Console Output
+ python tests/run_G_unit_tests.py
Running G_unit_tests
Performing KK integrals tests
Percent Difference Tolerance (maximum acceptable percent difference between the CLUBB results and the MATLAB results using the same equations): 1.50000E-12
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 1
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: 3.940566852245362E-04
MATLAB result: 3.940566852245361E-04
Percent difference: 1.37569E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: 3.927115990964176E-04
MATLAB result: 3.927115990964175E-04
Percent difference: 2.76081E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: 3.959157231937519E-04
MATLAB result: 3.959157231937519E-04
Percent difference: 1.36923E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: 3.961224408774508E-04
MATLAB result: 3.961224408774508E-04
Percent difference: 1.36852E-14%
Agreement with regards to integral: Trivariate NNL
Obtained result: 5.957899876478518E-10
MATLAB result: 5.957899876478559E-10
Percent difference: 6.94188E-13%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 5.299646183560617E-10
MATLAB result: 5.299646183560650E-10
Percent difference: 6.24329E-13%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 5.543555152546510E-10
MATLAB result: 5.543555152546526E-10
Percent difference: 2.98430E-13%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 5.286452253001267E-10
MATLAB result: 5.286452253001284E-10
Percent difference: 3.12944E-13%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -9.854231981928352E-04
MATLAB result: -9.854231981928350E-04
Percent difference: 2.20048E-14%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: -9.922448817549015E-04
MATLAB result: -9.922448817549015E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 8.940070763287877E-09
MATLAB result: 8.940070763287870E-09
Percent difference: 7.40201E-14%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 8.942709549399747E-09
MATLAB result: 8.942709549399743E-09
Percent difference: 3.69991E-14%
Agreement with regards to integral: Bivariate LL
Obtained result: 1.007487885941809E-02
MATLAB result: 1.007487885941809E-02
Percent difference: 1.72183E-14%
==================================================
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 2
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: -4.441972023148827E-05
MATLAB result: -4.441972023148829E-05
Percent difference: 4.57652E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: -4.559373570842309E-05
MATLAB result: -4.559373570842311E-05
Percent difference: 4.45868E-14%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: -5.040842768062482E-05
MATLAB result: -5.040842768062482E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: -5.038775591225493E-05
MATLAB result: -5.038775591225493E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL
Obtained result: 4.629614112194526E-09
MATLAB result: 4.629614112194527E-09
Percent difference: 1.78672E-14%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 4.604609365066508E-09
MATLAB result: 4.604609365066509E-09
Percent difference: 1.79642E-14%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 4.685272472815394E-09
MATLAB result: 4.685272472815394E-09
Percent difference: 1.76549E-14%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 4.683452323676534E-09
MATLAB result: 4.683452323676534E-09
Percent difference: 0.00000E+00%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -1.088125285831538E-04
MATLAB result: -1.088125285831538E-04
Percent difference: 2.49099E-14%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: -9.922448817549016E-05
MATLAB result: -9.922448817549016E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 7.907812698669825E-10
MATLAB result: 7.907812698669821E-10
Percent difference: 5.23015E-14%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 6.330953526469324E-10
MATLAB result: 6.330953526469324E-10
Percent difference: 0.00000E+00%
==================================================
Saturation option (x2_opt for covariance integrals and x1_opt for mean integrals): 3
Agreement with regards to integral: Quadrivariate NNLL
Obtained result: -7.622010070476262E-05
MATLAB result: -7.622010070476262E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x1)
Obtained result: -7.695119321547280E-05
MATLAB result: -7.695119321547280E-05
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x2)
Obtained result: -1.000000000000000E-04
MATLAB result: -1.000000000000000E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Quadrivariate NNLL (const. x1 and x2)
Obtained result: -1.000000000000000E-04
MATLAB result: -1.000000000000000E-04
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL
Obtained result: 4.851589269710427E-09
MATLAB result: 4.851589269710427E-09
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL (const. x1)
Obtained result: 4.837259568295437E-09
MATLAB result: 4.837259568295437E-09
Percent difference: 1.71002E-14%
Agreement with regards to integral: Trivariate NNL (const. x2)
Obtained result: 5.000000000000000E-09
MATLAB result: 5.000000000000000E-09
Percent difference: 0.00000E+00%
Agreement with regards to integral: Trivariate NNL (const. x1 and x2)
Obtained result: 5.000000000000000E-09
MATLAB result: 5.000000000000000E-09
Percent difference: 0.00000E+00%
--------------------------------------------------
Agreement with regards to integral: Trivariate NLL
Obtained result: -4.609761356905442E-05
MATLAB result: -4.609761356905441E-05
Percent difference: 1.46998E-14%
Agreement with regards to integral: Trivariate NLL (const. x1)
Obtained result: 0.000000000000000E+00
MATLAB result: 0.000000000000000E+00
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL
Obtained result: 3.254808634091251E-10
MATLAB result: 3.254808634091251E-10
Percent difference: 0.00000E+00%
Agreement with regards to integral: Bivariate NL (const. x1)
Obtained result: 0.000000000000000E+00
MATLAB result: 0.000000000000000E+00
Percent difference: 0.00000E+00%
==================================================
Success!
