CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2873 : clubb_params, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2874 : clubb_config_flags%iiPDF_type, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2875 : l_use_precip_frac, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2876 : clubb_config_flags%l_predict_upwp_vpwp, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2877 : clubb_config_flags%l_diagnose_correlations, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2878 : clubb_config_flags%l_calc_w_corr, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2879 : clubb_config_flags%l_const_Nc_in_cloud, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2880 : clubb_config_flags%l_fix_w_chi_eta_correlations, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2881 : stats_metadata, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2882 : stats_zt, stats_zm, stats_sfc, err_code, & ! In/Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2883 : hydrometp2, & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2884 : mu_x_1_n, mu_x_2_n, & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2885 : sigma_x_1_n, sigma_x_2_n, & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2886 : corr_array_1_n, corr_array_2_n, & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2887 : corr_cholesky_mtx_1, corr_cholesky_mtx_2, & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2888 : precip_fracs, & ! In/Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2889 : hydromet_pdf_params ) ! Optional(out)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2909 : stats_zt(i), stats_zm(i), & ! In/Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2913 : !$acc update device( mu_x_1_n, mu_x_2_n, sigma_x_1_n, sigma_x_2_n, corr_array_1_n, corr_array_2_n, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3000 : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3032 : !$acc X_nl_all_levs, X_mixt_comp_all_levs, lh_sample_point_weights, mu_x_1_n, mu_x_2_n, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3034 : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3038 : !$acc pdf_params%cloud_frac_1, pdf_params%cloud_frac_2, pdf_params%cthl_1, pdf_params%cthl_2, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3039 : !$acc pdf_params%crt_1, pdf_params%crt_2, pdf_params%stdev_chi_1, pdf_params%stdev_chi_2, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3062 : thlm(i,:), p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), rtm(i,:), &! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3063 : rcm(i,:), cloud_frac(i,:), wm_zt(i,:), wm_zm(i,:), wp2_zt(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3064 : hydromet(i,:,:), Nc_in_cloud(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3080 : stats_zt(i), stats_zm(i), & ! Inout
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3081 : stats_sfc(i), stats_lh_zt(i), & ! Inout
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3082 : Nccnm(i,:), & ! Inout
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3083 : hydromet_mc(i,:,:), Ncm_mc(i,:), rcm_mc(i,:), rvm_mc(i,:), & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3084 : thlm_mc(i,:), hydromet_vel_zt(i,:,:), & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3085 : hydromet_vel_covar_zt_impc(i,:,:), & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3086 : hydromet_vel_covar_zt_expc(i,:,:), & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3087 : wprtp_mc(i,:), wpthlp_mc(i,:), rtp2_mc(i,:), & ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3088 : thlp2_mc(i,:), rtpthlp_mc(i,:) ) ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3112 : stats_zt(i), stats_zm(i), stats_sfc(i), & ! Inout
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3113 : hydromet(i,:,:), hydromet_vel_zt(i,:,:), hydrometp2(i,:,:), & ! Inout
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3114 : K_hm(i,:,:), Ncm(i,:), Nc_in_cloud(i,:), rvm_mc(i,:), & ! Inout
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3115 : thlm_mc(i,:), err_code, & ! Inout
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3116 : wphydrometp(i,:,:), wpNcp(i,:) ) ! Out
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3119 : !$acc update device( rcm_mc, rvm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3181 : call stat_update_var( stats_metadata%irtm_mc, rvm_mc(i,:)+rcm_mc(i,:), stats_zt(i) ) ! kg/kg/s
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3183 : call stat_update_var( stats_metadata%iwprtp_mc, wprtp_mc(i,:), stats_zm(i) ) ! m*(kg/kg)/s^2
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3185 : call stat_update_var( stats_metadata%irtp2_mc, rtp2_mc(i,:), stats_zm(i) ) ! (kg/kg)^2/s
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3187 : call stat_update_var( stats_metadata%irtpthlp_mc, rtpthlp_mc(i,:), stats_zm(i) ) ! K*(kg/kg)/s
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3204 : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, X_nl_all_levs, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3224 : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, thlm, rtm, rcm )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3253 : call update_radiation_variables( gr%nzm, gr%nzt, radht(i,:), Frad_SW_up(i,:), Frad_LW_up(i,:), &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3282 : if ( ( stats_metadata%l_stats_last .or. stats_metadata%l_stats .or. l_output_multi_col ) .and. l_stdout ) then
