Console Output
+ source /etc/profile.d/larson-group.sh
++ export GIT_EDITOR=vi
++ GIT_EDITOR=vi
++ export SVN_EDITOR=vi
++ SVN_EDITOR=vi
++ export OMP_STACKSIZE=1048579
++ OMP_STACKSIZE=1048579
++ export LMOD_ROOT=/opt/lmod/
++ LMOD_ROOT=/opt/lmod/
++ source /opt/lmod//lmod/lmod/init/bash
+++ '[' -z '' ']'
+++ case "$-" in
+++ __lmod_vx=x
+++ '[' -n x ']'
+++ set +x
Shell debugging temporarily silenced: export LMOD_SH_DBG_ON=1 for this output (/usr/local/spack/opt/spack/linux-pop22-cascadelake/gcc-12.2.0/lmod-8.7.37-bi3kyxcdrfgw3y7vv2k7c5rjxg75qzju/lmod/lmod/init/bash)
Shell debugging restarted
+++ unset __lmod_vx
+++ find /usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core -print -quit
++ export MODULEPATH=/usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core
++ MODULEPATH=/usr/local/spack/share/spack/lmod/linux-pop22-x86_64/Core
+ module load intel netcdf-fortran
+ '[' -z '' ']'
+ case "$-" in
+ __lmod_sh_dbg=x
+ '[' -n x ']'
+ set +x
Shell debugging temporarily silenced: export LMOD_SH_DBG_ON=1 for Lmod's output
Shell debugging restarted
+ unset __lmod_sh_dbg
+ return 0
+ ./compile.py -run_tests
-- Compiling with double precision
-- netcdf-fortran found via pkg-config
-- Include dirs: /usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/include;/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-c-4.9.2-bonxxepz3qgjfduxm5xyggprdieneook/include
-- Libraries: netcdff
-- Derived NetCDFFortran_ROOT = /usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf
-- Configuring done
-- Generating done
-- Build files have been written to: /home/jenkins/workspace/clubb_cmake_test/build/ifx_PRECdouble
Setting CLUBB installation dir: /home/jenkins/workspace/clubb_cmake_test/build/ifx_PRECdouble
Setting CLUBB installation dir: /home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble
Using inferred toolchain file: /home/jenkins/workspace/clubb_cmake_test/cmake/toolchains/linux_x86_64_ifx.cmake
about to cmnake /home/jenkins/workspace/clubb_cmake_test/build/ifx_PRECdouble
Running CMake configure...
[1/16] Building Fortran preprocessed src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/error_code.F90-pp.f90
[2/16] Building Fortran preprocessed src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/fill_holes.F90-pp.f90
[3/16] Building Fortran preprocessed src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/clip_explicit.F90-pp.f90
[4/16] Building Fortran preprocessed src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_wp2_wp3_module.F90-pp.f90
[5/16] Generating Fortran dyndep file src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/Fortran.dd
[6/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/error_code.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/error_code.F90(82): warning #8889: Explicit interface or EXTERNAL declaration is required. [GETPID]
write(err_header,'(A7,I7,A20)') "Process ", getpid(), " -- CLUBB -- ERROR: "
----------------------------------------------------^
[7/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_type_utilities.F90.o
[8/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/interpolation.F90.o
[9/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/err_info_type_module.F90.o
[10/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_lh_sfc_module.F90.o
[11/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_rad_zm_module.F90.o
[12/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_rad_zt_module.F90.o
[13/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/matrix_operations.F90.o
[14/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_sfc_module.F90.o
[15/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_lh_zt_module.F90.o
[16/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/diagnose_correlations_module.F90.o
[17/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/input_reader.F90.o
[18/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/corr_varnce_module.F90.o
[19/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/index_mapping.F90.o
[20/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/lapack_wrap.F90.o
[21/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/matrix_solver_wrapper.F90.o
[22/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_zm_module.F90.o
[23/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/grid_class.F90.o
[24/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/calc_pressure.F90.o
[25/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/sponge_layer_damping.F90.o
[26/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_xp3_module.F90.o
[27/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/saturation.F90.o
[28/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/pos_definite_module.F90.o
[29/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/mean_adv.F90.o
[30/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/diffusion.F90.o
[31/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/precipitation_fraction.F90.o
[32/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_helper_module.F90.o
[33/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/turbulent_adv_pdf.F90.o
[34/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/pdf_utilities.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/pdf_utilities.F90(1400): remark #7712: This variable has not been used. [M]
m
------^
[35/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/fill_holes.F90.o
[36/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/clip_explicit.F90.o
[37/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/remapping_module.F90.o
[38/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/mono_flux_limiter.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/mono_flux_limiter.F90(463): remark #7712: This variable has not been used. [TMP]
tmp, &
------^
[39/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_zt_module.F90.o
[40/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/grid_adaptation_module.F90.o
[41/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/setup_clubb_pdf_params.F90.o
[42/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/parameters_tunable.F90.o
[43/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/numerical_check.F90.o
[44/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_windm_edsclrm_module.F90.o
[45/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/output_netcdf.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1786): warning #8889: Explicit interface or EXTERNAL declaration is required. [NF_ENDDEF]
call nf_enddef(ncid_zm)
-----------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1835): warning #8889: Explicit interface or EXTERNAL declaration is required. [NF_ENDDEF]
call nf_enddef(ncid_zt)
-----------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1484): remark #7712: This variable has not been used. [UM]
um, vm, up3, vp3, rtm, thlm, rtp3, thlp3, wp3, upwp, vpwp, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1484): remark #7712: This variable has not been used. [VM]
um, vm, up3, vp3, rtm, thlm, rtp3, thlp3, wp3, upwp, vpwp, &
------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1484): remark #7712: This variable has not been used. [UP3]
um, vm, up3, vp3, rtm, thlm, rtp3, thlp3, wp3, upwp, vpwp, &
----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1484): remark #7712: This variable has not been used. [VP3]
um, vm, up3, vp3, rtm, thlm, rtp3, thlp3, wp3, upwp, vpwp, &
---------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1484): remark #7712: This variable has not been used. [RTP3]
um, vm, up3, vp3, rtm, thlm, rtp3, thlp3, wp3, upwp, vpwp, &
-------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1484): remark #7712: This variable has not been used. [THLP3]
um, vm, up3, vp3, rtm, thlm, rtp3, thlp3, wp3, upwp, vpwp, &
-------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1486): remark #7712: This variable has not been used. [SCLRM]
sclrm, sclrp3, wpsclrp, sclrp2, sclrprtp, sclrpthlp, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1486): remark #7712: This variable has not been used. [SCLRP3]
sclrm, sclrp3, wpsclrp, sclrp2, sclrprtp, sclrpthlp, &
---------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1486): remark #7712: This variable has not been used. [WPSCLRP]
sclrm, sclrp3, wpsclrp, sclrp2, sclrprtp, sclrpthlp, &
-----------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1486): remark #7712: This variable has not been used. [SCLRP2]
sclrm, sclrp3, wpsclrp, sclrp2, sclrprtp, sclrpthlp, &
--------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1486): remark #7712: This variable has not been used. [SCLRPRTP]
sclrm, sclrp3, wpsclrp, sclrp2, sclrprtp, sclrpthlp, &
----------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1486): remark #7712: This variable has not been used. [SCLRPTHLP]
sclrm, sclrp3, wpsclrp, sclrp2, sclrprtp, sclrpthlp, &
--------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1487): remark #7712: This variable has not been used. [P_IN_PA]
p_in_Pa, exner, rcm, cloud_frac, wp2thvp, wpthvp, rtpthvp, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1487): remark #7712: This variable has not been used. [EXNER]
p_in_Pa, exner, rcm, cloud_frac, wp2thvp, wpthvp, rtpthvp, &
-----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1487): remark #7712: This variable has not been used. [WP2THVP]
p_in_Pa, exner, rcm, cloud_frac, wp2thvp, wpthvp, rtpthvp, &
-----------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1487): remark #7712: This variable has not been used. [WPTHVP]
p_in_Pa, exner, rcm, cloud_frac, wp2thvp, wpthvp, rtpthvp, &
--------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1487): remark #7712: This variable has not been used. [RTPTHVP]
p_in_Pa, exner, rcm, cloud_frac, wp2thvp, wpthvp, rtpthvp, &
----------------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1488): remark #7712: This variable has not been used. [THLPTHVP]
thlpthvp, sclrpthvp, wp2rtp, wp2thlp, wpup2, wpvp2, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1488): remark #7712: This variable has not been used. [SCLRPTHVP]