==================================================
Performing correlation cholesky matrix setup tests
correlation matrix :
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
--
correlation matrix :
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
--
correlation matrix :
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 1.0000000000000000 0.86602540378443860
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 0.50000000000000011 0.43301270189221941
0.0000000000000000 0.0000000000000000 0.25000000000000011
--
==================================================
Performing correlation matrix approximation tests
correlation cholesky matrix :
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
Agreement
Result:
1.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 1.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 1.0000000000000000
--
correlation cholesky matrix :
1.0000000000000000 1.0000000000000000 1.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
0.0000000000000000 0.0000000000000000 0.0000000000000000
Agreement
Result:
1.0000000000000000 1.0000000000000000 1.0000000000000000
1.0000000000000000 1.0000000000000000 1.0000000000000000
1.0000000000000000 1.0000000000000000 1.0000000000000000
--
correlation cholesky matrix :
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.0000000000000000 0.50000000000000011 0.43301270189221941
0.0000000000000000 0.0000000000000000 0.25000000000000011
Agreement
Result:
1.0000000000000000 0.86602540378443860 0.86602540378443860
0.86602540378443860 1.0000000000000000 0.96650635094610959
0.86602540378443860 0.96650635094610959 1.0000000000000000
--
==================================================
Success!
==================================================
Performing hole_filling_hm_one_lev_tests
Hole-filling was conservative
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: Hole filling failed! A hole could not be filled.
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
==================================================
Success!
==================================================
Performing fill_holes_hydromet_tests
testset_in(:, 1 ) = 1.0000000000000000 2.0000000000000000 3.0000000000000000 4.0000000000000000 5.0000000000000000 6.0000000000000000
testset_in(:, 2 ) = 6.0000000000000000 5.0000000000000000 4.0000000000000000 3.0000000000000000 2.0000000000000000 1.0000000000000000
testset_in(:, 3 ) = 3.0000000000000000 3.0000000000000000 3.0000000000000000 4.0000000000000000 4.0000000000000000 4.0000000000000000
testset_in(:, 4 ) = 1.0000000000000000 3.0000000000000000 2.0000000000000000 1.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 5 ) = 1.0000000000000000 -2.0000000000000000 -4.0000000000000000 -3.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 6 ) = 2.0000000000000000 -1.0000000000000000 -1.0000000000000000 1.0000000000000000 -1.0000000000000000 0.0000000000000000
testset_in(:, 7 ) = 1.0000000000000000 4.0000000000000000 2.0000000000000000 3.0000000000000000 -1.0000000000000000 0.0000000000000000
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: One-level hole filling was not able to fill holes completely! The holes were filled partially. |total_hole| > total_mass
Warning: Hole filling failed! A hole could not be filled.
Warning: One-level hole filling was not successful! total_mass ~= 0
Hole-filling was conservative
Hole-filling was conservative
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
Hole-filling was conservative
Hole not entirely filled, as expected
Hole-filling was conservative
==================================================
Success!
Nc-Ncn equations unit test
==========================
Iteration = 1
mu_chi_1 = -1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.15865525393145707
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 4.7896918412674905E-002
Nc_in_cloud (from Ncn) = 66978771.649335034
Ncm (from Ncn) = 3208076.7610693830
Ncnm (from Nc_in_cloud) = 50000000.000000007
Ncnm (from Ncm) = 50000000.000000007
Test iteration 1 is a success!
======================================================
Iteration = 2
mu_chi_1 = -1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-009
sigma_chi_2 = 1.5000000000000000E-009
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.0000000000000000
cloud fraction (2nd PDF component) = 0.0000000000000000
cloud fraction = 0.0000000000000000
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 0.0000000000000000
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 2 is a success!
======================================================
Iteration = 3
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = 5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.40000000000000002
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 0.84134474606854293
cloud fraction (2nd PDF component) = 0.99957093966680322
cloud fraction = 0.95210308158732504
Nc_in_cloud (from Ncn) = 51650441.529586732
Ncm (from Ncn) = 49176544.545665480
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 3 is a success!