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5879 : !$acc enter data create( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6032 : !$acc update device( wm_zt, wm_zm, thlm_forcing, rtm_forcing, um_ref, vm_ref, sclrm_forcing, edsclrm_forcing )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6434 : call stat_update_var_pt( stats_metadata%ish, 1, wpthlp_sfc(i)*rho_zm(i,1)*Cp,& ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6437 : call stat_update_var_pt( stats_metadata%ilh, 1, wprtp_sfc(i)*rho_zm(i,1)*Lv, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6440 : call stat_update_var_pt( stats_metadata%iwpthlp_sfc, 1, wpthlp_sfc(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6443 : call stat_update_var_pt( stats_metadata%iwprtp_sfc, 1, wprtp_sfc(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6446 : call stat_update_var_pt( stats_metadata%iupwp_sfc, 1, upwp_sfc(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6449 : call stat_update_var_pt( stats_metadata%ivpwp_sfc, 1, vpwp_sfc(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6452 : call stat_update_var_pt( stats_metadata%iustar, 1, ustar(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6455 : call stat_update_var_pt( stats_metadata%iT_sfc, 1, T_sfc(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6461 : !$acc exit data delete( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6663 : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6667 : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6671 : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6672 : exner_zm(i,km1), exner_zm(i,k00), exner_zm(i,kp1), exner_zm(i,kp2) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6675 : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6676 : thlm_zm(i,km1), thlm_zm(i,k00), thlm_zm(i,kp1), thlm_zm(i,kp2) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6679 : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
6680 : rtm_zm(i,km1), rtm_zm(i,k00), rtm_zm(i,kp1), rtm_zm(i,kp2) )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/clubb_driver.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/CLUBB_core/*.F90
CLUBBStandardsCheck.pl has begun.
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Missing 'implicit none' statements. 'Implicit None' check FAILED!
CLUBBStandardsCheck.pl Add a line containing 'implicit none' to each program, module, subroutine, and function.
../src/CLUBB_core/mt95.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
995 : call windm_edsclrm_rhs( nzm, nzt, ngrdcol, gr, windm_edsclrm_scalar, dt, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
996 : lhs_diff, edsclrm(:,:,edsclr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
997 : edsclrm_forcing(:,:,edsclr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
998 : rho_ds_zm, invrs_rho_ds_zt, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
999 : l_imp_sfc_momentum_flux, wpedsclrp(:,gr%k_lb_zm,edsclr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1000 : stats_metadata, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1001 : stats_zt, & ! intent(inout)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1002 : rhs(:,:,edsclr) ) ! intent(out)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/advance_windm_edsclrm_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1308 : status = nf90_def_var( ncid_zm, "columns", NF90_INT, (/column_id_zm/), column_var_id_zm )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1309 : status = nf90_def_var( ncid_zm, "altitude", NF90_PREC, (/vertical_id_zm/), vertical_var_id_zm )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1310 : status = nf90_def_var( ncid_zm, "time", NF90_PREC, (/time_id_zm/), time_var_id_zm )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1362 : status = nf90_def_var( ncid_zt, "columns", NF90_INT, (/column_id_zt/), column_var_id_zt )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1363 : status = nf90_def_var( ncid_zt, "altitude", NF90_PREC, (/vertical_id_zt/), vertical_var_id_zt )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1364 : status = nf90_def_var( ncid_zt, "time", NF90_PREC, (/time_id_zt/), time_var_id_zt )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1410 : status = nf90_put_var( ncid_zm, column_var_id_zm, column_list, start=(/1/), count=(/ngrdcol/) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1411 : status = nf90_put_var( ncid_zt, column_var_id_zt, column_list, start=(/1/), count=(/ngrdcol/) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1413 : !=================================== Allocate Output Arrays ===================================
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1540 : !$acc upwp_out, vpwp_out, up2_out, vp2_out, wp3_out, rcm_out, cloud_frac_out, rtm_out, thlm_out )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/output_netcdf.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
772 : call sfc_varnce_check( sclr_dim, wp2(i,gr%k_lb_zm), up2(i,gr%k_lb_zm), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
773 : vp2(i,gr%k_lb_zm), thlp2(i,gr%k_lb_zm), rtp2(i,gr%k_lb_zm), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