thlpthvp, sclrpthvp, wp2rtp, wp2thlp, wpup2, wpvp2, &
------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1488): remark #7712: This variable has not been used. [WP2RTP]
thlpthvp, sclrpthvp, wp2rtp, wp2thlp, wpup2, wpvp2, &
-----------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1488): remark #7712: This variable has not been used. [WP2THLP]
thlpthvp, sclrpthvp, wp2rtp, wp2thlp, wpup2, wpvp2, &
-------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1488): remark #7712: This variable has not been used. [WPUP2]
thlpthvp, sclrpthvp, wp2rtp, wp2thlp, wpup2, wpvp2, &
----------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1488): remark #7712: This variable has not been used. [WPVP2]
thlpthvp, sclrpthvp, wp2rtp, wp2thlp, wpup2, wpvp2, &
-----------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1489): remark #7712: This variable has not been used. [ICE_SUPERSAT_FRAC]
ice_supersat_frac, uprcp, vprcp, rc_coef_zm, wp4, wp2up2, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1489): remark #7712: This variable has not been used. [UPRCP]
ice_supersat_frac, uprcp, vprcp, rc_coef_zm, wp4, wp2up2, &
---------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1489): remark #7712: This variable has not been used. [VPRCP]
ice_supersat_frac, uprcp, vprcp, rc_coef_zm, wp4, wp2up2, &
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1489): remark #7712: This variable has not been used. [RC_COEF_ZM]
ice_supersat_frac, uprcp, vprcp, rc_coef_zm, wp4, wp2up2, &
-----------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1489): remark #7712: This variable has not been used. [WP4]
ice_supersat_frac, uprcp, vprcp, rc_coef_zm, wp4, wp2up2, &
-----------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1489): remark #7712: This variable has not been used. [WP2UP2]
ice_supersat_frac, uprcp, vprcp, rc_coef_zm, wp4, wp2up2, &
----------------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1490): remark #7712: This variable has not been used. [WP2VP2]
wp2vp2, um_pert, vm_pert, upwp_pert, vpwp_pert, edsclrm, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1490): remark #7712: This variable has not been used. [UM_PERT]
wp2vp2, um_pert, vm_pert, upwp_pert, vpwp_pert, edsclrm, &
----------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1490): remark #7712: This variable has not been used. [VM_PERT]
wp2vp2, um_pert, vm_pert, upwp_pert, vpwp_pert, edsclrm, &
-------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1490): remark #7712: This variable has not been used. [UPWP_PERT]
wp2vp2, um_pert, vm_pert, upwp_pert, vpwp_pert, edsclrm, &
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1490): remark #7712: This variable has not been used. [VPWP_PERT]
wp2vp2, um_pert, vm_pert, upwp_pert, vpwp_pert, edsclrm, &
---------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1490): remark #7712: This variable has not been used. [EDSCLRM]
wp2vp2, um_pert, vm_pert, upwp_pert, vpwp_pert, edsclrm, &
--------------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1491): remark #7712: This variable has not been used. [RCM_IN_LAYER]
rcm_in_layer, cloud_cover, w_up_in_cloud, w_down_in_cloud, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1491): remark #7712: This variable has not been used. [CLOUD_COVER]
rcm_in_layer, cloud_cover, w_up_in_cloud, w_down_in_cloud, &
----------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1491): remark #7712: This variable has not been used. [W_UP_IN_CLOUD]
rcm_in_layer, cloud_cover, w_up_in_cloud, w_down_in_cloud, &
-----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1491): remark #7712: This variable has not been used. [W_DOWN_IN_CLOUD]
rcm_in_layer, cloud_cover, w_up_in_cloud, w_down_in_cloud, &
--------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1492): remark #7712: This variable has not been used. [CLOUDY_UPDRAFT_FRAC]
cloudy_updraft_frac, cloudy_downdraft_frac, wprcp, &
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1492): remark #7712: This variable has not been used. [CLOUDY_DOWNDRAFT_FRAC]
cloudy_updraft_frac, cloudy_downdraft_frac, wprcp, &
-----------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1492): remark #7712: This variable has not been used. [WPRCP]
cloudy_updraft_frac, cloudy_downdraft_frac, wprcp, &
----------------------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1493): remark #7712: This variable has not been used. [INVRS_TAU_ZM]
invrs_tau_zm, Kh_zt, Kh_zm, thlprcp )
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1493): remark #7712: This variable has not been used. [KH_ZT]
invrs_tau_zm, Kh_zt, Kh_zm, thlprcp )
----------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1493): remark #7712: This variable has not been used. [KH_ZM]
invrs_tau_zm, Kh_zt, Kh_zm, thlprcp )
-----------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1493): remark #7712: This variable has not been used. [THLPRCP]
invrs_tau_zm, Kh_zt, Kh_zm, thlprcp )
------------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90(1674): remark #7712: This variable has not been used. [N]
integer :: i, k, n, status
---------------------^
[46/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/sfc_varnce_module.F90.o
[47/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/mixing_length.F90.o
[48/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/stats_clubb_utilities.F90.o
[49/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_wp2_wp3_module.F90.o
[50/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_xm_wpxp_module.F90.o
[51/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/pdf_closure_module.F90.o
[52/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_xp2_xpyp_module.F90.o
[53/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/advance_clubb_core_module.F90.o
[54/61] Building Fortran object src/CLUBB_core/CMakeFiles/clubb_core_lib.dir/clubb_api_module.F90.o
[55/61] Linking Fortran static library src/CLUBB_core/libclubb_core_lib.a
[56/97] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cloud_sed_module.F90.o
[57/97] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/wangara.F90.o
[58/97] Building Fortran object src/Microphys/Microphys_utils/CMakeFiles/microphys_utils_lib.dir/microphys_stats_vars_module.F90.o
[59/97] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_sw.F.o
[60/97] Building Fortran object src/Radiation/BUGSrad/CMakeFiles/bugsrad_lib.dir/two_rt_lw.F.o
[61/97] Linking Fortran static library src/Microphys/Microphys_utils/libmicrophys_utils_lib.a
[62/109] Linking Fortran static library src/Radiation/BUGSrad/libbugsrad_lib.a
[63/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_utilities.F90.o
[64/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_all_MM.F90.o
[65/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_means.F90.o
[66/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/PDF_integrals_covar.F90.o
[67/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_means.F90.o
[68/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_Nrm_tendencies.F90.o
[69/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_variances.F90.o
[70/109] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/time_dependent_input.F90.o
[71/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_turbulent_sed.F90.o
[72/109] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_nov02.F90.o
[73/109] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/clex9_oct14.F90.o
[74/109] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/jun25.F90.o
[75/109] Building Fortran object src/Microphys/KK_microphys/CMakeFiles/KK_microphys_lib.dir/KK_upscaled_covariances.F90.o
[76/109] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/nov11.F90.o
[77/109] Linking Fortran static library src/Microphys/KK_microphys/libKK_microphys_lib.a
[78/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/bomex.F90.o
[79/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/sfc_flux.F90.o
[80/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cloud_feedback.F90.o
[81/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_97.F90.o
[82/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm.F90.o
[83/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_3year.F90.o
[84/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/arm_0003.F90.o
[85/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/fire.F90.o
[86/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/twp_ice.F90.o
[87/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3.F90.o
[88/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/neutral_case.F90.o
[89/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls3_night.F90.o
[90/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/astex_a209.F90.o
[91/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/lba.F90.o
[92/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf02.F90.o
[93/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/rico.F90.o
[94/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/dycoms2_rf01.F90.o
[95/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/gabls2.F90.o
[96/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_b.F90.o
[97/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/cobra.F90.o
[98/115] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/transform_to_pdf_module.F90.o
[99/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/mpace_a.F90.o
[100/115] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/output_2D_samples_module.F90.o
[101/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/atex.F90.o
[102/115] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_importance_sample_module.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/SILHS/silhs_importance_sample_module.F90(901): warning #5462: Global name too long, shortened from: silhs_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER to: s_importance_sample_moduleeight_cluster_allocation_mp_NUM_CATEGORIES_IN_CLUSTER
num_categories_in_cluster = (/ 1, 1, 1, 1, 1, 1, 1, 1 /)
------^
