccm physics (details)
440. update new ccs_config tag (details)
441. Separate out TMS/Beljaars (orographic form drag) from vertical diffusion section in physpkg. (details)
442. Fix CAM7 snapshotting (details)
443. Update externals (details)
444. use preprocessor tag chem_proc5_0_07 (details)
445. Initial changes (details)
446. initial changes (details)
447. restore bam optics diagnostics (details)
448. Update cime (details)
449. Update git-fleximod (details)
450. Update git-fleximod Github Actions workflow to match CESM alpha branch. (details)
451. Add emission files (details)
452. Add 1850 CAM7 regression tests (details)
453. add missing file (details)
454. added mlt heating. lowered mrg region (details)
455. some corrections (details)
456. Update from reviews (details)
457. Limit the new emission files to only ne30pg3 runs (details)
458. ChangeLog for cam6_4_115 (details)
459. Update atmos_phys tag and address reviewer comments (details)
460. use namelist defaults for all non-waccm physics (details)
461. Fix failing NAG test (details)
462. Add updated submodule (details)
463. Update atmos_phys external (details)
464. ChangeLog for cam6_4_116 (details)
465. Update cime external (details)
466. Split off Beres shallow/deep init (details)
467. Update externals one more time (details)
468. corrections for rrtmg optics (details)
469. unify diags (details)
470. Address review comments; check errflg at end of CCPPized vertical diffusion calls (details)
471. Update src/physics/cam/diffusion_solver_cam.F90 (details)
472. Update src/control/cam_snapshot_common.F90 (details)
473. Update src/physics/cam/eddy_diff_cam.F90 (details)
474. Update src/physics/cam/eddy_diff_cam.F90 (details)
475. Update src/physics/cam/molec_diff.F90 (details)
476. Update src/physics/cam/vertical_diffusion.F90 (details)
477. Update src/physics/cam/molec_diff.F90 (details)
478. Update src/physics/cam/vertical_diffusion.F90 (details)
479. Address review comments (2) (details)
480. volcanic aerosol optical props (details)
481. Fix build changes; do_beljaars logical move (details)
482. address review comments (details)
483. remote top_at_1 vestiges (details)
484. Fix TMS reset initialization in CAM7 (set to zero even if not used) (details)
485. Correct array constructor error. (details)
486. Update ccs_config external (details)
487. fix check of COSP with interpolated output (details)
488. ChangeLog for cam6_4_117 (details)
489. ChangeLog for cam6_4_117 (details)
490. Separate front and front_igw init in atmos_phys (details)
491. restore default history output (details)
492. code cleanup; use modal aerosol top level (details)
493. rename bam diags module (details)
494. add BAM debug diags (details)
495. Update emission files to use relative path (details)
496. update atmos phys tag and submodule (details)
497. remove unused imports (details)
498. align use statement (details)
499. remove erroneous subsetting (details)
500. top level correction (details)
501. add comments and misc cleanup (details)
502. ChangeLog for cam6_4_118 (details)
503. Rename directory for gravity_wave_drag. (details)
504. final changelog (details)
505. Draft Changelog. (details)
506. Update to atmos_phys atmos_phys0_18_000 (details)
507. Finalize ChangeLog for cam6_4_120 - complete CCPPization of HB and diffusion solver (details)
508. Update cosp submodule (details)
509. Add missing _r8 (details)
510. fix issues raised by code reviewer (details)
511. remove unicon (details)
512. ChangeLog for cam6_4_121 (details)
513. Update ChangeLog for cam6_4_121 (details)
514. fix NAG compiler error (details)
515. rm -ocn from configure; misc (details)
516. update ChangeLog (details)
517. Update topo files (details)
518. Update atmos_phys external (details)
519. Update submodules (details)
520. fix compiler bug (details)
521. Fix NAG compiler issues (details)
522. add comments, implement suluble / hydrophilic methods (details)
523. Apply changes to GPU code to allow for modified SW calling list (details)
524. ChangeLog for cam6_4_123 (details)
525. change nonhygro to insoluble, add comments (details)
526. update externals (details)
527. fix changelog (details)
528. remove unnecessary gpu directives (details)
529. update atmospheric physics tag (details)
530. ChangeLog update (details)
531. fix buildcpp (details)
532. update ChangeLog (details)
533. Pass in pi to gw_common initialization (details)
534. Update COSP external (details)
535. fix issue 1414 (frontogenesis function) for SE dycore (details)
536. update changelog (details)
537. Pass top taper to gw scheme and compute within ref_pres. (details)
538. revert ChangeLog for merge (details)
539. Add pverp to common and convective gw schemes. (details)
540. fix array out of bounds bug (details)
541. Change CISM2 to SGLC in FCHIST_GC compset (details)
542. remove commented out code (details)
543. fix more bugs for frontal scheme (details)
544. Update submodules (details)
545. Add missing _r8 (details)
546. remove CISM external (details)
547. Update ChangeLog for cam6_4_126 (details)
548. put fields in correct COSP simulator (details)
549. Add explicit assignment of CFODD DBZE and ICOD bin centers as targets to avoid dangling pointer error in NAG. (details)
550. Update gitmodules to COSP2.1.9 and handling of COSP sparse checkout. (details)
551. remove unset diags (details)
552. fix snapshot problem for cam7 compsets (details)
553. update rrtmgp interfaces; add constituent stubs to get atmospheric physics to build (details)
554. remove old subtrees (there were two) (details)
555. Squashed '.lib/git-fleximod/' content from commit d4ebd399 (details)
556. better vectorization for large NTRAC, ifdef for timers (details)