774 : rtpthlp(i,gr%k_lb_zm), sclrp2(i,gr%k_lb_zm,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
775 : sclrprtp(i,gr%k_lb_zm,:), sclrpthlp(i,gr%k_lb_zm,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
776 : err_code ) ! intent(inout)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/sfc_varnce_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
685 : !$acc parallel loop gang vector collapse(2) default(present) reduction(.or.:l_any_adjustment_needed)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
836 : ! MONOFLUX TEST COMMENT DO NOT REMOVE if( any(wpxp_net_adjust /= 0.0) ) write(fstderr,*) "MONOFLUX: wpxp adjusted "
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/mono_flux_limiter.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2471 : call setup_grid( nzmax, 1, sfc_elevation_col, l_implemented, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2472 : l_ascending_grid, grid_type, deltaz_col, zm_init_col, zm_top_col, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2473 : momentum_heights_col, thermodynamic_heights_col, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2474 : gr, err_code_api ) ! intent(inout)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3370 : if ( err_code_api == clubb_fatal_error ) error stop "Error in CLUBB calling setup_pdf_parameters"
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3573 : if ( err_code_api == clubb_fatal_error ) error stop "Error in CLUBB calling setup_pdf_parameters"
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/clubb_api_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2026 : ! calculate p_in_Pa instead of remapping directly since it can run into problems if for example
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/grid_adaptation.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
775 : call wpxp_term_pr1_lhs( nzm, ngrdcol, gr, C6rt_Skw_fnc, C6thl_Skw_fnc, C7_Skw_fnc, & ! Intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
776 : invrs_tau_C6_zm, l_scalar_calc, & ! Intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
777 : lhs_pr1_wprtp, lhs_pr1_wpthlp, lhs_pr1_wpsclrp ) ! Intent(out)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
855 : stats_zt, stats_zm, stats_sfc, & ! InOut
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
856 : rtm, wprtp, thlm, wpthlp, sclrm, wpsclrp, & ! InOut
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
857 : err_code ) ! InOut
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/advance_xm_wpxp_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1311 : sclrprtp(:,:,sclr) ) ! Intent(inout)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1346 : sclrpthlp(:,:,sclr) ) ! Intent(inout)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/advance_xp2_xpyp_module.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/Benchmark_cases/*.F90
CLUBBStandardsCheck.pl has begun.
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
127 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
128 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/bomex.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
91 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
92 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/dycoms2_rf01.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
121 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
122 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/dycoms2_rf02.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
152 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
153 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/gabls2.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
96 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
97 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
176 : wpthlp_sfc(i) = convert_sens_ht_to_km_s( ( 270._core_rknd * ft**1.5_core_rknd ), rho_sfc(i) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
177 : wprtp_sfc(i) = convert_latent_ht_to_m_s( ( 554._core_rknd * ft**1.3_core_rknd ), rho_sfc(i) )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/lba.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
157 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
158 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/mpace_b.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
272 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
273 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/mpace_a.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
104 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
105 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/wangara.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
159 : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
160 : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/rico.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/KK_microphys/*.F90
CLUBBStandardsCheck.pl has begun.
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/SILHS/*.F90
CLUBBStandardsCheck.pl has begun.
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/G_unit_test_types/*.F90
CLUBBStandardsCheck.pl has begun.
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Number of "private" statements does not not match number of modules.
CLUBBStandardsCheck.pl WARNING: Private Test failed!