======================================================
Iteration = 4
mu_chi_1 = 1.0000000000000000E-008
mu_chi_2 = -1.0000000000000000E-008
sigma_chi_1 = 5.0000000000000002E-005
sigma_chi_2 = 5.0000000000000002E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 50000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.10000000000000001
mixture fraction = 0.50000000000000000
cloud fraction (1st PDF component) = 0.50007978845554835
cloud fraction (2nd PDF component) = 0.49992021154445165
cloud fraction = 0.50000000000000000
Nc_in_cloud (from Ncn) = 53982783.648312390
Ncm (from Ncn) = 26991391.824156195
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 4 is a success!
======================================================
Iteration = 5
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = 5.0000000000000002E-005
sigma_chi_1 = 9.9999999999999995E-007
sigma_chi_2 = 1.5000000000000000E-006
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 25000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.50000000000000000
mixture fraction = 0.29999999999999999
cloud fraction (1st PDF component) = 1.0000000000000000
cloud fraction (2nd PDF component) = 1.0000000000000000
cloud fraction = 1.0000000000000000
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 50000000.000000000
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 5 is a success!
======================================================
Iteration = 6
mu_chi_1 = -9.9999999999999995E-008
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 50000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.0000000000000000
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.49601064368536840
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 9.9545377003631155E-002
Nc_in_cloud (from Ncn) = 49999999.999999993
Ncm (from Ncn) = 4977268.8501815572
Ncnm (from Nc_in_cloud) = 49999999.999999993
Ncnm (from Ncm) = 49999999.999999993
Test iteration 6 is a success!
======================================================
Iteration = 7
mu_chi_1 = 9.9999999999999995E-007
mu_chi_2 = -4.9999999999999998E-007
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 0.0000000000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.53982783727702899
cloud fraction (2nd PDF component) = 0.48670438618290790
cloud fraction = 0.49732907640173213
Nc_in_cloud (from Ncn) = 50000000.000000000
Ncm (from Ncn) = 24866453.820086606
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 7 is a success!
======================================================
Iteration = 8
mu_chi_1 = 9.9999999999999995E-007
mu_chi_2 = -4.9999999999999998E-007
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-009
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.53982783727702899
cloud fraction (2nd PDF component) = 0.0000000000000000
cloud fraction = 0.10796556745540581
Nc_in_cloud (from Ncn) = 81037694.237492040
Ncm (from Ncn) = 8749280.6436284967
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 8 is a success!
======================================================
Iteration = 9
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-009
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 1.0000000000000000
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 0.20034324826655747
Nc_in_cloud (from Ncn) = 52151569.416871324
Ncm (from Ncn) = 10448214.819174858
Ncnm (from Nc_in_cloud) = 50000000.000000000
Ncnm (from Ncm) = 50000000.000000000
Test iteration 9 is a success!
======================================================
Iteration = 10
mu_chi_1 = 1.0000000000000001E-005
mu_chi_2 = -5.0000000000000002E-005
sigma_chi_1 = 1.0000000000000001E-005
sigma_chi_2 = 1.5000000000000000E-005
mu_Ncn_1 = mu_Ncn_2 = 50000000.000000000
sigma_Ncn_1 = sigma_Ncn_2 = 75000000.000000000
corr_chi_Ncn_1 = corr_chi_Ncn_2 = 0.69999999999999996
mixture fraction = 0.20000000000000001
cloud fraction (1st PDF component) = 0.84134474606854293
cloud fraction (2nd PDF component) = 4.2906033319683735E-004
cloud fraction = 0.16861219748026607
Nc_in_cloud (from Ncn) = 60768988.354576342
Ncm (from Ncn) = 10246392.665117815
Ncnm (from Nc_in_cloud) = 50000000.000000007
Ncnm (from Ncm) = 50000000.000000007
Test iteration 10 is a success!
======================================================
Success!
Performing corr_mtx_test
==================================================
Expected:
1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 1.00 1.10 1.20
0.00 1.00 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0.10 0.11
0.00 0.00 1.00 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.01
0.00 0.00 0.00 1.00 -1.00 -2.00 -3.00 -4.00 -5.00 -6.00 -7.00 -8.00
0.00 0.00 0.00 0.00 1.00 -0.10 -0.20 -0.30 -0.40 -0.50 -0.60 -0.70
0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 1.00 -0.00 -0.00 -0.00 -0.00 -0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 2.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 3.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 4.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00
Actual:
1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 1.00 1.10 1.20
0.00 1.00 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 0.10 0.11
0.00 0.00 1.00 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.01
0.00 0.00 0.00 1.00 -1.00 -2.00 -3.00 -4.00 -5.00 -6.00 -7.00 -8.00
0.00 0.00 0.00 0.00 1.00 -0.10 -0.20 -0.30 -0.40 -0.50 -0.60 -0.70
0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 1.00 -0.00 -0.00 -0.00 -0.00 -0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 2.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 3.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 4.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00
Success!
