Skipping 300 KB..
Full LogTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTestTest
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1180 : !$acc upwp_sfc_pert_col, vpwp_sfc_pert_col, rtm_ref_col, thlm_ref_col, um_ref_col, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1182 : !$acc copy( um_col, upwp_col, vm_col, vpwp_col, up2_col, vp2_col, up3_col, vp3_col, rtm_col, wprtp_col, thlm_col, wpthlp_col, rtp2_col, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1185 : !$acc rtpthvp_col, thlpthvp_col, wp2rtp_col, wp2thlp_col, uprcp_col, vprcp_col, rc_coef_zm_col, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1186 : !$acc wp4_col, wpup2_col, wpvp2_col, wp2up2_col, wp2vp2_col, ice_supersat_frac_col, um_pert_col, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1235 : !$acc copyout( rcm_in_layer_col, cloud_cover_col, wprcp_col, w_up_in_cloud_col, w_down_in_cloud_col, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1236 : !$acc cloudy_updraft_frac_col, cloudy_downdraft_frac_col, invrs_tau_zm_col, Kh_zt_col, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1242 : !$acc copy( sclrm_col, wpsclrp_col, sclrp2_col, sclrp3_col, sclrprtp_col, sclrpthlp_col, sclrpthvp_col )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/clubb_api_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
462 : esat(i,k) = 10._core_rknd**(-7.90298_core_rknd*(373.16_core_rknd/T_in_K_clipped-1._core_rknd)+ &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1392 : *(MAX( rtm - sat_mixrat_liq(p_in_Pa,theta*exner, saturation_formula), zero_threshold ))
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/saturation.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
516 : wstar = ( one/T0 * grav * wpthlp(i,1) * 0.2_core_rknd * depth_pos_wpthlp(i) )**(one_third)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/sfc_varnce_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
8 : ! easier for the clubb_tuner code to use the clubb_params vector without "knowing" any information
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/parameters_tunable.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
127 : call stat_assign( var_index=stats_metadata%icc, var_name="cc", var_description="cc, Cloud cover", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
344 : call stat_assign( var_index=stats_metadata%iwp23_matrix_condt_num, var_name="wp23_matrix_condt_num", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
351 : call stat_assign( var_index=stats_metadata%ithlm_matrix_condt_num, var_name="thlm_matrix_condt_num", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
360 : call stat_assign( var_index=stats_metadata%irtm_matrix_condt_num, var_name="rtm_matrix_condt_num", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
369 : call stat_assign( var_index=stats_metadata%ithlp2_matrix_condt_num, var_name="thlp2_matrix_condt_num", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
377 : call stat_assign( var_index=stats_metadata%irtp2_matrix_condt_num, var_name="rtp2_matrix_condt_num", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
403 : call stat_assign( var_index=stats_metadata%iwindm_matrix_condt_num, var_name="windm_matrix_condt_num", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
437 : call stat_assign( var_index=stats_metadata%itot_vartn_normlzd_rtm, var_name="tot_vartn_normlzd_rtm", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
445 : call stat_assign( var_index=stats_metadata%itot_vartn_normlzd_thlm, var_name="tot_vartn_normlzd_thlm", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
453 : call stat_assign( var_index=stats_metadata%itot_vartn_normlzd_wprtp, var_name="tot_vartn_normlzd_wprtp", &
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/stats_sfc_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
43 : ! lower(k)*upper(k-1)+l_diag(k)*1 = lhs( 0,k) => l_diag(k) = lhs( 0,k) - lower(k)*upper(k-1)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
205 : lower_diag_invrs(i,ndim) = 1.0_core_rknd / ( lhs(0,i,ndim) - lhs(1,i,ndim) * upper(i,ndim-1) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
292 : lower_diag_invrs(i,ndim) = 1.0_core_rknd / ( lhs(0,i,ndim) - lhs(1,i,ndim) * upper(i,ndim-1) )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/tridiag_lu_solver.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
177 : call stat_assign( var_index=stats_metadata%ilh_thlm_mc, var_name="lh_thlm_mc", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
306 : call stat_assign( var_index=stats_metadata%ilh_rcm_avg, var_name="lh_rcm_avg", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
459 : call stat_assign( var_index=stats_metadata%ilh_cloud_frac, var_name="lh_cloud_frac", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
513 : call stat_assign( var_index=stats_metadata%ilh_Ncnp2_zt, var_name="lh_Ncnp2_zt", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
522 : call stat_assign( var_index=stats_metadata%ilh_Ncp2_zt, var_name="lh_Ncp2_zt", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
531 : call stat_assign( var_index=stats_metadata%ilh_Nrp2_zt, var_name="lh_Nrp2_zt", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
540 : call stat_assign( var_index=stats_metadata%ilh_rcp2_zt, var_name="lh_rcp2_zt", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
549 : call stat_assign( var_index=stats_metadata%ilh_rtp2_zt, var_name="lh_rtp2_zt", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
558 : call stat_assign( var_index=stats_metadata%ilh_thlp2_zt, var_name="lh_thlp2_zt", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
567 : call stat_assign( var_index=stats_metadata%ilh_rrp2_zt, var_name="lh_rrp2_zt", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
576 : call stat_assign( var_index=stats_metadata%ilh_rrm_auto, var_name="lh_rrm_auto", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
585 : call stat_assign( var_index=stats_metadata%ilh_rrm_accr, var_name="lh_rrm_accr", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
593 : call stat_assign( var_index=stats_metadata%ilh_rrm_evap, var_name="lh_rrm_evap", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
602 : call stat_assign( var_index=stats_metadata%ilh_Nrm_auto, var_name="lh_Nrm_auto", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
611 : call stat_assign( var_index=stats_metadata%ilh_Nrm_evap, var_name="lh_Nrm_evap", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
620 : call stat_assign( var_index=stats_metadata%ilh_rrm_src_adj, var_name="lh_rrm_src_adj", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
629 : call stat_assign( var_index=stats_metadata%ilh_rrm_evap_adj, var_name="lh_rrm_evap_adj", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
638 : call stat_assign( var_index=stats_metadata%ilh_Nrm_src_adj, var_name="lh_Nrm_src_adj", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
648 : call stat_assign( var_index=stats_metadata%ilh_Nrm_evap_adj, var_name="lh_Nrm_evap_adj", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
658 : call stat_assign( var_index=stats_metadata%ilh_precip_frac, var_name="lh_precip_frac", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
677 : call stat_assign( var_index=stats_metadata%ilh_mixt_frac, var_name="lh_mixt_frac", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
697 : call stat_assign( var_index=stats_metadata%ilh_m_vol_rad_rain, var_name="lh_m_vol_rad_rain", & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
705 : call stat_assign( var_index=stats_metadata%ilh_rrm_mc_nonadj, var_name="lh_rrm_mc_nonadj", & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
717 : call stat_assign( var_index=stats_metadata%isilhs_variance_category(icategory), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
733 : call stat_assign( var_index=stats_metadata%ilh_samp_frac_category(icategory), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/stats_lh_zt_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
385 : call stat_update_var_pt( stats_metadata%iprecip_frac_tol, 1, precip_frac_tol(j), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
395 : call precip_frac_assert_check( nz, hydromet_dim, hydromet_tol, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
397 : precip_frac_1(j,:), precip_frac_2(j,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
398 : precip_frac_tol(j) ) ! intent(in)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/precipitation_fraction.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