[103/115] Building Fortran object src/Benchmark_cases/CMakeFiles/benchmark_cases_lib.dir/prescribe_forcings.F90.o
[104/115] Building Fortran object src/Microphys/Morrison_microphys/CMakeFiles/morrison_microphys_lib.dir/module_mp_graupel.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6326): remark #7712: This variable has not been used. [I]
INTEGER:: i, k, k_0
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(749): remark #7712: This variable has not been used. [ITIMESTEP]
SUBROUTINE MP_GRAUPEL(ITIMESTEP, &
----------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(750): remark #7712: This variable has not been used. [TKE]
TH, QV, QC, QR, QI, QS, QG, NI, NC, NS, NR, NG, TKE, NCTEND, &
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [RHO]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(752): remark #7712: This variable has not been used. [HT]
RHO, PII, P, DT_IN, DZ, HT, W, &
----------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [IDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [JDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
-----------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDS]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
----------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(758): remark #7712: This variable has not been used. [KDE]
,IDS,IDE, JDS,JDE, KDS,KDE & ! domain dims
--------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IMS]
IMS,IME, JMS,JME, KMS,KME,&
------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [IME]
IMS,IME, JMS,JME, KMS,KME,&
----------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JMS]
IMS,IME, JMS,JME, KMS,KME,&
---------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1055): remark #7712: This variable has not been used. [JME]
IMS,IME, JMS,JME, KMS,KME,&
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [ITE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
----------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTS]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
---------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1056): remark #7712: This variable has not been used. [JTE]
ITS,ITE, JTS,JTE, KTS,KTE,& ! ADD GRAUPEL
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QGSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
----------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QRSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-----------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
-------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QNISTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
---------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(860): remark #7712: This variable has not been used. [QCSTEN]
QGSTEN,QRSTEN, QISTEN, QNISTEN, QCSTEN, &
------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1231): remark #7712: This variable has not been used. [PCCN]
REAL, DIMENSION(KMS:KME) :: PCCN ! CHANGE Q DROPLET ACTIVATION
----------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1316): remark #7712: This variable has not been used. [COFFI]
REAL COFFI ! ICE AUTOCONVERSION PARAMETER
-------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1325): remark #7712: This variable has not been used. [RHO2]
REAL FALTNDR,FALTNDI,FALTNDNI,RHO2
------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5435): remark #7712: This variable has not been used. [DUM]
REAL DUM
-----------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1350): remark #7712: This variable has not been used. [DUMQSI]
REAL DUM,DUM1,DUM2,DUMT,DUMQV,DUMQSS,DUMQSI,DUMS,TMPNUM
------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1382): remark #7712: This variable has not been used. [CT]
REAL CT ! DROPLET ACTIVATION PARAMETER
-------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1383): remark #7712: This variable has not been used. [TEMP1]
REAL TEMP1 ! DUMMY TEMPERATURE
-------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1384): remark #7712: This variable has not been used. [SAT1]
REAL SAT1 ! DUMMY SATURATION
-------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1386): remark #7712: This variable has not been used. [KEL]
REAL KEL ! KELVIN PARAMETER
-------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [CRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1389): remark #7712: This variable has not been used. [KRY]
REAL CRY,KRY ! AEROSOL ACTIVATION PARAMETERS
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMQI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DUMNI]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DC0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
----------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DS0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
--------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1393): remark #7712: This variable has not been used. [DG0]
REAL DUMQI,DUMNI,DC0,DS0,DG0
------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1394): remark #7712: This variable has not been used. [DUMQR]
REAL DUMQC,DUMQR,RATIO,SUM_DEP,FUDGEF
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1397): remark #7712: This variable has not been used. [WEF]
REAL WEF
----------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [ANUC]
REAL ANUC,BNUC
-----------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(1401): remark #7712: This variable has not been used. [BNUC]
REAL ANUC,BNUC
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5967): remark #7712: This variable has not been used. [LAMBDA]
meltratio_outside, m_w, m_i, lambda, C_back, &
--------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5904): remark #7712: This variable has not been used. [SIGMA]
REAL(8):: alpha,lambdas,sigma,nenner
------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(5981): remark #7712: This variable has not been used. [XW_A]
REAL(8):: D_large, D_g, rhog, x_w, xw_a, fm, fmgrenz, &
-----------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [II]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/Morrison_microphys/module_mp_graupel.F90(6305): remark #7712: This variable has not been used. [JJ]
kts, kte, ii, jj, nr1d, ns1d, ng1d)
----------------------------------------^
[105/115] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/latin_hypercube_driver_module.F90.o
[106/115] Linking Fortran static library src/Benchmark_cases/libbenchmark_cases_lib.a
[107/115] Linking Fortran static library src/Microphys/Morrison_microphys/libmorrison_microphys_lib.a
[108/115] Building Fortran object src/SILHS/CMakeFiles/silhs_lib.dir/silhs_api_module.F90.o
[109/115] Linking Fortran static library src/SILHS/libsilhs_lib.a
[110/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/silhs_category_test.F90.o
[111/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_heaviside_tests.F90.o
[112/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/ice_dfsn_module.F90.o
[113/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/Nc_Ncn_test.F90.o
[114/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/gfdl_activation.F90.o
[115/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/read_corr_mtx_test.F90.o
[116/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/corr_cholesky_mtx_tests.F90.o
[117/150] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/rad_lwsw_module.F90.o
[118/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/silhs_category_variance_module.F90.o
[119/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/hole_filling_tests.F90.o
[120/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/smooth_min_max_tests.F90.o
[121/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/KK_integrals_tests.F90.o
[122/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/mixed_moment_PDF_integrals.F90.o
[123/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/w_up_in_cloud_tests.F90.o
[124/150] Building Fortran object src/CMakeFiles/G_unit_tests.dir/G_unit_tests.F90.o
[125/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/fill_holes_tests.F90.o
[126/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/mu_sigma_hm_tests.F90.o
[127/150] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/simple_rad_module.F90.o
[128/150] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/bugsrad_driver.F90.o
[129/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/pdf_hydromet_microphys_wrapper.F90.o
[130/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/spurious_source_test.F90.o
[131/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/advance_microphys_module.F90.o
[132/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/coamps_microphys_driver_module.F90.o
[133/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/KK_microphys_module.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/KK_microphys_module.F90(43): remark #7712: This variable has not been used. [GR]
subroutine KK_local_microphys( gr, dt, nzt, & ! In
---------------------------------^
[134/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_init_cleanup.F90.o
[135/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/pdf_parameter_tests.F90.o
[136/150] Building Fortran object src/G_unit_test_types/CMakeFiles/G_unit_test_lib.dir/rev_direction_grid_test.F90.o
[137/150] Linking Fortran static library src/G_unit_test_types/libG_unit_test_lib.a
[138/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/morrison_microphys_module.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/Microphys/morrison_microphys_module.F90(20): remark #7712: This variable has not been used. [SATURATION_FORMULA]
saturation_formula, &
---------------^
[139/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/estimate_scm_microphys_module.F90.o
[140/150] Linking Fortran executable src/G_unit_tests
[141/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/lh_microphys_driver_module.F90.o
[142/150] Building Fortran object src/Radiation/CMakeFiles/radiation_lib.dir/radiation_module.F90.o
[143/150] Linking Fortran static library src/Radiation/libradiation_lib.a
[144/150] Building Fortran object src/Microphys/CMakeFiles/microphys_lib.dir/microphys_driver.F90.o