==================================================
==================================================
Performing SILHS category test
==================================================
Success!
Performing hydrometeor mu and sigma values unit test
====================================================
PDF parameter set 1:
hmm = 2.0000000000000002E-005
mixt_frac = 2.7000000000000000E-002
precip_frac = 8.0000000000000002E-002
precip_frac_1 = 1.0000000000000000
precip_frac_2 = 5.4470709146968145E-002
hmp2_ip_on_hmm2_ip = 3.6000000000000001
hmm_ip = 2.5000000000000001E-004
hmp2 = 2.2599999999999997E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 2:
hmm = 5.0000000000000004E-006
mixt_frac = 0.50000000000000000
precip_frac = 0.50000000000000000
precip_frac_1 = 0.50000000000000000
precip_frac_2 = 0.50000000000000000
hmp2_ip_on_hmm2_ip = 1.0000000000000000
hmm_ip = 1.0000000000000001E-005
hmp2 = 7.5000000000000012E-011
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 3:
hmm = 1.0000000000000000E-010
mixt_frac = 0.25000000000000000
precip_frac = 0.40000000000000002
precip_frac_1 = 0.75000000000000000
precip_frac_2 = 0.28333333333333338
hmp2_ip_on_hmm2_ip = 0.50000000000000000
hmm_ip = 2.5000000000000002E-010
hmp2 = 2.7500000000000010E-020
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 4:
hmm = 4.0000000000000003E-005
mixt_frac = 1.0000000000000000E-002
precip_frac = 0.10000000000000001
precip_frac_1 = 1.0000000000000000E-002
precip_frac_2 = 0.10090909090909091
hmp2_ip_on_hmm2_ip = 2.5000000000000000
hmm_ip = 4.0000000000000002E-004
hmp2 = 5.4400000000000004E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 5:
hmm = 4.0000000000000003E-005
mixt_frac = 0.98999999999999999
precip_frac = 0.10000000000000001
precip_frac_1 = 0.10090909090909091
precip_frac_2 = 1.0000000000000278E-002
hmp2_ip_on_hmm2_ip = 2.5000000000000000
hmm_ip = 4.0000000000000002E-004
hmp2 = 5.4400000000000004E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 6:
hmm = 1.0000000000000001E-005
mixt_frac = 0.12500000000000000
precip_frac = 1.0000000000000000
precip_frac_1 = 1.0000000000000000
precip_frac_2 = 1.0000000000000000
hmp2_ip_on_hmm2_ip = 1.5000000000000000
hmm_ip = 1.0000000000000001E-005
hmp2 = 1.5000000000000005E-010
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 7:
hmm = 6.0000000000000002E-005
mixt_frac = 5.0000000000000003E-002
precip_frac = 0.11000000000000000
precip_frac_1 = 0.90000000000000002
precip_frac_2 = 6.8421052631578952E-002
hmp2_ip_on_hmm2_ip = 5.0000000000000000
hmm_ip = 5.4545454545454548E-004
hmp2 = 1.9276363636363637E-007
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 8:
hmm = 7.9999999999999996E-007
mixt_frac = 0.80000000000000004
precip_frac = 0.25000000000000000
precip_frac_1 = 0.10000000000000001
precip_frac_2 = 0.85000000000000009
hmp2_ip_on_hmm2_ip = 0.75000000000000000
hmm_ip = 3.1999999999999999E-006
hmp2 = 3.8399999999999998E-012
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 9:
hmm = 1.3499999999999999E-005
mixt_frac = 0.10000000000000001
precip_frac = 0.10000000000000001
precip_frac_1 = 0.50000000000000000
precip_frac_2 = 5.5555555555555559E-002
hmp2_ip_on_hmm2_ip = 2.0000000000000000
hmm_ip = 1.3499999999999997E-004
hmp2 = 5.2852499999999985E-009
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
PDF parameter set 10 (randomly generated):
Random seed values = 2026 7 3 -300 10 42 43 326
hmm = 2.4553477912815005E-005
mixt_frac = 0.12495912106457235
precip_frac = 0.23457555407546615
precip_frac_1 = 0.78329090483807895
precip_frac_2 = 0.15621694295623137
hmp2_ip_on_hmm2_ip = 4.2410332081357174
hmm_ip = 1.0467193825711190E-004
hmp2 = 1.2866897179633069E-008
hm_tol = 1.0000000000000000E-010
precip_frac_tol = 1.0000000000000000E-002
Running tests for the above parameter set for all combinations of omicron and zeta. Omicron values are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Checking values with precipitation in 1st PDF component only.