617 : call stat_update_var( stats_metadata%icoef_wp4_implicit, coef_wp4_implicit(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1403 : call stat_update_var_pt( stats_metadata%iwp23_matrix_condt_num, 1, one / rcond(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1494 : call stat_end_update_pt( stats_metadata%iwp2_dp1, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1541 : call stat_end_update_pt( stats_metadata%iwp2_pr1, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1603 : call stat_end_update_pt( stats_metadata%iwp3_ta, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1616 : call stat_end_update_pt( stats_metadata%iwp3_tp, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1622 : call stat_end_update_pt( stats_metadata%iwp3_pr_tp, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2686 : call stat_update_var_pt( stats_metadata%iwp2_pr_dfsn, k, rhs_pr_dfsn_wp2(i,k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2691 : call stat_update_var_pt( stats_metadata%iwp2_splat, k, - lhs_splat_wp2(i,k) * wp2(i,k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2707 : call stat_modify_pt( stats_metadata%iwp2_pr1, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2790 : call stat_begin_update_pt( stats_metadata%iwp3_ta, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2805 : call stat_begin_update_pt( stats_metadata%iwp3_tp, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2811 : call stat_begin_update_pt( stats_metadata%iwp3_pr_tp, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2855 : call stat_update_var_pt( stats_metadata%iwp3_splat, k, - lhs_splat_wp3(i,k) * wp3(i,k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2866 : call stat_begin_update_pt( stats_metadata%iwp3_dp1, k, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2885 : call stat_update_var_pt( stats_metadata%iwp3_pr_turb, k, rhs_pr_turb_wp3(i,k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2887 : call stat_update_var_pt( stats_metadata%iwp3_pr_dfsn, k, rhs_pr_dfsn_wp3(i,k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/advance_wp2_wp3_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
231 : real( kind = core_rknd ), dimension(ngrdcol, nz, min(1,sclr_dim), 2 ), intent(in) :: & ! h1g, 2010-06-15
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
577 : wm(i,:), rtm(i,:), thlm(i,:), wp2(i,:), rtp2(i,:), thlp2(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
578 : Skw(i,:), Skrt(i,:), Skthl(i,:), wprtp(i,:), wpthlp(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
605 : wm(i,:), rtm(i,:), thlm(i,:), wp2(i,:), rtp2(i,:), thlp2(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
606 : Skw(i,:), Skrt(i,:), Skthl(i,:), wprtp(i,:), wpthlp(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
617 : call LY93_driver( nz, wm(i,:), rtm(i,:), thlm(i,:), wp2(i,:), rtp2(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
618 : thlp2(i,:), Skw(i,:), Skrt(i,:), Skthl(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
973 : pdf_params%rsatl_1(i,:) = sat_mixrat_ice( nz, p_in_Pa(i,:), tl1(i,:) ) * RH_crit(i, :, 1, 1)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
988 : pdf_params%rsatl_2(i,:) = sat_mixrat_ice( nz, p_in_Pa(i,:), tl2(i,:) ) * RH_crit(i, :, 1, 2)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1011 : rsatl_2 = sat_mixrat_liq( nz, ngrdcol, p_in_Pa, tl2, saturation_formula ) ! h1g, 2010-06-16 end mod
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1117 : rcm(i,k) = pdf_params%mixt_frac(i,k) * pdf_params%rc_1(i,k) + ( one - pdf_params%mixt_frac(i,k) ) &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1292 : = pdf_params%mixt_frac(i,k) * ( ( sclr1(i,k,j) - sclrm(i,k,j) ) * pdf_params%rc_1(i,k) ) &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1298 : + ( one - pdf_params%mixt_frac(i,k) ) * corr_sclr_rt_2(i,k,j) * pdf_params%crt_2(i,k) &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1304 : - ( one - pdf_params%mixt_frac(i,k) ) * corr_sclr_thl_2(i,k,j) * pdf_params%cthl_2(i,k) &
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/pdf_closure_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
845 : !$acc rc_coef, Km_zm, Kmh_zm, gamma_Skw_fnc, sigma_sqd_w, sigma_sqd_w_tmp, sigma_sqd_w_zt, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
928 : thlm_forcing(i,:), rtm_forcing(i,:), um_forcing(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
929 : vm_forcing(i,:), wm_zm(i,:), wm_zt(i,:), p_in_Pa(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
930 : rho_zm(i,:), rho(i,:), exner(i,:), rho_ds_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
931 : rho_ds_zt(i,:), invrs_rho_ds_zm(i,:), invrs_rho_ds_zt(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
932 : thv_ds_zm(i,:), thv_ds_zt(i,:), wpthlp_sfc(i), wprtp_sfc(i), upwp_sfc(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
933 : vpwp_sfc(i), um(i,:), upwp(i,:), vm(i,:), vpwp(i,:), up2(i,:), vp2(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
934 : rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), wp2(i,:), wp3(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
935 : rtp2(i,:), thlp2(i,:), rtpthlp(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
938 : wpsclrp_sfc(i,:), wpedsclrp_sfc(i,:), sclrm(i,:,:), wpsclrp(i,:,:), sclrp2(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
939 : sclrprtp(i,:,:), sclrpthlp(i,:,:), sclrm_forcing(i,:,:), edsclrm(i,:,:), edsclrm_forcing(i,:,:) ) ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1361 : mu, rtp2_zt, thlp2_zt, rtpthlp_zt, pdf_params, em, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1566 : ! Added an extra check for stats_metadata%irel_humidity > 0; otherwise, if both stats_metadata%irsat = 0 and
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1567 : ! stats_metadata%irel_humidity = 0, rsat is not computed, leading to a floating-point exception
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1579 : call stat_update_var( stats_metadata%irel_humidity, rel_humidity(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1628 : call stat_update_var( stats_metadata%istability_correction, stability_correction(i,:), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1709 : call stat_update_var(stats_metadata%iinvrs_tau_wpxp_zm, invrs_tau_wpxp_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1713 : call stat_update_var(stats_metadata%iinvrs_tau_wp3_zm, invrs_tau_wp3_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1717 : call stat_update_var(stats_metadata%iinvrs_tau_no_N2_zm, invrs_tau_no_N2_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1726 : call stat_update_var(stats_metadata%ibrunt_vaisala_freq_sqd, brunt_vaisala_freq_sqd(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1728 : call stat_update_var(stats_metadata%ibrunt_vaisala_freq_sqd_splat, brunt_vaisala_freq_sqd_splat(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1730 : call stat_update_var(stats_metadata%ibrunt_vaisala_freq_sqd_mixed, brunt_vaisala_freq_sqd_mixed(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1732 : call stat_update_var(stats_metadata%ibrunt_vaisala_freq_sqd_moist, brunt_vaisala_freq_sqd_moist(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1734 : call stat_update_var(stats_metadata%ibrunt_vaisala_freq_sqd_dry, brunt_vaisala_freq_sqd_dry(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1753 : clubb_config_flags%l_modify_limiters_for_cnvg_test, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1755 : stats_zm, & ! intent(inout)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1847 : sclrm(i,:,:), sclrm_trsport_only(i,:,:), & ! intent(inout)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2210 : * ( one - exp( brunt_vaisala_freq_sqd_zt(i,k) / clubb_params(i,ixp3_coef_slope) ) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2606 : thlm(i,:), rtm(i,:), wprtp(i,:), wpthlp(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2607 : wp2(i,:), wp3(i,:), rtp2(i,:), rtp3(i,:), thlp2(i,:), thlp3(i,:), rtpthlp(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2608 : wpthvp(i,:), wp2thvp(i,:), rtpthvp(i,:), thlpthvp(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2609 : p_in_Pa(i,:), exner(i,:), rho(i,:), rho_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2610 : rho_ds_zm(i,:), rho_ds_zt(i,:), thv_ds_zm(i,:), thv_ds_zt(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2611 : wm_zt(i,:), wm_zm(i,:), rcm(i,:), wprcp(i,:), rc_coef(i,:), rc_coef_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2612 : rcm_zm(i,:), rtm_zm(i,:), thlm_zm(i,:), cloud_frac(i,:), ice_supersat_frac(i,:),& ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2615 : thvm(i,:), ug(i,:), vg(i,:), Lscale(i,:), wpthlp2(i,:), wp2thlp(i,:), wprtp2(i,:), wp2rtp(i,:),& ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2616 : Lscale_up(i,:), Lscale_down(i,:), tau_zt(i,:), Kh_zt(i,:), wp2rcp(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2617 : wprtpthlp(i,:), sigma_sqd_w_zt(i,:), rsat(i,:), wp2_zt(i,:), thlp2_zt(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2618 : wpthlp_zt(i,:), wprtp_zt(i,:), rtp2_zt(i,:), rtpthlp_zt(i,:), up2_zt(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2619 : vp2_zt(i,:), upwp_zt(i,:), vpwp_zt(i,:), wpup2(i,:), wpvp2(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2622 : rtprcp(i,:), rcp2(i,:), em(i,:), a3_coef(i,:), a3_coef_zt(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2623 : wp3_zm(i,:), wp3_on_wp2(i,:), wp3_on_wp2_zt(i,:), Skw_velocity(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2626 : pdf_params_single_col(i), pdf_params_zm_single_col(i), sclrm(i,:,:), sclrp2(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2627 : sclrprtp(i,:,:), sclrpthlp(i,:,:), sclrm_forcing(i,:,:), sclrpthvp(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2628 : wpsclrp(i,:,:), sclrprcp(i,:,:), wp2sclrp(i,:,:), wpsclrp2(i,:,:), wpsclrprtp(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2629 : wpsclrpthlp(i,:,:), wpedsclrp(i,:,:), edsclrm(i,:,:), edsclrm_forcing(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2630 : clubb_config_flags%saturation_formula, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2631 : stats_metadata, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2632 : stats_zt(i), stats_zm(i), stats_sfc(i) ) ! intent(inout)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2654 : thlm_forcing(i,:), rtm_forcing(i,:), um_forcing(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2655 : vm_forcing(i,:), wm_zm(i,:), wm_zt(i,:), p_in_Pa(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2656 : rho_zm(i,:), rho(i,:), exner(i,:), rho_ds_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2657 : rho_ds_zt(i,:), invrs_rho_ds_zm(i,:), invrs_rho_ds_zt(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2658 : thv_ds_zm(i,:), thv_ds_zt(i,:), wpthlp_sfc(i), wprtp_sfc(i), upwp_sfc(i), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2659 : vpwp_sfc(i), um(i,:), upwp(i,:), vm(i,:), vpwp(i,:), up2(i,:), vp2(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2660 : rtm(i,:), wprtp(i,:), thlm(i,:), wpthlp(i,:), wp2(i,:), wp3(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2661 : rtp2(i,:), thlp2(i,:), rtpthlp(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2664 : wpsclrp_sfc(i,:), wpedsclrp_sfc(i,:), sclrm(i,:,:), wpsclrp(i,:,:), sclrp2(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2665 : sclrprtp(i,:,:), sclrpthlp(i,:,:), sclrm_forcing(i,:,:), edsclrm(i,:,:), edsclrm_forcing(i,:,:) ) ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2763 : !$acc sqrt_em_zt, xp3_coef_fnc, w_1_zm, w_2_zm, varnce_w_1_zm, varnce_w_2_zm, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2768 : !$acc invrs_tau_C4_zm, invrs_tau_C14_zm, invrs_tau_wp2_zm, invrs_tau_wpxp_zm, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2769 : !$acc invrs_tau_wp3_zm, invrs_tau_no_N2_zm, invrs_tau_bkgnd, invrs_tau_shear, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3309 : sclrp2_zt(:,:,j) = zm2zt( nz, ngrdcol, gr, sclrp2(:,:,j), sclr_tol(j)**2 ) ! Pos. def. quantity
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3448 : sigma_sqd_w(:,:) = zm2zt2zm( nz, ngrdcol, gr, sigma_sqd_w_tmp(:,:), zero_threshold ) ! Pos. def. quantity
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3452 : sigma_sqd_w_zt(:,:) = zm2zt( nz, ngrdcol, gr, sigma_sqd_w(:,:), zero_threshold ) ! Pos. def. quantity
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3488 : sclrp2_zt(:,:,j) = zm2zt( nz, ngrdcol, gr, sclrp2(:,:,j), sclr_tol(j)**2 ) ! Pos. def. quantity
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4070 : write(fstderr,*) "l_stability_correct_tau_zm = ", clubb_config_flags%l_stability_correct_tau_zm
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4106 : write(fstderr,*) "Unknown type of double Gaussian PDF selected: ", clubb_config_flags%iiPDF_type
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/advance_clubb_core_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
725 : time_current+real(stats_metadata%stats_tout,kind=time_precision), & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
830 : time_current+real(stats_metadata%stats_tout,kind=time_precision), & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
838 : time_current, stats_metadata%stats_tout, stats_lh_zt%num_output_fields, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
912 : time_current+real(stats_metadata%stats_tout,kind=time_precision), & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
920 : time_current, stats_metadata%stats_tout, stats_lh_sfc%num_output_fields, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1149 : time_current+real(stats_metadata%stats_tout,kind=time_precision), & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1232 : time_current+real(stats_metadata%stats_tout, kind=time_precision), & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1316 : time_current+real(stats_metadata%stats_tout,kind=time_precision), & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1405 : time_current+real(stats_metadata%stats_tout,kind=time_precision), & !intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1413 : time_current, stats_metadata%stats_tout, stats_sfc%num_output_fields, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2067 : integer :: grid_level = 1 ! grid level for stats where there is only one sensible level (eg timeseries)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2203 : call stat_update_var( stats_metadata%ivarnce_thl_1, pdf_params%varnce_thl_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2205 : call stat_update_var( stats_metadata%ivarnce_thl_2, pdf_params%varnce_thl_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2223 : call stat_update_var( stats_metadata%icloud_frac_1, pdf_params%cloud_frac_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2225 : call stat_update_var( stats_metadata%icloud_frac_2, pdf_params%cloud_frac_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2239 : call stat_update_var( stats_metadata%icovar_chi_eta_1, pdf_params%covar_chi_eta_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2241 : call stat_update_var( stats_metadata%icovar_chi_eta_2, pdf_params%covar_chi_eta_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2243 : call stat_update_var( stats_metadata%icorr_w_chi_1, pdf_params%corr_w_chi_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2245 : call stat_update_var( stats_metadata%icorr_w_chi_2, pdf_params%corr_w_chi_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2247 : call stat_update_var( stats_metadata%icorr_w_eta_1, pdf_params%corr_w_eta_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2249 : call stat_update_var( stats_metadata%icorr_w_eta_2, pdf_params%corr_w_eta_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2251 : call stat_update_var( stats_metadata%icorr_chi_eta_1, pdf_params%corr_chi_eta_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2253 : call stat_update_var( stats_metadata%icorr_chi_eta_2, pdf_params%corr_chi_eta_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2259 : call stat_update_var( stats_metadata%icorr_w_thl_1, pdf_params%corr_w_thl_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2261 : call stat_update_var( stats_metadata%icorr_w_thl_2, pdf_params%corr_w_thl_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2263 : call stat_update_var( stats_metadata%icorr_rt_thl_1, pdf_params%corr_rt_thl_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2265 : call stat_update_var( stats_metadata%icorr_rt_thl_2, pdf_params%corr_rt_thl_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2325 : call stat_update_var( stats_metadata%isclrm_f(isclr), sclrm_forcing(:,isclr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2334 : call stat_update_var( stats_metadata%iedsclrm_f(isclr), edsclrm_forcing(:,isclr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2417 : call stat_update_var( stats_metadata%iwp3_on_wp2_cfl_num, wp3_on_wp2 * dt / dzm, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2422 : call stat_update_var( stats_metadata%iice_supersat_frac_zm, ice_supersat_frac_zm, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2434 : call stat_update_var( stats_metadata%ivarnce_w_1_zm, pdf_params_zm%varnce_w_1(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2436 : call stat_update_var( stats_metadata%ivarnce_w_2_zm, pdf_params_zm%varnce_w_2(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2438 : call stat_update_var( stats_metadata%imixt_frac_zm, pdf_params_zm%mixt_frac(1,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2459 : call stat_update_var( stats_metadata%iwpsclrprtp(isclr), wpsclrprtp(:,isclr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2461 : call stat_update_var( stats_metadata%iwpsclrpthlp(isclr), wpsclrpthlp(:,isclr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2486 : call stat_update_var_pt( stats_metadata%icc, grid_level, maxval( cloud_frac(1:nz) ), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2510 : call stat_update_var_pt( stats_metadata%iz_cloud_base, grid_level, -10.0_core_rknd , & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2621 : call stat_update_var_pt( stats_metadata%itot_vartn_normlzd_rtm, grid_level, xtmp, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2627 : write(fstderr, *) "Warning: tot_vartn_normlzd_thlm tried to divide by zero denominator ", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2634 : call stat_update_var_pt( stats_metadata%itot_vartn_normlzd_thlm, grid_level, xtmp, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2640 : write(fstderr, *) "Warning: tot_vartn_normlzd_wprtp tried to divide by zero denominator ", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2647 : call stat_update_var_pt( stats_metadata%itot_vartn_normlzd_wprtp, grid_level, xtmp, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2893 : call stat_update_var( stats_metadata%ilh_rrm_mc, lh_hydromet_mc(:,hm_metadata%iirr), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/stats_clubb_utilities.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
499 : write(fstderr,*) "l_mono_flux_lim_rtm=T with l_mono_flux_lim_spikefix=F can lead to spikes aloft."