[145/150] Linking Fortran static library src/Microphys/libmicrophys_lib.a
[146/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/soil_vegetation.F90.o
[147/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/hydrostatic_module.F90.o
[148/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/stat_file_utils.F90.o
[149/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_interpret.F90.o
[150/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/sounding.F90.o
[151/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/input_fields.F90.o
[152/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/generalized_grid_test.F90.o
[153/159] Building Fortran object src/CMakeFiles/clubb_driver_lib.dir/clubb_driver.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90(4171): remark #7712: This variable has not been used. [CLUBB_PARAMS]
subroutine clean_up_clubb(ngrdcol, clubb_params, err_info)
-------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90(4171): remark #7712: This variable has not been used. [ERR_INFO]
subroutine clean_up_clubb(ngrdcol, clubb_params, err_info)
---------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90(2634): remark #7712: This variable has not been used. [ERR_INFO]
subroutine set_case_initial_conditions(ngrdcol, clubb_params, err_info)
----------------------------------------------------------------^
/home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90(4628): remark #7712: This variable has not been used. [GRID_ADAPT_IN_TIME_METHOD]
grid_adapt_in_time_method, &
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90(4627): remark #7712: This variable has not been used. [L_ADD_DYCORE_GRID]
l_add_dycore_grid, &
----------------^
/home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90(3163): remark #7712: This variable has not been used. [RET_CODE]
ret_code, &
------^
[154/159] Linking Fortran static library src/libclubb_driver_lib.a
[155/164] Building Fortran object src/CMakeFiles/clubb_thread_test.dir/clubb_thread_test.F90.o
[156/164] Building Fortran object src/CMakeFiles/clubb_standalone.dir/clubb_standalone.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/clubb_standalone.F90(66): remark #7712: This variable has not been used. [ARG]
character(len=10) :: arg
-----------------------^
[157/164] Building Fortran object src/CMakeFiles/clubb_driver_test.dir/clubb_driver_test.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/clubb_driver_test.F90(74): remark #7712: This variable has not been used. [ARG]
character(len=10) :: arg
-----------------------^
[158/164] Linking Fortran executable src/clubb_thread_test
[159/164] Linking Fortran executable src/clubb_standalone
[160/164] Linking Fortran executable src/clubb_driver_test
[161/164] Building Fortran object src/CMakeFiles/clubb_tuner.dir/error.F90.o
[162/164] Building Fortran object src/CMakeFiles/clubb_tuner.dir/clubb_tuner.F90.o
/home/jenkins/workspace/clubb_cmake_test/src/clubb_tuner.F90(86): warning #8889: Explicit interface or EXTERNAL declaration is required. [PARAM_LOOPS_DRIVER]
call param_loops_driver( )
---------------^
[163/164] Linking Fortran executable src/clubb_tuner
[163/164] Install the project...
-- Install configuration: "Release"
-- Installing: /home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/libclubb_driver_lib.a
-- Installing: /home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_tuner
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_tuner" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/G_unit_tests
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/G_unit_tests" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_thread_test
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_thread_test" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_standalone
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_standalone" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
-- Installing: /home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_driver_test
-- Set runtime path of "/home/jenkins/workspace/clubb_cmake_test/install/ifx_PRECdouble/clubb_driver_test" to "/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf:/usr/local/spack/opt/spack/linux-pop22-cascadelake/oneapi-2023.2.0/netcdf-fortran-4.5.3-dse32dm7kmsorqtyicefw5hz4kl24mhf/lib"
check_for_missing_threadprivate.py has begun.
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/corr_varnce_module.F90 failed:
Missing threadprivate for:
corr_array_n_below_def
corr_array_n_cloud_def
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/error_code.F90 failed:
Missing threadprivate for:
clubb_debug_level
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/sponge_layer_damping.F90 failed:
Missing threadprivate for:
wp2_sponge_damp_profile
wp2_sponge_damp_settings
thlm_sponge_damp_profile
rtm_sponge_damp_settings
thlm_sponge_damp_settings
wp3_sponge_damp_profile
wp3_sponge_damp_settings
uv_sponge_damp_profile
up2_vp2_sponge_damp_settings
rtm_sponge_damp_profile
uv_sponge_damp_settings
up2_vp2_sponge_damp_profile
File /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/fill_holes.F90 failed:
Missing threadprivate for:
ret_code
[91mcheck_for_missing_threadprivate.py did not pass.[0m
[91mfailedFiles = ['/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/corr_varnce_module.F90', '/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/error_code.F90', '/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/sponge_layer_damping.F90', '/home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/fill_holes.F90'][0m
[91m===============================================================
[91mTHREADPRIVATE CHECK FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_cmake_test/build/ifx_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/sounding.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 377 : 102 chars : um(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 379 : 101 chars : vm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 381 : 101 chars : ugm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 383 : 101 chars : vgm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 385 : 101 chars : thlm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 387 : 101 chars : rtm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 389 : 101 chars : press(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 392 : 101 chars : wm(i,k) = mono_cubic_interp( gr%zt(i,k), km1, k00, kp1, kp2, z(km1), z(k00), z(kp1), &
line 409 : 108 chars : edsclr_snd(km1,edsclr), edsclr_snd(k00,edsclr), &
line 410 : 107 chars : edsclr_snd(kp1,edsclr), edsclr_snd(kp2,edsclr) )
line 434 : 118 chars : um(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), u(k_above), u(k_above-1) )
line 435 : 118 chars : vm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), v(k_above), v(k_above-1) )
line 436 : 120 chars : ugm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), ug(k_above), ug(k_above-1) )
line 437 : 120 chars : vgm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), vg(k_above), vg(k_above-1) )
line 438 : 126 chars : thlm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), theta(k_above), theta(k_above-1) )
line 439 : 120 chars : rtm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), rt(k_above), rt(k_above-1) )
line 440 : 112 chars : press(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), p_in_Pa(k_above), &
line 442 : 122 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
line 446 : 105 chars : sclrm(i,k,sclr) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), &
line 452 : 109 chars : edsclrm(i,k,edsclr) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), &
line 481 : 124 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
line 507 : 124 chars : wm(i,k) = lin_interpolate_two_points( gr%zt(i,k), z(k_above), z(k_above-1), subs(k_above), subs(k_above-1) )
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/generalized_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 3: module generalized_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/generalized_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 908 : 106 chars : pdf_params_zm_flip%ice_supersat_frac_1(i,:) = flip( pdf_params_zm%ice_supersat_frac_1(i,:), nzm )
line 909 : 106 chars : pdf_params_zm_flip%ice_supersat_frac_2(i,:) = flip( pdf_params_zm%ice_supersat_frac_2(i,:), nzm )
line 911 : 117 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1080 : 101 chars : rtm_ref_flip, thlm_ref_flip, um_ref_flip, vm_ref_flip, ug_flip, vg_flip, & ! Intent(in)
line 1094 : 111 chars : um_flip, vm_flip, upwp_flip, vpwp_flip, up2_flip, vp2_flip, up3_flip, vp3_flip, & ! Intent(inout)
line 1096 : 111 chars : wp2_flip, wp3_flip, rtp2_flip, rtp3_flip, thlp2_flip, thlp3_flip, rtpthlp_flip, & ! Intent(inout)
line 1102 : 109 chars : wp2rtp_flip, wp2thlp_flip, uprcp_flip, vprcp_flip, rc_coef_zm_flip, wp4_flip, & ! intent(inout)
line 1103 : 105 chars : wpup2_flip, wpvp2_flip, wp2up2_flip, wp2vp2_flip, ice_supersat_frac_flip, & ! intent(inout)
line 1587 : 115 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 1614 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2up_implicit, nzt, ngrdcol, &
line 1618 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2up_explicit, nzt, ngrdcol, &
line 1622 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wp2vp_implicit, nzt, ngrdcol, &
line 1626 : 102 chars : pdf_implicit_coefs_terms_flip%term_wp2vp_explicit, nzt, ngrdcol, &
line 1660 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpup2_implicit, nzt, ngrdcol, &
line 1664 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpup2_explicit, nzt, ngrdcol, &
line 1668 : 102 chars : pdf_implicit_coefs_terms_flip%coef_wpvp2_implicit, nzt, ngrdcol, &
line 1672 : 102 chars : pdf_implicit_coefs_terms_flip%term_wpvp2_explicit, nzt, ngrdcol, &
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90 ---------------------
WARNING: 'use' statements without 'only' found in the following lines:
WARNING: Check that comma is on same line as 'use', as CLUBB requires.