557. better performance for large tracer counts (details)
558. Revert changes to git-fleximod submodule.py for later merge with updated CAM development branch (details)
559. Update ChangeLog. (details)
560. dmleung added the effects of coarse-mode dust asphericity on dust optical thickening and on reducing gravitational settling. 26 Oct 2025 (details)
561. dmleung added history variables for more PM diagnostics. 26 Oct 2025 (details)
562. Address review comments; remove unused subs; check errflg throughout (details)
563. Modernize namelist read; fix errflg check (details)
564. Change pver+1 to pverp throughout in gw_drag_cam (details)
565. dmleung edited the mass fractions of the emitted dust size distribution, and modified the dust_emis_fact in namelist defaults for Leung_2023 accordingly. (details)
566. use waccm ne30pg3 default IC file (details)
567. Update interface init (details)
568. Remove save from gw_drag_cam; remove commented out code (details)
569. Update src/physics/cam/gw_drag_cam.F90 (details)
570. Address review comments (details)
571. Update COSP submodule to v2.1.9 (details)
572. dmleung changed the fine dust mass fraction, edited aerosol optics, and did code cleanup (details)
573. dmleung used ntot_amode to represent the coarse mode for each MAM version, and did more code cleanup (details)
574. dmleung did more code commenting and code cleanup. (details)
575. use n_coarse_dust to indicate the coarse dust mode; also fix a mistake in the PM output diagnostics (details)
576. Add 'CS_WR_CFODD_REFF_LARGE' to fexcl list in ERC test. (details)
577. Update ChangeLog. (details)
578. more robust way to determine coarse mode number; misc clean up (details)
579. more code clean up and commenting by dmleung (details)
580. dmleung edited dust_emis_fact for CAM6 and CAM7 in namelist_defaults (details)
581. dmleung add one more change in namelist_defaults for dust_emis_fact (details)
582. Initial cleanup of compute_eddy_diff; use CCPPized diffusion solver (details)
583. Remove pbl_utils; remove pcols from eddy_diff (details)
584. debugged the aerosol optics so that total AOD and aerosol radiative effects are corrected (details)
585. code cleanup for the aerosol optics module (details)
586. Start moving outfld history out from tentative run phase. (details)
587. Remove all diagnostic arrays from tentative run phase (details)
588. Move to atmos_phys. (details)
589. Refactor HB: move kinematic fluxes and obklen to common interstitial -- for UW/CLUBB share (details)
590. Merging up to clubb_release 1632cf12 (details)
591. Merging up to clubb_release 673beb05 (details)
592. Merging up to clubb_release dc302b95 (current basically) (details)
593. use vdiff interstitial for kinematic fluxes and obklen to CLUBB (details)
594. Small cleanups (details)
595. Update externals to match alpha07g (details)
596. inscrease the number of nodes for CONUS testing (details)
597. Change ztodt to dt; snapshot unit updates (details)
598. Update ChangeLog for cam6_4_129 (details)
599. Increase time limit for GPU tests (details)
600. Move `pmid`, `pint`, and `pdel` variables to dry diagnostics (details)
601. Update emission files (details)
602. remove buggy code (answer changes!) (details)
603. Fix cflx subsetting to UW ccppized scheme; fix snapshot unit (details)
604. Fix typos (details)
605. Making work with clubb_release d5957b30 (current as of 11-15-25) (details)
606. Definine PDFP_RTP2_CLUBB with the correct size. (details)
607. First step to making grid resversible in clubb_intr. This is BFB when clubb_grid_dir = 1, no BFB (as expected) with -1 (details)
608. Big improvements to flipping. Now almost all calculations are in cam grid, and flipping sections have been consolidated to directly around the time stepping loop. Next is to push them inward until the only clubb grid calculations are done inside advance_clubb_core. (details)
609. Consolidated ascending functionality as much as possible. Ascending vs descending BFB (except wp3_ta but that's internal and doesn't matter) - this is even true with clubb_cloudtop_cooling, clubb_rainevap_turb, and do_clubb_mf. (details)
610. Made silhs work in descending mode, though it is not BFB with the ascending mode, even though there is no notion of ascending in it. There must be some bug with the flipper perhaps? Otherwise an internal interaction between clubb and silhs somehow, it's very upsetting, but I think it's time to give up and come back to it someday. (details)
611. Mainly organization and some pbuf simplifications. No major redimensioning yet. All changes should be BFB, but a handful of field outputs are different above top_lev because I made it zero everything above top_lev. Among the fields that differ: some (RTM_CLUBB RTP2_CLUBB THLM_CLUBB UP2_CLUBB WP2_CLUBB) were being initiazed to a tolerance above top_lev, and others (THLP2_CLUBB RTP2_CLUBB UM_CLUBB VM_CLUBB) were never initialized or set above top_lev, so we were outputting random garbage. (details)
612. Safe and easy redimensionings (details)
613. Remove dead config code originally used by Eulerian dycore. (details)
614. Add ChangeLog for cam6_4_130 (details)
615. update argument list to match atmos phys (details)
616. Remove extraneous GEOS-Chem chemistry.F90 messages on restart; cleanup (details)
617. Add new MPAS 120 km L26 analytic ICs. (details)
618. The DANGEROUS redimensioning. This significantly reduces the memory footprint and data copying steps in clubb_intr, mainly by switching pbuf variables (which are mostly clubb_inouts) to have nzm or nzt dimensions, allowing them to be passed into clubb directly, making the copying/flipping step unnecesary. This was tested with a top_lev > 1, so it should be well tested. There were some above top_lev interactions found, which seem erroneous, so I've marked them with a TODO and a little explaination. (details)