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
824 : call solve_xm_wpxp_with_single_lhs( nz, ngrdcol, sclr_dim, sclr_tol, gr, dt, l_iter, nrhs, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
923 : dt, sigma_sqd_w(i,:), wm_zm(i,:), wm_zt(i,:), wp2(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
924 : Lscale_zm(i,:), wp3_on_wp2(i,:), wp3_on_wp2_zt(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
925 : Kh_zt(i,:), Kh_zm(i,:), invrs_tau_C6_zm(i,:), Skw_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
929 : wpthlp_forcing(i,:), thlm_ref(i,:), rho_ds_zm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
935 : wp2sclrp(i,:,:), sclrpthvp(i,:,:), sclrm_forcing(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
936 : sclrp2(i,:,:), exner(i,:), rcm(i,:), p_in_Pa(i,:), thvm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
939 : um_forcing(i,:), vm_forcing(i,:), ug(i,:), vg(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
940 : wpthvp(i,:), fcor(i), um_ref(i,:), vm_ref(i,:), up2(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
941 : vp2(i,:), uprcp(i,:), vprcp(i,:), rc_coef_zm(i,:), rtm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
942 : wprtp(i,:), thlm(i,:), wpthlp(i,:), sclrm(i,:,:), wpsclrp(i,:,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
943 : um(i,:), upwp(i,:), vm(i,:), vpwp(i,:), rtm_old(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
945 : sclrm_old(i,:,:), wpsclrp_old(i,:,:), um_old(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3012 : call xm_wpxp_rhs( nz, ngrdcol, xm_wpxp_scalar, l_iter, dt, sclrm(:,:,j), wpsclrp(:,:,j), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3127 : call stat_update_var( stats_metadata%iupwp_pr4, C_uu_shr(i) * wp2(i,:) * ddzt_um(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3129 : call stat_update_var( stats_metadata%ivpwp_pr4, C_uu_shr(i) * wp2(i,:) * ddzt_vm(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3326 : if ( stats_metadata%l_stats_samp .and. stats_metadata%ithlm_matrix_condt_num + stats_metadata%irtm_matrix_condt_num > 0 ) then
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4137 : call xm_wpxp_rhs( nz, ngrdcol, xm_wpxp_scalar, l_iter, dt, sclrm(:,:,j), wpsclrp(:,:,j), & ! In
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/advance_xm_wpxp_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
431 : call stat_assign( var_index=stats_metadata%iinvrs_tau_wpxp_zm, var_name="invrs_tau_wpxp_zm", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
447 : call stat_assign( var_index=stats_metadata%iinvrs_tau_no_N2_zm, var_name="invrs_tau_no_N2_zm", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2086 : call stat_assign( var_index=stats_metadata%iice_supersat_frac_zm, var_name="ice_supersat_frac_zm", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2210 : call stat_assign( var_index=stats_metadata%ibrunt_vaisala_freq_sqd, var_name="bv_freq_sqd", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2218 : call stat_assign( var_index=stats_metadata%ibrunt_vaisala_freq_sqd_splat, var_name="bv_freq_sqd_splat", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2226 : call stat_assign( var_index=stats_metadata%ibrunt_vaisala_freq_sqd_mixed, var_name="bv_freq_sqd_mixed", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2234 : call stat_assign( var_index=stats_metadata%ibrunt_vaisala_freq_sqd_moist, var_name="bv_freq_sqd_moist", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2242 : call stat_assign( var_index=stats_metadata%ibrunt_vaisala_freq_sqd_dry, var_name="bv_freq_sqd_dry", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2250 : call stat_assign( var_index=stats_metadata%ibrunt_vaisala_freq_sqd_smth, var_name="bv_freq_sqd_smth", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2258 : call stat_assign( var_index=stats_metadata%ibrunt_freq_out_cloud, var_name="bv_freq_out_cloud", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2302 : call stat_assign( var_index=stats_metadata%iwp3_on_wp2_cfl_num, var_name="wp3_on_wp2_cfl_num", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2330 : call stat_assign( var_index=stats_metadata%istability_correction, var_name="stability_correction", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2384 : call stat_assign( var_index=stats_metadata%isclrprtp(j), var_name="sclr"//trim(sclr_idx)//"prtp", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2395 : call stat_assign( var_index=stats_metadata%isclrp2(j), var_name="sclr"//trim(sclr_idx)//"p2", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2406 : call stat_assign( var_index=stats_metadata%isclrpthvp(j), var_name="sclr"//trim(sclr_idx)//"pthvp", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2417 : call stat_assign( var_index=stats_metadata%isclrpthlp(j), var_name="sclr"//trim(sclr_idx)//"pthlp", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2428 : call stat_assign( var_index=stats_metadata%isclrprcp(j), var_name="sclr"//trim(sclr_idx)//"prcp", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2439 : call stat_assign( var_index=stats_metadata%iwpsclrp(j), var_name="wpsclr"//trim(sclr_idx)//"p", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2450 : call stat_assign( var_index=stats_metadata%iwpsclrp2(j), var_name="wpsclr"//trim(sclr_idx)//"p2", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2461 : call stat_assign( var_index=stats_metadata%iwp2sclrp(j), var_name="wp2sclr"//trim(sclr_idx)//"p", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2472 : call stat_assign( var_index=stats_metadata%iwpsclrprtp(j), var_name="wpsclr"//trim(sclr_idx)//"prtp", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2495 : call stat_assign( var_index=stats_metadata%iwpedsclrp(j), var_name="wpedsclr"//trim(sclr_idx)//"p", &
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/stats_zm_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
624 : call solve_xp2_xpyp_with_single_lhs( nz, ngrdcol, sclr_dim, sclr_tol, gr, sclr_idx, & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1327 : sclrpthlp(:,:,sclr) ) ! Intent(inout)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1857 : rhs_ta_wpsclrp2, rhs_ta_wprtpsclrp, rhs_ta_wpthlpsclrp, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2729 : real( kind = core_rknd ), dimension(ngrdcol) :: rcond ! Est. of the reciprocal of the condition # on the matrix
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2763 : ixapxbp_matrix_condt_num = max( stats_metadata%irtp2_matrix_condt_num, stats_metadata%ithlp2_matrix_condt_num, &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2783 : call stat_update_var_pt( stats_metadata%irtp2_matrix_condt_num, 1, one / rcond(i), & ! Intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2786 : call stat_update_var_pt( stats_metadata%ithlp2_matrix_condt_num, 1, one / rcond(i), & ! Intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2789 : call stat_update_var_pt( stats_metadata%irtpthlp_matrix_condt_num, 1, one / rcond(i), & ! Intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4042 : wp_coef(i,k) = ( one - one_third * beta(i) ) * a1(i,k)**2 * wp3_on_wp2(i,k) / wp2(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4043 : wp_coef_zt(i,k) = ( one - one_third * beta(i) ) * a1_zt(i,k)**2 * wp3_on_wp2_zt(i,k) / wp2_zt(i,k)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4224 : sgn_t_vel_sclrprtp(i,k) = sign(one,term_wprtpsclrp_explicit_zm(i,k)*sclrprtp(i,k,sclr))
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4258 : sgn_t_vel_sclrpthlp(i,k) = sign(one,term_wpthlpsclrp_explicit_zm(i,k)*sclrpthlp(i,k,sclr))
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4351 : invrs_rho_ds_zm, rho_ds_zm, & ! Intent(in) & ! Intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5253 : !call stat_update_var( stats_metadata%icoef_wprtp2_implicit, coef_wprtp2_implicit(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5257 : !call stat_update_var( stats_metadata%iterm_wprtp2_explicit, term_wprtp2_explicit(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5261 : !call stat_update_var( stats_metadata%icoef_wpthlp2_implicit, coef_wpthlp2_implicit(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5265 : !call stat_update_var( stats_metadata%iterm_wpthlp2_explicit, term_wpthlp2_explicit(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5269 : !call stat_update_var( stats_metadata%icoef_wprtpthlp_implicit, coef_wprtpthlp_implicit(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5273 : !call stat_update_var( stats_metadata%iterm_wprtpthlp_explicit, term_wprtpthlp_explicit(i,:), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/advance_xp2_xpyp_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
552 : call stat_assign( var_index=stats_metadata%iice_supersat_frac, var_name="ice_supersat_frac", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
784 : var_description="rt'^3, Third-order moment of total water, rt", var_units="(kg/kg)^3", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