3115 : use gptl
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_driver.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 198 : 110 chars : l_modify_ic_with_cubic_int, & ! Flag for interpolating the sounding profile with Steffen's monotone cubic
line 199 : 110 chars : ! method to obtain smoother initial condition profile, which is found to be
line 200 : 111 chars : ! beneficial to achive a better numerical solution convergence. If this flag
line 201 : 118 chars : ! is turned off, the initial conditions will be generated with linear interpolation.
line 202 : 111 chars : ! This is done on a case-by-case basis, since using the monotone cubic method
line 203 : 109 chars : ! requires a special sounding.in file with many additional sounding levels.
line 204 : 109 chars : l_modify_bc_for_cnvg_test, & ! Flag to activate modifications on boundary condition for convergence test
line 736 : 101 chars : !$omp sens_ht, latent_ht, lmin, vert_decorr_coef, deep_soil_T_in_K, sfc_soil_T_in_K, veg_T_in_K, &
line 752 : 102 chars : !$omp rtp2_mc, thlp2_mc, rtpthlp_mc, Ncm_mc, Ncm, Nccnm, em, tau_zm, tau_zt, Kh_zt, Kh_zm, rfrzm, &
line 753 : 105 chars : !$omp rrm, Nrm, Nc_in_cloud, wpNcp, radht, Frad, Frad_SW_up, Frad_LW_up, Frad_SW_down, Frad_LW_down, &
line 754 : 102 chars : !$omp wpsclrp_sfc, wpedsclrp_sfc, sclrm, wpsclrp, sclrp2, sclrp3, sclrprtp, sclrpthlp, sclrpthvp, &
line 799 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 1017 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 1691 : 102 chars : open(unit=iunit_grid_adaptation, file=fname_grid_adaptation, status='replace', action='write')
line 2004 : 105 chars : allocate( um_ref(ngrdcol, gr%nzt) ) ! Reference u wind for nudging; Michael Falk, 17 Oct 2007
line 2005 : 105 chars : allocate( vm_ref(ngrdcol, gr%nzt) ) ! Reference v wind for nudging; Michael Falk, 17 Oct 2007
line 2495 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 2526 : 106 chars : ! Similar call to above, checking parameter values, but because we've placed this in "init_clubb_case"
line 2534 : 116 chars : write(fstderr, *) "Fatal error calling check_clubb_settings_api and/or check_parameters_api in clubb_driver"
line 2577 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 2589 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 2590 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 2593 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 2595 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 2601 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 2602 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 2603 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 2604 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 2605 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 2606 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 2607 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 2608 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 2609 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 2610 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 2725 : 103 chars : invrs_rho_ds_zt(i,k) = invrs_rho_ds_zt_init(k) ! inv. dry, static density: t-levs
line 2731 : 103 chars : um_pert(i,k) = zero ! Variables used to track perturbed version of winds.
line 2733 : 105 chars : wm_zt(i,k) = wm_zt_init(k) ! Imposed large scale w - Thermodynamic levels
line 2926 : 113 chars : if ( clubb_config_flags%iiPDF_type == iiPDF_new .or. clubb_config_flags%iiPDF_type == iiPDF_new_hybrid ) then
line 3136 : 101 chars : !----------------------------------- Optional Input Variables -----------------------------------
line 3292 : 103 chars : um(i,:), vm(i,:), rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), &
line 3630 : 111 chars : !$acc X_nl_all_levs, X_mixt_comp_all_levs, lh_sample_point_weights, mu_x_1_n, mu_x_2_n, &
line 3632 : 104 chars : !$acc lh_rt_clipped, lh_thl_clipped, lh_rc_clipped, lh_rv_clipped, lh_Nc_clipped, &
line 3636 : 116 chars : !$acc pdf_params%cloud_frac_1, pdf_params%cloud_frac_2, pdf_params%cthl_1, pdf_params%cthl_2, &
line 3637 : 112 chars : !$acc pdf_params%crt_1, pdf_params%crt_2, pdf_params%stdev_chi_1, pdf_params%stdev_chi_2, &
line 3653 : 102 chars : wp2_zt = zm2zt_api( gr%nzm, gr%nzt, ngrdcol, gr, wp2, w_tol_sqd ) ! Positive definite quantity
line 3659 : 109 chars : thlm(i,:), p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), rtm(i,:), &! In
line 3660 : 109 chars : rcm(i,:), cloud_frac(i,:), wm_zt(i,:), wm_zm(i,:), wp2_zt(i,:), & ! In
line 3661 : 106 chars : hydromet(i,:,:), Nc_in_cloud(i,:), & ! In
line 3677 : 103 chars : stats_zt(i), stats_zm(i), & ! Inout
line 3678 : 103 chars : stats_sfc(i), stats_lh_zt(i), & ! Inout
line 3679 : 102 chars : Nccnm(i,:), & ! Inout
line 3680 : 117 chars : hydromet_mc(i,:,:), Ncm_mc(i,:), rcm_mc(i,:), rvm_mc(i,:), & ! Out
line 3681 : 107 chars : thlm_mc(i,:), hydromet_vel_zt(i,:,:), & ! Out
line 3682 : 102 chars : hydromet_vel_covar_zt_impc(i,:,:), & ! Out
line 3683 : 102 chars : hydromet_vel_covar_zt_expc(i,:,:), & ! Out
line 3684 : 110 chars : wprtp_mc(i,:), wpthlp_mc(i,:), rtp2_mc(i,:), & ! Out
line 3685 : 105 chars : thlp2_mc(i,:), rtpthlp_mc(i,:) ) ! Out
line 3710 : 103 chars : stats_zt(i), stats_zm(i), stats_sfc(i), & ! Inout
line 3711 : 103 chars : hydromet(i,:,:), hydromet_vel_zt(i,:,:), hydrometp2(i,:,:), & ! Inout
line 3712 : 103 chars : K_hm(i,:,:), Ncm(i,:), Nc_in_cloud(i,:), rvm_mc(i,:), & ! Inout
line 3713 : 103 chars : thlm_mc(i,:), err_info, & ! Inout
line 3714 : 101 chars : wphydrometp(i,:,:), wpNcp(i,:) ) ! Out
line 3723 : 106 chars : !$acc update device( rcm_mc, rvm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3781 : 104 chars : !$acc update host( rvm_mc, rcm_mc, thlm_mc, wprtp_mc, wpthlp_mc, rtp2_mc, thlp2_mc, rtpthlp_mc )
line 3787 : 105 chars : call stat_update_var( stats_metadata%irtm_mc, rvm_mc(i,:)+rcm_mc(i,:), stats_zt(i) ) ! kg/kg/s
line 3789 : 106 chars : call stat_update_var( stats_metadata%iwprtp_mc, wprtp_mc(i,:), stats_zm(i) ) ! m*(kg/kg)/s^2