../src/G_unit_test_types/rev_direction_grid_test.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
192 : !seed used = -1102123834 1480475276 -248259584 525496705 1614213535 -1267052688 6290033 -78466652
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
193 : !seed_output = (/ -1102123834, 1480475276, -248259584, 525496705, 1614213535, -1267052688, 6290033, -78466652 /)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
705 : call xpyp_term_ta_pdf_lhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
709 : call xpyp_term_ta_pdf_lhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
750 : call xpyp_term_ta_pdf_rhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
756 : call xpyp_term_ta_pdf_rhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/G_unit_test_types/rev_direction_grid_test.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Run)
[Pipeline] sh
+ source /etc/profile.d/larson-group.sh
++ export GIT_EDITOR=vi
++ GIT_EDITOR=vi
++ export SVN_EDITOR=vi
++ SVN_EDITOR=vi
++ export OMP_STACKSIZE=1048579
++ OMP_STACKSIZE=1048579
++ export LMOD_ROOT=/opt/lmod/
++ LMOD_ROOT=/opt/lmod/
++ source /opt/lmod//lmod/lmod/init/bash
+++ '[' -z '' ']'
+++ case "$-" in
+++ __lmod_vx=x
+++ '[' -n x ']'
+++ set +x
Shell debugging temporarily silenced: export LMOD_SH_DBG_ON=1 for this output (/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-12.2.0/lmod-8.7.37-bi3kyxcdrfgw3y7vv2k7c5rjxg75qzju/lmod/lmod/init/bash)
Shell debugging restarted
+++ unset __lmod_vx
+++ find /usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core -print -quit
++ export MODULEPATH=/usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core
++ MODULEPATH=/usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core
+ module load gcc netcdf-fortran
+ '[' -z '' ']'
+ case "$-" in
+ __lmod_sh_dbg=x
+ '[' -n x ']'
+ set +x
Shell debugging temporarily silenced: export LMOD_SH_DBG_ON=1 for Lmod's output
Lmod Warning:
-------------------------------------------------------------------------------
The following dependent module(s) are not currently loaded:
gcc-runtime/13.1.0-gzedt3f (required by: mpich/4.2.1, hdf5/1.14.3-42x3zrv,
netcdf-c/4.9.2, netcdf-fortran/4.5.3)
-------------------------------------------------------------------------------
Shell debugging restarted
+ unset __lmod_sh_dbg
+ return 0
+ python3 run_scripts/run_clubb_w_varying_flags.py -f run_scripts/run_bindiff_w_flags_config_core_flags.json
Reading settings from run_scripts/run_bindiff_w_flags_config_core_flags.json...
Creating all input flag files in /home/jenkins/workspace/branch_clubb_test/input/tunable_parameters ...
Running CLUBB for 18 total flag files
Running cases for flag1_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag2_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag3_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag4_tmp.in ...
Performing standard run
Running arm
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528549 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running arm_97
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528596 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running astex_a209
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528641 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running atex
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528686 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running bomex
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528731 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s6
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528776 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s11
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528823 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running cgils_s12
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528856 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running clex9_nov02
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528889 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running clex9_oct14
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528935 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3528980 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01_fixed_sst
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529027 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_do
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529072 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_ds
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529117 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_nd
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529164 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_so
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529209 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running fire
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529254 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls2
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529299 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529355 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3_night
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529402 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running jun25_altocu
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529447 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running lba
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529492 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running mc3e
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529537 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_a
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529584 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529629 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b_silhs
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529674 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running nov11_altocu
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529719 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running rico
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529766 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running rico_silhs
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529811 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running twp_ice
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529857 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running wangara
#5 0x623d59 in __generalized_grid_test_MOD_clubb_generalized_grid_testing
at ../src/generalized_grid_test.F90:850
#6 0x485004 in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:2790
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3529902 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
arm failure
arm_97 failure
astex_a209 failure
atex failure
bomex failure
cgils_s6 failure
cgils_s11 failure
cgils_s12 failure
clex9_nov02 failure
clex9_oct14 failure
dycoms2_rf01 failure
dycoms2_rf01_fixed_sst failure
dycoms2_rf02_do failure
dycoms2_rf02_ds failure
dycoms2_rf02_nd failure
dycoms2_rf02_so failure
fire failure
gabls2 failure
gabls3 failure
gabls3_night failure
jun25_altocu failure
lba failure
mc3e failure
mpace_a failure
mpace_b failure
mpace_b_silhs failure
nov11_altocu failure
rico failure
rico_silhs failure
twp_ice failure
wangara failure
Running cases for flag5_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag6_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
at ../src/clubb_standalone.F90:11
Invalid configuration: l_min_xp2_from_corr_wx = T and l_enable_relaxed_clipping = T
They must have opposite values
Fatal error in check_clubb_settings_api
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
WARNING! The option l_add_dycore_grid=.true. can currently only be used for cases with forcings from an input file and for the atex case, so for this case l_add_dycore_grid must be set to .false..
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
gabls2 failure
Running cases for flag7_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag8_tmp.in ...