938 : call stat_assign( var_index=stats_metadata%irho, var_name="rho", var_description="rho, Air density", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2890 : call stat_assign( var_index=stats_metadata%iw_KK_evap_covar_zt, var_name="w_KK_evap_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2898 : call stat_assign( var_index=stats_metadata%irt_KK_evap_covar_zt, var_name="rt_KK_evap_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2906 : call stat_assign( var_index=stats_metadata%ithl_KK_evap_covar_zt, var_name="thl_KK_evap_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2915 : call stat_assign( var_index=stats_metadata%iw_KK_auto_covar_zt, var_name="w_KK_auto_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2923 : call stat_assign( var_index=stats_metadata%irt_KK_auto_covar_zt, var_name="rt_KK_auto_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2931 : call stat_assign( var_index=stats_metadata%ithl_KK_auto_covar_zt, var_name="thl_KK_auto_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2940 : call stat_assign( var_index=stats_metadata%iw_KK_accr_covar_zt, var_name="w_KK_accr_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2949 : call stat_assign( var_index=stats_metadata%irt_KK_accr_covar_zt, var_name="rt_KK_accr_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2958 : call stat_assign( var_index=stats_metadata%ithl_KK_accr_covar_zt, var_name="thl_KK_accr_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2966 : call stat_assign( var_index=stats_metadata%irr_KK_mvr_covar_zt, var_name="rr_KK_mvr_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2975 : call stat_assign( var_index=stats_metadata%iNr_KK_mvr_covar_zt, var_name="Nr_KK_mvr_covar_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2984 : call stat_assign( var_index=stats_metadata%iKK_mvr_variance_zt, var_name="KK_mvr_variance_zt", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4932 : call stat_assign( var_index=stats_metadata%icloud_frac_refined, var_name="cloud_frac_refined", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4948 : call stat_assign( var_index=stats_metadata%ihl_on_Cp_residual, var_name="hl_on_Cp_residual", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4969 : call stat_assign( var_index=stats_metadata%isclrm(j), var_name="sclr"//trim(sclr_idx)//"m", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4980 : call stat_assign( var_index=stats_metadata%isclrm_f(j), var_name="sclr"//trim(sclr_idx)//"m_f", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4991 : call stat_assign( var_index=stats_metadata%iedsclrm(j), var_name="edsclr"//trim(sclr_idx)//"m", &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
5002 : call stat_assign( var_index=stats_metadata%iedsclrm_f(j), var_name="edsclr"//trim(sclr_idx)//"m_f", &
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/stats_zt_module.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
466 : = ( ( hm_metadata%hmp2_ip_on_hmm2_ip(j) + one ) / precip_fracs%precip_frac(i,k) - one ) &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
695 : call calc_corr_norm_and_cholesky_factor( nz, ngrdcol, iiPDF_type, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
696 : pdf_dim, hm_metadata, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
697 : pdf_params%rc_1, pdf_params%rc_2, & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
698 : corr_array_n_cloud, corr_array_n_below, & ! intent(out)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
699 : corr_array_1_n, corr_array_2_n, & ! intent(out)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
783 : call stat_update_var_pt( stats_metadata%ihmp2_zt(j), k, hydrometp2_zt(i,k,j), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
820 : corr_array_1_n(i,:,hm_metadata%iiPDF_chi,hm_metadata%iiPDF_eta), &
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
821 : corr_array_2_n(i,:,hm_metadata%iiPDF_chi,hm_metadata%iiPDF_eta) )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
846 : call stat_update_var_pt( stats_metadata%iprecip_frac, k, precip_fracs%precip_frac(i,k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
855 : call stat_update_var_pt( stats_metadata%iprecip_frac_1, k, precip_fracs%precip_frac_1(i,k), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
864 : call stat_update_var_pt( stats_metadata%iprecip_frac_2, k, precip_fracs%precip_frac_2(i,k), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3854 : call stat_update_var_pt( stats_metadata%imu_hm_1(hm_idx), k, mu_x_1(k,ivar), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3864 : call stat_update_var_pt( stats_metadata%imu_hm_2(hm_idx), k, mu_x_2(k,ivar), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3875 : call stat_update_var_pt( stats_metadata%imu_Ncn_1, k, mu_x_1(k,iiPDF_Ncn), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3884 : call stat_update_var_pt( stats_metadata%imu_Ncn_2, k, mu_x_2(k,iiPDF_Ncn), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3899 : call stat_update_var_pt( stats_metadata%isigma_hm_1(hm_idx), k, sigma_x_1(k,ivar), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3910 : call stat_update_var_pt( stats_metadata%isigma_hm_2(hm_idx), k, sigma_x_2(k,ivar), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3921 : call stat_update_var_pt( stats_metadata%isigma_Ncn_1, k, sigma_x_1(k,iiPDF_Ncn), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
3930 : call stat_update_var_pt( stats_metadata%isigma_Ncn_2, k, sigma_x_2(k,iiPDF_Ncn), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4257 : call stat_update_var_pt( stats_metadata%icorr_hmx_hmy_1(hm_idx_jvar,hm_idx_ivar), k, & ! in
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4269 : call stat_update_var_pt( stats_metadata%icorr_hmx_hmy_2(hm_idx_jvar,hm_idx_ivar), k, & ! in
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4394 : call stat_update_var_pt( stats_metadata%imu_hm_1_n(hm_idx), k, mu_hm_1_n(k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
4413 : call stat_update_var_pt( stats_metadata%imu_hm_2_n(hm_idx), k, mu_hm_2_n(k), & ! intent(in)
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/CLUBB_core/setup_clubb_pdf_params.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/Benchmark_cases/*.F90
CLUBBStandardsCheck.pl has begun.
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
137 : wprtp_sfc = compute_wprtp_sfc( Cq, ubar, rtm_sfc, sat_mixrat_liq( p_sfc, T_sfc, saturation_formula ) )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/cloud_feedback.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
164 : wprtp_sfc = compute_wprtp_sfc( Cd, ubar, rtm_sfc, sat_mixrat_liq( p_sfc, T_sfc, saturation_formula ) )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/dycoms2_rf01.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
99 : wprtp_sfc = compute_wprtp_sfc( Cz, ubar, rtm_sfc, sat_mixrat_liq( p_sfc, T_sfc, saturation_formula ) )
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/Benchmark_cases/fire.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has forbidden elements: .gt. .
71 : if (time.gt.80880_time_precision) then
CLUBBStandardsCheck.pl WARNING: File has forbidden elements.
../src/Benchmark_cases/neutral_case.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/KK_microphys/*.F90
CLUBBStandardsCheck.pl has begun.
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/SILHS/*.F90
CLUBBStandardsCheck.pl has begun.
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
447 : call assert_correct_cloud_normal( num_samples, X_u_all_levs(i,:,k,hm_metadata%iiPDF_chi), & ! In
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2273 : ! call stat_update_var( stats_metadata%ilh_cloud_frac_unweighted, lh_cloud_frac, stats_lh_zt )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2617 : ! call stat_update_var( stats_metadata%ilh_precip_frac_unweighted, lh_precip_frac, stats_lh_zt )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2660 : call stat_update_var_pt( stats_metadata%ik_lh_start, 1, real( k_lh_start(i), kind=core_rknd ), stats_lh_sfc )
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
2707 : ! call stat_update_var( stats_metadata%ilh_samp_frac_category(icategory), lh_samp_frac(:,icategory), &
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/SILHS/latin_hypercube_driver_module.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
perl ../utilities/CLUBBStandardsCheck.pl ../src/G_unit_test_types/*.F90
CLUBBStandardsCheck.pl has begun.
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
121 : result = smooth_min(4, 1, input, zero, min_max_smth_mag) ! Order of nz and ngrdcol is opposite to order of indexing! This is very unintuitive!
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
174 : ! Case 3: Make sure that on a large number of arbitrarily chosen points with small min_max_smth_mag,
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/G_unit_test_types/smooth_min_max_tests.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
502 : l_host_applies_sfc_fluxes ! Use to determine whether a host model has already applied the surface flux,
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/G_unit_test_types/spurious_source_test.F90
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
559 : l_host_applies_sfc_fluxes ! Use to determine whether a host model has already applied the surface flux,
CLUBBStandardsCheck.pl WARNING: Line has exceeded 100 characters.
1597 : wp2(1,:), rtp2(1,:), thlp2(1,:), up2(1,:), vp2(1,:), &! In
CLUBBStandardsCheck.pl WARNING: File has lines that exceed 100 characters.
../src/G_unit_test_types/pdf_parameter_tests.F90
--------------------------------------------------------------------------------
CLUBBStandardsCheck.pl has finished.