Checking values with precipitation in 2nd PDF component only.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for ADG1
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
PDF parameter set 10 (randomly generated):
Random seed values = 2026 7 3 -300 10 42 43 327
wm = -2.8930441743699964E-002
rtm = 3.3461045115218782E-003
thlm = 292.50540141951433
wp2 = 0.78110192411979451
rtp2 = 2.3257630461149413E-006
thlp2 = 0.63937851470279450
Skw = -2.8889886668675322
wp3 = -1.9943776545858698
Skrt = 3.3033416845329500
rtp3 = 1.1716602504093721E-008
Skthl = -4.3993269463072782
thlp3 = -2.2491752527269484
wprtp = -1.0605256651408873E-003
wpthlp = -0.23055856919453577
rtpthlp = 1.0974993242823664E-003
Running tests for the above parameter set for various values of sigma_sqd_w for the setting variable (w). Values of sigma_sqd_w are 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1 (or 0.99).
Running tests for the above parameter set for the full PDF (the setting of sigma_sqd_w is handled the same way as in the model code).
Running ADG1 expected-failure tests.
ADG1_w_closure correctly failed when given wp2 = 0.
ADG1_pdf_driver correctly failed when given thlp2 = 0.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for LY93
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
PDF parameter set 10 (randomly generated):
Random seed values = 2026 7 3 -300 10 42 43 328
wm = -2.8930441743699964E-002
rtm = 3.3461045115218226E-003
thlm = 292.50540141951438
wp2 = 0.78110192416072399
rtp2 = 2.7870411456772052E-006
thlp2 = 0.63952291332578359
Skw = -3.9764903130654314
wp3 = -2.7451209884036039
Skrt = 2.8818046425004811
rtp3 = 1.3408481810095643E-008
Skthl = -2.5253277310709965
thlp3 = -1.2915223075263527
wprtp = -9.3836410661024246E-004
wpthlp = 0.41287004024734808
rtpthlp = -1.2015511246569060E-003
Running tests for the above parameter set for the setting variable (w is used here).
Running tests for the above parameter set for the full PDF.
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for TSDADG
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
PDF parameter set 10 (randomly generated):
Random seed values = 2026 7 3 -300 10 42 43 329
wm = -2.8930441743699964E-002
rtm = 3.3461045115218161E-003
thlm = 292.50540141951438
wp2 = 0.78110192420165092
rtp2 = 2.7562892724341372E-006
thlp2 = 0.63953906932136428
Skw = -3.8776616393347139
wp3 = -2.6768958339787883
Skrt = 0.20988136236986765
rtp3 = 9.6041971582725377E-010
Skthl = 0.24544855080385641
thlp3 = 0.12553392073803862
wprtp = 1.1221607185237996E-003
wpthlp = -3.8627794223008928E-003
rtpthlp = -1.1949189460457646E-003
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for the new PDF
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 10 (randomly generated):
Random seed values = 2026 7 3 -300 10 42 43 333
wm = -2.8930441743699964E-002
rtm = 3.3461045115218404E-003
thlm = 292.50540141951438
wp2 = 0.78110192436536119
rtp2 = 2.6332817785454676E-006
thlp2 = 0.63947444435678058
Skw = -3.4819607092575868
wp3 = -2.4037285835024398
Skrt = 4.1475744799455594
rtp3 = 1.7723120674714157E-008
Skthl = -1.8374619492751516
thlp3 = -0.93962192976690129
wprtp = -1.2337630865791936E-003
wpthlp = 0.25726331490906046
rtpthlp = -1.1678922406445982E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
Success!