619. Setting l_ascending_grid to false (details)
620. More simplifications and cleanup, all should be safe (details)
621. Mostly cosmetic improvements, some removal of redundant code (details)
622. use official atmos phys tag (details)
623. Update ChangeLog for cam6_4_131 (details)
624. merge up and being changelog (details)
625. Update ChangeLog for cam6_4_132 (details)
626. Fixing GPU code so that it runs to completion, correctness on GPU not confirmed yet. (details)
627. Update atmos_phys to atmos_phys0_19_000. (details)
628. Finalize ChangeLog for cam6_4_133. (details)
629. Removing some unccesary stuff from pbuf and moving a little code around. (details)
630. Small BFB improvements (details)
631. check history fields active before intergrating AOD, check allocate status (details)
632. Use aerosol_is instead of is_bulk (details)
633. Squashed '.lib/git-fleximod/' changes from d4ebd399..5796799a (details)
634. Update externals to match cesm3_0_alpha07h (details)
635. Update subtrees (details)
636. Update ChangeLog for cam6_4_134 (details)
637. fix the model_is method (details)
638. ChangeLog draft (details)
639. bring in update atmos phys (details)
640. rm rad_diag/user_nl_cpl (details)
641. ChangeLog update (details)
642. ChangeLog update (details)
643. ChangeLog update (details)
644. updates to mechanisms (details)
645. Removing print statements and a little cleanup (details)
646. GPU code changes. This passes the ECT test, using top_lev > 1, ne30pg3_ne30pg3_mt232, FHISTC_LTso, and comparing the GPU code to an intel baseline. (details)
647. log hrate info, set default ic file and O3S_Loss rate (details)
648. update default namelist settings (details)
649. update carma base tag and adjust for getwetr interface change (details)
650. Improving description of possible options for clubb_fill_holes_type (details)
651. update ne3pg3 ic file (details)
652. Renaming l_ascending_grid to clubb_l_ascending_grid and adding it to the namelist files (details)
653. add sparse checkout submodule ext_co2_cooling (details)
654. add option to use extended co2 cooling method (details)
655. implement configure switch to avoid nag compiler builds (details)
656. move to latest atmospheric physics mods for rrtmgp (details)
657. Receive and pass --non-local option in cam.case_setup.py (details)
658. update default WACCMX ne16pg3 IC file (details)
659. Various performance improvements (details)
660. updata regression tests (details)
661. use hygro from aero_props (phys props files) (details)
662. bring in atmos_phsy with gravity wave bug fix (details)
663. Update ChangeLog for cam6_4_136 (details)
664. fix threading issue (details)
665. use new atmospheric physics hash (details)
666. point to zero variable if pbuf fields not present (details)
667. use atmospheric physics tag (details)
668. add changelog entry (details)
669. bring in atmos phys; remove acc directives from radiation.F90 (details)
670. ChangeLog for cam6_4_138 (details)
671. clean up unused code (details)
672. remove sol_factb limiters (details)
673. remove the sol_factb_interstitial namelist setting (details)
674. Break up long lines (details)
675. change data type to i8 to support large domains (details)
676. Add CAM7 references to namelist descriptions (details)
677. Update LBC file for CAM7 use_cases (details)
678. Update two more use_cases with new LBC file (details)
679. ChangeLog for cam6_4_139 (details)
680. Preliminary ChangeLog (details)
681. Add missing subdirectory for LBC file (details)
682. Re-add COSP2 information to .gitmodules (details)
683. Update cime for an updated wget location for inputdata (details)
684. Update cime submodule (details)
685. Update ChangeLog for cam6_4_140 (details)
686. ChangeLog for cam6_4_142 (details)
687. ChangeLog for cam6_4_142 (details)
688. add DOI reference, set co2cooling to zero outside cpp ifdef (details)
689. fix FV frontogenesis bug and diagnostic PS/PSDRY bug in SE log file (details)
690. Add sponge layer fixes from @PeterHjortLauritzen (details)
691. Update atmos_phys with corresponding sponge fix (needs to be updated to official tag when tagged) (details)
692. Add diff_sponge_fac to build-namelist. (details)
693. Small updates for timing statements (details)
694. adjust cpp ifdefs (details)
695. add documentation for sponge layer option (details)
696. Update atmos_phys hash with latest sponge_bug_fix development code. (details)
697. ChangeLog draft (details)
698. ChangeLog updates (details)
699. mods from slh_chemistry branch (details)
700. adjust reg tests (details)
701. ChangeLog update (details)
702. add MAM4 test mods for SLH compsets (details)
703. TUV-x mods merged from tuvx_jun_cld branch (details)
704. Update cime tag and change timing on GPU tests back to 20 minutes (details)
705. fixed double flipping of 2 clubb_mf output arrays (details)
706. changes to clubb_mf to operate on descending arrays (details)
707. removed comment (details)
708. Adding code for the new coriolis code in clubb. Also updating the .gitmodules with a new tag (details)
709. tuvx lib build/cmake updates (details)
710. Update cime to fix failing multiinstance case (details)
711. more changes from Rafa (details)
712. Put back in submodule information (details)
713. Preliminary ChangeLog (details)
714. add r8 real kind specifiers (details)
715. Final ChangeLog for cam6_4_144 (details)
716. ChangeLog draft; fix typo (details)
717. Update to atmos_phys0_20_001 (details)
718. Update GPU test time to 45 minutes; add note on GPU test known failure (details)