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Run CLUBB's G Unit Tests)
[Pipeline] sh
+ run_scripts/run_G_unit_tests.bash
Running G_unit_tests
Performing KK integrals tests
Percent Difference Tolerance (maximum acceptable percent difference between the CLUBB results and the MATLAB results using the same equations): 1.50000E-12
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 1
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: 3.940566852245361E-04
MATLAB result: 3.940566852245361E-04
Percent difference: 1.37569E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: 3.927115990964175E-04
MATLAB result: 3.927115990964175E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: 3.959157231937518E-04
MATLAB result: 3.959157231937519E-04
Percent difference: 1.36923E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: 3.961224408774507E-04
MATLAB result: 3.961224408774508E-04
Percent difference: 2.73704E-14%
Agreement with regards to integral: Trivariate NNL
Obtained result: 5.957899876478482E-10
MATLAB result: 5.957899876478559E-10
Percent difference: 1.30160E-12%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 5.299646183560589E-10
MATLAB result: 5.299646183560650E-10
Percent difference: 1.15111E-12%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 5.543555152546510E-10
MATLAB result: 5.543555152546526E-10
Percent difference: 2.98430E-13%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 5.286452253001269E-10
MATLAB result: 5.286452253001284E-10
Percent difference: 2.73826E-13%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -9.854231981928350E-04
MATLAB result: -9.854231981928350E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: -9.922448817549015E-04
MATLAB result: -9.922448817549015E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 8.940070763287882E-09
MATLAB result: 8.940070763287870E-09
Percent difference: 1.29535E-13%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 8.942709549399747E-09
MATLAB result: 8.942709549399743E-09
Percent difference: 3.69991E-14%
Agreement with regards to integral: Bivariate LL
Obtained result: 1.007487885941808E-02
MATLAB result: 1.007487885941809E-02
Percent difference: 1.03310E-13%
==================================================
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 2
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: -4.441972023148828E-05
MATLAB result: -4.441972023148829E-05
Percent difference: 3.05102E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: -4.559373570842311E-05
MATLAB result: -4.559373570842311E-05
Percent difference: 1.48623E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: -5.040842768062482E-05
MATLAB result: -5.040842768062482E-05
Percent difference: 1.34427E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: -5.038775591225493E-05
MATLAB result: -5.038775591225493E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL
Obtained result: 4.629614112194526E-09
MATLAB result: 4.629614112194527E-09
Percent difference: 1.78672E-14%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 4.604609365066508E-09
MATLAB result: 4.604609365066509E-09
Percent difference: 1.79642E-14%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 4.685272472815394E-09
MATLAB result: 4.685272472815394E-09
Percent difference: 1.76549E-14%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 4.683452323676534E-09
MATLAB result: 4.683452323676534E-09
Percent difference: 0.00000E+00%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -1.088125285831538E-04
MATLAB result: -1.088125285831538E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: -9.922448817549016E-05
MATLAB result: -9.922448817549016E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 7.907812698669825E-10
MATLAB result: 7.907812698669821E-10
Percent difference: 5.23015E-14%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 6.330953526469324E-10
MATLAB result: 6.330953526469324E-10
Percent difference: 0.00000E+00%
==================================================
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 3
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: -7.622010070476263E-05
MATLAB result: -7.622010070476262E-05
Percent difference: 1.77808E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: -7.695119321547280E-05
MATLAB result: -7.695119321547280E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: -1.000000000000000E-04
MATLAB result: -1.000000000000000E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: -1.000000000000000E-04
MATLAB result: -1.000000000000000E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL
Obtained result: 4.851589269710427E-09
MATLAB result: 4.851589269710427E-09
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 4.837259568295437E-09
MATLAB result: 4.837259568295437E-09
Percent difference: 1.71002E-14%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 5.000000000000000E-09
MATLAB result: 5.000000000000000E-09
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 5.000000000000000E-09
MATLAB result: 5.000000000000000E-09
Percent difference: 0.00000E+00%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -4.609761356905441E-05
MATLAB result: -4.609761356905441E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: 0.000000000000000E+00
MATLAB result: 0.000000000000000E+00
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 3.254808634091251E-10
MATLAB result: 3.254808634091251E-10
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 0.000000000000000E+00
MATLAB result: 0.000000000000000E+00
Percent difference: 0.00000E+00%
==================================================
Success!
==================================================
Performing correlation cholesky matrix setup tests
correlation matrix :
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
--
correlation matrix :
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
--
correlation matrix :
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 1.0000000000000000 0.86602540378443860
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 0.50000000000000011 0.43301270189221941
0.0000000000000000 0.0000000000000000 0.25000000000000011
--
==================================================
Performing correlation matrix approximation tests
correlation cholesky matrix :
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
--
correlation cholesky matrix :
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
Agreement
Result:
1.0000000000000000 1.0000000000000000 1.0000000000000000
1.0000000000000000 1.0000000000000000 1.0000000000000000
1.0000000000000000 1.0000000000000000 1.0000000000000000
--
correlation cholesky matrix :
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 0.50000000000000011 0.43301270189221941
0.0000000000000000 0.0000000000000000 0.25000000000000011
Agreement
Result:
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.86602540378443860 1.0000000000000000 0.96650635094610959
0.86602540378443860 0.96650635094610959 1.0000000000000000
--
==================================================
Success!
==================================================
Performing hole_filling_hm_one_lev_tests
Hole-filling was conservative
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
==================================================
Success!
==================================================
Performing fill_holes_hydromet_tests
testset_in(:, 1 ) = 1.0000000000000000 2.0000000000000000 3.0000000000000000 4.0000000000000000 5.0000000000000000 6.0000000000000000
testset_in(:, 2 ) = 6.0000000000000000 5.0000000000000000 4.0000000000000000 3.0000000000000000 2.0000000000000000 1.0000000000000000
testset_in(:, 3 ) = 3.0000000000000000 3.0000000000000000 3.0000000000000000 4.0000000000000000 4.0000000000000000 4.0000000000000000
testset_in(:, 4 ) = 1.0000000000000000 3.0000000000000000 2.0000000000000000 1.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 5 ) = 1.0000000000000000 -2.0000000000000000 -4.0000000000000000 -3.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 6 ) = 2.0000000000000000 -1.0000000000000000 -1.0000000000000000 1.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 7 ) = 1.0000000000000000 4.0000000000000000 2.0000000000000000 3.0000000000000000 -1.0000000000000000 0.0000000000000000
Hole-filling was conservative
Hole-filling was conservative
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
==================================================
Success!
Nc-Ncn equations unit test
==========================
Iteration = 1
mu_chi_1 = -1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.15865525393145707
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 4.7896918412674905E-002
Nc_in_cloud (from Ncn) = 66978771.649335034
Ncm (from Ncn) = 3208076.7610693830
Ncnm (from Nc_in_cloud) = 50000000.000000007
Ncnm (from Ncm) = 50000000.000000007
Test iteration 1 is a success!
======================================================
Iteration = 2
mu_chi_1 = -1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-009
sigma_chi_2 = 1.5000000000000000E-009
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.0000000000000000
cloud fraction (2nd PDF component) = 0.0000000000000000
cloud fraction = 0.0000000000000000
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 0.0000000000000000
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 2 is a success!
======================================================
Iteration = 3
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = 5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.84134474606854293
cloud fraction (2nd PDF component) = 0.99957093966680322
cloud fraction = 0.95210308158732515
Nc_in_cloud (from Ncn) = 51650441.529586725
Ncm (from Ncn) = 49176544.545665473
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 49999999.999999993
Test iteration 3 is a success!
======================================================
Iteration = 4
mu_chi_1 = 1.0000000000000000E-008
mu_chi_2 = -1.0000000000000000E-008
sigma_chi_1 = 5.0000000000000002E-005
sigma_chi_2 = 5.0000000000000002E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 50000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.10000000000000001
mixture fraction = 0.50000000000000000
cloud fraction (1st PDF component) = 0.50007978845554835
cloud fraction (2nd PDF component) = 0.49992021154445165
cloud fraction = 0.50000000000000000
Nc_in_cloud (from Ncn) = 53982783.648312390
Ncm (from Ncn) = 26991391.824156195
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 4 is a success!
======================================================
Iteration = 5
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = 5.0000000000000002E-005
sigma_chi_1 = 9.9999999999999995E-007
sigma_chi_2 = 1.5000000000000000E-006
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.50000000000000000
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 1.0000000000000000
cloud fraction (2nd PDF component) = 1.0000000000000000
cloud fraction = 1.0000000000000000
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 50000000.000000000
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 5 is a success!
======================================================
Iteration = 6
mu_chi_1 = -9.9999999999999995E-008
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 50000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.0000000000000000
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.49601064368536840
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 9.9545377003631155E-002
Nc_in_cloud (from Ncn) = 49999999.999999993
Ncm (from Ncn) = 4977268.8501815572
Ncnm (from Nc_in_cloud) = 49999999.999999993
Ncnm (from Ncm) = 49999999.999999993
Test iteration 6 is a success!
======================================================
Iteration = 7
mu_chi_1 = 9.9999999999999995E-007
mu_chi_2 = -4.9999999999999998E-007
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 0.0000000000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.53982783727702899
cloud fraction (2nd PDF component) = 0.48670438618290790
cloud fraction = 0.49732907640173213
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 24866453.820086606
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 7 is a success!
======================================================
Iteration = 8
mu_chi_1 = 9.9999999999999995E-007
mu_chi_2 = -4.9999999999999998E-007
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-009
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.53982783727702899
cloud fraction (2nd PDF component) = 0.0000000000000000
cloud fraction = 0.10796556745540581
Nc_in_cloud (from Ncn) = 81037694.237492040
Ncm (from Ncn) = 8749280.6436284967
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 8 is a success!
======================================================
Iteration = 9
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-009
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 1.0000000000000000
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 0.20034324826655747
Nc_in_cloud (from Ncn) = 52151569.416871324
Ncm (from Ncn) = 10448214.819174858
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 9 is a success!