line 3791 : 104 chars : call stat_update_var( stats_metadata%irtp2_mc, rtp2_mc(i,:), stats_zm(i) ) ! (kg/kg)^2/s
line 3793 : 104 chars : call stat_update_var( stats_metadata%irtpthlp_mc, rtpthlp_mc(i,:), stats_zm(i) ) ! K*(kg/kg)/s
line 3810 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, X_nl_all_levs, &
line 3836 : 105 chars : !$acc update host( rho, rho_zm, p_in_Pa, exner, cloud_frac, ice_supersat_frac, thlm, rtm, rcm )
line 3882 : 106 chars : call update_radiation_variables( gr%nzm, gr%nzt, radht(i,:), Frad_SW_up(i,:), Frad_LW_up(i,:), &
line 3981 : 104 chars : clubb_config_flags%grid_remap_method, & ! intent(in)
line 4049 : 101 chars : .and. (stats_metadata%l_stats_last) ) then ! only adapt grid when the average of the last
line 4154 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_scheme = ', time_microphys_scheme
line 4155 : 104 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_microphys_advance = ', time_microphys_advance
line 4157 : 103 chars : write(unit=fstdout, fmt='(a,f10.4)') 'CLUBB-TIMER time_output_multi_col = ', time_output_multi_col
line 4284 : 111 chars : !$acc rcm_in_layer, cloud_cover, wprcp, w_up_in_cloud, w_down_in_cloud, cloudy_updraft_frac, &
line 4296 : 101 chars : !$acc pdf_params%corr_w_thl_2, pdf_params%corr_rt_thl_1, pdf_params%corr_rt_thl_2, &
line 4297 : 103 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 4300 : 104 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 4302 : 103 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
line 4308 : 101 chars : !$acc pdf_params_zm%thl_2, pdf_params_zm%varnce_thl_1, pdf_params_zm%varnce_thl_2, &
line 4309 : 106 chars : !$acc pdf_params_zm%corr_w_rt_1, pdf_params_zm%corr_w_rt_2, pdf_params_zm%corr_w_thl_1, &
line 4310 : 110 chars : !$acc pdf_params_zm%corr_w_thl_2, pdf_params_zm%corr_rt_thl_1, pdf_params_zm%corr_rt_thl_2, &
line 4311 : 115 chars : !$acc pdf_params_zm%alpha_thl, pdf_params_zm%alpha_rt, pdf_params_zm%crt_1, pdf_params_zm%crt_2, &
line 4312 : 110 chars : !$acc pdf_params_zm%cthl_1, pdf_params_zm%cthl_2, pdf_params_zm%chi_1, pdf_params_zm%chi_2, &
line 4313 : 105 chars : !$acc pdf_params_zm%stdev_chi_1, pdf_params_zm%stdev_chi_2, pdf_params_zm%stdev_eta_1, &
line 4314 : 113 chars : !$acc pdf_params_zm%stdev_eta_2, pdf_params_zm%covar_chi_eta_1, pdf_params_zm%covar_chi_eta_2, &
line 4315 : 108 chars : !$acc pdf_params_zm%corr_w_chi_1, pdf_params_zm%corr_w_chi_2, pdf_params_zm%corr_w_eta_1, &
line 4316 : 112 chars : !$acc pdf_params_zm%corr_w_eta_2, pdf_params_zm%corr_chi_eta_1, pdf_params_zm%corr_chi_eta_2, &
line 4317 : 110 chars : !$acc pdf_params_zm%rsatl_1, pdf_params_zm%rsatl_2, pdf_params_zm%rc_1, pdf_params_zm%rc_2, &
line 4346 : 119 chars : if ( thlm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( thlm_sponge_damp_profile )
line 4347 : 118 chars : if ( rtm_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( rtm_sponge_damp_profile )
line 4348 : 117 chars : if ( uv_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( uv_sponge_damp_profile )
line 4349 : 118 chars : if ( wp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp2_sponge_damp_profile )
line 4350 : 118 chars : if ( wp3_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( wp3_sponge_damp_profile )
line 4351 : 122 chars : if ( up2_vp2_sponge_damp_settings%l_sponge_damping ) call finalize_tau_sponge_damp_api( up2_vp2_sponge_damp_profile )
line 5027 : 104 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 5035 : 106 chars : clubb_config_flags%l_add_dycore_grid, clubb_config_flags%grid_adapt_in_time_method )
line 5049 : 101 chars : 'be used for cases with forcings from an input file and for the atex ', &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/soil_vegetation.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 174 : 103 chars : call stat_update_var_pt( stats_metadata%isfc_soil_T_in_K, 1, sfc_soil_T_in_K(i), stats_sfc(i) )
line 175 : 105 chars : call stat_update_var_pt( stats_metadata%ideep_soil_T_in_K, 1, deep_soil_T_in_K(i), stats_sfc(i) )
line 212 : 101 chars : call stat_update_var_pt( stats_metadata%isoil_heat_flux, 1, soil_heat_flux(i), & ! intent(in)
line 213 : 104 chars : stats_sfc(i) ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_tuner.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 650 : 102 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/clubb_driver_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 111 : 107 chars : write(fstderr, *) "This section ensures that everything allocated in init_clubb_case will be deallocated"
line 112 : 102 chars : write(fstderr, *) "in clean_up_clubb. This may cause a runtime error if there is a mismatch between"
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 8 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_xm_wpxp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 784 : 101 chars : call wpxp_term_pr1_lhs( nzm, ngrdcol, gr, C6rt_Skw_fnc, C6thl_Skw_fnc, C7_Skw_fnc, & ! Intent(in)
line 785 : 101 chars : invrs_tau_C6_zm, l_scalar_calc, & ! Intent(in)
line 786 : 102 chars : lhs_pr1_wprtp, lhs_pr1_wpthlp, lhs_pr1_wpsclrp ) ! Intent(out)
line 865 : 101 chars : stats_zt, stats_zm, stats_sfc, & ! InOut
line 866 : 101 chars : rtm, wprtp, thlm, wpthlp, sclrm, wpsclrp, & ! InOut
line 867 : 101 chars : err_info ) ! InOut
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/sfc_varnce_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 776 : 105 chars : call sfc_varnce_check( sclr_dim, wp2(i,gr%k_lb_zm), up2(i,gr%k_lb_zm), & ! intent(in)
line 777 : 105 chars : vp2(i,gr%k_lb_zm), thlp2(i,gr%k_lb_zm), rtp2(i,gr%k_lb_zm), & ! intent(in)
line 778 : 105 chars : rtpthlp(i,gr%k_lb_zm), sclrp2(i,gr%k_lb_zm,:), & ! intent(in)
line 779 : 105 chars : sclrprtp(i,gr%k_lb_zm,:), sclrpthlp(i,gr%k_lb_zm,:), & ! intent(in)
line 780 : 108 chars : err_info ) ! intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/grid_adaptation_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 128 chars : write(fstderr, *) "The fixed minimum grid density momentum heights need to cover at least the domain of the physics grid."