719. Finalize ChangeLog for cam6_4_145. (details)
720. rearrange order test list (details)
721. ChangeLog draft (details)
722. Lousia's latest T1S and T4S mechanism files (details)
723. fix divide by zero issue (details)
724. bring in updated externals (details)
725. ChangeLog update (details)
726. Use ESMF conservative regridding (details)
727. Made ERI test check for Gregorian+spinup compset incompatibility (details)
728. Bring Makefile.in inline with COSP changes. (details)
729. use atmos phys hash and modified ccs_config (details)
730. Change out failing ERI test with a new SMS which still tests the same functionality (details)
731. Update ChangeLog for cam6_4_147 (details)
732. increase wallclock, use updated ccs_config (details)
733. use latest atmos phys dev hash (details)
734. changes for code review comments; remove unused modules (details)
735. beautify comment (details)
736. use atmospheric physics tag (details)
737. initial changelog mods (details)
738. use latest atmospheric physics tag (details)
739. adopt S1/S2 naming convention (details)
740. spunup O2 ICs; misc corrections (details)
741. Update cospsimulator_intr.F90 to COSP2.2.0 (part 1) (details)
742. update T1S1, T1S2, and T4S2 mechanisms (details)
743. scripts clean up as suggested by reviewer (details)
744. minor code cleanup (details)
745. minor cleanup (details)
746. futher changes per code review (details)
747. ChangeLog draft (details)
748. use tuv-x tag v0.14.1 (details)
749. replace muscia assert error handling with endrun in cam code (details)
750. ChangeLog update (details)
751. temporary edit to ChangeLog to eliminate merge conflict (details)
752. Final ChangeLog for cam6_4_150 (details)
753. ChangeLog update (details)
754. Rafa's namelist updates (details)
755. GEOS-Chem within CESM: fix MAM4 mapping for SO4 when aerosol distribution is not prescribed (details)
756. code clean up (details)
757. Add appropriate dependencies for radar simulator and shift MODIS histogram outputs to 4d for outfld call. This commit addresses a bug that occurred when cosp_lradar_sim was set to true in user_nl_cam. This bug is likely in all versions of CAM because it is unrelated to swathing and RTTOV features. (details)
758. Finalize ChangeLog for cam6_4_151. (details)
759. update discriptions of SLH scaling namelist params (details)
760. revert start data; clean up comments in usrxt (accept correction) (details)
761. ChangeLog update (details)
762. ChangeLog update (details)
763. Changes suggested by Rafa (details)
764. code cleanup (details)
765. add slh-chem regression tests (details)
766. update comment (details)
767. Use symbolic links for RTTOV *.a files and move dependency on $(RTTOVDIR)/build/Makefile.local directly into Makefile.rttov (details)
768. Add ccs_config for ifx compiler (details)
769. Add ccs_config for ifx compiler with CTSM and MOSART externals updated (details)
770. increase wallclock time on izumi tests (details)
771. ChangeLog update (details)
772. Create COSP-RTTOV_examples for documenting usage. (details)
773. remove unused routines (details)
774. Fixes for ifx compiler - division by zero in rrtmgp_inputs_cam.F90 (details)
775. Fixes for ifx compiler - zeroing out nan and fillvalues requires ensuring neither have nans first (details)
776. Fixes for ifx compiler: mpi tag overflow in edyn_mpi (details)
777. use tuv-x tag v0.14.2 (details)
778. revert test_driver.sh (details)
779. ne16pg3 configuration LT and MT out-of-the-box (details)
780. Update ChangeLog for cam6_4_154 (details)
781. Revert back to original .gitmodules (details)
782. Draft ChangeLog for cam6_4_155 (excluding nvhpc test in progress) (details)
783. Finalize ChangeLog for cam6_4_155. (details)
784. add L93 support for VR-SE grids, ne120pg3 (details)
785. Updates to set the RTTOV environment variable (details)
786. Remove commented out code (details)
787. fix issue with prescribed mode5 volc aerosols (details)
788. include mode5 in cesm_forcings output (details)
789. merged from rrtmgp_carma (details)
790. Point to correct locations for datm, satm and xatm (details)
791. redo rrtmgp reorganization; fix loop typo (details)
792. aerosol optics diags for bulk aerosols (details)
793. enable generation of optics props files (details)
794. Remove debug flag from COSP_SIMULATOR masterproc call. (details)
795. update use case files (details)
796. start ChangeLog (details)
797. ChangeLog update (details)
798. ChangeLog (details)
799. Update ccpp_constituent_prop_mod instantiate stub with diag_name (req for all new atmos_phys) (details)
800. use tuv-x tag v0.14.3 (details)
801. implement volume methods (details)
802. move aodvis accumulation outside vol check (details)
803. avoid divide by zeros (details)
804. adjust thresholds (details)
805. rad_cnst/aerosol abstract interface refactor and extension phases 1 through 4f plus cleanup (details)
806. fixup! phys_state subsetting cannot be assumed shape for chunking (details)
807. Fixes for snapshot output in GNU debug (details)
808. cleanup: use public active_calls; clean use statements (details)
809. Refactor aerosol_optics_cam to extract portable aerosol_optics_core (details)
810. Unify names for aerosol_mmr_cam to make port easier to CAM-SIMA. (details)
811. Clarify num_to_mass_aer, dryrad for modal, sectional; fix null pointer use in aerosol_optics_core. (details)
812. move zeroing out to further up in tphysbc; also fix cam7/tphysbc (details)
813. Sync radiative_aerosol_definitions.F90 with version in CAM-SIMA (details)
814. revert threshold changes (details)
815. add regression test (details)
816. namelist changes to support spin-up run (details)
817. Fix one additional namelist variable (details)