======================================================
Iteration = 10
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.84134474606854293
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 0.16861219748026607
Nc_in_cloud (from Ncn) = 60768988.354576334
Ncm (from Ncn) = 10246392.665117815
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000007
Test iteration 10 is a success!
======================================================
Success!
Performing corr_mtx_test
==================================================
Expected:
1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 1.00 1.10 1.20
0.00 1.00 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0.10 0.11
0.00 0.00 1.00 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.01
0.00 0.00 0.00 1.00 -1.00 -2.00 -3.00 -4.00 -5.00 -6.00 -7.00 -8.00
0.00 0.00 0.00 0.00 1.00 -0.10 -0.20 -0.30 -0.40 -0.50 -0.60 -0.70
0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 1.00 -0.00 -0.00 -0.00 -0.00 -0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 2.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 3.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 4.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00
Actual:
1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 1.00 1.10 1.20
0.00 1.00 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0.10 0.11
0.00 0.00 1.00 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.01
0.00 0.00 0.00 1.00 -1.00 -2.00 -3.00 -4.00 -5.00 -6.00 -7.00 -8.00
0.00 0.00 0.00 0.00 1.00 -0.10 -0.20 -0.30 -0.40 -0.50 -0.60 -0.70
0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 1.00 -0.00 -0.00 -0.00 -0.00 -0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 2.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 3.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 4.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00
Success!
==================================================
==================================================
Performing SILHS category test
==================================================
Success!
Performing hydrometeor mu and sigma values unit test
====================================================
PDF parameter set 1:
hmm = 2.0000000000000002E-005
mixt_frac = 2.7000000000000000E-002
precip_frac = 8.0000000000000002E-002
precip_frac_1 = 1.0000000000000000
precip_frac_2 = 5.4470709146968145E-002
hmp2_ip_on_hmm2_ip = 3.6000000000000001
hmm_ip = 2.5000000000000001E-004
hmp2 = 2.2599999999999997E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 2:
hmm = 5.0000000000000004E-006
mixt_frac = 0.50000000000000000
precip_frac = 0.50000000000000000
precip_frac_1 = 0.50000000000000000
precip_frac_2 = 0.50000000000000000
hmp2_ip_on_hmm2_ip = 1.0000000000000000
hmm_ip = 1.0000000000000001E-005
hmp2 = 7.5000000000000012E-011
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 3:
hmm = 1.0000000000000000E-010
mixt_frac = 0.25000000000000000
precip_frac = 0.40000000000000002
precip_frac_1 = 0.75000000000000000
precip_frac_2 = 0.28333333333333338
hmp2_ip_on_hmm2_ip = 0.50000000000000000
hmm_ip = 2.5000000000000002E-010
hmp2 = 2.7500000000000010E-020
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 4:
hmm = 4.0000000000000003E-005
mixt_frac = 1.0000000000000000E-002
precip_frac = 0.10000000000000001
precip_frac_1 = 1.0000000000000000E-002
precip_frac_2 = 0.10090909090909091
hmp2_ip_on_hmm2_ip = 2.5000000000000000
hmm_ip = 4.0000000000000002E-004
hmp2 = 5.4400000000000004E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 5:
hmm = 4.0000000000000003E-005
mixt_frac = 0.98999999999999999
precip_frac = 0.10000000000000001
precip_frac_1 = 0.10090909090909091
precip_frac_2 = 1.0000000000000278E-002
hmp2_ip_on_hmm2_ip = 2.5000000000000000
hmm_ip = 4.0000000000000002E-004
hmp2 = 5.4400000000000004E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 6:
hmm = 1.0000000000000001E-005
mixt_frac = 0.12500000000000000
precip_frac = 1.0000000000000000
precip_frac_1 = 1.0000000000000000
precip_frac_2 = 1.0000000000000000
hmp2_ip_on_hmm2_ip = 1.5000000000000000
hmm_ip = 1.0000000000000001E-005
hmp2 = 1.5000000000000005E-010
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 7:
hmm = 6.0000000000000002E-005
mixt_frac = 5.0000000000000003E-002
precip_frac = 0.11000000000000000
precip_frac_1 = 0.90000000000000002
precip_frac_2 = 6.8421052631578952E-002
hmp2_ip_on_hmm2_ip = 5.0000000000000000
hmm_ip = 5.4545454545454548E-004
hmp2 = 1.9276363636363637E-007
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 8:
hmm = 7.9999999999999996E-007
mixt_frac = 0.80000000000000004
precip_frac = 0.25000000000000000
precip_frac_1 = 0.10000000000000001
precip_frac_2 = 0.85000000000000009
hmp2_ip_on_hmm2_ip = 0.75000000000000000
hmm_ip = 3.1999999999999999E-006
hmp2 = 3.8399999999999998E-012
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 9:
hmm = 1.3499999999999999E-005
mixt_frac = 0.10000000000000001
precip_frac = 0.10000000000000001
precip_frac_1 = 0.50000000000000000
precip_frac_2 = 5.5555555555555559E-002
hmp2_ip_on_hmm2_ip = 2.0000000000000000
hmm_ip = 1.3499999999999997E-004
hmp2 = 5.2852499999999985E-009
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 10 (randomly generated):
Random seed values = 2024 6 5 -300 3 12 53 398
hmm = 2.4553947299393140E-005
mixt_frac = 0.12497883530081898
precip_frac = 0.74387776835586539
precip_frac_1 = 0.78404122225061590
precip_frac_2 = 0.73814124232434963
hmp2_ip_on_hmm2_ip = 0.70932723851180712
hmm_ip = 3.3008040223681909E-005
hmp2 = 7.8247524683400157E-010
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Checking values with precipitation in 1st PDF component only.
Checking values with precipitation in 2nd PDF component only.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for ADG1
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 0.0000000000000000
thlp2 = 0.0000000000000000
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 0.0000000000000000
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 10 (randomly generated):
Random seed values = 2024 6 5 -300 3 12 53 399
wm = -2.8921054012137182E-002
rtm = 3.3465068428738501E-003
thlm = 304.14591916225970
wp2 = 0.78185982049609515
rtp2 = 3.2784316366352870E-007
thlp2 = 2.1843157304127860
Skw = 2.4892337405584852
wp3 = 1.7209134236537245
Skrt = -0.56841645224213833
rtp3 = -1.0670034843528491E-010
Skthl = 2.0856631511841193
thlp3 = 6.7331344741782075
wprtp = 8.1001241424688962E-005
wpthlp = 2.4667216909043534E-002
rtpthlp = 7.6161113003541173E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for LY93
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 0.0000000000000000
thlp2 = 0.0000000000000000
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 0.0000000000000000
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 10 (randomly generated):
Random seed values = 2024 6 5 -300 3 12 53 399
wm = -2.8921054012137182E-002
rtm = 3.3465068428738501E-003
thlm = 304.14591916225970
wp2 = 0.78185982049609515
rtp2 = 3.2784316366352870E-007
thlp2 = 2.1843157304127860
Skw = 2.4892337405584852
wp3 = 1.7209134236537245
Skrt = -0.56841645224213833
rtp3 = -1.0670034843528491E-010
Skthl = 2.0856631511841193
thlp3 = 6.7331344741782075
wprtp = 8.1001241424688962E-005
wpthlp = 2.4667216909043534E-002
rtpthlp = 7.6161113003541173E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for TSDADG
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 0.0000000000000000
thlp2 = 0.0000000000000000
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 0.0000000000000000
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
PDF parameter set 10 (randomly generated):
Random seed values = 2024 6 5 -300 3 12 53 399
wm = -2.8921054012137182E-002
rtm = 3.3465068428738501E-003
thlm = 304.14591916225970
wp2 = 0.78185982049609515
rtp2 = 3.2784316366352870E-007
thlp2 = 2.1843157304127860
Skw = 2.4892337405584852
wp3 = 1.7209134236537245
Skrt = -0.56841645224213833
rtp3 = -1.0670034843528491E-010
Skthl = 2.0856631511841193
thlp3 = 6.7331344741782075
wprtp = 8.1001241424688962E-005
wpthlp = 2.4667216909043534E-002
rtpthlp = 7.6161113003541173E-004
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for the new PDF
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 0.0000000000000000
thlp2 = 0.0000000000000000
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 0.0000000000000000
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 10 (randomly generated):
Random seed values = 2024 6 5 -300 3 12 53 400
wm = -2.8921054012137182E-002
rtm = 3.3465068428740188E-003
thlm = 304.14591916225959
wp2 = 0.78185981971846996
rtp2 = 7.2771365901016581E-007
thlp2 = 2.1839452743169301
Skw = -4.4355572330901305
wp3 = -3.0664898390413051
Skrt = -2.3975553283548039
rtp3 = -1.4883649292417896E-009
Skthl = -0.75977377067999463
thlp3 = -2.4521493847698577
wprtp = 1.5685356750520395E-004
wpthlp = -0.53658136186996164
rtpthlp = -1.1346022710128066E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for the new hybrid PDF
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 0.0000000000000000
thlp2 = 0.0000000000000000
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 0.0000000000000000
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.0000000000000000
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 10 (randomly generated):
Random seed values = 2024 6 5 -300 3 12 53 401
wm = -2.8921054012137182E-002
rtm = 3.3465068428740123E-003
thlm = 304.14591916225959
wp2 = 0.78185981975939756
rtp2 = 7.5847292805926665E-007
thlp2 = 2.1839613048295283
Skw = -4.3367285593586935
wp3 = -2.9981653632576726
Skrt = 0.27427139225127350
rtp3 = 1.8117181596507917E-010
Skthl = -3.3327474886209645
thlp3 = -10.756471201579213
wprtp = -3.0132127517435163E-004
wpthlp = -0.24535882935555173
rtpthlp = 1.1583372461291975E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
Success!