Performing PDF parameter values unit test
=========================================
Performing PDF parameter unit tests for the new hybrid PDF
PDF parameter set 1:
wm = -5.0000000000000001E-003
rtm = 4.2868400000000001E-003
thlm = 309.13099999999997
wp2 = 3.3741899999999998E-002
rtp2 = 1.1786499999999999E-006
thlp2 = 5.9920000000000001E-002
Skw = 8.6882480819056749
wp3 = 5.3850099999999998E-002
Skrt = 1.4880899999999999
rtp3 = 1.9041733779221134E-009
Skthl = -1.4580900000000001
thlp3 = -2.1386614365822010E-002
wprtp = 2.3725400000000002E-005
wpthlp = -5.5512699999999996E-003
rtpthlp = -2.3917778634313013E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 2:
wm = 1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.10000000000000001
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = -4.5000000000000000
wp3 = -0.14230249470757708
Skrt = 1.0000000000000000
rtp3 = 1.1180339887498949E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = -5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 3:
wm = -1.0000000000000000E-002
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.50000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.10000000000000001
Skw = 4.5000000000000000
wp3 = 1.5909902576697321
Skrt = 2.5000000000000000
rtp3 = 2.7950849718747374E-008
Skthl = -2.5000000000000000
thlp3 = -7.9056941504209499E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -6.3639610306789288E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 4:
wm = 0.10000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 5.0000000000000000
rtp2 = 6.9999999999999999E-006
thlp2 = 1.0000000000000000
Skw = 2.0000000000000000
wp3 = 22.360679774997898
Skrt = 1.5000000000000000
rtp3 = 2.7780388766178202E-008
Skthl = -1.5000000000000000
thlp3 = -1.5000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -1.0000000000000000E-002
rtpthlp = -2.3811761799581318E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 5:
wm = -1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.29999999999999999
rtp2 = 1.9999999999999999E-006
thlp2 = 0.20000000000000001
Skw = -2.0000000000000000
wp3 = -0.32863353450309962
Skrt = -0.25000000000000000
rtp3 = -7.0710678118654745E-010
Skthl = -3.5000000000000000
thlp3 = -0.31304951684997062
wprtp = 5.0000000000000002E-005
wpthlp = 5.0000000000000001E-003
rtpthlp = 5.6920997883030825E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 6:
wm = -1.0000000000000000E-002
rtm = 5.0000000000000001E-003
thlm = 305.00000000000000
wp2 = 1.0000000000000000
rtp2 = 4.9999999999999998E-007
thlp2 = 0.10000000000000001
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -2.0124611797498108E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 7:
wm = 0.20000000000000001
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 0.25000000000000000
rtp2 = 5.0000000000000004E-006
thlp2 = 0.14999999999999999
Skw = 0.75000000000000000
wp3 = 9.3750000000000000E-002
Skrt = 3.0000000000000000
rtp3 = 3.3541019662496846E-008
Skthl = -0.50000000000000000
thlp3 = -2.9047375096555625E-002
wprtp = 5.0000000000000002E-005
wpthlp = -5.0000000000000001E-003
rtpthlp = -7.7942286340599491E-004
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 8:
wm = -2.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.0000000000000001E-016
thlp2 = 1.0000000000000000E-004
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = 0.0000000000000000
rtp3 = 0.0000000000000000
Skthl = 0.0000000000000000
thlp3 = 0.0000000000000000
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 9.0000000000000012E-011
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 9:
wm = 1.0000000000000000E-003
rtm = 1.0000000000000000E-002
thlm = 305.00000000000000
wp2 = 4.0000000000000002E-004
rtp2 = 1.9999999999999999E-006
thlp2 = 0.69999999999999996
Skw = 0.0000000000000000
wp3 = 0.0000000000000000
Skrt = -1.0000000000000000
rtp3 = -2.8284271247461898E-009
Skthl = -2.0000000000000000
thlp3 = -1.1713240371477056
wprtp = 0.0000000000000000
wpthlp = 0.0000000000000000
rtpthlp = 1.0648943609579309E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
PDF parameter set 10 (randomly generated):
Random seed values = 2026 7 3 -300 10 42 43 334
wm = -2.8930441743699964E-002
rtm = 3.3461045115218361E-003
thlm = 292.50540141951438
wp2 = 0.78110192440628812
rtp2 = 2.6025299053024031E-006
thlp2 = 0.63949060084349207
Skw = -3.7784467304497396
wp3 = -2.6084040476934947
Skrt = 3.1631511998149451
rtp3 = 1.3280473047869945E-008
Skthl = -0.75428222802986600
thlp3 = -0.38573151563353525
wprtp = 8.0197310200014161E-004
wpthlp = 0.11334331585588316
rtpthlp = 1.1610674676402494E-003
Running tests for the above parameter set for all combinations of F_w and zeta_w for the setting variable. F_w values are 0 (or 1.0 x 10^-5), 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1. Zeta_w values are 0, -1/2, 1, -1/3, 1/2, -1/5, 1/4, -9/10, 9, -3/4, and 3.