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/pdf_parameter_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 295 : 101 chars : !$acc pdf_params%alpha_thl, pdf_params%alpha_rt, pdf_params%crt_1, pdf_params%crt_2, &
line 298 : 102 chars : !$acc pdf_params%stdev_eta_2, pdf_params%covar_chi_eta_1, pdf_params%covar_chi_eta_2, &
line 300 : 101 chars : !$acc pdf_params%corr_w_eta_2, pdf_params%corr_chi_eta_1, pdf_params%corr_chi_eta_2, &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/clubb_api_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2523 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
line 2590 : 107 chars : ! calc_derrived_params_api - Adjusts values of background eddy diffusivity based on vertical grid spacing
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/stats_clubb_utilities.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 3024 : 103 chars : call stat_update_var( stats_metadata%icovar_chi_eta_1, pdf_params%covar_chi_eta_1(icol,:), & ! In
line 3026 : 103 chars : call stat_update_var( stats_metadata%icovar_chi_eta_2, pdf_params%covar_chi_eta_2(icol,:), & ! In
line 3036 : 101 chars : call stat_update_var( stats_metadata%icorr_chi_eta_1, pdf_params%corr_chi_eta_1(icol,:), & ! In
line 3038 : 101 chars : call stat_update_var( stats_metadata%icorr_chi_eta_2, pdf_params%corr_chi_eta_2(icol,:), & ! In
line 3099 : 101 chars : chip2 = compute_variance_binormal( chi, pdf_params%chi_1(icol,:), pdf_params%chi_2(icol,:), &
line 3100 : 106 chars : pdf_params%stdev_chi_1(icol,:), pdf_params%stdev_chi_2(icol,:), &
line 4119 : 108 chars : 'floor stuff= ', floor( stats_metadata%stats_tout / stats_metadata%stats_tsamp )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_windm_edsclrm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1002 : 103 chars : call windm_edsclrm_rhs( nzm, nzt, ngrdcol, gr, windm_edsclrm_scalar, dt, & ! intent(in)
line 1003 : 103 chars : lhs_diff, edsclrm(:,:,edsclr), & ! intent(in)
line 1004 : 103 chars : edsclrm_forcing(:,:,edsclr), & ! intent(in)
line 1005 : 103 chars : rho_ds_zm, invrs_rho_ds_zt, & ! intent(in)
line 1006 : 103 chars : l_imp_sfc_momentum_flux, wpedsclrp(:,gr%k_lb_zm,edsclr), & ! intent(in)
line 1007 : 103 chars : stats_metadata, & ! intent(in)
line 1008 : 106 chars : stats_zt, & ! intent(inout)
line 1009 : 104 chars : rhs(:,:,edsclr) ) ! intent(out)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/parameters_tunable.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 839 : 106 chars : / sqrt( 4.0_core_rknd * ( 1.0_core_rknd - 0.4_core_rknd )**3 &
line 840 : 118 chars : + clubb_params(ngrdcol,iSkw_max_mag)**2 ) ) ) ! Known magic number
line 902 : 117 chars : mult_factor_zt(i) = 1.0_core_rknd + clubb_params(i,imult_coef) * log( avg_deltaz(i) / grid_spacing_thresh )
line 917 : 104 chars : nu_vert_res_dep%nu10(i) = clubb_params(i,inu10) * mult_factor_zt(i) !We're unsure of the grid
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/mono_flux_limiter.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 688 : 104 chars : !$acc parallel loop gang vector collapse(2) default(present) reduction(.or.:l_any_adjustment_needed)
line 839 : 121 chars : ! MONOFLUX TEST COMMENT DO NOT REMOVE if( any(wpxp_net_adjust /= 0.0) ) write(fstderr,*) "MONOFLUX: wpxp adjusted "
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/model_flags.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 307 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 527 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
line 823 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 4: module err_info_type_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/err_info_type_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 265 : 102 chars : write(err_info%err_header_global,'(A38, I3, A15, I3, A, A28, A33, F6.2, A1, F6.2, A, A39, A40)') &
line 276 : 105 chars : write(err_info%err_header(i),'(A38, I3, A15, I3, A, A22, I2, A11, F6.2, A13, F6.2, A, A39, A40)') &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/fill_holes.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 233 : 113 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 241 : 105 chars : write(fstderr, *) "column", i, " field average = ", sum(field(i,:) * rho_ds(i,:) * dz(i,:)) &
line 583 : 102 chars : ! rho_ds_dz(i,k-num_hf_draw_points:k+num_hf_draw_points))
line 822 : 110 chars : * min( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 827 : 106 chars : + mass_fraction * ( min( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
line 832 : 110 chars : * max( threshold, field(i,k_start:k_end:grid_dir_indx) ) ) * invrs_denom
line 839 : 108 chars : + mass_fraction * ( max( threshold, field(i,k_start:k_end:grid_dir_indx) ) - threshold )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/stats_zm_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 2449 : 104 chars : call stat_assign( var_index=stats_metadata%inorm_min_grid_dens, var_name="norm_min_grid_dens", &
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/advance_xp2_xpyp_module.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1330 : 101 chars : sclrprtp(:,:,sclr) ) ! Intent(inout)
line 1365 : 102 chars : sclrpthlp(:,:,sclr) ) ! Intent(inout)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/CLUBB_core/output_netcdf.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 1746 : 105 chars : status = nf90_def_var( ncid_zm, "columns", NF90_INT, (/column_id_zm/), column_var_id_zm )
line 1747 : 104 chars : status = nf90_def_var( ncid_zm, "altitude", NF90_PREC, (/vertical_id_zm/), vertical_var_id_zm )
line 1748 : 104 chars : status = nf90_def_var( ncid_zm, "time", NF90_PREC, (/time_id_zm/), time_var_id_zm )
line 1800 : 105 chars : status = nf90_def_var( ncid_zt, "columns", NF90_INT, (/column_id_zt/), column_var_id_zt )
line 1801 : 104 chars : status = nf90_def_var( ncid_zt, "altitude", NF90_PREC, (/vertical_id_zt/), vertical_var_id_zt )
line 1802 : 104 chars : status = nf90_def_var( ncid_zt, "time", NF90_PREC, (/time_id_zt/), time_var_id_zt )
line 1848 : 101 chars : status = nf90_put_var( ncid_zm, column_var_id_zm, column_list, start=(/1/), count=(/ngrdcol/) )
line 1849 : 101 chars : status = nf90_put_var( ncid_zt, column_var_id_zt, column_list, start=(/1/), count=(/ngrdcol/) )
line 1851 : 101 chars : !=================================== Allocate Output Arrays ===================================
line 1978 : 116 chars : !$acc upwp_out, vpwp_out, up2_out, vp2_out, wp3_out, rcm_out, cloud_frac_out, rtm_out, thlm_out )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 16 check(s) failed.
CLUBBStandardsCheck.py has begun.
----------------------------------------------------------------------------------------------------
--------------------- Implicit None Check: /home/jenkins/workspace/clubb_cmake_test/src/SILHS/mt95.F90 ---------------------
WARNING: Missing 'implicit none' after these blocks:
line 362: subroutine init_by_type( put, get )
line 382: subroutine init_by_scalar( put )
line 413: subroutine init_by_array( put )
line 461: subroutine next_state( )
line 593: subroutine genrand_int32_0d( y )
line 614: subroutine genrand_int32_1d( y )
line 629: subroutine genrand_int32_2d( y )
line 644: subroutine genrand_int32_3d( y )
line 659: subroutine genrand_int32_4d( y )
line 674: subroutine genrand_int32_5d( y )
line 689: subroutine genrand_int32_6d( y )
line 704: subroutine genrand_int32_7d( y )
line 720: subroutine genrand_int31_0d( y )
line 732: subroutine genrand_int31_1d( y )
line 747: subroutine genrand_int31_2d( y )
line 762: subroutine genrand_int31_3d( y )
line 777: subroutine genrand_int31_4d( y )
line 792: subroutine genrand_int31_5d( y )
line 807: subroutine genrand_int31_6d( y )
line 822: subroutine genrand_int31_7d( y )
line 838: subroutine genrand_real1_0d( r )
line 853: subroutine genrand_real1_1d( r )
line 868: subroutine genrand_real1_2d( r )
line 883: subroutine genrand_real1_3d( r )
line 898: subroutine genrand_real1_4d( r )
line 913: subroutine genrand_real1_5d( r )
line 928: subroutine genrand_real1_6d( r )
line 943: subroutine genrand_real1_7d( r )
line 959: subroutine genrand_real2_0d( r )
line 974: subroutine genrand_real2_1d( r )
line 989: subroutine genrand_real2_2d( r )
line 1004: subroutine genrand_real2_3d( r )
line 1019: subroutine genrand_real2_4d( r )
line 1034: subroutine genrand_real2_5d( r )
line 1049: subroutine genrand_real2_6d( r )
line 1064: subroutine genrand_real2_7d( r )
line 1080: subroutine genrand_real3_0d( r )
line 1095: subroutine genrand_real3_1d( r )
line 1110: subroutine genrand_real3_2d( r )
line 1125: subroutine genrand_real3_3d( r )
line 1140: subroutine genrand_real3_4d( r )
line 1155: subroutine genrand_real3_5d( r )
line 1170: subroutine genrand_real3_6d( r )
line 1185: subroutine genrand_real3_7d( r )
line 1201: subroutine genrand_res53_0d( r )
line 1218: subroutine genrand_res53_1d( r )
line 1233: subroutine genrand_res53_2d( r )
line 1248: subroutine genrand_res53_3d( r )
line 1263: subroutine genrand_res53_4d( r )
line 1278: subroutine genrand_res53_5d( r )
line 1293: subroutine genrand_res53_6d( r )
line 1308: subroutine genrand_res53_7d( r )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 1 check(s) failed.