Performing standard run
Running arm
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running arm_97
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running astex_a209
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running atex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running bomex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s6
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s11
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running cgils_s12
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running clex9_nov02
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running clex9_oct14
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01_fixed_sst
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_do
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_ds
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_nd
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_so
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running fire
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls2
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3_night
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running jun25_altocu
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running lba
C6rtb = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
mv: cannot stat '../output/*.nc': No such file or directory
Running mc3e
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_a
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running nov11_altocu
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running twp_ice
Nim < 0.0000000000000000 in fill_holes_driver_api at k= 29
Nim < 0.0000000000000000 in fill_holes_driver_api at k= 31
Nim < 0.0000000000000000 in fill_holes_driver_api at k= 33
Nim < 0.0000000000000000 in fill_holes_driver_api at k= 35
Nim < 0.0000000000000000 in fill_holes_driver_api at k= 37
rsm < 0.0000000000000000 in fill_holes_driver_api at k= 28
Nsm < 0.0000000000000000 in fill_holes_driver_api at k= 28
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running wangara
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
arm failure
arm_97 failure
astex_a209 failure
atex failure
bomex failure
cgils_s6 failure
cgils_s11 failure
cgils_s12 failure
clex9_nov02 failure
clex9_oct14 failure
dycoms2_rf01 failure
dycoms2_rf01_fixed_sst failure
dycoms2_rf02_do failure
dycoms2_rf02_ds failure
dycoms2_rf02_nd failure
dycoms2_rf02_so failure
fire failure
gabls2 failure
gabls3 failure
gabls3_night failure
jun25_altocu failure
lba failure
mc3e failure
mpace_a failure
mpace_b failure
mpace_b_silhs failure
nov11_altocu failure
rico failure
rico_silhs failure
twp_ice failure
wangara failure
Running cases for flag9_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag10_tmp.in ...
Performing standard run
Running arm
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running arm_97
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running astex_a209
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running atex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running bomex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s6
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s11
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running cgils_s12
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running clex9_nov02
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running clex9_oct14
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01_fixed_sst
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_do
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_ds
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_nd
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_so
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running fire
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls2
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3_night
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running jun25_altocu
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running lba
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mc3e
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_a
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b_silhs
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running nov11_altocu
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running twp_ice
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running wangara
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
arm failure
arm_97 failure
astex_a209 failure
atex failure
bomex failure
cgils_s6 failure
cgils_s11 failure
cgils_s12 failure
clex9_nov02 failure
clex9_oct14 failure
dycoms2_rf01 failure
dycoms2_rf01_fixed_sst failure
dycoms2_rf02_do failure
dycoms2_rf02_ds failure
dycoms2_rf02_nd failure
dycoms2_rf02_so failure
fire failure
gabls2 failure
gabls3 failure
gabls3_night failure
jun25_altocu failure
lba failure
mc3e failure
mpace_a failure
mpace_b failure
mpace_b_silhs failure
nov11_altocu failure
rico failure
rico_silhs failure
twp_ice failure
wangara failure
Running cases for flag11_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Mismatch in generalized grid test; Stopping run
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
gabls2 failure
Running cases for flag12_tmp.in ...
Performing standard run
Running arm
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running arm_97
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running astex_a209
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running atex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running bomex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s6
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s11
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running cgils_s12
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running clex9_nov02
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running clex9_oct14
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01_fixed_sst
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_do
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_ds
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_nd
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_so
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running fire
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls2
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3_night
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running jun25_altocu
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running lba
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mc3e
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_a
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b_silhs
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running nov11_altocu
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: spurious supersaturation was removed after pdf_closure!
Warning: spurious supersaturation was removed after pdf_closure!
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running twp_ice
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running wangara
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
arm failure
arm_97 failure
astex_a209 failure
atex failure
bomex failure
cgils_s6 failure
cgils_s11 failure
cgils_s12 failure
clex9_nov02 failure
clex9_oct14 failure
dycoms2_rf01 failure
dycoms2_rf01_fixed_sst failure
dycoms2_rf02_do failure
dycoms2_rf02_ds failure
dycoms2_rf02_nd failure
dycoms2_rf02_so failure
fire failure
gabls2 failure
gabls3 failure
gabls3_night failure
jun25_altocu failure
lba failure
mc3e failure
mpace_a failure
mpace_b failure
mpace_b_silhs failure
nov11_altocu failure
rico failure
rico_silhs failure
twp_ice failure
wangara failure
Running cases for flag13_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag14_tmp.in ...