818. Add updated ndep file (details)
819. Address review comments (details)
820. More review changes (details)
821. Mods for dust for the spin-up run (details)
822. Address review comments (details)
823. ChangeLog for cam6_4_157 (details)
824. Update externals to match cem3_0_alph08l (details)
825. Preliminary ChangeLog (details)
826. Update src/physics/cam/aerosol_optics_cam.F90 (details)
827. Final ChangeLog for cam6_4_158 (details)
828. Remove strange dash that crept into comments (details)
829. Fix and update comments throughout. (details)
830. Use pointer optional argument as suggested by @fvitt; update comment further for idx_sw_diag duplication loop (details)
831. Remove dead code in modal_aero_data (migrated into modal_aerosol_state) (details)
832. Fix palb, pasm comment? in aerosol_optics_mod.F90 (details)
833. Updates for namelists for spin-up (details)
834. A workaround for ifx internal compiler error -- avoid -O3 optimization (details)
835. Bump up the time for a regression test (details)
836. update ChangeLog for cam6_4_159 (details)
837. update ChangeLog (details)
838. update ChangeLog (details)
839. fixes for root dirs in cesm blds (details)
840. ChangeLog (details)
841. ChangeLog update (details)
842. workarounds for gnu (details)
843. revert testlist_cam.xml (details)
844. add tests for two new VR-SE grids (details)
845. add default time-stepping for non mt VR-SE grids (details)
846. use new ESCOMP/ALI-ARMS tag (details)
847. update src/physics/ali_arms with correct hash (details)
848. Initial draft: bring in cldfrc2m into atmos_phys (details)
849. Fix silhs bug; improve subsetting (details)
850. use constant scale height (details)
851. Address review comments (details)
852. Update src/chemistry/aerosol/aerosol_state_mod.F90 (details)
853. Update src/physics/cam/nucleate_ice_cam.F90 (details)
854. Update src/chemistry/aerosol/aerosol_state_mod.F90 (details)
855. generalized optics_params method instead of concrete duplicate implementations (details)
856. remove modal_aero_data dependency in modal_aero_state_mod: refactor convcld_actfrac (details)
857. Fix typo throughout (details)
858. fix b4b issue (details)
859. ChangeLog (details)
860. ChangeLog update (details)
861. update comments (details)
862. Apply list_idx changes to new code in cam6_4_162 (details)
863. Fix bin_ndx -> bin_idx (this module mixes both) (details)
864. Comment updates (details)
865. implement o2 concentration check (details)
866. shift USE statements into subroutine scope when possible (details)
867. initial namelist updates (details)
868. Fix USE statements; sync up comments to CAM-SIMA copy (details)
869. resolved top_lev bug, only integrate energy up to top_lev (details)
870. switch back to bilinear interpolation, setup some TEM defaults (details)
871. set cam_physics_mesh to ATM_DOMAIN_MESH; check for conflicting namelist settings (details)
872. update test files; remove default zm history fields (details)
873. Update external and fix prim_state function (details)
874. Update external (details)
875. default code some hacks and fincl list in use case (details)
876. Finalize ChangeLog for cam6_4_163. (details)
877. restore some defaults; code clean up (details)
878. update local paths to input datasets (details)
879. Cleanup to address PR comments - https://github.com/ESCOMP/CAM/pull/1441 (details)
880. update paths to point to inputdata files (details)
881. fix 4 newly committed paths (details)
882. More cleanup to address PR comments (details)
883. remove unused variables (details)
884. Increase time for failing test (details)
885. ChangeLog for cam6_4_164 (details)
886. draft for removing rice - needs atmos_phys update (details)
887. Correct spelling of Tiedtke in zmconv_tiedtke_add (details)
888. update hemco_cesm to hemco-cesm2_3_0_hemco3_10_3 (details)
889. Remove rice from physpkg (details)
890. Add additional test to cam_refined test suite (details)
891. fix time-stepping for ARCTIC and POLARCAR (details)
892. Preliminary ChangeLog (details)
893. Preliminary ChangeLog (details)
894. add a comment for clubb-mf block (details)
895. change ztodt to ztodtptr for clarity (details)
896. Preliminary ChangeLog for cam6_4_165 (details)
897. update ChangeLog (details)
898. fix psfc bug, but retain comment for now (details)
899. remove comment for psfc bug fix (details)
900. add 1850 aux_cam test (details)
901. Added ChangeLog -- incomplete (details)
902. cam7 default namelist updates (details)
903. Update ccpp_constituent_prop_mod.F90 stub (details)
904. Final ChangeLog for cam6_4_166 (details)
905. corrections to hist t4s use case (details)
906. Update ccpp_scheme_utils stub; allow numliq/numice/cldliq/cldice and chem species lookup (details)
907. restore _CMXF history default (details)
908. GPU ERS restart fix (closes #1540) (details)
909. Peter's exner funct fixes (details)
910. Update atmos_phys to atmos_phys0_21_002 (details)
911. ChangeLog (details)
912. ChangeLog update (details)
913. Remove TEM namelist settings in use case -- now default (details)
914. minor clean up (details)
915. initial bug fixes (details)
916. Update SILHS testmods for CLUBB (details)
917. Finalize ChangeLog for cam6_4_168. (details)
918. Address review comments. (details)
919. Update src/physics/cam/eddy_diff_cam.F90 (details)
920. Update MPAS dynamical core to version 8.4.0 (details)
921. Update Makefile to fix build errors (details)
922. Remove unnecessary Makefile build target (details)
923. Add patches to fix crash in MPAS 8.4.0 (details)
924. Update namelist definitions, defaults, and input to accommodate MPAS 8.4.0 (details)
925. Add support for new deformation coefficients introduced in MPAS 8.4.0 (details)