Running tests for the above parameter set for the full PDF (the setting of F and zeta values is handled internally).
Success!
Performing spurious source unit test
====================================
Test 1
Vertical integral of <rt> before advance_xm_wpxp = 28.316670259590918
Vertical integral of <rt> after advance_xm_wpxp = 28.454761250379857
Vertical integral of <rt> forcing = -3.9696697370157397E-005
Flux of <rt> at the surface = 5.0000000000000001E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -4.6159907493570351E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 793918.42642888101
Vertical integral of <thl> after advance_xm_wpxp = 793908.03522151231
Vertical integral of <thl> forcing = -4.4637357896125940E-002
Flux of <thl> at the surface = 1.0000000000000000E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = 4.7534892688716468E-013
The spurious source of <thl> is within acceptable limits.
Test 2
Vertical integral of <rt> before advance_xm_wpxp = 15.172156437028869
Vertical integral of <rt> after advance_xm_wpxp = 15.195684253094468
Vertical integral of <rt> forcing = -3.6218822720338590E-005
Flux of <rt> at the surface = 1.1464487627233422E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = 1.3552527156068805E-019
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 790700.55946653988
Vertical integral of <thl> after advance_xm_wpxp = 790692.21652176871
Vertical integral of <thl> forcing = -3.0102713427579468E-002
Flux of <thl> at the surface = 2.2928975254466843E-003
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -1.7599567636583657E-012
The spurious source of <thl> is within acceptable limits.
Test 3
Vertical integral of <rt> before advance_xm_wpxp = 23.571709863078247
Vertical integral of <rt> after advance_xm_wpxp = 23.568597797371510
Vertical integral of <rt> forcing = -4.0795686238177352E-005
Flux of <rt> at the surface = 3.0422133882386125E-005
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -8.0637536578609392E-019
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 792264.58981438889
Vertical integral of <thl> after advance_xm_wpxp = 792249.45751495706
Vertical integral of <thl> forcing = -5.1049440784032736E-002
Flux of <thl> at the surface = 6.0844267764772249E-004
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = 2.7665369994878120E-013
The spurious source of <thl> is within acceptable limits.
Test 4
Vertical integral of <rt> before advance_xm_wpxp = 34.151196122625741
Vertical integral of <rt> after advance_xm_wpxp = 34.421684499945812
Vertical integral of <rt> forcing = -3.9275479552477216E-005
Flux of <rt> at the surface = 9.4090340395280771E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = -9.5206503271383358E-017
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 797257.06825032877
Vertical integral of <thl> after advance_xm_wpxp = 797250.43997009424
Vertical integral of <thl> forcing = -4.0912335528331401E-002
Flux of <thl> at the surface = 1.8818068079056154E-002
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = 8.6484985839518913E-013
The spurious source of <thl> is within acceptable limits.
Test 5
Vertical integral of <rt> before advance_xm_wpxp = 13.730415896369760
Vertical integral of <rt> after advance_xm_wpxp = 13.822821082276050
Vertical integral of <rt> forcing = -1.4868220133011372E-005
Flux of <rt> at the surface = 3.2288550648731207E-004
Flux of <rt> at the top of the domain = 0.0000000000000000
Spurious source of <rt> = 1.4941661189565858E-018
The spurious source of <rt> is within acceptable limits.
Vertical integral of <thl> before advance_xm_wpxp = 786390.84252176853
Vertical integral of <thl> after advance_xm_wpxp = 786387.20450284367
Vertical integral of <thl> forcing = -1.8584439878506432E-002
Flux of <thl> at the surface = 6.4577101297462417E-003
Flux of <thl> at the top of the domain = 0.0000000000000000
Spurious source of <thl> = -7.7098397111008410E-013
The spurious source of <thl> is within acceptable limits.
Success!
Running tuner tests
-------------------
goldstein_price pass
rastrigin pass
himmelblau pass
eggholder pass
schaffer pass
==================================================
Performing 'mean vertical velocity in clouds' tests
Success!
==================================================
==================================================
Performing 'Smooth Heaviside Peskin' tests
Case 1: heaviside_smth_range = 0, smooth Heaviside collapses to Heaviside
Input: -1.0000000000000000 -1.0000000000000000E-010 1.0000000000000000E-010 1.0000000000000000
Expected outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000 1.0000000000000000
True outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000 1.0000000000000000
Case 2: heaviside_smth_range = 2.0000000000000000
Input: -2.0000000001000000 -1.0000000000000000 1.0000000000000000 2.0000000001000000
Expected outcome: 0.0000000000000000 9.0845056908100005E-002 0.90915494309000000 1.0000000000000000
True outcome: 0.0000000000000000 9.0845056909999999E-002 0.90915494309000000 1.0000000000000000
Success!