Performing standard run
Running arm
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running arm_97
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running astex_a209
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running atex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running bomex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s6
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s11
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running cgils_s12
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running clex9_nov02
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running clex9_oct14
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01_fixed_sst
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_do
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_ds
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_nd
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_so
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running fire
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls2
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3_night
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running jun25_altocu
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running lba
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mc3e
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_a
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running nov11_altocu
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running twp_ice
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running wangara
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
arm failure
arm_97 failure
astex_a209 failure
atex failure
bomex failure
cgils_s6 failure
cgils_s11 failure
cgils_s12 failure
clex9_nov02 failure
clex9_oct14 failure
dycoms2_rf01 failure
dycoms2_rf01_fixed_sst failure
dycoms2_rf02_do failure
dycoms2_rf02_ds failure
dycoms2_rf02_nd failure
dycoms2_rf02_so failure
fire failure
gabls2 failure
gabls3 failure
gabls3_night failure
jun25_altocu failure
lba failure
mc3e failure
mpace_a failure
mpace_b failure
mpace_b_silhs failure
nov11_altocu failure
rico failure
rico_silhs failure
twp_ice failure
wangara failure
Running cases for flag15_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
#5 0x4b0169 in __microphys_driver_MOD_calc_microphys_scheme_tendcies
at ../src/microphys_driver.F90:516
#6 0x492b4b in __clubb_driver_MOD_run_clubb
at ../src/clubb_driver.F90:3088
#7 0x403d37 in clubb_standalone
at ../src/clubb_standalone.F90:99
#8 0x403e07 in main
at ../src/clubb_standalone.F90:11
./run_scm.bash: line 44: 3553791 Floating point exception(core dumped) $CLUBB_EXECUTABLE_FILE
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
mc3e failure
Running cases for flag16_tmp.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
Running cases for flag17_tmp.in ...
Performing standard run
Running arm
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running arm_97
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running astex_a209
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running atex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running bomex
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s6
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running cgils_s11
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running cgils_s12
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
mv: cannot stat '../output/*_setup.txt': No such file or directory
Running clex9_nov02
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running clex9_oct14
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf01_fixed_sst
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_do
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_ds
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_nd
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running dycoms2_rf02_so
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running fire
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls2
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Warning: running with vertical grid which is larger than 250 levels.
This may take a lot of CPU time and memory.
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running gabls3_night
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running jun25_altocu
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running lba
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mc3e
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_a
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running mpace_b_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running nov11_altocu
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running rico_silhs
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running twp_ice
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
Running wangara
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thl must have a value of 1.
C6thl = 2.0000000000000000
Warning in check_clubb_settings_api
When the l_diag_Lscale_from_tau flag is enabled, C6thlb must have a value of 1.
C6thlb = 2.0000000000000000
Warning in check_clubb_settings_api
Mismatch in generalized grid test; Stopping run
WARNING! Main loop timing budget has errors in excess of 1 per cent!
mv: cannot stat '../output/*.nc': No such file or directory
arm failure
arm_97 failure
astex_a209 failure
atex failure
bomex failure
cgils_s6 failure
cgils_s11 failure
cgils_s12 failure
clex9_nov02 failure
clex9_oct14 failure
dycoms2_rf01 failure
dycoms2_rf01_fixed_sst failure
dycoms2_rf02_do failure
dycoms2_rf02_ds failure
dycoms2_rf02_nd failure
dycoms2_rf02_so failure
fire failure
gabls2 failure
gabls3 failure
gabls3_night failure
jun25_altocu failure
lba failure
mc3e failure
mpace_a failure
mpace_b failure
mpace_b_silhs failure
nov11_altocu failure
rico failure
rico_silhs failure
twp_ice failure
wangara failure
Running cases for configurable_model_flags.in ...
Performing standard run
Running arm
Running arm_97
Running astex_a209
Running atex
Running bomex
Running cgils_s6
Running cgils_s11
Running cgils_s12
Running clex9_nov02
Running clex9_oct14
Running dycoms2_rf01
Running dycoms2_rf01_fixed_sst
Running dycoms2_rf02_do
Running dycoms2_rf02_ds
Running dycoms2_rf02_nd
Running dycoms2_rf02_so
Running fire
Running gabls2
Running gabls3
Running gabls3_night
Running jun25_altocu
Running lba
Running mc3e
Running mpace_a
Running mpace_b
Running mpace_b_silhs
Running nov11_altocu
Running rico
Running rico_silhs
Running twp_ice
Running wangara
All cases ran to completion.
There was a failure in the CLUBB run
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Declarative: Post Actions)
[Pipeline] script
[Pipeline] {
[Pipeline] }
[Pipeline] // script
[Pipeline] script
[Pipeline] {
[Pipeline] }
[Pipeline] // script
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
[Pipeline] // node
[Pipeline] End of Pipeline
ERROR: script returned exit code 1
Finished: FAILURE
![[Jenkins]](/jenkins/static/57c8a776/images/svgs/logo.svg){kind=logo}