926. Remove deprecated variables that no longer exist (details)
927. Define new constituent indexes required by MPAS 8.4.0 (details)
928. Remove debugging print (details)
929. Fix namelist comment based on atmos_phys code review. (details)
930. enforce floor for NH3 (details)
931. remove duplicate test (details)
932. ChangeLog draft (details)
933. ChangeLog update (details)
934. ChangeLog update (details)
935. Changes to get a single CAM_LINKED_LIBS to work (details)
936. test case for RTTOV (details)
937. Update the RTTOV library location (details)
938. ChangeLog update (details)
939. update photolysis lookup tables for cam7 compsets (details)
940. ChangeLog draft (details)
941. ChangeLog update (details)
942. ChangeLog update (details)
943. Add regression test, update COSP library and have Makefile point to access control directory (details)
944. update externals (details)
945. Respond to code review comments (details)
946. Remove rttov_libdir (details)
947. merge aqueous_chem branch (details)
948. Cleaner MAM mods (details)
949. minor changes (details)
950. fixes for bulk aerosols, pass in aero_props, use model_is routine for mam7 (details)
951. single sox_cldaero_mod module file (details)
952. more code clean up (details)
953. fix dangling pointer problem with nag compiler (details)
954. Add compilation of RTTOV (details)
955. fix energy bug in physics-dynamics coupling (details)
956. move longwave pbuf zeroing (details)
957. Update atmos_phys to atmos_phys0_21_003: ZM factor fix for energy conservation (fixes #1550) (details)
958. Draft ChangeLog. (details)
959. Bugfix (from @fvitt): rad_cnst refactor list_idx gating broke double radiation case (details)
960. ChangeLog update (details)
961. Draft ChangeLog. (details)
962. add comments; minor code clean (details)
963. Finalize ChangeLog for cam6_4_173. (details)
964. fix geos-chem build (details)
965. Fix typo in makefile (details)
966. Correct changes that were reverted in 9baeaa161909a12152f270505f641f3ba28b7d25 (details)
967. Change RTTOVDIR back to path using variable (details)
968. Fix dealloc in aero_model: use aerosol_instances_mod copy (details)
969. Use concrete MAM instance for geoschem instead of stub - for future expansion (details)
970. Fix aquaplanet case where bulk_aero is initialized but no aerosols (details)
971. Add missing _r8 (details)
972. Update atmos_phys to atmos_phys0_22_000 (details)
973. reviewer requests (details)
974. Add units to description of new namelist options (details)
975. Add ChangeLog draft (details)
976. replace acosd(coszrs(1:ncol)) with acos(coszrs(1:ncol)) * 180.0_8 / acos(-1.0_8), which uses only standard Fortran functions. This converts the result from radians to degrees by multiplying by the conversion factor 180/π, where π is computed as acos(-1.0_8). (details)
977. Change pcols to ncol for a section of code (details)
978. Correct warnings in code compile (details)
979. Add rad_diag CARMA testmod to existing Derecho FCARMA2000climo test (details)
980. Finalize ChangeLog (details)
981. Add missing _r8 (details)
982. Finalize ChangeLog for cam6_4_175. (details)
983. Add guards when assigning cospswathsIN (details)
984. Fix run error (details)
985. Add dimensions to fix out of range dimensions (details)
986. remove file which should have not been committed (details)
987. Root Cause: The cfg_rttov pointer in the cosp_optical_inputs type was never initialized (nullified) in the construct_cospIN subroutine. When destroy_cospIN attempted to use ASSOCIATED() on this uninitialized pointer, the NAG compiler raised an error because the pointer's status was undefined. (details)
988. Add ChangeLog for cam6_4_176 (details)
989. ChangeLog (details)
990. ChangeLog update (details)
991. Update atmos_phys to atmos_phys0_22_001 (details)
992. Finalize ChangeLog for cam6_4_178. (details)
993. fix big for mov mtn gw when zm is off (details)
994. Update atmos_phys to atmos_phys0_22_002: ZM fix, compute_cloud_fraction fix (details)
995. Update atmos_phys to atmos_phys0_22_003 (details)
996. Finalize ChangeLog for cam6_4_179. (details)
997. Finalize ChangeLog for cam6_4_179 (update nvhpc test; issue text). (details)
998. skip over water species only if analytic ICs are moist (details)
999. ChangeLog draft (details)
1000. ChangeLog update (details)
1001. Implement tuvx CAM configure option (details)
1002. Fix for building TUV-X in conda environment (details)
1003. Update ChangeLog for cam6_4_181 (details)
1004. Update cime_config/buildlib (details)
1005. Update cime_config/buildlib (details)
1006. Update bld/build-namelist (details)
1007. need to import re (details)
1008. Add carma_do_optics and rad_diag_3 to read generated optics files from CARMA. (details)
1009. Fix merge issue after CLUBB update. (details)
1010. ChangeLog (details)
1011. ChangeLog update (details)
1012. Address review comments from atmos_phys; typo fix (details)
1013. Fix whitespace (details)
1014. Update atmos_phys to atmos_phys0_23_000. (details)
1015. Finalize ChangeLog for cam6_4_183. (details)
1016. Update local Larson setup for cam6_4_183 (details)
1017. Port CAM CLUBB interface to current stats API (details)
1018. Make local setup tolerate existing externals (details)
1019. Document local setup helpers (details)
1020. Adding a comment to the dummy stats_init call (details)
1021. Updating scripts and custom ccs_config stuff - more of which is needed now due to recently updates (details)
1022. Disabling git in case.setup, we don't need it and it causes issues if you don't have git username/email configured (details)
1023. Fixing comments in run script (details)
1024. New cam needs more stack space (details)