==================================================
==================================================
Performing 'Smooth Min / Max' tests
Input: -1.0000000000000000 -1.0000000000000000E-010 1.0000000000000000E-010 1.0000000000000000
(Simple) min:
Expected outcome: -1.0000000000000000 -1.0000000000000000E-010 0.0000000000000000 0.0000000000000000
True outcome: -1.0000000000000000 -1.0000000000000000E-010 0.0000000000000000 0.0000000000000000
(Simple) max:
Expected outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000E-010 1.0000000000000000
True outcome: 0.0000000000000000 0.0000000000000000 1.0000000000000000E-010 1.0000000000000000
Input: -2.0000000001000000 -1.0000000000000000 1.0000000000000000 2.0000000001000000
Smooth min:
Expected outcome: -2.2247448714824141 -1.3660254037844388 -0.36602540378443871 -0.22474487138241406
True outcome: -2.2247448714824136 -1.3660254037844388 -0.36602540378443871 -0.22474487138241384
Smooth max:
Expected outcome: 0.22474487138241406 0.36602540378443871 1.3660254037844388 2.2247448714824141
True outcome: 0.22474487138241384 0.36602540378443871 1.3660254037844388 2.2247448714824136
Testing smooth min and max with min_max_smth_mag=1e-7, input_var1 = equidistant grid on [-1, 1), input_var2 = 0
Input: 1.0000000000000000 10.000000000000000 100.00000000000000 1000.0000000000000
Smooth min:
Expected outcome: -1.1180339887498949 -1.0226805085936306 -1.0024751868658441 -1.0002497501874359
True outcome: -1.1180339887498949 -1.0226805085936306 -1.0024751868658441 -1.0002497501874359
Smooth max:
Expected outcome: 1.1180339887498949 1.0226805085936306 1.0024751868658441 1.0002497501874359
True outcome: 1.1180339887498949 1.0226805085936306 1.0024751868658441 1.0002497501874359
Fatal error in CLUBB - MPI Process 1 / Chunk index 1
Column index not available. Latitude/Longitude for column 1: ******/******
Latitude range from -90 to 90 degrees, Longitude range from -180 to 180 degrees
Error in ADG1_w_closure: wp2 must not be less than the w tolerance value.
Fatal error in CLUBB - MPI Process 1 / Chunk index 1
Column index not available. Latitude/Longitude for column 1: ******/******
Latitude range from -90 to 90 degrees, Longitude range from -180 to 180 degrees
Error in ADG1_ADG2_responder_params: xp2 must not be less than its tolerance value.
Input_var1: -1000000.0000000000 -10000000.000000000 -100000000.00000000 -1000000000.0000000
Input_var2: 1.0000000000000000 10.000000000000000 100.00000000000000 1000.0000000000000
Smooth min:
Expected outcome: -1000000.0000002501 -10000000.000000026 -100000000.00000000 -1000000000.0000000
True outcome: -1000000.0000002501 -10000000.000000026 -100000000.00000000 -1000000000.0000000
Smooth max:
Expected outcome: 1.0000002500019036 10.000000025145710 100.00000000000000 1000.0000000000000
True outcome: 1.0000002500019036 10.000000025145710 100.00000000000000 1000.0000000000000
Input_var1: -1000000.0000000000
Input_var2: 1.0000000000000000
Smooth min:
Expected outcome: -1000000.0000002501
True outcome: -1000000.0000002501
Smooth max:
Expected outcome: 1.0000002500019036
True outcome: 1.0000002500019036
Success!
==================================================
====================== Running fill holes tests ======================
-------------- easy_fill_test --------------
--- Testing fill type: global ---
--- Testing fill type: sliding_window ---
--- Testing fill type: widening_windows ---
--- Testing fill type: smart_window ---
--- Testing fill type: smart_window_smooth ---
--- Testing fill type: parallel ---
PASS: easy_fill_test
-----------------------------------------------
-------------- below_thresh_test --------------
--- Testing fill type: global ---
--- Testing fill type: sliding_window ---
--- Testing fill type: widening_windows ---
--- Testing fill type: smart_window ---
--- Testing fill type: smart_window_smooth ---
--- Testing fill type: parallel ---
PASS: below_thresh_test
-----------------------------------------------
====================== End fill holes tests ======================
Running /home/jenkins/workspace/clubb_G_unit_reverse_dir_grid_test/install/latest/G_unit_tests ...
All tests have succeeded.