Performing spurious source unit test
====================================
Test 1
Vertical integral of <rt> before advance_xm_wpxp = 28.316670259590918
Vertical integral of <rt> after advance_xm_wpxp = 28.454761250379878
Vertical integral of <rt> forcing = -3.9696697370157397E-005
Flux of <rt> at the surface = 5.0000000000000001E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = 2.4909544912854464E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 793918.42642888101
Vertical integral of <thl> after advance_xm_wpxp = 793908.03522151255
Vertical integral of <thl> forcing = -4.4637357896125940E-002
Flux of <thl> at the surface = 1.0000000000000000E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = 1.2514503322513804E-012
The spurious source of <thl> is within acceptable limits.
Test 2
Vertical integral of <rt> before advance_xm_wpxp = 26.009405523167526
Vertical integral of <rt> after advance_xm_wpxp = 26.086533506672254
Vertical integral of <rt> forcing = -4.7586983234890385E-005
Flux of <rt> at the surface = 3.0468026158400640E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -2.4719809532669501E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 794228.57557510782
Vertical integral of <thl> after advance_xm_wpxp = 794216.21379668976
Vertical integral of <thl> forcing = -4.7299533292816984E-002
Flux of <thl> at the surface = 6.0936052316801284E-003
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = 9.1071594710001591E-013
The spurious source of <thl> is within acceptable limits.
Test 3
Vertical integral of <rt> before advance_xm_wpxp = 32.488160575020316
Vertical integral of <rt> after advance_xm_wpxp = 32.653539058173983
Vertical integral of <rt> forcing = -4.4879115392659819E-005
Flux of <rt> at the surface = 5.9614072590493501E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -5.2224663395911142E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 796662.16369387601
Vertical integral of <thl> after advance_xm_wpxp = 796650.73671383865
Vertical integral of <thl> forcing = -5.0012747976286527E-002
Flux of <thl> at the surface = 1.1922814518098700E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = 3.2586433551529126E-013
The spurious source of <thl> is within acceptable limits.
Test 4
Vertical integral of <rt> before advance_xm_wpxp = 38.459769993480627
Vertical integral of <rt> after advance_xm_wpxp = 38.605988452445068
Vertical integral of <rt> forcing = -5.9075530029584309E-005
Flux of <rt> at the surface = 5.4647039324450723E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -1.2007539060276962E-016
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 797908.43719983357
Vertical integral of <thl> after advance_xm_wpxp = 797891.85964701325
Vertical integral of <thl> forcing = -6.6187917265963750E-002
Flux of <thl> at the surface = 1.0929407864890144E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -3.1780134079895106E-015
The spurious source of <thl> is within acceptable limits.
Test 5
Vertical integral of <rt> before advance_xm_wpxp = 37.974824594408936
Vertical integral of <rt> after advance_xm_wpxp = 38.128754061576444
Vertical integral of <rt> forcing = -4.8894770553626077E-005
Flux of <rt> at the surface = 5.6199299444530928E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = 1.0089856467693226E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 795887.85158065951
Vertical integral of <thl> after advance_xm_wpxp = 795872.04546908382
Vertical integral of <thl> forcing = -6.3926898473695579E-002
Flux of <thl> at the surface = 1.1239859888906186E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -8.3184847898820635E-013
The spurious source of <thl> is within acceptable limits.
Success!
Running tuner tests
-------------------
goldstein_price pass
rastrigin pass
himmelblau pass
eggholder pass
schaffer pass
==================================================
Performing 'mean vertical velocity in clouds' tests
Success!
==================================================
==================================================
Performing 'Smooth Heaviside Peskin' tests
Case 1: heaviside_smth_range = 0, smooth Heaviside collapses to Heaviside
Input: -1.0000000000000000 -1.0000000000000000E-010 1.0000000000000000E-010 1.0000000000000000
Expected outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000 1.0000000000000000
True outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000 1.0000000000000000
Case 2: heaviside_smth_range = 2.0000000000000000
Input: -2.0000000001000000 -1.0000000000000000 1.0000000000000000 2.0000000001000000
Expected outcome: 0.0000000000000000 9.0845056908100005E-002 0.90915494309000000 1.0000000000000000
True outcome: 0.0000000000000000 9.0845056909999999E-002 0.90915494309000000 1.0000000000000000
Success!
==================================================
==================================================
Performing 'Smooth Min / Max' tests
Input: -1.0000000000000000 -1.0000000000000000E-010 1.0000000000000000E-010 1.0000000000000000
(Simple) min:
Expected outcome: -1.0000000000000000 -1.0000000000000000E-010 0.0000000000000000 0.0000000000000000
True outcome: -1.0000000000000000 -1.0000000000000000E-010 0.0000000000000000 0.0000000000000000
(Simple) max:
Expected outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000E-010 1.0000000000000000
True outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000E-010 1.0000000000000000
Input: -2.0000000001000000 -1.0000000000000000 1.0000000000000000 2.0000000001000000
Smooth min:
Expected outcome: -2.2247448714824141 -1.3660254037844388 -0.36602540378443871 -0.22474487138241406
True outcome: -2.2247448714824141 -1.3660254037844388 -0.36602540378443871 -0.22474487138241406
Smooth max:
Expected outcome: 0.22474487138241406 0.36602540378443871 1.3660254037844388 2.2247448714824141
True outcome: 0.22474487138241406 0.36602540378443871 1.3660254037844388 2.2247448714824141
Testing smooth min and max with min_max_smth_mag=1e-7, input_var1 = equidistant grid on [-1, 1), input_var2 = 0
Input: 1.0000000000000000 10.000000000000000 100.00000000000000 1000.0000000000000
Smooth min:
Expected outcome: -1.1180339887498949 -1.0226805085936306 -1.0024751868658441 -1.0002497501874359
True outcome: -1.1180339887498949 -1.0226805085936306 -1.0024751868658441 -1.0002497501874359
Smooth max:
Expected outcome: 1.1180339887498949 1.0226805085936306 1.0024751868658441 1.0002497501874359
True outcome: 1.1180339887498949 1.0226805085936306 1.0024751868658441 1.0002497501874359
Input_var1: -1000000.0000000000 -10000000.000000000 -100000000.00000000 -1000000000.0000000
Input_var2: 1.0000000000000000 10.000000000000000 100.00000000000000 1000.0000000000000
Smooth min:
Expected outcome: -1000000.0000002501 -10000000.000000026 -100000000.00000000 -1000000000.0000000
True outcome: -1000000.0000002501 -10000000.000000026 -100000000.00000000 -1000000000.0000000
Smooth max:
Expected outcome: 1.0000002500019036 10.000000025145710 100.00000000000000 1000.0000000000000
True outcome: 1.0000002500019036 10.000000025145710 100.00000000000000 1000.0000000000000
Input_var1: -1000000.0000000000
Input_var2: 1.0000000000000000
Smooth min:
Expected outcome: -1000000.0000002501
True outcome: -1000000.0000002501
Smooth max:
Expected outcome: 1.0000002500019036
True outcome: 1.0000002500019036
Success!
==================================================
All tests have succeeded.
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Declarative: Post Actions)
[Pipeline] script
[Pipeline] {
[Pipeline] cleanWs
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Deferred wipeout is used...
[WS-CLEANUP] done
[Pipeline] }
[Pipeline] // script
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
[Pipeline] // node
[Pipeline] End of Pipeline
Finished: SUCCESS
![[Jenkins]](/jenkins/static/57c8a776/images/svgs/logo.svg){kind=logo}