Draft ChangeLog.

fexcl additional task-dependent cosp variable

always update netsw variable to be sent to coupler

Finalize ChangeLog.

rrtmgp lw works!

ChangeLog update for cam6_4_081

Add is_moist_dycore and fix snapshots for CAM7 dme_adjust

add initial attempt at type wrappers; code runs but answers are wrong

Fixes for ERS restart test failure for CAM-chem with HEMCO

Updates include:
- New HEMCO configuration input file which reads 3D emissions hourly
- New ERS and ERP tests for FCSD_HCO which use 10 steps instead of 9
- Updated HEMCO_CESM submodule version (v2.1). HEMCO version remains the
  same (3.9.0).

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update HEMCO_CESM submodule to tag hemco-cesm2_1_0_hemco3_9_0

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update default path for hemco_config_file

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Add draft Changelog message

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update default paths of hemco_diagn_file and hemco_data_root

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Remove new HEMCO Ln10 tests

HEMCO configuration file update allows reading emissions every timestep
which resolves the ERS test issue in the Ln9 tests.

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Address review comments.

finish object wrappers; answers now match again

remove duplicate code; add in fix from cam_development

Jesses last review suggestions were good ones

Update changelog

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

code clean-up and adding comments

move ccppized schemes to atmospheric_physics; fix indexing issues; clean-up cesm-log logging; add rrtmgp paths to configure

update atmos_phys hash

Update atmos_phys external tag

Update git commit for atmos_phys

update cloud chemistry

update interface to calculate current calendar day on "host" side

add doi references

	modified:   src/chemistry/mozart/mo_usrrxt.F90

remove unused variable

Update ChangeLog for cam6_4_083

revert the change in testlist_cam

ChangeLog draft

update CO2 access

update ChangeLog

Address review comments

subset arrays in call to ccpp layers

Changed to call raleigh_friction_run ccpp code directly from physpkg.F90

handle conditionally present pbuf fields

Add ncol subsetting for ps

Fix r8

Revert to using get_rlat_all_p because there is no r8 of get_lat_all_p

Add atmos_phys0_12_000 atmos_phys official tag.

Removing cam wrappers for rf ccpp init and run proceedures

Finalize ChangeLog.

Update ChangeLog with issue descriptions

update to handle timestamped rpointer files

corrections for st_archive tests

Replace magic numbers 287.15 with rair in physconst

update ccs_config submodule

update h2o2 production

Update atmos_phys submodule to new tag atmos_phys0_13_000

make consistant with model code

update HLC and reaction rate parameters and algorithms

Fixed namelist read bug by initializing nl variables

Implement the computation of relative vorticities at cell points

Pass relative vorticities to physics buffer during dynamics-physics coupling

update ccs_config submodule

update ccs_config submodule

Allow moving mountain gravity wave scheme to be selected with MPAS dycore

Add draft change log

ChangeLog update

remove terminator testmods

only write radiation_init info to masterproc

update ChangeLog

Finalize ChangeLog for cam6_4_088.

Always add FCHIST_GC test to pre-existing failures in ChangeLog

fix interface bug; remove unnecessary argument from cloud optics scheme

update atmospheric physics hash

Added code to make st-archive handle DART files

Draft of entry to satisfy development workflow recommendations

define compset PC7

add description for PC7

add PC7 test

Update externals to match alpha06f

Update externals

Add missing external

Update externals one more time

Update .gitmodules

Move the division by cell area out of loop

This could save some CPU cycles.

testlist updates

Update cime

Updates to ChangeLog for cam6_4_089

bypass some chem initialization for offline driver configurations

fix ChangeLog

fix indices for h2o2 params

Import early version of GC 14.5.0-rc.0

Fixes for species lists and counts

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Use new aerosol optics directory rather than fast-jx for optical properties

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update Cloud-J hash to version 8.0.1

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Restrict Cloud-J initialization prints to single thread

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update CHEM_INPUTS paths used in namelists

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update GEOS-Chem tag to official 14.5.0 release

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update to GEOS-Chem 14.5.1

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Fixes for GEOS-Chem 14.5.x in CESM

Remove HMS from dry/wetdep list as no matching data in species db.