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/wangara.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 104 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 105 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/mpace_a.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 272 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 273 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module prescribe_forcings_module
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/prescribe_forcings.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 299 : 104 chars : !$acc enter data create( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 465 : 118 chars : !$acc update device( wm_zt, wm_zm, thlm_forcing, rtm_forcing, um_ref, vm_ref, sclrm_forcing, edsclrm_forcing )
line 867 : 105 chars : call stat_update_var_pt( stats_metadata%ish, 1, wpthlp_sfc(i)*rho_zm(i,1)*Cp,& ! intent(in)
line 870 : 105 chars : call stat_update_var_pt( stats_metadata%ilh, 1, wprtp_sfc(i)*rho_zm(i,1)*Lv, & ! intent(in)
line 873 : 103 chars : call stat_update_var_pt( stats_metadata%iwpthlp_sfc, 1, wpthlp_sfc(i), & ! intent(in)
line 876 : 103 chars : call stat_update_var_pt( stats_metadata%iwprtp_sfc, 1, wprtp_sfc(i), & ! intent(in)
line 879 : 103 chars : call stat_update_var_pt( stats_metadata%iupwp_sfc, 1, upwp_sfc(i), & ! intent(in)
line 882 : 103 chars : call stat_update_var_pt( stats_metadata%ivpwp_sfc, 1, vpwp_sfc(i), & ! intent(in)
line 885 : 102 chars : call stat_update_var_pt( stats_metadata%iustar, 1, ustar(i), & ! intent(in)
line 888 : 103 chars : call stat_update_var_pt( stats_metadata%iT_sfc, 1, T_sfc(i), & ! intent(in)
line 894 : 103 chars : !$acc exit data delete( um_bot, vm_bot, rtm_bot, thlm_bot, rho_bot, exner_bot, z_bot, ustar, ubar )
line 1097 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1101 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1105 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1106 : 112 chars : exner_zm(i,km1), exner_zm(i,k00), exner_zm(i,kp1), exner_zm(i,kp2) )
line 1109 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1110 : 108 chars : thlm_zm(i,km1), thlm_zm(i,k00), thlm_zm(i,kp1), thlm_zm(i,kp2) )
line 1113 : 101 chars : gr%zm(i,km1), gr%zm(i,k00), gr%zm(i,kp1), gr%zm(i,kp2), &
line 1114 : 104 chars : rtm_zm(i,km1), rtm_zm(i,k00), rtm_zm(i,kp1), rtm_zm(i,kp2) )
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/rico.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 159 : 103 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 160 : 102 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/dycoms2_rf02.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 121 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 122 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/bomex.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 127 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 128 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/dycoms2_rf01.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 91 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 92 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/gabls2.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 152 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 153 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/mpace_b.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 157 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 158 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/Benchmark_cases/lba.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 96 : 105 chars : if ( sclr_idx%iiedsclr_thl > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_thl) = thlm_forcing(i,k)
line 97 : 104 chars : if ( sclr_idx%iiedsclr_rt > 0 ) edsclrm_forcing(i,k,sclr_idx%iiedsclr_rt) = rtm_forcing(i,k)
line 176 : 101 chars : wpthlp_sfc(i) = convert_sens_ht_to_km_s( ( 270._core_rknd * ft**1.5_core_rknd ), rho_sfc(i) )
line 177 : 101 chars : wprtp_sfc(i) = convert_latent_ht_to_m_s( ( 554._core_rknd * ft**1.3_core_rknd ), rho_sfc(i) )
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 11 check(s) failed.
No matches for /home/jenkins/workspace/clubb_cmake_test/src/KK_microphys/
CLUBBStandardsCheck.py has begun.
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/pdf_parameter_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 538 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 1: module rev_direction_grid_test
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/rev_direction_grid_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 233 : 113 chars : !seed used = -1102123834 1480475276 -248259584 525496705 1614213535 -1267052688 6290033 -78466652
line 234 : 127 chars : !seed_output = (/ -1102123834, 1480475276, -248259584, 525496705, 1614213535, -1267052688, 6290033, -78466652 /)
line 750 : 101 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 754 : 104 chars : call xpyp_term_ta_pdf_lhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
line 795 : 101 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_ascending%nzm, gr_ascending%nzt, 1, gr_ascending, & ! In
line 801 : 104 chars : call xpyp_term_ta_pdf_rhs_godunov( gr_descending%nzm, gr_descending%nzt, 1, gr_descending, & ! In
----------------------------------------------------------------------------------------------------
--------------------- Default Private Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Missing default 'private' in the following modules:
line 19: module fill_holes_tests
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/fill_holes_tests.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 162 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 180 : 110 chars : if ( l_print_name ) print *, "filling holes of: easy_fill_test_"//trim(fill_type_names(fill_type))
line 195 : 121 chars : write(*,'(A6,I5,1X,I5,A4,E30.20,A3,E30.20)') "field(", i, k, ") = ", field(i,k), " < ", threshold
line 241 : 118 chars : if ( l_print_name ) print *, "filling holes of: reverse_easy_fill_test_"//trim(fill_type_names(fill_type))
line 344 : 102 chars : field_initial(i,k) = 10_core_rknd * ( sin( 8.0 * pi * ( k + i ) / nz ) + one ) &
line 363 : 113 chars : if ( l_print_name ) print *, "filling holes of: below_thresh_test_"//trim(fill_type_names(fill_type))
line 385 : 103 chars : print *, "-- error", two * abs( initial_mass - new_mass ) / ( initial_mass + new_mass )
line 419 : 121 chars : if ( l_print_name ) print *, "filling holes of: reverse_below_thresh_test_"//trim(fill_type_names(fill_type))
line 430 : 116 chars : print *, "ERROR in below_thresh_test REVERSE MODE: method was not conservative in grid reverse mode"
----------------------------------------------------------------------------------------------------
--------------------- Line Length Check: /home/jenkins/workspace/clubb_cmake_test/src/G_unit_test_types/spurious_source_test.F90 ---------------------
WARNING: Lines exceed 100 characters (limit 100):
line 501 : 104 chars : l_prescribed_avg_deltaz, & ! used in calc_derrived_params_api. If .true., avg_deltaz = deltaz
----------------------------------------------------------------------------------------------------
CLUBBStandardsCheck.py has finished.
FAIL: 6 check(s) failed.
[91m===============================================================
[91mCLUBBStandardsCheck FAILED
[91m THIS IS PRINTED IN ALL RED, CAPITAL LETTERS, AND USES
[91m AN EXCLAMATION MARK TO ENSURE THE DEVELOPERS FEEL SHAME!
[91m IF YOU ARE ONE OF THESE "DEVELOPERS" CHECK THE
[91m LOG FILE FOR DETAILS: /home/jenkins/workspace/clubb_cmake_test/build/ifx_PRECdouble/cmake_build_output.txt
[91m===============================================================[0m
[93mBuild completed successfully, but some source code checks have failed.[0m
Running CMake ctests
Test project /home/jenkins/workspace/clubb_cmake_test/build/ifx_PRECdouble
Start 1: _init_output_dir
1/11 Test #1: _init_output_dir ................. Passed 0.05 sec
Start 2: bomex_100iter
2/11 Test #2: bomex_100iter .................... Passed 0.88 sec
Start 3: wangara_100iter
3/11 Test #3: wangara_100iter .................. Passed 0.83 sec
Start 4: fire_100iter
4/11 Test #4: fire_100iter ..................... Passed 0.84 sec
Start 5: atex_100iter
5/11 Test #5: atex_100iter ..................... Passed 1.11 sec
Start 6: rico_silhs_100iter
6/11 Test #6: rico_silhs_100iter ............... Passed 1.03 sec
Start 7: arm_97_50iter
7/11 Test #7: arm_97_50iter .................... Passed 0.99 sec
Start 8: cobra_100iter
8/11 Test #8: cobra_100iter .................... Passed 1.05 sec
Start 9: arm_r8029_100iter
9/11 Test #9: arm_r8029_100iter ................ Passed 1.03 sec
Start 10: arm_100iter_8col
10/11 Test #10: arm_100iter_8col ................. Passed 0.76 sec
Start 11: arm_1000iter_5dt
11/11 Test #11: arm_1000iter_5dt ................. Passed 1.59 sec
100% tests passed, 0 tests failed out of 11
Total Test time (real) = 10.17 sec
[92mAll tests passed.[0m
![[Jenkins]](/jenkins/static/9cc35da4/images/svgs/logo.svg){kind=logo}