Update dep_data_file to a new version containing GEOS-Chem 14.5 species

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update externals version tags for GEOS-Chem and HEMCO_CESM/HEMCO

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Replace numerical recipe with existing function in shr_spfn_erfc

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Initial changelog updates

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Update changelog

Signed-off-by: Lizzie Lundgren <elundgren@seas.harvard.edu>

Add testing for CAM7 low top with MPAS dynamical core

update testing; cam7 radiation diagnostics

update ChangeLog

Update change log with reviewers and test information

Change to test on mpasa480 grid

Also test on Izumi.

Work around missing input data for CTSM on mpasa480 grid

For testing purposes, it is fine to set `flanduse_timeseries` to ''. This causes
CTSM to keep surface properties fixed at those specified in `fsurdat`.

Update change log with revised test information

fix physics-dynamics coupling bugs for MPAS

update Changelog

Changelog

inadvertedly modified ChangeLog

MPAS dp_coupling bug fixes

change ERR test to ne16pg3; cleanup ncdata entries

trial commit for merge up to 90

cappa->cappav in MPAS dp_coupling layer

incl. pmiddry in fix

Update change log with final test information

Initial move of hb_diff code into atmos_phys.

Dechunkize, remove pcols from compute_vdiff; general cleanup of compute_vdiff for future CCPPization

Update src/dynamics/mpas/dp_coupling.F90

Co-authored-by: Jesse Nusbaumer <nusbaume@ucar.edu>

Update src/dynamics/mpas/dp_coupling.F90

Co-authored-by: Jesse Nusbaumer <nusbaume@ucar.edu>

mods for nag-7

ChangeLog update

make code compile

Clean up compute_vdiff unused arguments; use dependencies

update hash; add interstitial q variables

ChangeLog updates for cam6_4_092

namelist defaults and ChangeLog updates

ChangeLog update

update .gitmodules

Reword comment for readability

update .gitmodules

update radiation interface and bring in pio reader

update .gitmodules

Remove oop fieldlist in compute_vdiff and replace with logical array

update pio reader and rad interface

fix testlist; final ChangeLog

fixes for pio reader

update hash

Add comments

Fix wxie sms test diff due to wrong if and clause

modify outfrq9s_mpasa120

fix issue with NaNs in AurIPRateSum

	modified:   cime_config/testdefs/testmods_dirs/cam/outfrq1d_amie/user_nl_cam
	modified:   cime_config/testdefs/testmods_dirs/cam/outfrq9s_amie/user_nl_cam
	modified:   src/ionosphere/waccmx/ionosphere_interface.F90
	modified:   src/physics/waccm/mo_aurora.F90
	modified:   src/physics/waccmx/steady_state_tei.F90

Move diffusion solver for non-WACCM to atmos_phys

set default namelist ops and config nlevs for waccmx ne120

	modified:   bld/build-namelist
	modified:   bld/configure
	modified:   bld/namelist_files/namelist_defaults_cam.xml

Fix bit-for-bitness in toa interface temperature interpolation for waccm-x vertical diff.

default IC file and pelayout on derecho

	modified:   bld/namelist_files/namelist_defaults_cam.xml
	modified:   cime_config/config_pes.xml

add mpasa120 test

add min temperature namelist option

	modified:   bld/build-namelist
	modified:   bld/namelist_files/namelist_definition.xml
	modified:   src/dynamics/se/dycore/control_mod.F90
	modified:   src/dynamics/se/dycore/prim_advance_mod.F90
	modified:   src/dynamics/se/dyn_comp.F90

more default namelist settings

	modified:   bld/namelist_files/namelist_defaults_cam.xml

add conditional to calc_frontogenesis

modify MPAS frontogenesisAngle calc as done in SE

ChangeLog draft

ChangeLog update

Added line to archive .i. files as both restarts and history

Separate out vertical_diffusion_compute; tau_damp_rate

update MPAS testing; bugfix in config_component.xml

update to cime6.1.102

update cime submodule

update ChangeLog

add high-res waccmx test; update namelist defaults

	modified:   cime_config/testdefs/testlist_cam.xml
	modified:   cime_config/testdefs/testmods_dirs/cam/outfrq1h_wcmxhires/user_nl_clm

	new file:   cime_config/testdefs/testmods_dirs/cam/outfrq1h_wcmxhires/shell_commands
	new file:   cime_config/testdefs/testmods_dirs/cam/outfrq1h_wcmxhires/user_nl_cam
	new file:   cime_config/testdefs/testmods_dirs/cam/outfrq1h_wcmxhires/user_nl_clm

correct path of default IC file

        modified:   bld/namelist_files/namelist_defaults_cam.xml

An alternative for TEM diagnostics

        modified:   bld/namelist_files/namelist_definition.xml
        new file:   cime_config/testdefs/testmods_dirs/cam/outfrq9s_ctem/shell_commands
        new file:   cime_config/testdefs/testmods_dirs/cam/outfrq9s_ctem/user_nl_cam
        new file:   cime_config/testdefs/testmods_dirs/cam/outfrq9s_ctem/user_nl_clm
        modified:   src/control/runtime_opts.F90
        modified:   src/physics/cam/physpkg.F90
        modified:   src/physics/cam7/physpkg.F90
        new file:   src/utils/ctem_diags_mod.F90
        new file:   src/utils/esmf_check_error_mod.F90
        new file:   src/utils/esmf_lonlat_grid_mod.F90
        new file:   src/utils/esmf_phys2lonlat_mod.F90
        new file:   src/utils/esmf_phys_mesh_mod.F90
        new file:   src/utils/esmf_zonal_mean_mod.F90